opt used for sale

Table dimensions: 3200x6000mm, weight: 6.5t, available in February 2023.

Dimter Opticut 302 Optimizer Cutting out errors and fixed lengths The machine after a comprehensive overhaul in 2019 Year of Build 2000

Key data: 520

Sensational DIMTER optimizer OPTICUT 200 ELIT Machine from the production line, Complete machine, to it we will give a set of inlet tables, as well as a complete outlet. Measuring station, everything included Machine not running. Connect electronically and pneumatically, run the program At the customer's request, we can arrange it for a fee. Machine after mechanical overhaul in our plant If you have any questions, feel free

Goebel OPTIFORMA 520 Year 1985 Size: Width 520mm Unwind 5 printing units wet offset 4 bays in 25 inches Filing Hole Cross Perforation Cylinder Display: roll/roll roll/fold Machine is in production

Optical 3D coordinate measuring machine consisting of control unit VL-350, measuring head VL-370 and base VL-360. The meter was rarely used and is in very good condition., software: Version 1.3.0.235

THERMOFORMER, ULMA, TYPE: TF-OPTIMA Technical description: Format: (x4) 114 x 159 mm Power supply: 380-440 V/50-60 Hz Power : 30 kW Dimensions: 6600 x 1100 x 2050 mm

Meat grinder Mado Optimo 2, type MEW 624, 114 stuffing grinder, Machine in stainless steel, 2 speeds, Removable screw housing, with reverse operation, Connection 400V, 6kW, year of construction 2008, Dimensions LxWxH approx. 107x72x115cm, weight approx. 247kg, good used condition, fully functional

turning diameter: 380 mm turning length: 700 mm control: SIEMENS spindle turning speed - stepless: 2500 U/min tailstock quill taper MT: 4 weight: 1.5 t dimensions of the machine ca.: 2000x1400x1820 mmxmmxmm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 2000 mm z-travel: 1400 mm spindle stroke: 1000 mm turning speeds: 5-800 U/min Radial face slide: 700 mm Radial face slide: 2,2-115 U/min spindle taper ISO: 50 table surface area: 2000x1800 mm Table load: 14000 kg total power requirement: 42 kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x4,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BMG Polarstar Optima and Fluostar Optima Multimode Microplate Reader Up to 384 wells Fliter wheel 8 Excitation Filter wheel 8 emission Fluorescence intesity -time resolved fluorescence -Absorbance and luminicence POLASRSTAR Fluorescense polarization mode linear and orbital shaking Fluorescence 240-740 nm Absorbance 240-740 nm Fluorescence polarization 380-740 nm Additional 12 more filters

Fully automatic machine, Fabr. Eberhard Optimat 3

PROD. MATTEI TYP OPTIMA 30 S/N 3H0BEU-2010 YEAR 2010 POWER (kW) 30 EFFICIENCY. (m3/min) 5.34 PRESSURE (bar) 10

Bütfering Optimat SCO 113 - Diamond + LACK CONSTANT TABLE MACHINE / autom. Head delivery Stable frame construction with a constant workpiece inrun height of 900 mm by adjusting the upper part of the machine. Workpiece thickness settings from 3 - 160 mm 1. Aggregate comb. Steel contact roller and electronically controlled segment sanding pad unit CPS II system with variable grinding pressure 2. Aggregate Cleaning - Brush Unit Stable vacuum table for a large surface Large transport securing by means of suction clamping device - high-performance blower with control flap integrated in the machine. Table segmentation that can be activated via the terminal Extendable workpiece support Working width 1350 mm additional table in the outlet - foldable Feed speed infinitely variable 2.5 - 13 m/min. LACQUER SANDING PACKAGE: Vacuum table with lacquered carpet and vacuum generator 3 kW I ...

