We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,948 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Attachment: Chamber filter press used semi mobile Model: pilot plant on platform mounted Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 20 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Filter surface: approx. 4.72 m m² Presses contents: approx. 56 dm m³ PCB package length: 1024 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Pumps: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Condition: It is a complete semi-mobile system on platform mounted, incl. control cabinet as full drainage system. This compact drainage system is easy to transport and can be taken in a very short time in operation. Appendix: Selling without trailer You want to rent this fac ...
used
Attachment: Chamber filter press used Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 30 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Procedure: open Open filter surface: approx. 7.5 m square Presses contents: approx. 90 dm m³ PCB package length: approx. 1512 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Hydraulic pump: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Safety equipment: optional Optional accessories: optional possible depending on design Extensions: In consultation according to the design Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delive ...
new
Technische Daten: - Verfahrbereich X - Achse 3700 mm - Verfahrbereich Y - Achse 1600 mm - Verfahrbereich Z - Achse 200 mm - Arbeitsbereich X - Achse 3685 mm - Arbeitsbereich Y - Achse 1550 mm - Arbeitsbereich Z - Achse 70 mm - Lade- Entladegeschindigkeit 15 m/min - Frässpindel luftgekühlt HSD / Italy 9.6 kw, HSK 63 (Option 11 kW HSK 63F) - Spindel Drehzahl stufenlos 24.000 rpm - Werkzeugwechsler,Karusell 8-fach, mitfahrend - Bohraggragat VERTIKAL 5 + 4 FAM / Italian 5 Spindeln in Y-Richtung, Bohrabstand 32 mm 5 Spindeln in X-Richtung, Bohrabstand 32 mm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren AC Servo Motoren YASKAWA - hochgenaue THK Linearführungen mit Langzeitschmiereinheit in X, Y, Z Achse - SHIMPO Getriebe Antrieb - max. Verfahrgeschwindigkeit 80 m/min - max. Arbeitsgeschwindigkeit 25 m/min - Arbeitsgenaui ...
used
Attachment: Chamber filter press used Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 26 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 9.7 m m² Presses contents: approx. 130 dm3 PCB package length: 1500 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Dimensions: Lxwxh Empty weight: Accessories: depending on the type and customer Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delivery. On these systems, we guarantee between 6 to 12 months. Condition: The plant is located in a very good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility ...
new
- Arbeitsbereich X - Achse 1500 mm - Arbeitsbereich Y - Achse 3000 mm - Arbeitsbereich Z - Achse 300 mm - Frässpindel luftgekühlt HITECO / Italy 9.5 kw, HSK 63F - Spindel Drehzahl stufenlos 24.000 rpm - Werkzeugwechsler 8-fach, seitlich - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren AC Servo Motoren Delta / YASKAWA - SHIMPO Getriebe Antrieb - max. Verfahrgeschwindigkeit 40 m/min - max. Arbeitsgeschwindigkeit 20 m/min - Arbeitsgenauigkeit 0.05 mm - Vakuum - Rastertisch mit 4 Sektionen und T-Nuten - BECKER Vakuumpumpe trockenlaufend, luftgekühlt, Leistung 129 m3/h - Werkstückpositionierung, pneumatisch absenkbare Anschläge je 2 Stück in X und Y - Werkzeuglängen Sensor - CAD/CAM Software VECTRIC 2D PRO (NESTING Inclusive) - Sicherheitslichtschranke Vorschrift nach EN 848-3 (Optional einseitig, zweiseitig oder dreise ...
used
SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer
used
Tube length: 48 - 140 cm Tube width: 30 - 70 cm Bottom width 7 - 16 cm 1 valve Bottom patch unit 1 or 2 colour on bottom patch Shingle pressing Option: S-Pressing, Icoma Still in operation: Yes Available: now
new
- Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 2500 mm - Arbeitsbereich Z - Achse 400 mm -B- Achse Frässpindel ist +/- 90C parallel zu X-Achse schwenkbar - Frässpindel luftgekühlt 5,5 kw - Spindel Drehzahl stufenlos 18.000 rpm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren AC Servo Motoren Delta / YASKAWA - SHIMPO Getriebe Antrieb - max. Verfahrgeschwindigkeit 40 m/min - max. Arbeitsgeschwindigkeit 20 m/min - Arbeitsgenauigkeit 0.05 mm - Vakuum - Rastertisch mit 4 Sektionen und T-Nuten - BECKER Vakuumpumpe trockenlaufend, luftgekühlt, Leistung 129 m3/h - Werkzeuglängen Sensor - CAD/CAM Software DDX EasyWOOD Standard - Steuerung OSAI - Schnittstelle Ethernet/USB/CompactFlash Card - Sicherheitslichtschranke Vorschrift nach EN 848-3 (Optional einseitig, zweiseitig oder dreiseitig je nach Aufstellungsgeg ...
