129,676 used machines on RESALE, but how to find them? Machine Search
Dear Sir or Madam, We have in the offer for you The Tiger metal and scrap press.These are available with different press box dimensions and Bale dimensions (25 x 25, 30 x 30, 40 x 40). Cutting edges on all three sides of the box give the machine the ability to handle oversized materials. The machine is equipped with side pre-loading box, oil cooler and radio remote control. (further equipment possible) Out of stock. If you have any questions, please do not hesitate to contact us. To make an offer, we need your company data and a direct e-mail address.
stroke: . mm weight max.: 300 kg speed: . m/min total power requirement: . kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: . m Load capacity max 30 KN Load moment 50 KNm Tilt moment 93 KNm The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop. You want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
O&K FAUN V80, 8 to Diesel Forklift, 8000 KG, 3.70 m altitude, German Forklift, 8.000 h, Year 1980
Diesel tank - Heating oil tank - Tank system - Steel tank brand new - with 30,000 litres capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 9010 white. (Other RAL colours are also possible on request!) L = approx. 10.00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - General: You will receive a V ...
Heating oil Tank system Diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled incl. officially recognized test certificate. Tank environmental protection Wozniack . Specialist company according to § 19 Water Resources Act (WHG) offers as follows. Storage tank 50,000 litres double-walled new according to EN 12285-2 standard . The tank is new and will be equipped with the following fittings: 1 optical leak detector with type approval and leakage fluid(new) 1 filling tube with TW closure (filling cap) and dip tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII)(new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9.000 kg Of course, you can also design your tank s ...
DIEDESHEIM vertical lathe Vertifront 120-12 CNC. Electrics and geometry overhauled in 2007 for approx. 290.000,00 €! Former machine of the company Hoesch Rothe Erde Lippstadt, permanently maintained and maintained. Equipped with two turret supports (5-fold), protective hoods against emulsion vapors, housing see pictures, CE compliant. Details: Type 120-12 CNC Machine number L738 Year of construction 1983 Refurbished 2007 Space requirement approx. 20 sqm Weight approx. 20 to Power consumption approx. 110 kW Headstock Main spindle bearingsØ axial 500 mm radial 240 mm Cross Slide Unit Vertical slide stroke 800 mm (Z-axis) Paddling slide stroke 1,000 mm (X-axis) Basic hydraulics complete, system RING 2x2 axis CNC path control SIEMENS Sinumerik 3 TT Optional accessory 6-fold face plate clamping ideal for thin-walled workpieces ...
DIETEL length stop - with coarse and fiin adjustment Type: Links 4.0 Length: 4.0 meters (net) 4.2 meters (gross) Dimensions: Coarse hand adjustment, fine handwheel adjustment Dimensions: Absolute and incremental Battery: 3.8 volts Accuracy: 0.1 mm Display: LCD Included: stop arm - bring briefly to the saw Condition: functional controlled
Used glass lined reactor De Dietrich BE4000. New 1994. Max working pressure: 8bar Air quality delivered to the machine: lack of moisture, pollution
New: MB 12 - SH | 1.2 Ton Mini Excavator | with Warranty Location: Poland | Availability: Pre-order Product Overview: We offer the MB 12 - S|H, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 7.6 kW / 10.3 HP at 3,000 rpm Torque: 25.5 Nm at 2,880 rpm Fuel consumption: 275–280 g/kWh Cooling: Air-cooled Fuel type: Diesel Number of cylinders: 1 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pressure: 160 ...
Diesel forklift 2.5-ton load capacity with a Kubota engine offers impressive performance and is super maneuverable, even in tight spaces. Thanks to its efficient fuel consumption and robust drive, it is ideal for flexible use in warehouses and confined work areas. Specifications: - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 2,615 L - Fuel tank: 60 L - Transmission: 1-1 Powershift - Load capacity: 2500 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1070 x 100 x 40 mm - Total weight: 3680 kg - Vehicle width: 1170 mm - Total length with fork: 3646 mm - Total length without fork: 2576 mm Powerful Kubota diesel engine - Compact design for tight applications - Environmentally friendly & efficient according to EU Stage V - Ideal for w ...