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2007, Control: PC 85, Software: Woodwop, Barcode: Ja, Online connection: möglich, Operating system: Windows, Work piece width min-max mm: 70-1000(1300), Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 8-80, Working range X: 2500, Working range Y-axis: 1000, Working range Z: 80, Beschickungsband: 32, Vertical drilling station from below: 32, Drill support from top: 2, Drilling heads overall: no, Tool changer: 2, Drill vertical Y: 32, Horizontal drills-X: 32, Drill horizontal Y: 8, Zwischentransport: 2, Lock case moulding aggregate: 2 , Number of spindles: 2x2,7, Year :2007

Manufacturer: Homag, Type: Optimat BAZ 311/40/K, Year: 2007, Software: PC85 CNC CORE Z, Feeding speed max m/min: X,Y-80, Z-30, Working range X: 4000, Working range Y-axis: 1220, Working range Z: 12-300, Year :2007

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998

Manufacturer: Brandt, Type: Optimat F 13, Work piece width min-max mm: 50, Edgeband thickness max mm: 0,5-3, Edgeband height max mm: 55, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 2 x 0,5, Work piece width min-max mm: 50,

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008

Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositionerhilfe, Radial arm machine: yes, Foot mats: yes, Available: ca. 03/2017, Year :2000

Hersteller : Costa, Type: Optima 2000 CNC, Year: 1993, Control: CNI, Positioning of CNC axis: yes, Double edge bander: yes, Hand-over: yes, Longitudinal edge banding: yes, Sanding machine: no, Tool exchange places: yes, Working width min-max mm: 320-4000, Arbeitshöhe min-max mm: 30-100, Saw Units: 1, Double edge bander - milling units/side total: 1, Spindle length of double edge bander mm: 620, Double edge bander with stoppers: yes, Longitudinal milling units total: 5, Längsprofiler Fräsaggregate linke Seite: 2, Längsprofiler Fräsaggregate rechte Seite: 2, Längsprofiler Fräsaggregate linke Seite: 2, Longitudinal milling units horizontally: 1, Spindle length - longitudinal milling mm: 320, Spindle diameter - longitudinal milling mm: 50, Feeding speed min-max m/min: 2,5-23, Vorschub stufenlos: yes, inkl Werkzeuge, Year :1993

Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001

Manufacturer: Weeke, Type: BP 140 Optimat, Year: 1997, Control: Woodworp, Working range X: 3600, Working range Y-axis: 1200, Working range Z: 150, C axis: yes, Number of milling spindles: 1, Milling engine 1 hours power: 7,5, rpm 1): 24000, Number of tool changers: 12, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Vacuum pumps m³/h: 160, Tool clamping system: HSK 63, Saw unit: yes, CE-Sign: yes, Year :1997

Key data: 3000 mm, 1800 mm, 1600 mm

Inv. Num. : 7037 Type: OPTIMA Producer: TOS Created: 2005 Parameters: Duty cycle: 83171 h Hours: 36486 h Work table length: 2500 mm Work table width: 1800 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Z-axis travel: 1600 mm

Working direction: left-rightNumber of self-adhesive stations: 2with capsule applicatorLocation: Geisenheim More then 300 machines new and second hand on our seema .de

Materials: LDPE, LLDPE, Metallocene,MDPE // Film Width (Max): 2200 mm

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1  ...

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 123.585 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 4 years Condition workshop-tested, very good, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1 p ...

Key data: 3250 mm, 1250 mm, 125 mm

4-axis machine with console table, 6 supports can be moved manually in X, 2 vacuum cups per console, Vacuum pump 100m³/h Vacuum connection for stencils LED display for suction cup position indication Working range X: 200 – 3250 mm Working range Y: 70 – 1250 mm Working range Z: 12 – 125 mm (passage 150mm) 19 vertical drilling spindles 6 horizontal drilling spindles, 4 of which are in the X direction and 2 in the Y direction. Groove saw 90° swivel Milling spindle 12 kW up to 24000 rpm with C-axis 360° interpolation, liquid circulation cooling – WZW 14-speed rear and 14-speed side right pick-up space Adapter units: -Lock box 2 spindles with blow-off nozzle -Flex 5 sawing, drilling, milling unit -4-spindle crosshead Tool change aid front right Control POWERCONTROL PC 85T with TFT 17" WoodWop 5.0 incl. MDE and production list software Operator terminal

Alignment tester, shaft aligner, laser shaft aligner -Manufacturer: db Prüftechnik, alignment tester Optalign 1.5 -Accessories: see photos -Dimensions transport box: 420/290/H555 mm -Weight: 20 kg

Control card, control, plc control, optical card, optical control card, optical interface -Manufacturer: Dr. Schenk industrial metrology, optical control card -Type: XVP2, Optical 4160631 -Dimension box: 280/200 / H50 mm -Weight: 0.8 kg

