opti used for sale

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...

Technical data Longitudinal way of table: 250 mm Vertical adjustment of grinding head: 100 mm Transversal way of grinding head: 100 mm Slewing range of grinding head: vertical: - 15 ° Grinding spindle speeds: stepless from: 6000 rpm up to: 50000 rpm Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 0.660 kW Machine´s weight about: 500 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1300 mm Various accessories: Microscope Microscopeholder Work piece spindle head Grinding stroke drive

Technical data Voltage: 220 Volt Grinding spindle motor: 0.25 kW Machine´s weight about: 20 kg Overall dimensions machine: Length: 500 mm Width: 200 mm Height: 250 mm

Technical data Centre height: 76 mm Distance between centres: 160 mm Taper in spindle: 3 MT Overall dimensions machine: Length: 720 mm Width: 210 mm Height: 215 mm

Ready for operation with 2 sets of new impact strips

Coating machine ensuring perfect and uniform coating of products. A conveyor belt transports the product, which is submerged by a 4-cascade curtain to ensure full coverage of the product. The bottom of the product is covered during passage through an immersion device. The speed of the conveyor belt can be adjusted by the frequency inverter. The correct amount of batter can be adjusted with a valve on the feed. A specially designed hygienic fan blows the excess beater over the top of the product while the excess dough at the bottom is removed by an additional scraper or bottom vent. The blowing speed is controlled by frequency inverter and can be adjusted according to the application. - Production of high-quality products and extended production runs - 4-layer curtain for full coverage - Adjustable treadmill speed via variable speed drive - The amount of batter can be adjusted wi ...

Professional formatting saw for solid wood with inclination. Technical parameters: Maximum saw blade diameter: ø 400/30 mm Main motor power: 3 kW (can be 4 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 140 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the iron table: 800 x 550 mm Aluminum formatting sable: 1200 × 360 mm Cutting length: 1200 mm Weight of the machine: 400 kg Description of the machine: 1) Quality casting core 2) Hardened rod formatting table (Altendorf principle) 3) Large cutting height 4) High quality Italian motor with electromagnetic mechanical brake

Used dough divider / bread roll press EBERHARDT, Type: Optimat - including 4 casters - Maximum dough layer: up to approx. 3,200 g - technically tested and cleaned - immediately ready for use The machine is in good condition and ready for immediate use. Viewing and test run are possible by arrangement.

Key data: 400 mm, 1100 mm, 4500 1/min

Machine Details Stock-No. 1105-03940 Type of machine Lathe - cycle-controled Make SOMAB Type OPTIMAB 450 Year of manufacture 2007 Type of control NC Storage location HAGUENAU FRANCE Country of origin France Delivery time immediately Freight basis EX STOCK Technical details turning diameter 400 mm turning length 1100 mm control SOMAB PL + S NUM 1060 turning dia. over face-slide 350 mm turning diameter over cross slideways 320 mm main drive motor 12 kW spindle turning speed range 4500 rpm Spindle Passage 73 mm Chucking diameter 250 mm taper in tailstock MT 4 total power requirement 23 kW weight of the machine approx. 5 t Additional information Machine in inclined bed execution with NUM-SOMAB PL+S3 cycle control with 12 POSTES TURRET

Machine Details Warehouse number 1105-03634 Machine type lathe - cycle controlled Make CAZENEUVE Type OPTICA 360 Year of construction 2000 Control type CNC Control CNC NUM Storage location FRANCE HAGUENAU Country of origin France Delivery time immediately Freight base EX WAREHOUSE Technical details Turning diameter 380 mm Turning length 750 mm Control CNC NUM Turning diameter above the face sled 200 mm Turning diameter via transverse guide 280 mm Main drive motor 11 kW Spindle speeds 2 - 3000 rpm Spindle passage 54 mm Chuck diameter 160 mm Tailstock cone MK 4 Total power requirement 14 kW Machine weight approx. 2 t Information TAECH IN CNC MACHINE CAZENEUVE OPTICA 360 FROM 2000 3 BAKING FEED TAILSTOCK

Key data: 500 mm, 160 mm

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...

Mazak Optiplex Nexus 3015 Fiber Laser Cutting Machine 3000 mm x 1500 mm Power : 4000 W Machine is in excellent condition

ICP OES Perkin Elmer Optima 7000 DV The Optima™ 7000 DV ICP-OES system brings advanced technology to laboratories requiring flexibility and excellent analytical performance for varied and moderate sample loads. Auto sampler

Equipment: - Quick-change gluing part for hot melt adhesive - Autom. Edge magazine with roll plate - Pressure zone with pneum. pressurized pressure roller and 2 free-running repressure rollers - Power Control PC 20+ control - Inlet ruler adjustable - Joining milling unit 2 x 2.2 kW - pneum. Adjustment caps, drawing blade, program adjustment side button rollers and pneum. 2-point adjustment vertical probe rollers - Cross-cut unit 2 x 0.18 kW - Milling unit 2 x 0.55 kW - Mould milling unit 1 x 0.35 kW - Drawing blade unit for PVC edges - Surface drawing blade glue joint - Cleaning agent specification workpiece - Schwabbelaggregat Specifications Edge thickness 0.4 - 8 mm Roller cutting max. 3 x 45 mm or 0.8 x 65 mm Workpiece thickness 8 - 60 mm Feed max. approx. 11 m/min. Electrics 400 V - 3 Ph. - 50 Hz Connection value approx. 10.5 kW Pneumatic connection 6 bar To ...

SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...

Protec development machine (wet) Optimax

Used packaging machine by Variovac, type Optimus. New 2008. The VARIOVAC Optimus allows you to enter the field of economical and automated packaging of food, non-food and medical products. Whether you want to vacuum pack, protective atmosphere pack, SKIN pack, shrink pack or fill with hot products - the Optimus excels in all areas. With compact dimensions from 3m in length, it ensures reliable and efficient quality packaging! In its range of technology and performance, it sets the standard. Like all other VARIOVAC machines, Optimus uses the highly efficient VARIOVAC RapidAirSystem. Connection values: - Mains voltage 230/400 V, - Current consumption 21 A, - 12 kW power, - Frequency 50 Hz, - Control voltage 24 V, - Mains protection 32 A. Technical data: - Stroke mechanism: Pneumatic, - Protection class: IP 54, - Weight: 900 kg, - Noise level: 66 dB, - Vacuum pump: 10 ...

For sale is a laminating resin system from IMT SpraySystems. The plant is in very good condition, it has been properly shut down by personnel of the machine manufacturer and filled with mesamol for protection. New price of the system is 85000.-€. The system was cleaned and visually prepared. Circuit diagram, operating instructions and maintenance overview are available. The systems were regularly inspected by the manufacturer as part of a maintenance plan. Applications: Wind power (offshore and onshore) Shipbuilding Lightweight construction Automobile industry Railways (e.g. for the sealing of track beds) Aircraft construction (especially for the construction of the individual components) Corrosion protection Concrete renovation Chemical Resistant Equipment Wastewater (especially in the sewerage system) On request, at an additional cost, the machine can undergo factor ...

HEXAGON OPTIV CLASSIC 321 GL tp optic measuring machine was built in 2009 in Switzerland. This technologically advanced machine is the best solution for highly accurate measurement and inspection of e.g. electronic parts, micro-hole dies, fibre optics and inkjet nozzles. Thanks to the use of an 8-segment LED ring light with RGB colour sensitivity adjustment, the HEXAGON vision measuring machine detects and captures the edges of coloured parts much more easily compared to standard greyscale or lighting modifications. The offered machine also features, among other things, a 3 axes microprocessor CNC with vector path control, a CCD camera with 6.5x zoom and PC-DMIS Vision metrology software with the innovative MultiCapture function, which finds all 2D characteristics in the field of view simultaneously, increasing the inspection speed by up to 50%. The total weight of the machine is 170 kg. ...

– after technical inspection – year of manufacture 2004 – declaration of conformity, DTR – German production TECHNICAL PARAMETERS: min./max. element input length 800 / 3500 mm .max. input width of the element 200 mm min./max. element input thickness 12 / 80 mm type of hard/soft wood cutting to the line wood classification .max. feed speed 120 m/min acceleration 5 m/s saw diameter fi 500 mm saw bore diameter 30 mm number of spindle revolutions of the saw 4600 U/min duration of 1 cycle 0.7 - 1.2 sec driven transporter at the entrance and marking station with side tables for two marking belt conveyor total power 15 kW length measurement – fluorescent camera for 3 quality receiving station – conveyor belt total length 8300 mm connection diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

– year of production 1998 –optimization – cutting to the line – width measurement – possibility of cutting aluminum TECHNICAL PARAMETERS: .max. cutting length 4000 mm Min. element 200 mm .max. cutting height 100 mm .max. cutting width 260 mm disc diameter 500 mm engine power 9 kW feed speed max. 160 m/min acceleration 2 m/s2 optimization in relation to length and value pneumatic material pressure three ejectors drop tables rotary table total length 2000 cm transport dimensions (L/W/H) 1300 / 245 / 220 cm weight 3500 kg

– after technical inspection – German production – year of manufacture 2005 TECHNICAL PARAMETERS: .max. length of cut material 4500 mm .max. width 360 mm .max. height 160 mm automatic length measurement optimization in 4 quality classes total power 13 kW disc motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500 mm OptiCom Assist control receiving conveyor 5600 mm two ejectors overall length 13 m printer for marking elements cutting accuracy +/- 0.5 mm transport dimensions (L/W/H) 600 / 240 / 190 cm weight ~ 1800 kg

I will sell the membrane press Friz optimat MFP with a boot device.