size 59 x 74 cm Perfecting 8/0 - 4/4 Color-Pilot-Plus ink control system AIR Center (Rietschle) Technotrans temperation Technotrans combi cooling device with external condensator washing device for printing cylinder Quickstart Low Coverage stabilisation Powder (Hitronic) Inline Observer Optiprint Jackets preparation for colour temperation Non Stop semiautomat delivery Still in operation: Yes Available: sofort
new
Technische Daten: - max Arbeitsbreite 500 mm - Kettenbreite 500 mm - max. Schnitthöhe 170 mm - min. Schnitthöhe 10 mm - min. Werkstücklänge 740 mm - max. Sägeblatt ø 505 mm - min. Sägeblatt ø 405 mm - Bohrung Sägeblatt ø 80 mm - Spindel ø 60 mm ohne Büchse - Drehzahl 2600 Upm. - Vorschub 2,5 - 24 m/min. - Motor Sägewelle 75 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 81 kW - Spannung 400 V / 50 Hz - Digitalanzeige für Zufuhrgeschwindigkeit - schwenkbares Bedienpult in Augenhöhe - elektrisch angetriebenen Einzugswalze im Tisch mit pneumatisch getakteter Oberdruckwalze - optische Holzerkennung über Lichtschranke - elektrisch angetriebene Auszugswalze im Auslauf - schwere Rollenbahn im Ein- und Auslauf - harte chromierte Oberfläche der Transportkette - Sägebüchse mit einem Satz Flanschringe - Rückschlagsicherung - automatisches Schmiers ...
new
- Arbeitsbereich X - Achse 1100 mm - Arbeitsbereich Y - Achse 1800 mm - Arbeitsbereich Z - Achse 240 mm - 2 Drehsupporte inklusive 3-Backenfutter - max. Werkstückdurchmesser 400 mm - max. Werkstücklänge 1000 mm - max. Werkstück Gewicht 56 kg - Arbeitsgenauigkeit -+0,04/300 mm - stabiler Arbeitstisch höhenverstellbar 700 mm, belastbar bis 1500 kg - Max. Verfahrgeschwindigkeit 5500 mm/min - Max. Graviergeschwindigkeit 15000 mm/min - Frässpindel 2 x Motor 2,2 kW, Luftgekühlt - Spannzangen Werkzeugaufnahme Durchmesser 6 und 8 mm - Drehzahl Frässpindel 0 - 24000 U/min. - Antriebsmotoren Schrittmotoren - Spannung AC 230 V/50Hz - Führung in X,Y,Z Achse Rundführung - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Befehlssprache G-code - Steuerung DSP (Option MACH3 Steuerung) - Schnittstelle USB - Software VECTRIC CUT 2D PRO (NESTING I ...
used
folder creaser gluing machine double crease head, 1 head to use for perforation as option 3 folding pockets + gate fold glue system Format 50x100cm up to 480 grams machine very well suited for covers with flaps, heavy stock gate fold brochures etc optional pocket folding possible MHGraphics is Fidia dealer. we can organise installation and instruction by trained mechanic Available: immediately/sofort
new
Technische Daten: - Verfahrbereich X - Achse 2900 mm - Verfahrbereich Y - Achse 2160 mm - Verfahrbereich Z - Achse 200 mm - Arbeitsbereich X - Achse 2850 mm - Arbeitsbereich Y - Achse 2130 mm - Arbeitsbereich Z - Achse 70 mm - Lade- Entladegeschindigkeit 15 m/min - Frässpindel luftgekühlt HSD / Italy 9.6 Kw HSK 63 (Option 11 kW HSK 63F) - Spindel Drehzahl stufenlos 24.000 rpm - Werkzeugwechsler,Karusell 8-fach, mitfahrend - Bohraggragat VERTIKAL 5 + 4 FAM / Italian 5 Spindeln in Y-Richtung, Bohrabstand 32 mm 5 Spindeln in X-Richtung, Bohrabstand 32 mm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren AC Servo Motoren YASKAWA - hochgenaue THK Linearführungen mit Langzeitschmiereinheit in X, Y, Z Achse - SHIMPO Getriebe Antrieb - max. Verfahrgeschwindigkeit 80 m/min - max. Arbeitsgeschwindigkeit 25 m/min - Arbeitsgenauig ...
