orbitor uk used for sale

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

Manufacturer: Orbotech Model: Ultra Discovery VM Year of Manufacture: 2011 Ultra Discovery VM delivers simple, intelligent, and powerful AOI performance with 10 µm line/space inspection capabilities for FC-BGA, PBGA, CSP, and COF production. Delivering super clear images essential for capturing the finest defects, the system achieves outstanding AOI results with minimal effort or training, even on complicated panels. Most of the manufacturer’s valuable time on the system is spent inspecting panels. Logic false calls are virtually eliminated and overall false calls are minimized, saving precious verification time. Benefits - High throughput and superior detection with a minimal number of false calls - Especially designed for inspection of the finest lines down to 10 µm - Quick setup even for the most complicated jobs for higher productivity - Automation ready - Very high uptime  ...

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Specifications: Tube outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W Feed module AVM 0.1 - 2.3 rpm incl. feeding unit and auxiliary unit used, in good condition.

Sartorius Certomat BS-1 50mm Heated and Refrigerated Incubator Orbital Shaker 8865329 50 mm Orbital stirring mode: 50 mm diameter Stirring speed: 40 to 400 rpm Max. accuracy ±1% of the final value Incubation temperature: –10 °C to +70 °C External dimensions: 1150 x 720 x 770 mm Internal dimensions: 890 x 495 x 650 mm Weight: 198 kg Steel construction, stainless steel interior Brushless motor, triple eccentric drive with adjustable mass compensation Tray 800 x 420mm Max. load 20 kg, mass compensation depending on load Stacking Up to 3 units, without speed reduction Protection IP21 Electrical specifications Connection Class l cold socket, separate cable approx. 3 m Protection class l 230 V Heating capacity 650 W Cooling capacity 500 W In excellent working condition

Edmund Buhler orbital stirrer with stirring intensity and delay adjustment Elec: 230V 50/60Hz 0.2A Dimensions (mm): 670x610 H250mm Shaker Type: Orbital Min/Max Stirring Speed: 15/300 Internal dimensions (mm): 390x540mm H150mm Auction-ID: A1-50994-32

OHAUS ISHD23CDG refrigerated incubator with orbital agitation; ; OHAUS Agitator Incubator; ; Reference: ISHD23CDG; Year of manufacture: 2020; ; Movement: Orbital, 25 mm; Capacity: 22.7 kg at 125 rpm and 4.53 kg at 500 rpm; Temperature range: -15°C to 65°C; Uniformity: ± 0.5°C to 37°C; Speed range: 15 RPM to 500 RPM; Tray dimensions: 457 mm x 457 mm; Dimensions: 596 mm x 815 mm x 675 mm; Drive System: Triple Eccentric Brushless DC Motor; Internal dimensions (H x W x W): 432 mm x 523 mm x 629 mm; Net weight: 131.7 kg; Power supply: 220 V; Power consumption: 800 W; Safety certification: TÜV; Speed Accuracy: Above 100 RPM ± 1%, Below 100 RPM ± 1 RPM; Speed range: 15 to 500 rpm; Timer: 1 second to 160 hours; Housing: Aluminum; Operating Conditions: 15°C to 32°C, 80% RH, non-condensing; ; Internal reference: FA-2487; Auction-ID: A1-50994-1019

3-compartment orbital lab shaker for vials, jars, tubes, etc. Sold as is, untested Equipped: - 2 compartments with tray dimensions 800 x 600 mm - 1 compartment with tray and 6 530 mm long rollers adjustable in spacing. Dimensions of the tray: 800 x 600 mm - Variable speed for orbital stirring from 30 to 420 rpm - Timer from 0 to 120 minutes To put on a bench (not included) Electrical power: 500 watts Auction-ID: A1-51318-254

Star Ball Mill, Rotor Ball Mill, Centrifugal Ball Mill, Centrifugal Ball Mill Used. Manufacturer: EHINGER IMPIANTI Type: RM 150 Achievable grain sizes: with dynamic classifier: 0-20 μ and 0-300 μ with static selector 0-2 mm Average continuous output approx. 1.6 t of glass per hour Motor SIEMENS 75 kW 738 rpm 400 V Dimensions approx. 2850 x 4100 x 5000 mm original matching dust filter with fan The mill pictured serves only as a sample. The mill for sale is currently being revised. These mills are now being built by Eirich as an OrbitMill for the fine grinding of industrial minerals. Performance data of the Orbit Mill according to the manufacturer as an example of limestone. Air flow rate 13000 m³/h Limestone Throughput d97= 20 μm : 1.6 t/h d97= 40 μm : 3.3 t/h d97= 105 μm : 6.0 t/h The mill pictured was used in glass recycling. Four balls, which a ...

