opt used for sale

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -Manufacturer: Optibelt, V-belt pulley, pulley 4 grooves SPB224-4 3020 -V-belt width: 17 mm -Receptacle: Ø 107/100 mm for taper bushing 3020 Quantity: 1x pulley available -Dimensions: Ø 230 x 80 mm -Weight: 12.2 kg

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Air cutter, Pneumatic wire cutting shears from face mask machine -Type: AM-10 -Cutting blades: 100S / Cutting length approx. 46 mm, see photo -Quantity: 2 pairs of scissors available -Price: per piece -Overall dimensions: 210/35/H45 mm -Weight: 0.3 kg/pc.

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Air cutter, Pneumatic wire cutting shears, unused, original packaging -Type: OPT AM-10/100S -Cutting length: approx. 46 mm, see photo -Quantity: 9 pairs of scissors available -Price: per piece -Cardboard dimensions: 235/70/H60 mm -Weight: 0.4 kg/pc.

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Replacement blades for pneumatic shears, unused, original packaging -Type: 100S -Cutting length: see photo -Quantity: 4x replacement blades available -Price: per piece -Cardboard dimensions: 160/50/H30 mm -Weight: 0.1 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibel, timing belt pulley Ø 228 mm -Type: TB 90 8M 30 -Material: Cast iron -Number of teeth: 90 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-30 Ø 30 x 45 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 228 x 45 mm -Weight: 7.1 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibel, timing belt pulley Ø 228 mm -Type: TB 40 8M 50 -Material: Steel -Number of teeth: 40 teeth / Belt width: 50 mm -Mount: Taper clamping bushing: optibelt 2012-32 Ø 32 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 106 x 60 mm -Weight: 1.9 kg/pc.

Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2007, Control: PC 85, Software: Woodwop, Barcode: Ja, Online connection: möglich, Operating system: Windows, Work piece width min-max mm: 70-1000(1300), Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 8-80, Working range X: 2500, Working range Y-axis: 1000, Working range Z: 80, Beschickungsband: 32, Vertical drilling station from below: 32, Drill support from top: 2, Drilling heads overall: no, Tool changer: 2, Drill vertical Y: 32, Horizontal drills-X: 32, Drill horizontal Y: 8, Zwischentransport: 2, Lock case moulding aggregate: 2 , Number of spindles: 2x2,7, Year :2007

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008

Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositionerhilfe, Radial arm machine: yes, Foot mats: yes, Available: ca. 03/2017, Year :2000

Hersteller : Costa, Type: Optima 2000 CNC, Year: 1993, Control: CNI, Positioning of CNC axis: yes, Double edge bander: yes, Hand-over: yes, Longitudinal edge banding: yes, Sanding machine: no, Tool exchange places: yes, Working width min-max mm: 320-4000, Arbeitshöhe min-max mm: 30-100, Saw Units: 1, Double edge bander - milling units/side total: 1, Spindle length of double edge bander mm: 620, Double edge bander with stoppers: yes, Longitudinal milling units total: 5, Längsprofiler Fräsaggregate linke Seite: 2, Längsprofiler Fräsaggregate rechte Seite: 2, Längsprofiler Fräsaggregate linke Seite: 2, Longitudinal milling units horizontally: 1, Spindle length - longitudinal milling mm: 320, Spindle diameter - longitudinal milling mm: 50, Feeding speed min-max m/min: 2,5-23, Vorschub stufenlos: yes, inkl Werkzeuge, Year :1993

A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible.

capacity 90 degrees: round: 115 mm capacity 90 degrees: flat: 100 x 150 mm band saw dimensions: 1638 x 13 x 0,65 mm : 20/29/50 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Optimum Model: OPTImill F 105 CNC Sinumerik 808D ADVANCE Type of Machine : Milling Machine Condition : New Included Accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 Liters Cutting and Drilling Emulsion AQUACUT C1 - 4th Axis Preparation Find more here - / Contact us at -

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibeltl, timing belt pulley Ø 228 mm -Type: TB 28-8M-30 -Material: Steel -Number of teeth: 28 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 1210-32 Ø 32 x 25 mm -Quantity: 8x timing belt pulleys available - Price: per piece -Dimensions: Ø 75 x 38 mm -Weight: 0.6 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibeltl, timing belt pulley Ø 228 mm -Type: TB 56 8M 30 -Material: Steel -Number of teeth: 56 teeth / Belt width: 30 mm -Receiver: Taper clamping bushing: TECNAMIC 2012-40 Ø 40 x 35 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 150 x 38 mm -Weight: 3.6 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibelt, timing belt pulley Ø 228 mm -Type: TB 90 8M 30 -Material: Cast iron -Number of teeth: 90 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-40 Ø 40 x 45 mm -Quantity: 6x timing belt pulleys available -Price: per piece -Dimensions: Ø 228 x 45 mm -Weight: 7.0 kg/pc.