used
Machine completely reconditioned; Tube length: 56-164 cm Tube width: 35 - 70 cm Bottom width: 7,7 - 22 cm 1 or 2 valve units Shingle pressing belt Option: S-Pressing belt, Icoma Available: now
used
AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now
new
- Arbeitbreite 250 mm - max. Hobelhöhe 180 mm - Tischlänge 1085 mm - 3-Messerwelle inklusive 3 HSS Wendehobelmesser - Drehzahl 4800 U/min. - Motor 2,8 PS / 400 V - Abrichtanschlag 0C-45C schwenkbar - Absaugstutzen Durchmesser 100 mm - Abmessungen L=1500, B=500, H=900 mm - Gewicht 190 kg - Aluminiumanschlaglineal, neigbar und ordentlich feststellbar - Aluminiumschutz über der Messerwelle (Arbeitsschutz) - seitlich aufklappbare massive Graugusstische - stabiler Unterbau für hohe Standsicherheit - Vorschub wahlweise abstellbar - komfortable Schalter-Stecker Kombination - Stahlblech-Spänehaube für Dickenhobelbetrieb umklappbar - Absaugschlauchanschluss FI 100mm - optimal gelagerte Ein- und Auszugswalzen für optimalen Anpressdruck - Dickentischsäule selbstreinigend - einfaches Einstellen der Dickentischhöhe mit Handrad
size 700 x 1020 mm R26060/18 SAKURAI Siebdruckmaschine model: SCA 102 age: 1989 max. printing size: 700 x 1020 mm available: immediately automatic screen printing line, high speed cylinder special: min: 500 x 350 mm sheet transfer unit optical leading edge control mechanicaldouble sheet control PERFECTION high-performance dryer 1120/4: infeed 1100mm, 2 warm – and 2 cooling zones with UV-dryer MIRUS sheet stacker model SV etc. Available: sofort
new
Technische Daten: - Arbeitsbreite der unteren Leimwalze 450 mm - Arbeitsbreite der oberen Leimwalze: 250 mm - Arbeitsbreite der oberen Druckwalze: 150 mm - Durchmesser der Walzen: 2 x 140 mm - Auftragwalzen und Dosierbehälter bestehen aus dem Nirosta Material - Auftragsmenge: 150 - 200 g/m2 - Gummihart: 70 Shor - Geschwindigkeit: 20 m/min - Leistung: 2 x 0,25 kW - Steuerspannung: 24 V - Schutzklappe - mittels Hebels und Excenter wird die Leimauftragsmenge geregelt - der Leimbehälter und die Auftragwalze werden zum Reinigungszweke einfach aus der Leimauftragmaschine herausgenommen - auf der Eingangseite sind zwei Rollen mit Durchmesser 50 mm - auf der Ausgangseite sind zwei Axen mit Scheibenrollen (nicht angetrieben) - die Leimauftragmaschine ist sehr Stabil - CE Konformität - Gewicht 300 kg Option: - Geschwindigkeitsregulierung 5 - 50 m/min
used
AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now
used
Description Accessories available. Technical data: Tip height 185 mm Turning diameter in the offset 450 mm Turning diameter over bed 395 mm Turning diameter over slide 220 mm Length 310 mm of offset Top width 1000 mm 20 spindle speeds or optional 22-1500 rpm. Turning length 1000 mm
new
- Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 1300 mm - Arbeitsbereich Z - Achse 200 mm - Arbeitsgenauigkeit -+0,04/300 mm - Vakuum - Rastertisch mit 4 Sektionen und T-Nuten inklusive Vakuumpumpe - Max. Verfahrgeschwindigkeit 10000 mm/min - Max. Arbeitsgeschwindigkeit 6000 mm/min - Frässpindel Motor 2,2 kW / ISO 20, Wassergekühlt - Werkzeugwechsler 6-fach, seitlich - Spannzangen Werkzeugaufnahme Durchmesser 3, 6, 8,10,12 mm - Drehzahl Frässpindel 6000-18000 U/min. - Antriebsmotoren Schrittmotoren - Spannung 400 V/50Hz - Führung in X,Y Richtung Linearführung + Zahnstange - Führung in X, Z-Richtung Linearführung + Kugelrollspindel - Befehlssprache G-code - DSP Steuerung NK 105 (Option: Mach3 Steuerung, PC und Monitor) - CAD/CAM Software Vectric CUT2D PRO (NESTING Inclusive) - Werkstückpositionierung, pneumatisch absenkbare Anschläge 1 x Stück in X ,2 Stück in Y ...