Diesel forklift with a load capacity of 3,000 kg and a Kubota engine offers impressive performance and manoeuvrability. It is ideal for tight warehouses and confined work areas, as it ensures low fuel consumption and high reliability. With its robust construction and strong pulling force, this forklift is perfect for versatile applications in different environments. We offer a wide range of electric, gas and four-wheel drive forklifts with load capacities from 1 to 10 tonnes. If you need any further information, please do not hesitate to contact us. Specifications: - Load capacity: 3,000 kg - Engine: Kubota 4-cylinder diesel engine - Lifting height: up to 4,500 mm - Steering: Hydrostatic - Travel speed: max. 20 km/h - Tyres: pneumatic tyres, front: 6.00-9, rear: 6.00-9 - Total weight: approx. 4,800 kg - Tilt angle: 6° Tyres: - Front tire: 6.00-9 (pneumatic tire) - ...
Diesel forklift with a load capacity of 3,500 kg offers impressive performance and manoeuvrability, ideal for warehouses and tight work areas. With a powerful engine, hydrostatic steering, pneumatic tyres and high-lift equipment, it ensures efficient fuel consumption and high tractive force. We also offer electric forklifts, gas forklifts and four-wheel drive forklifts in various capacities and options, including chassis adjustment, double telescopic mast and an ergonomic cab for comfortable operation. - Load capacity: 3500 kg - Emission standards: EU Stage V, EPA Tier 4 - Engine: Kubota V2607-CR-EW03 - Power: 38 kW / 50.9 hp at 2200 rpm - Torque: 174.1 Nm at 1500 rpm - Displacement: 2,615 L - Fuel tank: 70 L - Transmission: 1-1 Powershift - Max. lifting height: 3000 mm (standard fork) - Fork dimensions: 1070 x 125 x 45 mm - Total weight: 4700 kg - Vehicle width: 1225 mm - ...
This rugged diesel forklift with a load capacity of 4,000 kg (8,818 lbs) is the perfect choice for demanding applications in tight storage areas. Equipped with a powerful engine, hydrostatic steering, pneumatic tyres and high-lift equipment, it offers excellent manoeuvrability and energy efficiency. In addition, we also have electric, gas and four-wheel drive forklifts in various designs and options such as chassis adjustment, double telescopic mast and ergonomic cab to meet all your special requirements. - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 2,615 L - Fuel tank: 70 L - Transmission: 1-1 Powershift - Load capacity: 4000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1070 x 130 x 50 mm - Total weight: 5310 kg - Vehicle width: 1410 mm ...
Diesel forklift 5.0 tons (5,000 kg, 11,023 lbs) is perfect for intensive use in large warehouses and when lifting heavy loads. Equipped with a powerful four-cylinder engine, hydrostatic steering, pneumatic tyres and a high-lift mast, it ensures fast and efficient transport of goods. In addition, we also offer electric forklifts that enable emission-free work in confined spaces, gas forklifts for balanced performance in various applications, and four-wheel drive forklifts that are ideal for outdoor use. Features: - Load capacity: 5000 kg - Engine: Cummins F3.8 - Power: 55 kW / 73.7 hp at 2500 rpm - Torque: 400 Nm at 1300 rpm - Displacement: 3.8 liters - Fuel tank: 140 liters - Emission standards: EU Stage V / EPA Tier 4 - Transmission: 2-2 Powershift - Maximum lifting height: 3000 mm (with standard fork) - Fork dimensions: 1220 x 150 x 55 mm - Total weight: 8160 kg - Vehi ...
Diesel forklift with a load capacity of 6,000 kg (6,000 kg, 13,228 lbs) offers reliable performance, even with heavy loads and challenging working conditions. Thanks to the hydrostatic steering, pneumatic tyres, high-lift equipment and dual-circuit braking systems, the truck remains manoeuvrable and safe even under extreme loads. If you're looking for a more environmentally friendly alternative, we also have electric forklifts for zero-emission operations, gas forklifts for greater flexibility, and four-wheel drive forklifts that are ideal for rugged use on construction sites and rough terrain. Specifications: - Engine: Cummins F3.8 - Power: 55 kW (73.7 hp) at 2500 rpm - Torque: 400 Nm at 1300 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 6000 kg - Max. lifting height (standard fork) ...