IBERICA OPTIMA 105, Year 2012, Max. Speed: 9,000 Sh/h, Max. Size: 760x1050 mm, Min. Size: 350x400 mm, 10900 running hours, Max. cutting force: 300 T, Min. Paper: 90 g/m², Max. paper thickness: 1.5 mm, QuickLock system, Centerline, Non-stop, in production

LaserCleave for Simplex Connectors Used, bought as seen Viewing by telef. Arrangement possible

Excellent condition - Fully operational - Loading / Transport possible! VENTURE 08M CNC - controlled machining center in moving gantry design travels of the axes: X = 3930 mm Y = 1953 mm Z = 300 mm working table: X = 3100 mm (length) Y = 1250 mm (width) Z = 100 mm (thickness) 50 mm (passage height without vacuum cups) CONFIGURATION: V12, H4X/2Y, N1 X-Y 90°, F1-HSK63-9KW, C-AXIS, W8 REAR, W8 SIDE V12 HIGH SPEED 7500 incl. quick change system and spindle clamping Vertical drilling unit (individually controllable with variable speed range). Spindle clamping for safe achievement of drilling depth. F1-HSK63-9 KW Automatic tool change spindle in combination with lateral tool change magazine. Tool holder: HSK63 Tool retraction: automatic Direction of rotation: right/left Speed: 1,250 - 24,000 1/min infinitely programmable C-AXIS AGGREGATE INTERFACE W8 REAR Automatic tool change  ...

Excellent condition - Fully operational - Loading / Transport possible! working width: 1350 mm Workpiece thickness: 3 - 160 mm Sanding belt width: 1370 mm Sanding belt length: 2150 mm Drive motors: Unit 1: 15 kW Unit 2: 7.5 kW Total connected load: approx. 28 kW

Machining center in vertical design with automatic return Workpiece dimensions: Length: 200 to 3050 mm Width: 50 to 1250 mm Thickness: 8 to 80 mm weight max 60 kg Performance - 2x vertical drilling unit separately controllable with variable speed. right left V10/32mm. 2.3 kW. Drill length 70 mm, D= max 35 mm - 2x horizontal drilling unit, 6 spindles in X direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - 2x horizontal drilling unit, 2 spindles in Y direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - Grooving saw unit X-Y can be swiveled 0?/90? saw diameter 125 mm, rpm 1500-7500 frequency controlled - Dowel insertion station for automatic insertion of dowels on the two transverse workpiece edges 1x left side / 1x right side glue pump, vibrating guide for dowels 8 x 35/40 mm - plau ...

Excellent condition - Fully operational - Loading / Transport possible! machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 Drilling spindles horizontal X: 16 Drilling spindles horizontal Y: 4 Hedp Ez Afsh E Sghjdsk Grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18,000 rpm

Excellent condition - Fully operational - Loading / Transport possible! Control POWER CONTROL PC 20 PLUS Infeed ruler with motorized single-axis-adjustment Top pressure beam with motorized height adjustment Edge magazine single Jointing cutter unit Cross-cut saw unit 2-motor Profile cutter unit top/bottom with multiple roller scanning Form cutter unit 1-motor Profile and flat scraper unit Buffing unit Edge thickness 0.4 - 8 mm Workpiece thickness 8 - 60 mm Feed 8 - 14 m/min joint trimming unit 2 x 2.2 KW snipping unit 2 x 0.18 KW rough trimming unit 2 x 0.55 KW

Excellent condition - Fully operational - Loading / Transport possible! cutting length: 4300 mm cutting depth: 4250 mm Saw Blade Protection: 80 mm clamps piece: 6 (75 / 275 / 475 / 1050 / 1850 / 3450) piece Main saw blade: 350 mm Scoring Saw Blade: 180 mm saw carriage speed forward: 1 - 150 m/min saw carriage speed reverse: 150 m/min program fence speed forward: 90 (EU max 25) m/min Program Fence Speed Reverse: 90 m/min Air table: 4 x (2240 x 770 mm) Main motor: 13.5 kW scoring saw: 2.2 kW control: PLC software: CADMATIC 4.1 PROFESSIONAL total power approx: 20 KW

Cutting capacity: 4300 mm x 4250 mm. Sawblade height: 95 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 5-130 m/min. Returnspeed 130 m/min. Programm fence speed: 80 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1050/1850/2650/3450 mm. Machine control: CADmatic 4 air tables of 2160 x 650

X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...

Process: horizontal drilling - injecting glue - driving dowels 1 drilling and doweling unit, freely programmable Workpiece dimensions: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/ max: 10 / 60 mm Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical pushers Double diaphragm pump 1:1 Dowels: 8 mm x 30 mm, 8 mm x 35 mm Control: Powercontrol PC85T with Woodwop software

Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine.

Press brake manufactured in 2005. This Ursviken Optiflex 130 3.1M features a pressing force of 1300 kN and a maximum length of 3100 mm. It includes tooling and has a weight of 14,500 kg. If you are looking to get high-quality bending capabilities, consider the Ursviken Optiflex 130 3.1M machine we have for sale. Contact us for further details.