- DOCUMENTS AND MANUALS INCLUDED WE ORGANIZE SHIPPING AS WELL Max. concentricity errors at 300 mm: 0.008 mm RS232 / USB : interface Measuring range diameter (x) 310 mm Application range height (z) 320 mm Weight 90 Kg Max. tolerated errors (mechanical) 0.003 mm Max. tolerated errors (vision system) 0.005 mm Max. radius measurements < 5% - Max. angle measurements errors < 0.2° Max. concentricity errors adapter 0.002 mm Max. resolution 0.001 mm Max. manual moving speed 1 m/s INSERT CONUS MK5 IT WAS USED BY LATHE CNC DOOSAN PUMA

Printing machine with Secare roll winder Manufacturer F & K Type Optima AV II 3 colors Print width 850 mm Material width = 900 mm Rapport = 233 - 800 mm, with colour continuation, central lift-off , central lubrication, longitudinal and transverse registers, Speed 220 m/min, Unwinder Max Durckmesser = 1000 mm Sleeve = 50 -80 mm Rewinder Max diameter = 150 -250 mm, sleeve = 50 mm, with accessories.

Amada Optiplex Nexus 3015 Fiber Laser Cutting Machine 3000 mm x 1500 mm Power : 3 KW Machine is in good working condition

This Mazak OPTIPLEX 3015 II Laser cutting machine was manufactured in the year 2016. It is equipped with a Mazatrol PREVIEW 3 control unit. The machine has a laser power of 4 kW.

This Mazak Optiplex Nexus 3015 Laser cutting machine was manufactured in the year 2016 and has 11735 production hours. It is equipped with a Mazatrol Preview 3 control unit. The machine has a laser power of 2,5 kW.

This Busellato Jet Optima T5 Wood working machine was manufactured in the year 2018. It is equipped with a TPA control unit and has 5 axis.

Cutting piece size: 3000 x 1500 mm; Cutting thickness for steel: 22 mm; Cutting thickness for stainless steel: 12 mm; Aluminum cutting thickness: 10mm; Installed machine power: 76Kva; Equipments: 2 cutting heads 5'' - 7.5 CNC Preview 2 Automatic Head Changer Automatic Nozzle Changer Pallet Changer System: 2 Pallets Ball Lifting System on Pallet Changer Automatic Chip Conveyor DONALSDON Steam Extraction System Cooling System; Excluding transport, without handling, without software

Without hose package

Fully automatic bread roll press; with several knitting plates; Lacquered version

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

Grinding range X/Y/Z: 600mm/375mm/375mm, grinding wheel: 300mm/50mm/76.2mm, max. table load: 300kg, table clamping surface X/Y: 900mm/350mm, weight: 3300kg. Including hydraulic system, self-made extraction system. X/Y/Z axes limited in function. Documentation available. On-site inspection is possible.

Cutting range round/ rectangular: 180/ 180x300mm, saw blade speed: 22-65m/min, saw blade dimensions: 2362x20x0.9mm.

Length: 11,250mm, width: 5250mm, height: 2600mm.

Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW.

Max. workpiece dimensions: 3000x1050mm, connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm.

Current: 50A, nominal voltage: 400V.

Current: 63A, nominal voltage: 400V.

Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly.

Table dimensions: 3200x6000mm, weight: 6.5t, available in February 2023.

Dimter Opticut 302 Optimizer Cutting out errors and fixed lengths The machine after a comprehensive overhaul in 2019 Year of Build 2000

Key data: 520

Sensational DIMTER optimizer OPTICUT 200 ELIT Machine from the production line, Complete machine, to it we will give a set of inlet tables, as well as a complete outlet. Measuring station, everything included Machine not running. Connect electronically and pneumatically, run the program At the customer's request, we can arrange it for a fee. Machine after mechanical overhaul in our plant If you have any questions, feel free

Goebel OPTIFORMA 520 Year 1985 Size: Width 520mm Unwind 5 printing units wet offset 4 bays in 25 inches Filing Hole Cross Perforation Cylinder Display: roll/roll roll/fold Machine is in production

Optical 3D coordinate measuring machine consisting of control unit VL-350, measuring head VL-370 and base VL-360. The meter was rarely used and is in very good condition., software: Version 1.3.0.235

THERMOFORMER, ULMA, TYPE: TF-OPTIMA Technical description: Format: (x4) 114 x 159 mm Power supply: 380-440 V/50-60 Hz Power : 30 kW Dimensions: 6600 x 1100 x 2050 mm

Meat grinder Mado Optimo 2, type MEW 624, 114 stuffing grinder, Machine in stainless steel, 2 speeds, Removable screw housing, with reverse operation, Connection 400V, 6kW, year of construction 2008, Dimensions LxWxH approx. 107x72x115cm, weight approx. 247kg, good used condition, fully functional