SECOND-HAND ORBITAL SANDER COMEC LC/20/AV - CE RULES - min/max diam. 10/160mm - with feeding units - volt. 400/80 - sn 010118 - year 2001

Orbital sander COMEC mod. LC20AV - CE rules - Adjustable feeding speed - Min/max. working diam. 30/150 mm. - Min. bending radius 200 mm. - Complete with feeding units - Year 2006

THERMO SCIENTIFIC MAXQ 3000 Platform/Orbital Shaker New equipment in its original packaging Model: SHKE3000-1CE MAX Q 3000 Speed: 40 to 400 rpm, ±10 rpm Timer: Continuous or timed from 1 to 60 min With tray / platform included - dimensions 76.2 x 45.7 cm thickness 8 mm Weight: 76 kg Dimensions: 74.7 x 24.6 x 65.5 cm

Orbital motor Manufacturer: Danfoss Article number: OMT 160 T OMT160T 151B3042 NEW and fully functional, from stock, see pictures for more details. Internal number: 602 209 397695596656

Ergonomic handle for comfortable and easy control Compact and lightweight design Lightweight housing with rubber coating Integrated air regulator to adjust sanding speed 6 mm orbital diameter for ultra-fine finishes Automatic rear suction Auction-ID: A7-50796-77

Ergonomic handle for comfortable and easy control Compact and lightweight design Lightweight housing with rubber coating Integrated air regulator to adjust sanding speed 6 mm orbital diameter for ultra-fine finishes Automatic rear suction Auction-ID: A7-50796-177

Ergonomic handle for comfortable and easy control Compact and lightweight design Lightweight housing with rubber coating Integrated air regulator to adjust sanding speed 6 mm orbital diameter for ultra-fine finishes Automatic rear suction Auction-ID: A7-50796-277

THERMO SCIENTIFIC MAXQ 3000 Platform/Orbital Stirrer; New equipment in its original packaging; Model: SHKE3000-1CE MAX Q 3000; Speed: 40 to 400 RPM, ±10 RPM; Timer: Continuous or timed from 1 to 60 min; With tray/platform included - dimensions 76.2 x 45.7 cm thickness 8 mm; Weight: 76 kg; dimensions: 74.7 x 24.6 x 65.5 cm; ; Internal reference: FA-2238; Auction-ID: A1-50994-1028

BIOBLOCK SCIENTIFIC Orbital Shaker Dimensions (mm) 345x350 H 200 Min/max stirring speed 30 / 420 Auction-ID: A1-50994-27

Ergonomic handle for comfortable and easy control Compact and lightweight design Lightweight housing with rubber coating Integrated air regulator to adjust sanding speed 6 mm orbital diameter for ultra-fine finishes Automatic rear suction Auction-ID: A7-50799-177

Ergonomic handle for comfortable and easy control Compact and lightweight design Lightweight housing with rubber coating Integrated air regulator to adjust sanding speed 6 mm orbital diameter for ultra-fine finishes Automatic rear suction Auction-ID: A7-50799-277

Ergonomic handle for comfortable and easy control Compact and lightweight design Lightweight housing with rubber coating Integrated air regulator to adjust sanding speed 6 mm orbital diameter for ultra-fine finishes Automatic rear suction Auction-ID: A7-50799-77

Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Auction-ID: A1-51276-739

Auction-ID: A1-51276-740

Auction-ID: A1-51276-865

Auction-ID: A1-51276-780

Auction-ID: A1-51276-862

Hydraulic motor Manufacturer: LöSi Hydraulik GmbH Model: EPMV 630 SH 3 General data: Swallowing volume [cm³/rev]: 629.1 Side connections 2x G1 inch BSPP Shaft: Serrated (16 teeth) Ø 53.98 mm 4-hole square flange (hole spacing: 200 mm) Technical data (for use in continuous operation): Max. speed: 320 rpm Max. torque: 1660 Nm Max. power output: 48 kW Max. oil flow: 200 l/min Max. inlet pressure: 210 bar Minimum speed: 6 rpm max. return pressure without leakage oil line or max. pressure in the leakage oil line = 60 bar The device is NEW and fully functional. see pictures for more details. Internal number: 603 141 603 143 603 144 603 145 603 158 257398523244 397695608456

In good working condition. Beautiful condition. Auction-ID: A3-46110-6197

Weight approx.: 1300 kg Auction-ID: A1-51519-1171

Registration certificate NOT available, certificate of conformity available Remark: Moto does not start - Operation unknown restoration project. Has been standing still for 2 years. Damage to fairing. For parts or demolition. Auction-ID: A3-46100-1008

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

Number of sanding units: 10 St. sanding width: 25-240 mm Sanding height max.: 15-140 mm MB ROBA Fentech ORBITAL, fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine wood sanding - Impregnation sanding - Intermediate lacquer sanding Advantages of the ROBA Fentech principle: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm sanding tool diameter optimizes sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a through-feed machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design  ...