new
- Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 2500 mm - Arbeitsbereich Z - Achse 300 mm - Frässpindel luftgekühlt 5,5 kw, ER 32 - Spindel Drehzahl stufenlos 18.000 rpm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren Step Motoren - SHIMPO Getriebe Antrieb - max. Verfahrgeschwindigkeit 22 m/min - max. Arbeitsgeschwindigkeit 15 m/min - Arbeitsgenauigkeit 0.05 mm - Vakuum - Rastertisch mit 4 Sektionen und T-Nuten - BECKER Vakuumpumpe trockenlaufend, luftgekühlt, Leistung 129 m3/h - Werkstückpositionierung, pneumatisch absenkbare Anschläge je 2 Stück in X und Y - Werkzeuglängen Sensor - Steuerung DSP (OPTION MACH3) - Schnittstelle USB - CAD/CAM Software VECTRIC CUT2D PRO (NESTING Inclusive) - Elektroanschluss 3 Phasen 400 V, 50 Hz - Betriebsumgebungstemperatur 0-45CC - Abmessungen Breite 2100 mm - Abmes ...
new
Weibert D51 Thickness Planer 510 mm new 510 mm planing width Planing height 250mm Electric height adjustment of the Thicknesser table Digital display of the planing height Four pillar guide of the Thicknesser table Thicknessing table cast iron planed 1150 x 510 mm Motor 5,5 KW 400V 50 Hz 5-8-10-16 m / min feed rate Suction connector 160 mm G & RO-D510-CE Options: 7.5 KW motor power Autom. Star - Delta connection 4 knife - TERSA wave 2 sliding rollers in the thicknessing table
new
Technical data: hydraulic undertable circular saw unit - drive power motor 7.5 kW- diameter saw blade Z=48x5 600 mm- diameter saw blade bore 30 mm- inclined working table Yes- Automatic rotation of the table -70C 0C+70C- Speed of rotation from / to 0C / 70 C 3s- Positioning accuracy +/- 0.2C- Pneumatic workpiece holder 2 pieces- Pneumatic side organizers 2 pieces- Safety cover via capping unit Yes- Cutting capacity at 0C: 160 x 310 mm, 80 x 390 mm- cutting capacity at 45C: 160 x 220 mm, 80 x 270 mm cutting capacity at 70C: 160 x 90 mm, 80 x 130 mm- minimum workpiece thickness 10 mm connection values - supply voltage 400 V / 50 Hz- Control voltage 24 V compressed air requirement at 8 bar per cycle approx. 8 Nl- Suction nozzle FI100 mm 2 pieces- Suction nozzle FI160 mm 1 piece- air speed Suction in center of nozzle approx. 25-35 m/s Electronically controlled slider:- Loading length: 6000 m ...