Tool setting device, tool presetting device, milling cutter setting device -Presetting device for: milling tools -maximum hob diameter: 500 mm -maximum height of the milling cutter: 500 mm -Dimensions: 800/400/H1600 mm -Weight: 242 kg

Automatic saw for cutting wood and cutting out defects with mechanization for unstacking and pneumatic sliders for subsequent length sorting. Consisting of: 1. Stacking cross conveyor with tipping destacking/separation 2. Cross conveyor with position slider / marking station 3. Dimter Opticut S90 saw 4. Stacked slat separators 5. 10 m discharge conveyor with pneumatic ejectors and sorting station, Full optimization: Yes, Max. wood input length: 6.3 m, cutting height: Max. 120 mm, cutting width: Max. 230 mm, Saw blade diameter: 500 mm, Feed slider: max. 60 m/min, Return stroke slider: max. 180 m/min, saw motor: 7,5 kW, Input stack max.: 6,100 x 1,200 x 1,200 mm // 5 t

spindle diameter: 120 mm x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm turning speeds: 19-1900 U/min table-size: 600x1200 mm table load: 2000 kg spindle taper ISO: 50 : Feed: 0,042-1,46 mm/U weight of the machine ca.: . t dimensions of the machine ca.: . m Tool holder: Steep taper No. 50 Din 2080 3.5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Top-equipped automatic trimmer in very good condition, with loading on both sides! 3 Movable flanges and new controls! 2 x board separator The fed boards are separated with 2 S-shaped chain cross conveyors. Hydraulically actuated ejectors eject when the Take the leading board back. A fast-running cross conveyor takes over the board after separation and feeds it to the assessment and manipulation station. Double-sided feeding, control NEW! (OPTILINE) The BKO trimming circular saw has two overhead width-adjustable saw shafts, each with a blade flange. on the saw shafts (BKO 3). With one separating flange per side and adjustment via telescopic shafts. The width adjustment is servo-hydraulic.

Key data: 8 mm, 50 mm, 5860 mm

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 550 C, built in 2006: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge banding EVA Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 2 motor manually adjustable Radius scraper R2 pneumatically shut-off Scraper blade surface Polishing brushes Control panel Power Control PC20+ Working height adjustable by servo motor Material height 8 - 50mm Edge material thickness 0.4 - 8.0mm Feed speed 11m/min. Assembly length including feed plate 5860mm Total weight 2660kg Very good condition, fully functional!

Complete sawmill plant (capacity approx. 80 000 m²) consists of: Round timber feeder 5 strands with separation Debarking Nicholson A2 approx. 90cm Reducer TC Remote-controlled EWD clamping carriage with cab, Swing frame gate EWD GDZ-GE 600, Splitting wedge, Conveyor systems with L/R discharge, Cross conveyor for resawing saw EWD FR 12, EWD Twin Shaft Recut Circular Saw FR12 Heavy sawmill machine with fixed hook-up. Both saw shafts are hydraulically height-adjustable. Technical data FR12 Cutting height max. 300 mm Clamping length max. 500 mm Passage width max. 900 mm Feed rate max. 50 m/min Weight approx. 15 tons Cross conveyor to sergeant, EWD OPTIMES BKO TL2 (3 movable flanges, new OPTIDRIVE BKO control) Price separator, Assortment of boards, Hacker RUDNICK&ENNERS RE-TH 250/700 75 kW with disposal

Key data: 600 mm, 375 mm

1 Gebr. ELB Precision Surface Grinding Machine, Partially Overhauled Model : Optimal 6375 ND Sanding area : 600 X 375 X 375 mm Grinding wheel : 300 X 50 X 76.2 mm Year of construction : 1990 ACCESSORIES Electric magnetic clamping plate 600 X 350 mm (brand new) Digital display Y (vertical) and Z (horizontal) Hand-held lever dresser Wet grinding device with belt filter with new conveyor chain Grinding wheel holder with grinding wheel Legs Partially repainted and the functions checked. Control panel overhauled. New grinding spindle motor The machine was maintained by us and extensively repaired about 2 years ago.

