opt used for sale

Max. Capacity: 99 litres, internal pan dimensions: 1020x540x210mm, connected load: 14.4kW, 3 NPE AC 400V, fuse protection: 3x 32A, sensible heat output: 6480W, latent: 5760W, length: 1600mm, width: 850mm, height: 700mm, weight: 245kg. With appliance switch, limit switch, temperature controller, safety temperature limiter, control lamps, SUPRA contact heating element, contactor, fixed electrical connection and IPX5. On-site inspection is possible.

bore capacity in steel (diameter): 30 mm throat: 270 mm bore stroke: 125 mm : 4 Motor output: 9 speeds: 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LED machine light integrated in the drill head V-belt cover with s ...

turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range  ...

x-travel: 580 mm y-travel: 200 mm z-travel: 340 mm speeds: 115 - 1750 U/min table surface area: 1000 x 240 mm tool taper: ISO 40 total power requirement: 4,5 kW weight of the machine ca.: 820 kg dimensions of the machine ca.: 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with mic ...

turning diameter: 380 mm turning length: 700 mm control: SIEMENS spindle turning speed - stepless: 2500 U/min tailstock quill taper MT: 4 weight: 1.5 t dimensions of the machine ca.: 2000x1400x1820 mmxmmxmm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 400 mm grinding width: 250 mm workpiece height: 375 mm grinding wheel diameter: 300 mm weight of the machine ca.: 2.9 t Magnetic plate 400x250mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully Automatic High-Performance Die Cutting Machine With Integrated Stripping And Blank Separation, Designed For Industrial Folding Carton And Packaging Production. The Machine Features A Non-Stop Feeder And Delivery System For Continuous Operation And Maximum Productivity, Max. Sheet Size: 1060 × 750 Mm, Min. Sheet Size: 400 × 350 Mm, Paper From 90 G/M², Carton Up To 2000 G/M², Corrugated Board Up To 4 Mm, Max. Die Cutting Pressure: 260 Tons, Mechanical Speed: Up To 6,500 Sheets/Hour (Designed For Up To 8,000 Sheets/Hour), Quick Lock Die Frame, Quick Lock Stripping And Separation System, Ultrasonic Double Sheet Detection, Anti-Static System, Precision Gripper Transport System, Pneumatic Die Locking, Motorized Pressure Adjustment, Heavy-Duty Drive System, High-Precision Registration Control, Complete Tooling Included, Quick Change Frames, Automatic Waste Removal, Non-Stop Delivery W ...

Type: OptiCoater 600 Serial number: E022210405068 Year of construction: 2020 Belt width: 600 mm Power: 3 x 400V, 50Hz, 3kW Dimensions: 1800 x 1350 x 1450 mm Weight: 456 kg

Key data: 2 kW, 4 kg, 14 kW

Holzma HP72 Optimat - Horizontal sizing saw Brand: Holzma Type: HPP82/43/43 Optimat M-No.: 0-240-0 Year of Make: 2001 Control with Cadmatic Holzma CAD Matic Optimization Junior Cadmatic – on line Total connected load: approx. 26 KW Cutting length 4,300 mm Cutting width/depth: 4,300 mm Main saw: 13.5 KW Saw blade protrusion mm: 95 mm Saw height: 82 mm Saw feed: 130 m/min Scoring saw motor: 2.2kW Angle Pressing Device: Sword Grooves: Nuttprogram Collets: 7 Program Trolley Feed: Step-Free Air cushion device 4 pcs. Table dimensions: 3 (1,760650) + 2,170650 mm Suction nozzle diameter: 250 mm Extraction volume: 5000 m³/ h

"The machine from 1992 is still in productive use and will be available from week 35." More details please on request!

1m wide OptiFlour II. Bought new in 2022 and only used for a few months. Almost as brand new condition. Matching OptiAir dust extractor available at extra cost.

OptiGrind GU18 Double Grinder 0.45kW 230V 50Hz Grinding wheel 175mm x25mm Speed 2850 rpm G&STÜ-3101510

Casing press manufactured in 2001. This LIGMATECH Optimat MDE 10 features adjustable pressing forces applied both vertically and horizontally, ensuring precise operation. The machine allows for casing dimensions ranging from 300 to 2500 mm in length and 300 to 1300 mm in height. If you are looking to get high-quality casing capabilities, consider the LIGMATECH Optimat MDE 10 machine we have for sale. Contact us for further details.