new
UniMaster STS, die Platz sparende Lösung mit stehendem Behälter! Serienmäßig mit allen Armaturen, wie Elektromagnetventil oder Druckschalter mit Entlastungsventil für vollautomatischen Betrieb, Motorschutz, Sicherheitsventil, Manometer, Rückschlagventil, Kondenswasser-Ablasshahn und Absperrhahn Keilriemengetriebenes 2-Zylinder-Aggregat mit zweistufiger Verdichtung für 10 bar Druck erhöht die Leistung und sichert einen hohen Wirkungsgrad. Zwischen- und Nachkühler sorgen für eine rasche Abkühlung der erzeugten Druckluft Großes Ventilatorschwungrad für optimale Kühlung Technische Daten: - Druck 10 bar - Ansaugleistung 660 l/min - eff. Liefermenge 520 l/min - Antriebsleistung 4,0 kW - Drehzahl 1025 Upm. - Behältervolumen 270 l - Geräusch 78 db(A) - Abmessungen L=750, B=705, H=1800 mm - Gewicht 170 kg
new
VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg G & BAR-BV-1 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78
new
UniMaster STS, the space-saving solution with a standing container! Standard with all fittings, such as an electromagnetic valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensation tap and shut-off valve V-cylinder driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures a high efficiency. Intermediate and aftercoolers ensure a rapid cooling of the generated compressed air Large fan flywheel for optimal cooling With refrigeration dryer and bypass line With complete module Öwadry, consisting of: refrigeration dryer, pre-filter and oil-water separator (only for DKS version) Safety tub optionally available Technical data: - Pressure 10 bar - intake capacity 660 l/min - eff. Delivery quantity 520 l/min - drive power 4.0 kW - speed 1025 rpm. - Container vol ...
new
-Die BBS 550 ist ideal zum Schneiden von weichem, hartem, trockenem oder gefrorenem Holz bzw. Holz-Prismen mit einer Länge entsprechend der Maschinenkonstruktion. -Die max. Schnittlänge ist abhängig von den Verlängerungselementen -Alle Holzarten können mit dem gleichen Sägeband geschnitten werden. -Robuste und schwingungsfreie Konstruktion -Minimaler Wartungsaufwand -Einfache Bedienung Massive Präzisionsgusslaufräder -Präzisionsführungen -Excenterspanner -Vorschneiderschwenkmechanik -Manuelle Schnitthöheneinstellung -Manueller Vorschub -Geliefert mit 4,6 m Rollbahn Technische Daten: - max. Stammdurchmesser: 550 mm - max. Brettbreite: 530 mm - max. Sägebandhub: 20 mm - max. Schnitttiefe: 220 mm - Schnittlänge Grundversion: 3,7 m - Verlängerungssektion: 2,3 m - max. Schnittlänge: unlimitiert - min. Schnnittlänge: 0,9 m - Motorleistung Antriebsrad S1 (100%) / S6: 4 kW / 5, ...
new
Technische Daten: - Doppelte Gehrungen 45C - Einfache Gehrungen, bis 90C - Arbeitsbreite, max. 100 mm - Arbeitshöhe, max. 160 mm - Querschnitt, max. 65/65 mm - Maßskala bis 1.500 mm - Nettogewicht 90 kg Beschreibung: Für Bilderleisten und Möbelleisten mit Falz Morsö F schneidet doppelte Gehrungen von 45C und einfache Gehrungen bis zu 90C. Im handwerklichen Gebrauch ist die Maschine auch zum Schneiden von Zapfen, Einschnitten, überdeckten Gehrungen etc. sehr geeignet. Die Morsö F arbeitet mit Messern \"im ziehenden Schnitt\" (nicht rotierend). Sie arbeitet, ohne Staub zu produzieren. Der Schnittabfall wird über eine Rutsche von der Maschine weggeleitet. Morsö F wird über ein Fußpedal bedient und benötigt weder Kompressor noch Elektrizität, d. h., mit der Morsö F kann fast überall gearbeitet werden. Morsö F garantiert einen spiegelg ...
used
System: 1-track rotary cup filler Performance: 1,500 - 1,800 cups per hour Cup diameter: up to 100 mm Dosing system: movable piston-valve filler Cleaning: Manual Filling volume: e.g. 100 500 ml (adjustable) Casing and frame: Stainless steel 1.4301 and MAKROLON Control: Siemens SP 7 with 4" touchpanel and colour display Power: 0,9 kW / 400V - 10A Air consumption (at 6 bar): approx. 340 l / min Weight (net): approx. 500 kg Dimensions (L x W x H): Basic dimensions: 820 x 820 x 1.600 mm including filler and evacuation: about 2,000 x 1,300 x 1.600 mm Machine stations basic version: - Cup magazine with automatic destacking - Piston valve filler for pasty products, e.g. Greek yoghurt, fruit yoghurt, cream, etc. Volume: e.g. 100-500 ml (others on request) -Board magazine and trailer -Hot sealing station -Cups lift and pull Options: -transfer dev ...