Mazak OPTIPLEX 3015 NEO 10kW Beam Shape Laser Cutting Machine + Automation Loading and Unloading System with 8 Regall Bearing Locations CST3015 Publisher: Mazak Type: OPTIPLEX 3015 NEO 10kW Beam Shape Year of construction: 11/2022 Commissioning: 05/2013 Condition: New, Exhibition Machine Availability: Immediately, by arrangement Operating hours (as of 01.2024): – CNC Power On Time approx. 636h – Laser Power On Time approx. 287h – Auto Operation Time approx. 60h – Auto Cutting Time approx. 19h – Cutting time approx. 17h Scope of delivery complete incl. installation and commissioning (Mazak Germany): – Basic machine with laser resonator Beam Shape CFX-10000 (10kW) – Built-in nozzle camera – Conveyor belt for material scrap – Zus. Laser protection screen (side 1) – Zus. Laser protection screen (side 2) – Oil mist mist – Roller lift table (ma ...

Specifications: Workpiece length: min 200 mm Workpiece length: max 3050 mm Workpiece width: min 70 mm Workpiece width: max 850 mm Workpiece thickness: min 12 mm (for flat machining) min. 12 mm (for horizontal machining on the two transverse edges and on the upper edge), Note: When drilling horizontally from the lower edge, central drilling is only permitted up to a workpiece thickness of 19 mm. max. 60 mm Workpiece weight: max. 30 kg Speed of axes: Vector speed X/Y = 50 m/min Z = 15 m/min Features: Workpiece Document Area Mechanical support by means of a roller conveyor for workpieces. Workpiece removal area Mechanical support by means of a roller conveyor for workpieces. Drill gear V13 Feed stroke Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: right/left Speed: 2,800 rpm Propulsion: 1.8 kW Drill bit holder: d = 10 mm for Quick-chan ...

General SKU354T1034 LocationBarneveld MakeKtron TypeS-400 No.240-739 Main Features MaterialStainless steel Motor1.1 KW Inlet diameter370 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Metering screws Metering screwcheck Screw diameter42mm Pitch31mm Screw length700 With hoppercheck Hopper sizes370x370x370 Inlet370x370mm Outlet44mm With motorcheck With DC motorcheck 0,55kW, 180Volt, 1800rpm With breaking/mixing shaftcheck Motorcheck 0,37kW, 220/380Volt, 1390rpm Information Year of constructionunknown Mounted on framecheck With switchgearcheck(as is) Floorspace1,15x0,65m Total height1,8m Weight200kg Extra Specificationsktron features additional transport/mixing screw. screw Dia: 77mm screw Dia: 50mm screw Length: 480mm screw Shaft Dia: 22mm product Exhaust: 80x80mm motor data: 1.1kW, 220/380Volt, 28 ...

General SKU225K100 LocationBarneveld MakeLenzing Technik GmbH TypeOptifil 150-0270-0C No.1517 Year of construction2012, Motor 0,75 KW, 230/400 Volt (Atex) Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4571 (316Ti) FilterAutomatic backwash filter (1x) Information Floor space1,2x0,9 M Total height1,3 M Extra SpecificationsCapacity 31 Ltr, Working pressure 10 bar (test pressure 15,8 bar) Max. Temperature 150 Degr. C., Rotor speed ± 52 Rpm Miscellaneous filtersLenzing TechnikFilters > Miscellaneous filtersBrand > Lenzing Technik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

description TECHNICAL DETAILS Support table: 3250 x 1250 mm X-travel: 3860 mm Y-travel: 1822 mm Z1/Z2 travel: 325 / 185 mm Workpiece thickness: max. 125 mm X / Y / Z speed: 100 / 50 / 20 m/min X-travel distance suction nozzle: 4210 mm Tool holder: HSK F63 Number of tools: 14 (disc) Vertical drilling spindle: 19 pieces Horizontal drilling spindle: 6 pieces Milling unit: 2 x HSK F63 collet chuck Drill holder: 10 mm Drill spindle holder: 20 - 35 mm MACHINE DETAILS Loading dimensions: 5800 x 2300 x 2300 mm Installation dimensions: 5830 x 4100 x 2300 Weight: 4.3 tonnes Surface pressure: 1.20 N/sqmm Concrete thickness: min. 200 mm Operating voltage: 3 x 400 V Voltage: 50/60 Hz Rated current: approx. 32 A Total connected load: 17.5 kW Pneumatics: according to ISO 8573-1 Connection: R 1/2 Pressure: 7 bar Consumption: 100 - 200 NL/min Matching s ...