Tube filling and sealing machine for PE and laminate tubes, mechanical max. 60 tubes/min., built in 2000, D.35 and D.50 formats

valve dimensional inspection

: 0583 mm : 1710 mm : : 82 mm : 436 mm : 2500 U/min : A1-8 DIN 55026 : 100 mm : 235 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3050 mm table width: 1525 mm burner heads: 1 Control: Mazatrol PreviewG workpiece weight: 930 kg traversing speed: 120 m/min laser capacity in Watt: 6 kW cutting width: bis 25 mm x-travel: 3110 mm y-travel: 1595 mm z-travel: 110 mm weight: 15200 kg total power requirement: 41 kW dimensions of the machine ca.: mm NEW and UNUSED Machine Laser cutting machine with automatic shuttle table - Mazatrol PreviewG CNC control - 2 pallets - Multicontrol cutting head (Optiflex) - Donaldson DFPRE-4L SPKTRP (7,5kW) extraction system - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: WEEKE Model: OPTIMAT BHT 500 Year of Manufacture: 2009 Technical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phases: 3 + N (three-phase with neutral) - Power Consumption: 45 kW - Current Rating: 100 A - Control Voltage: 24 V Find more here - / Contact us at -

spindle diameter: 125 mm x-travel: 2000 mm y-travel: 1100 mm z-travel: SK 50 mm spindle taper: Philips 2500 digital readout: Pfillips turning speeds: 925 U/min spindle stroke: 800 mm Table: 1000x1400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ...

Type: OptiDipper 650 Serial number: 87 Year of construction: 2013 Belt width: 650 mm Product height: max 50 mm Filling: min 40 L Infeed conveyor length: 600 mm Outfeed conveyor length: 950 mm Power: 3 x 400V, 50Hz, 1.8kW Dimensions: 3850 x 1400 x 1350 mm Weight: 850 kg

Manufacturer: Göpel Electronic Model: OptiCon BasicLine Year of Manufacture: 2011 Type of Machine : AOI System Voltage: 230V / 50Hz Current: 10A CE Marked: Yes --------------------------------------------------------------- Find more here - / Contact us at -

Type: OptiFlour600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Product height: max 70 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2700 x 1700 x 2150 mm Weight: 1025 kg CFS OptiAir cyclone Type: OPA Serial number: 515 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1400 x 900 x 1800 mm Weight: 450 kg

thickness of jaw: 127 mm clamping width: 0 - 208 in 3 Stufen mm clamping capacity: 4000 kg total power requirement: manuell kW weight of the machine ca.: 52 kg dimensions of the machine ca.: 670 x 151 ( L x H ) mm Furnishing: - hydraulic machine vice - Robust structure for milling, drilling and grinding - Vice body made of high quality cast iron - Guide surfaces hardened and ground - Jaws hardened, ground and exchangeable - Protected spindle - Booster system, little effort required, high pressure when clamping - Wide clamping range thanks to locking bolts with different hole spacings - With turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter of brush: Ø 250 mm width of brush: 40.0 mm turning speed range: 2850 U/min voltage: 400 Volt total power requirement: 1.3 / 1.8 kW weight of the machine ca.: 36.0 kg dimensions of the machine ca.: 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 600 kg,

throat: 180 mm quill stroke: 80 mm continious capacity: 20 spindle taper: MK 2 table-size: 280 x 245 mm height of the machine: ca. 1000 m column diameter: 73 mm distance spindle /table: max. 425 mm dimensions: ca. 615 x 330 x 1015 mm weight: ca. 60 kg incl. vice HM Müller HT100P The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8663 Type: Opticontrol Producer: Weinig Generated: Parameters: Max. tool diameter: 300 mm Max. tool length: 330 mm

Band Saw Optimum S300 VG BJ 2000

Milling center with 8 tool changer. Functional areas are still being built. Comes from research facility and is relatively little used.

A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.

x-travel: 550 mm y-travel: 305 mm z-travel: 460 mm Control: Sinumerik 808D adv. Siemens Main spindle:: turning speed range - main spindle: 10 - 10.000 min/-1 power capacity - main spindel: 11 / 7,5 kW max. Torque: 70 / 48 Nm tool taper: BT 40 work table:: table surface area: 800 x 320 mm max. table load: 300 kg T-slots: 3x 14 x 100 mm distance spindle /table: 100 - 600 mm Tool-Presetter:: number of toolpositions: 12 pos. tool taper: BT 40 max. tool diameter: 70 mm max. tool weight: 6,0 kg change-time tool to tool: 7,0 sec feeds:: rapid traverse ( X / Y / Z ): 10 m/min feed speeds: max. 10.000 mm/min repeating accuracy: +/- 0,008 mm positioning accuracy: +/- 0,01 mm total power requirement: 15 kVA weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3,5 x 2,5 x 2,4 m Documents: swarf management system: Coolantsystem: Automatic Tool Changer: test probe: RENISHAW - Primo  ...

bore capacity in steel (diameter): 28 mm throat: 200 mm bore stroke: 105 mm table surface area: 360x340 mm Distance spindle/table max.: 540 mm turning speed range - stepless: 120-3000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale: a high-quality Modular Mass Production Tester (MPT) from NTS Optel – a professional testing and measuring system for automated quality control of optical components such as wafers, sensors or micro-optics., This machine was developed for the precise mass testing of optical components and offers the highest measurement accuracy, reliability, and flexibility in industrial applications. Its modular design allows the tester to be perfectly adapted to individual production or development requirements., Features & Equipment, • Integrated laser module (940 nm, circularly polarized) for precise optical illumination, • High-resolution camera with automatic calibration and large field of view, • Robot-based wafer handling (EFEM) for automated loading and unloading, • Analysis software for evaluating efficiency, contrast, uniformity, and performance, • CE certified, including ...