used
Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)
new
-mit Fußbedienung, -verschiebbarer Längseinstellung, -Maßskala, -Anschlägen links und rechts des Messerkopfes 45C-90C einstellbar, -verstellbaren Auflagen für Falzprofile -mit Kombinationsmesserkopf (Gehrung und Sprossen), -1 Satz Sprossenmesser (10 - 18 mm Nackenbreite), -Arretierungsschraube mit Klemmhebel und Anschlaglineal -Mit dieser Maschine erreicht man einen spiegelglatten sauberen Schnitt - doppelte Gehrung von 45C, einfache Gehrungen bis 90C. -Die Auslösung des Schneidevorgangs geschieht mittels Druck mit dem Fuß, wobei die Hände freibleiben. -Dank eines besonderen Hebel-Getriebes ist nur ein sehr leichter Druck erfolderlich. Die Messer sind aus feinstem, gehärtetem Stahl bester Qualität hergestellt. Technische Daten: - Doppelte Gehrungen 45C - Einfache Gehrungen, bis 90C - Arbeitsbreite, max. 100 mm - Arbeitshöhe, max. 160 mm - Querschnitt, m ...
new
Technische Daten: - max. Werkstückabmessungen 400 x 250 mm - min./max. Abstand vom Sägeband zum Transportband 4 - 125 mm - Breite Transportband 385 x 5480 mm - Rad Durchmesser 711 x 51 mm - min. Werkstücklänge 200 mm - Vorschubgeschwindigkeit stufenlos 5 - 25 m/min. (Standard:15 m/min., optional:25 m/min.) - Sägebandabmessung 4470 x 27 x 0,90 mm - Antriebsmotor 15,0 kW - Hydraulik Motor 2,2 kW - Motor Höhenverstellung 1,5 KW - Spannung 400 V / 50 Hz - Absaugstutzen 4 x 100 mm - Kühleinrichtung - pneumatische Abdrückrolle im Einlauf mit Stoßdämpfer - pneumatische Andruckrolle für präzises Sägen - die Kombination von dünnem Sägeband und präziser Sägebandführung ermöglicht die Herstellung extrem dünner Lamellenstärken - min. Lamellenstärken von 1,0 - 2,0 mm - glatter, verleimfähiger Sägeschnitt - Sägeband Schnittfuge von 1,2 - 1,6 mm (50% Materialeinsparung) - Sc ...
used
The fishing and packing plants have a simple and this stable and torsion-free construction. The machines are characterized by ease of use, flexibility, reliability and low maintenance requirements. The CAMBORIT clip has a capacity of up to 125 packs / min. 1 x 2 bottles can be packed with the CAMBORIT clip. To do this from flat so called "bars" cut to shaped, that get caught under the edge of the bottle. The machine can be operated automatically or manually. Display and operating elements are located on the control panel. All functions are controlled from the control panel and controlled. Errors of the cycle are displayed on the control panel. Action: At the beginning of production the magazine must first cut to be filled. The minimum level is cut to the magazine below, the machine will not turn on. After switching on the machine when existing minimum level of bottles with a capac ...
new
Technische Daten: - Verfahrbereich X - Achse 2500 mm - Verfahrbereich Y - Achse 1260 mm - Verfahrbereich Z - Achse 200 mm - Arbeitsbereich X - Achse 2440 mm - Arbeitsbereich Y - Achse 1220 mm - Arbeitsbereich Z - Achse 70 mm - Lade- Entladegeschindigkeit 15 m/min - Frässpindel luftgekühlt HSD / Italy 9.0 kw, ISO 30 (Option 11 kW HSK 63F) - Spindel Drehzahl stufenlos 24.000 rpm - Werkzeugwechsler,Karusell 8-fach, mitfahrend - Bohraggragat VERTIKAL 5 + 4 FAM / Italian 5 Spindeln in Y-Richtung, Bohrabstand 32 mm 5 Spindeln in X-Richtung, Bohrabstand 32 mm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren AC Servo Motoren YASKAWA - hochgenaue THK Linearführungen mit Langzeitschmiereinheit in X, Y, Z Achse - SHIMPO Getriebe Antrieb - max. Verfahrgeschwindigkeit 80 m/min - max. Arbeitsgeschwindigkeit 25 m/min - Arbeitsgenaui ...