Top condition, completely serviced and checked, built in 2018 incl. 2 backing pumps, IonMax source, HESI sample, PC and SW. THERMO Q-Exactive HF-X High Field Orbitrap High-resolution mass spectrometer for the analysis of proteins, peptides, lipids, glycans and small molecules. The Q Exactive RF system combines a segmented quadrupole for high-performance precursor ion selection with an ultra-high-field Orbitrap mass analyzer with high resolution and accurate mass determination (HR/AM) for an optimal combination of scanning speed, resolution, mass accuracy, spectral quality, and sensitivity. I Identify, quantify and confirm components in a single analysis with the Q-Exactive HFX mass spectrometer.

Slicer Treif -Model: DIVIDER Orbital+ -Power: 7.5 kW -Year of manufacture: 2014 -Capacity: up to 1200 cuts/min -Max. slice thickness: 0.5–25 mm -Max. product length: 850 mm -Belt width: 420 mm -Includes a knife sharpener -Knife sharpener model: HS DIVIDER ORBITAL -Outer dimensions of the sharpener: 580 x 640 x 400 mm -Sharpener year of manufacture: 2015 -Power supply: 380V 3Ph 50Hz -Suitable for slicing: meat, cheese, fish -Made of stainless steel -Outer dimensions: 3200 x 1200 x 2350 mm -Weight: 850 kg -Condition: Used in very good condition, ready to work

Thermo Scientific LTQ Orbitrap - Hybrid Ion Trap Mass Spectrometer LC/MSn in high resolution at an affordable price! Including: Ion Max ESI Source, HCD Collision Cell, backing pumps and Thermoflex 900 chiller. Fully tested with 3 months warranty. HPLC / UPLC / nanoLC available for an extra charge, installation in D/A/CH/NL possible.

From a current exploitation we offer you an xyz. Year of construction: 2024 Condition: young used Original price: 622.500,00 EUR Equipment / accessories / other information: NIR Plus Package QUANTIMETER Yield Measurement Activation NIR Ingredient Determination Corn Cutting length adjustment, automatic Near-infrared sensor (NIR) for PREMIUM LINE Wizard Package Variable attachment drive incl. preparation DIRECT DISC Discharge manifold lighting LED, synchr. schwenkb. w. manifold flap Steering angle sensor Dynamic steering CEMOS AUTO PERFORMANCE Camera system, prepared AUTO FILL trolley filling system with CEBIS display GPS PILOT Ready Digital Package II - CEMIS Machine connect license SAT 900 GNSS receiver SAT 900 GNSS Receiver - SATCOR 15 Networked Documentation License 50 Years of JAGUAR Gutfluss XL PREMIUM LINE professional Counter Blade Universal PREMIUM LINE ...

TREIF

Ref. №: 4386 Automatic slicer 1 long portioning conveyor, approx. 2,800 mm, belt width 410 mm Maximum cut-off length (mm/inch) 0.1–55 mm Maximum value of cuts/min.: 300 Maximum infeed length 800 mm Circular blade diameter: 420 mm Cross section of product w x h (mm/inch) 280 x 160 1 standard gripper, height approx. 100 mm, width approx. 180 mm Maximum stacking height (mm)100 Connecting load (kW) 4.8 Machine dimensions in mm: Width: 1000 Length: 3800 Height: 2200 Weight: Approx. 820 kg

Hydraulic pump, oil pump, drive motor, steering unit, steering orbitrol, steering unit, steering servo, steering motor, steering assembly, steering orbitrol -Manufacturer: Mannesmann Rexroth, steering unit steering orbitrol -Type: LAGS 40 N12/190-80M40-111S -Nominal pressure: 175 bar -Dimensions: 345/90/H160 mm -Weight: 8 kg

Edmund Buehler orbital agitator, With agitation intensity adjustment and timer, Elec: 230V 50/60Hz 0.2A, Dimensions (mm): 670x610 H250mm, Type of agitator: Orbital, Minimum / maximum agitation speed: 15 / 300, Internal dimensions (mm): 390x540mm H150mm, Agitator type: Orbital, Minimum / maximum stirring speed: 15/300, Minimum / maximum stirring height: 30 / 420

Riveting machine, radial riveting unit, riveting unit, orbital riveting machine, radial spot riveting machine, orbital riveting head, riveting head -Manufacturer: FMW, orbital riveting machine type HN1 -Shaft diameter: 12 mm -Motor: 0.37 kW 1390 rpm -Protrusion: 170 mm -Table dimensions: 300 x 250 mm -Stroke: 35 mm -Dimensions: 580/385/H670 mm -Weight: 119 kg

Number of sanding units: 8 St. sanding width: 25-240 mm Sanding height max.: 15-140 mm B ROBA Fentech, Fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine sanding of wood - Sanding after impregnation - Intermediate lacquer sanding Advantages of the ROBA Fentech system: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm diameter sanding tools optimize sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a straight-through machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design  ...