Optima/alpha pack complete production and packaging line for ELISA test kits, comprising Optima ImmuCoat coating system for the manufacture of 96-well microtitre plates for ELISA tests, B&R machine control with touchscreen control panel. Operation and process steps: 1. Feeding and preparation: Microtiter plates are automatically removed from destackers and transferred to the transport system. 2. Deionisation: To eliminate static charges, the plates are deionised, which is crucial for uniform coating. 3. Coding: Each plate is assigned a unique serial number, which is recorded in the system control for quality control purposes. Keyence printer. 4. Coating: The system precisely dispenses the biological components (such as antibodies or proteins) into the wells of the 96-well plate. The system can coat up to 1.200 plates per hour. 5. Product selection: The system allows the use of up to 12 b ...

This 3-axis HOMAG WEEKE OPTIMAT ABD150 was manufactured in 2014. It is a used multi-spindle drilling machine designed for precision drilling and dowel inserting. If you are looking to get high-quality drilling capabilities, consider the HOMAG WEEKE OPTIMAT ABD150 machine we have for sale. Contact us for further details.

Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power.

Wood production line manufactured in 2017. This BURKLE Optima 1428/50 includes a continuous-action stack press with a pressing area of 1400 x 2800 mm and an automatic feeding system. It also features a robust panel rack and two tilting hoppers with a capacity of 1.5 m³. If you are looking to get high-quality door panel production capabilities, consider the BURKLE Optima 1428/50 machine we have for sale. Contact us for further details.

Offer 25462 Technical data: - Drilling capacity in ST 37 to 32 mm - Drill spindle holder with tightening thread M 12 / MK 3 - Drilling spindle speeds 120 to 1600 rpm - Drilling unit height-adjustable by hand crank - Larger distance table / boring spindle 650 mm - Drilling spindle stroke with fine feed by handwheel 130 mm - Drilling spindle projection 205 mm - Drill milling unit can be rotated 360° - Coordinate table with 3 T-slots 730 x 210 mm - Table travel X-axis 250 mm / Y-axis 200 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 1150 x H 1100 x D 1100 mm - Weight approx. 270 kg

Key data: 4000 mm

Power Control PC85, Woodwop, ATC 12-fold, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum assignment, edge height max. 65 mm, chip and offcut disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled

Motor power: 1.1kW / 230V; Cutting area: 100mm x 145mm; Feed: infinitely variable; Saw blade speed: 22 / 31 / 55 m/min; Saw blade dimension: 1638 x 13 x 0.65 mm; Cutting angle: -45Â to 60Â; Dimension: 1085mm x 498mm x 978mm; Weight: 78kg; Circuit breaker for the belt cover and the saw blade cover in low-voltage designSeparate emergency stop impact switchLow-voltage electronics 24 VGerlow-running Mobile machine substructureBall-bearing saw blade guideThree speed levels for a wide-ranging

Equipment Included - Wurster and Dietz OPTIMAT swing-stroke full gate saw, built circa 1970 - Splitting wedge - Cross conveyor - Roller conveyor - Sharpening machine - Setter - Wurster and Dietz Edge Saw FR 7, built circa 1965 Find more here - / Contact us at -

A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.

Measuring dimensions X/Y/Z: 400mm/300mm/200mm, measuring accuracy: 2.9+L/100µm, max. workpiece weight: approx. 30kg, machine dimensions X/Y/Z: approx. 1250mm/950mm/1700mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

Inv. Num. : 9123 Type: OPTIMAT HPL 11/43/22 Producer: HOLZMA Created: 2003 Parameters: Saw blade diameter: 450 mm Table dimensions: 4300 x 2200 mm Equipment: Loading platform

Belt width: 600 mm, Power: 3 x 400V, 50Hz, 5.3kW, Dimensions: 2750 x 1650 x 2300 mm, Weight: 1025 kg, Including: GEA OptiAir cycloneTypeOPASerial number515Year of construction2011Power3 x 400V, 50Hz, 4kWDimensions1350 x 950 x 1800 mmWeight450 kg

Belt width: 650 mm, Product height: max 50 mm, Filling: min 40 L, Infeed conveyor length: 600 mm, Outfeed conveyor length: 950 mm, Power: 3 x 400V, 50Hz, 1.8kW, Dimensions: 3850 x 1400 x 1350 mm, Weight: 850 kg

Belt width: 600 mm, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 1800 x 1350 x 1450 mm, Weight: 456 kg

DIMTER automatic optimizing cross cut saw, type OptiCut S50, Manufacture year 2022, Machine specifications:, - Push infeed, max. length 6300 mm, - Automatic length measuring and chalk reader, - Cutting width max. 250 mm, - Cutting height 120 mm, - Max. cross section 220 x 120 / 250 x 100 mm, - Motor 7.5 kW, - OptiCom Pro controller, - Automatic outfeed table with pusher

Find more here - / Contact us at -

grinding length: 600 mm grinding width: 375 mm workpiece height: 350-375 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.