used
Block/SOS bag machine with flat inside handle device, Carrier bag machine, 53bb + 43ct Bag width: 14-32cm Bottom width: 6-20cm Tube length 35-70cm with fotocell for preprinted paper, 1 ply option: 2 plies option: 4 or 5 colour tail end printer
used
MSE 470/10 Product no.: RE-HU-2014-0412-1 Attachment: Chamber filter press, drip sealing used Usage area: Chamber filter press Design: page Holm led Year of construction: 2002 Filter plate format: 470 x 470 mm Number of plates: 10 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.3 m ² Presses contents: approx. 48 dm3 Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available. There are two identical facilities are available.
new
Edge grinding with oscillation and veneer sanding WEIBERT new WJ-KS30 400V 3 KW (4 HP) n = 2840 RPM Work table 960 x 350 mm Table height 230 mm Belt rear 1050 x 200 mm Belt speed 20 m / sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 PS) A/can be switched off Machine table and guides made of grey cast iron Quick adjustment of tilting 90 °-45 ° with degree display Weight 400 kg Dust nozzle 120 mm Rollers pull-out extension table Band width 150 mm WJ-R00200 option: Band width 200 mm WJ R00300
used
I ´ checker advanced type DC70A Technical data: Supply voltage: 18... 26, 4 VDC Power consumption: max 37 Operating temperature: - 20-85 ° C Measuring range: 70A(DC) Accuracy: < 2% typical < 3% Max Protection class: IP20 Mounting: DIN rail -Suitable for DC and AC -RS 485 bus connection via RJ45 -Hutschienenmontange LED indicator -Optical failure Price per piece 50.00 29 STK. in stock
new
Technische Daten: - Arbeitslänge 3000 mm - Arbeitsbreite 1250 mm - Material Dicke 25 - 90 mm - Anzahl der Etagen 12 - Anzahl der Einspanneinheiten pro Fach 8 - Luftanschluss 8 bar, 1/2 \" - Motorleistung Drehvorrichtung 0,55 kW - Druck pro Einspanneinheit 1 - 12 kN - Max. Belastung pro Fach 150 kg - Pneumatik Camozzi - Elektrik Telemecanique - Getriebemotor Watt - Einspanneinheiten sind gezinkt - Schutzgitter - Hydraulik Aggregat - Pumpendurchfluss: 6,3 l - Leistung Hydromotor 3,0 kW - Hydrauliktank 50 l - max. Druck Hydraulikmotor 110 bar -Transport dimensions: 3800 x 2400 x 2200 mm ,1400 kg 4400 x 1600 x 2000 mm , 950 kg 1600 x 1600 x 800 mm , 900 kg 1600 x 1600 x 800 mm , 900 kg - Aufstellmasse L x B x H 4400 x 4600 x 3700 mm - Gewicht 4300 kg Option: Andruckelemente für dünnene Platten (15-25 mm) EUR 44,-/Stk Ausrichten mit 4 Pneumatischezylindern EUR 600,- Beschreibun ...
used
Product group Diesel forklift Brand Hyster H580 Year of build 1991 Additional options - Place Mülheim an der Ruhr Country Germany Price indication Select currency Price excluding VAT 35,000 VAT (19%) 6,650 Price with VAT 41.650 Details Hours of operation 5157 hours Max load capacity 28,000 kg Schwerpunt - distance 1,200 mm Lifting height 6,000 mm Fork drive Sideshift Fork length 2,440 mm Cabin Cabin Type of tyre Compressed air Motor Diesel Transport weight 48,000 kg Transport dimensions (L x W x H) 6.80 x 3.38 x 3.67 m
new
Technische Daten: - Arbeitslänge 3000 mm - Arbeitsbreite 1250 mm - Material Dicke 25 - 90 mm - Anzahl der Etagen 16 - Anzahl der Einspanneinheiten pro Fach 8 - Luftanschluss 8 bar, 1/2 \" - Motorleistung Drehvorrichtung 0,55 kW - Druck pro Einspanneinheit 1 - 12 kN - Max. Belastung pro Fach 150 kg - Pneumatik Camozzi - Elektrik Telemecanique - Getriebemotor Watt - Einspanneinheiten sind gezinkt - Schutzgitter - Hydraulik Aggregat - Pumpendurchfluss: 6,3 l - Leistung Hydromotor 3,0 kW - Hydrauliktank 50 l - max. Druck Hydraulikmotor 110 bar -Transport dimensions: 3800 x 2400 x 2200 mm ,1400 kg 4400 x 1600 x 2000 mm , 950 kg 1600 x 1600 x 800 mm , 900 kg 1600 x 1600 x 800 mm , 900 kg - Aufstellmasse L x B x H 4400 x 5000 x 3700 mm - Gewicht 4500 kg Option: Andruckelemente für dünnene Platten (15-25 mm) EUR 44,-/Stk Ausrichten mit 4 Pneumatischezylindern EUR 600,- Beschreibung: D ...