Machine is in excellent condition https://www.beckman/centrifuges/ultracentrifuges/optima-max-xp Platform Tabletop UCF Maximum Speed 150,000 rpm Maximum g-Force 1019000 x g BioSafe No Acceleration 10 acceleration profiles Deceleration 11 deceleration profiles Speed Control ± 50 rpm of set speed Max Capacity Volume Range 0 - 194.4 mL Refrigeration System Solid state (thermoelectric temperature control system with forced air; no coolant; no CFCs/ODCs) Temperature Control 2.00 °C of set temperature Drive Type Cooling Variable Frequency Induction Drive with rotor overspeed ID Temperature Range(s) Set temperature range: 0 to 40°C in 1°C increments Zonal Capability No Vacuum and Pump Moisture-purging vacuum system Display Full-color LCD touch screen Weight 105 kg(231.5 lb) Width 73.9 cm(29.1 in) Depth 61.7 cm(24.3 in) Height 39.4 cm(15.5 in) Clearances 7.6 cm: side  ...

Weinig Dimter Opticut 200 Classic optimizer - after the technical review - year of production 2004 - declaration of conformity, DTR - German production TECHNICAL PARAMETERS: min./max. entry length of the element 800/3500 mm min./max. entry width of the element 80/200 mm min./max. element input thickness 12/80 mm type of wood hard / soft dash cutting wood classification max. feed speed 120 m / min acceleration 5 m / s saw blade diameter fi 500 mm saw hole diameter 30 mm saw spindle speed 4600 U / min duration of 1 cycle 0.7 - 1.2 sec a powered conveyor at the entrance and a marking station with side tables for two markers conveyor belt total power 15 kW length measurement - fluorescence camera for 3 qualities receiving station - conveyor belt full optimization total length 8300 mm stub diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

Weinig GreCon Dimter OptiCut 101 R optimizer - German production - full optimization - year of production 1998 max. length of the cut material 3000 mm max. width 360 mm max. height 100 mm automatic length measurement blade diameter 500 mm main engine power 6.25 kW Graf-Syteco control optimization for length and value pneumatic side and top pressure 1600 mm receiving table total length 7000 mm transport dimensions (length / width / height) 560/240/200 cm weight 1800 kg

CNC vertical machining center DRILLTEC Type: V-200 Optimat BHX055 Year of construction: 2021 only 564 operating hours Workpiece length 200 - 3050 mm incl. roller conveyor Workpiece width 70 – 850 mm Workpiece thickness 12 – 60 mm Workpiece weight max. 35 kg Speed of axes X/Y 50 m/min., Z 15 m/min. Vertical Drill Gear V13/32 mm High Speed 2 rows of drill bits, each with 5 drill bits in parallel in X-direction 1 row of drill bits with 5 drill bits in Y-direction Total drill length 70 mm Drill diameter max. 35 mm Spindle spacing 32 mm Horizontal drill gear with 4 spindles (2 right, 2 left) in X-direction, can be called up individually, drill spacing 32 mm Horizontal drill gear with 2 spindle (1 right, 1 left) in Y-direction, can be called up individually Groove saw in X-direction, diameter 100 mm Tool change spindle HSK 63 and converter 10 kW Tool diamet ...

Clamping surface of the table: 2500x1800 mm Longitudinal movement of the table - x-axis: 3000 mm Transverse table movement - y axis: 1800 mm Vertical movement of the table - z axis: 1600 mm Spindle speed: 6000 rpm Chip conveyor:: Yes Internal cooling: : Yes Number of spindles:: 1

Inv. Num. : 5274 Type: OPTIMAT A 42 Producer: MAS Created: 2005 Parameters: Max. rod diameter: 42 mm Maximum bar length: 3000 mm Maximum spindle speed: 3520 1/min Number of tools: 6 pieces Total power requirement: 10 kW Weight: 2500 kg Equipment: Technical Documentation Collets Tool Holder Shovel Piece counter 4 cross slides Device for longitudinal turning on the first carrier of the machine driven by its own curved disc Equipment for guiding material bars IVT 50

Key data: 3000 mm, 1800 mm, 1600 mm

Inv. Num. : 6982 Type: OPTIMA Producer: TOS Created: 2005 Parameters: Work table length: 2500 mm Work table width: 1800 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Z-axis travel: 1600 mm

Capacity up to 6 tons For more details contact with us