CNC Prima Power Laser Cutting & Welding Machine TYPE: Optimo 2545 Basic: X= 4,500mm, Y= 2,500mm, Z= 1,020mm Length of the shaker (per PC): 4000 mm Width 2250mm/ Duty width: 3000mm Height: < 400 mm Process path (with coupled movement): 10,000 mm Loading capacity: 600 kg/m2 Max Speed: 0.5m/s Max acceleration: 0.5m/s2 Max kickback:

I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.

Key data: 600 mm, 375 mm

ELB Optimal 6375 SPS, year of construction 1995, grinding area 600 x 375 mm, the machine has been overhauled by us currently, the guide tracks are scraped in tolerance of a new machine, the bearings of the grinding spindle have been changed, accessories: Electric Perm magnetic clamping plate 600 x 350 mm, automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter. The machine is functionally tested and can be viewed at our premises under power, we are also happy to take over the installation and training on site, as well as the service in the future

OPTIMA SYRINGE, CARTRIDGE AND VIAL FILLING LINE, MODEL SV125 Year of construction: 2018 Machine for filling of various products (syringes, cartridges and vials). MACHINE CHARACTERISTICS Working Height: 1960 mm Control Cabinet: 900 mm ± 15 mm Switch Cabinet Weight: 1020 Kg PRODUCTION CHARACTERISTICS Max Output: 8000 Syringes/hour, 5000 Cartridge/hour Compatible products: Ez-fill Syringe 1 ml long; Ez-fill Cartridge 3 ml Stoppers: Plunger Stopper 1 ml long; 3 ml Plunger Cartridge Nest: Nest 100 Syringe and Cartridge Tub: Tub 3, Tub PP DIMENSIONS Size (W x L x H): 1645 x 5175 x 2450 mm Weight: 2040 Kg

General SKU354T1034 LocationBarneveld MakeKtron TypeS-400 No.240-739 Main Features MaterialStainless steel Motor1.1 KW Inlet diameter370 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Metering screws Metering screwcheck Screw diameter42mm Pitch31mm Screw length700 With hoppercheck Hopper sizes370x370x370 Inlet370x370mm Outlet44mm With motorcheck With DC motorcheck 0,55kW, 180Volt, 1800rpm With breaking/mixing shaftcheck Motorcheck 0,37kW, 220/380Volt, 1390rpm Information Year of constructionunknown Mounted on framecheck With switchgearcheck(as is) Floorspace1,15x0,65m Total height1,8m Weight200kg Extra Specificationsktron features additional transport/mixing screw. screw Dia: 77mm screw Dia: 50mm screw Length: 480mm screw Shaft Dia: 22mm product Exhaust: 80x80mm motor data: 1.1kW, 220/380Volt, 28 ...

Manufacturer: Optimum Year of construction: 2024 Condition: as good as new, workshop tested Delivery time: immediately available Specifications Tip height: 165 mm Center width: 830 mm Circumferential diameter over bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Speed ranges: 16 steps, 70–2000 rpm⁻¹ Drive motor: 1.5 kW, 400 V, 50 Hz Spindle holder: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle cone: MK5 Tailstock mount: MK3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Gradients and feed Metric: 0.4-7 mm/rev (26 pitches) Inches: 56-4 Gg/1" (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Face feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed bezel (Ø 6–50 mm) Rotating bezel (Ø 8–3 ...

A small column drilling machine Optimum is available. Drilling capacity steel/cast iron: 30mm/35mm, spindle mount: MK4, speed: 2000rpm, quill stroke: 120mm, quill diameter: 75mm, column diameter: 115mm, table dimensions X/Y: 500mm/420mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/1950mm, weight: approx. 220kg. An on site inspection is possible.

System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement.

A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible.

Dimensions (L/W/H): 1300x1200x1650 mm Weight: 440 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement.

A barely used surface grinding machine Optimum is available. Grinding width: 220mm, grinding length: 470mm, grinding height: 350mm, table dimensions X/Y: 210mm/450mm, max. table spindle center distance: 450mm, grinding wheel dimensions X/Y/Z: 200mm/13mm/31.75mm. Machine dimensions X/Y/Z: approx. 1200mm/1450mm/2000mm, weight: approx. 800kg. Dokumentation vorhanden. An on-site inspection is possible.

Dimensions (L/W/H): 1300x1200x1650 mm Weight: 440 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.