Powerful forklift for demanding journeys with 7.0T to lifting capacity (7,000 kg, 15,432 lbs). Cummins diesel direct injection, hydrostatic steering, pneumatic tyres, tilt. Ideal for lifting up and tilting! Also available in electric for zero-emission transport, in gas for medium distances, in transports and in all-wheel drive for difficult off-road models. Specifications: - Load capacity: 7000 kg; - Engine: Cummins F3.8; - Power: 55 kW / 73.7 hp at 2500 rpm; - Torque: 400 Nm at 1300 rpm; - Displacement: 3.8 l; - Fuel tank: 140 liters; - Emission standards: EU Stage V / EPA Stage 4; - Transmission: 2-2 Powershift; - Maximum height of the construction: 3000 mm ; Fork dimensions: 1220 x 150 x 70 mm; - Vehicle width: 1995 mm; Overall length: 4800 mm – with fork / 3580 mm – without fork; Control: steering wheel and precise joystick; - Tires: front: 8.25-14-14PR, rear: 8.1 ...
Diesel Forklift Capacity 8.0 T (8,000 kg, 17,637 lbs) is just the right thing for real heavy work. A powerful Cummins diesel engine, hydrostatic steering, pneumatic tires and rough terrain stabilizers ensure maximum comfort and efficiency, especially with heavy loads. In addition to diesel forklift trucks, Jungheinrich also offers electric forklifts for a clean and emission-free solution, gas forklifts for versatile use and all-wheel drive forklifts for universal use in multi-vehicle depots. Specifications: - Engine: Cummins F3.8 - Power: 90 kW (120.6 hp) at 2200 rpm - Torque: 500 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 8000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1220 x 150 x 75 mm - Total weight: 9850 kg - Vehicle width: 1995 mm - ...
The diesel forklift with a load capacity of 10.0 tons (10,000 kg, 22,046 lbs) has been specially developed for the transport of particularly heavy loads. Equipped with a modern Cummins diesel engine, hydrostatic steering, pneumatic tires and a closed hydraulic system, it offers the highest performance and efficiency. For special requirements, we also have electric forklifts for zero-emission solutions, gas forklifts for versatile applications and four-wheel forklifts that are great for difficult off-road conditions. Specifications: - Engine: Cummins F3.8 - Power: 90 kW (120.6 hp) at 2200 rpm - Torque: 500 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 10,000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1220 x 175 x 80 mm - Total weight: 12,900 kg ...
Vollgatter Wurster Dietz GDZ71 durchla 710mm hub 600mm Motor 70kw Spanwagen hilfswagen Spaltkeil rollerngang
Besaummer Wurster Dietz FR7 Schmithohe 160mm rollengang steigforder kapsaege
Key data: 500
ORMAL (DIEFFE) dowel cutter model TT500 with: - fast-moving blade D=500mm - Blade motor 7.5 hp, Volt 380 - cutting section from 40x40mm to 130x140mm - Automatic loader with transport clamp for the bars - magazine length 5 m (open at the back, can carry longer bars) - production capacity up to 45 cuts per minute of 80x80xL=80mm dowels - overall dimensions approx. 6 x 1.8 m - complete with electrical panel CE standard machine
Toyota, Forklift Diesel BJ 2018 Toyota 40-8FD40N , 4.5 to / 4500 kg Payload 1.Hand, bought from us New, available now just look at it on site Full view duplex mast 4000mm, with lateral shift and fork positioner, Manufacturer Meyer, forks/tine length 1200mm approx. 11,500 BH / operating hours, 408FD40N10563 Year of manufacture 2018 Comfort cab, heating Mini lever for quick and easy operation, Switch on the left of the steering column for changing direction of travel On-board computer including load weight display Comfortable Grammer seat wide fenders and 300mm wide pneumatic tires also suitable Price VHB Diesel forklift type 40-8FD40N with SAS system for active stability Basic load capacity 4500 kg Load center 500 mm Mast type full clearance duplex Lifting height approx. 4000 mm Overall height approx. 2990 mm Free ...
Used glass lined reactor with capacity 100 L. Manufacturer DeDietrich. Year of manufacturing 1986. Technical parameters: 1. Working pressure: - tank -1/6 - jacket -1/6 2. Working temperature: - tank -25/+250 - jacket -25/+250 3. Capacity: - 105 L tank - jacket 24 L
Aluminium angled conveyor belt incl. substructure horizontal area 1,500mm Rising area 2,100mm Angle in bend 35° Feed height: 200mm Discharge height 1,500mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm Centrally welded T-40 cleats - approx. 400mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm Accessories: Design for the suspension of the overbelt magnetic separator Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300 ...