new
Attention: Don't buy a used universal tester / tractor-proof ingenuators: they need (all?) new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – a dead end that costs a lot of money later! A used machine, pick-up, test software update (?), commissioning, modernization is more expensive than a new machine from GALDABINI Quasar 200 kN latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 for tests on plastics, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Quality Components + Assemblies ergonomic design, ...
used
! Needed! FP 4NC SK40 / dialog 4 contouring Control: CNC dialogue 4 - 3D contouring speed: 25-3150 RPM Feed: 1-3600 mm / min stepless Rapid traverse rate: 4 m / min Drive performance: 2,0 / 4,0 kW 1430 / 2830 RPM Travel: X/Y/Z 560/450/450 mm Angle table: Solid angle table 530 x 900 mm of maximum capacity 450 kg Version: Vertical & horizontal spindle; Vertical Quill 80 mm extendable Splash Guard cabin; Milling head manually swiveling options: machine light / E Handwheel / NC rotary table / dividing head, etc.
used
Properties < b >: < / b > Roll length: 430 mm Axle length: 470 mm Roll diameter: 50 mm Shaft diameter: 8 mm Material: Steel, galvanised 6-kant: approx. 11 x 11 mm Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to. Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects. Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer y ...
used
Rebuilt lathe. Distance between centers: 750mm. Swing over bed: 500mm. Swing over carriage: 220mm. Spindle nose: 40,5mm. Motor power: 10cv. Equipped with universal chuck of 250mm. CE Protections in chuck and carriage and CE european certificate for second hand machines. Optional: Steady rest. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.
used
Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...
new
Technische Daten: - Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 2500 mm - Arbeitsbereich Z - Achse 300 mm - Frässpindel wassergekühlt je 4,5 kW, ER 25 mit Kühlaggregat CHILLER CW 3000 - Spindel Drehzahl stufenlos 22.000 rpm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren Step Motoren - max. Verfahrgeschwindigkeit 22 m/min - max. Arbeitsgeschwindigkeit 15 m/min - Arbeitsgenauigkeit 0.05 mm - Vakuum - Rastertisch mit 4 Sektionen und T-Nuten - Vakuumpumpe 5,5 kW trockenlaufend, luftgekühlt - Werkzeuglängen Sensor - Steuerung DSP Typ NK 105 (OPTION MACH3) - Schnittstelle USB - CAD/CAM Software Vectric Cut2D PRO (NESTING Inclusive) - Elektroanschluss 3 Phasen 400 V, 50 Hz - Betriebsumgebungstemperatur 0-45CC - Abmessungen Breite 2100 mm - Abmessungen Länge 3300 mm - Gewicht 1500 kg
used
Rebuilt lathe. Distance between centers: 1000mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm. Optional: Steady rest. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.
used
Attachment: Chamber filter press, laboratory press Usage area: Chamber filter press, pilot plant Design: page Holm led Type: XMS150-15 U Filter plate format: 150 x 150 mm Number of plates: 4 + 1/2 head and end plate Filter plates: PP Thickness: 15 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 0.2 m ² Presses contents: approx. dm3 PCB package length: mm Filter pressure: 15 PSI Plate transport: manually Pump technology: included - optional Type: centrifugal pump Type: CHL2-20 Buying or renting: Visit the facilities in consultation with us to work. Condition: demonstration plant, near Mint Photo: a construction-like setting Weight: approx. 70 kg length 70 cm: Width: approx 40 cm Height: With stand + pump approx. 85cm