Aluminium angled conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling unevenness horizontal area: 1,500mm Rising Area: 4,000mm Angle of inclination in bend 45° Discharge height: 3,000mm Height of horizontal: 200mm Execution: Aluminum construction - 2-fold profile reinforced 90x45mm Drive roller + deflection roller S235 steel welded and machined Ø100x420mm convex overtightened, shaft fixed with tension bearings. Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt Conveyor belt width: 400mm 2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded 28 T-40 cleats, approx. 400mm pitch Belt mate ...
Aluminium angular conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling horizontal area: 2,500mm Rising Area: 800mm Angle of inclination in bend: 40° Conveyor belt total length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Propulsion: Motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive etc. ready for connection, motor 2 pcs. scalloped edges 80x45mm 2-ply particularly transversely stable Usable width 370mm
Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...
Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...
Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300mm convex overtightened, shaft fixed with tension bearings. Two-hole flange bearing UCFL with grease nipple, sealed bearing cage Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt endless GB30 black matt 7 x T20 cleats high-frequency welded High-quality 3-fold aluminum construction 2 side mudguards V4A Magnet dimensions: 700x230x120mm magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole shoes.
Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm (customizable) Rising area 5,000mm (customizable) Angle in bend 35, 40 or 45° Feed height: horizontal (individual) Drop height individually adjustable Construction: height-adjustable (to be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Propulsion: Motor 1.1KW ( adjustable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 cleats - 400mm pitch 2-ply particularly transversely stable Permanently mounted overbelt magnetic ...
Permanent Overbelt Magnetic Separator TYPE DMPM1400 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite ...
Permanent Overbelt Magnetic Separator TYPE DMPM1200 1.800 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite ...
Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...
Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt without substructure Horizontal area 6,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PVC conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control Scalloped edge: 80x50mm flush with both sides Centrally welded T75 studs 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently approx. 2-3 w ...
Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt incl. substructure Horizontal range 5,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Scalloped edge: 80x50mm flush with both sides 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is curr ...
Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal area 800mm Rising range 2,000mm Angle in the bend 45° Feed height: 300mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edges, blue FDA- Food compliant, food certificate is included Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional Freely steerable transport rollers incl. parking brake Scalloped edge: 50x35mm T-40 cleats - approx. 300mm pitch 2-layer particularly transversely stable Usable width: 290mm, results as follows: Cross arrangement 70+35+290+35+70mm All our prices are net prices plus VAT. - can also be viewed under power after consultation!
Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal range (customizable) Rising Range (Customizable) Angle in the bend infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable Conveyor belt width (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies in providing customers with exactly what they really need. Together with our customers, we develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contac ...
Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies ...
RMH Chain Mill Capacity container 50 litres Drive: 5.5 KW/400 V For shredding electronics, connectors, monolith Adjustable via hand lever and adjustable in different positions. Tiltable
Diebels Recyclingmaschinen_Kabelgranulieranlage RMH 2 D Granulator: 11 KW Connected load: 19.6 KW Weight: 2,450 kg Capacity: 100-250 kg/with pre-shredder up to approx. 300 kg/h Optionally available with shredder/conveyor system with permanent magnet
Diebels Recyclingmaschinen_Kabelgranulieranlage EUREKA 15 Granulator: 15 KW Connected load: 22 KW Weight: 2,500 kg Capacity: 100-250 kg/with pre-shredder up to approx. 300 kg/h Optionally available with shredder/conveyor system with permanent magnet
Diebels Recycling Machines -Cable pelletizer EUREKA 15 LINE Granulator: 11 KW Pelletizing system connected load: 22 KW -Conveyor system with magnetic head roller Drive: 0.37/400 V -Pre-shredder RMR 170/400 Drive: 12 KW with 0.75 KW Hydraulic Gate Valve Pelletizing system Eureka 15 used system overhauled from year: 2006 Conveyor system with magnetic head roller New machine Pre-shredder RMR 170/400 new machine Electrically configured with power control Capacity with pre-shredder up to approx. 280 kg/h
Folding carton machine from service with up to 140 cycles and lowerable conveyor for double packaging
Short-cycle press Fabr. Dieffenbacher Dimensions plates: 560 x 220 cm Heating Medium: Thermal Oil
maximum number of results exceeded
please refine your search
