137,844 used machines on RESALE, but how to find them? Machine Search
Injection pump diesel pump JCB Stanadyne A3 DB4429-6101 Condition: as good as new (test run ex works) Manafacture: Stanadyne Part Number: A3 DB4429-6101 JCB number: 320/0674 On sale are 40 injection pumps from 2012 to 2020. The pumps were subjected to a test run at the factory. When we arrived at our premises, they were staked out, dismantled and stored.
Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...
Diesel generator / new and unused Make: Ford Model FDT10200SE Voltage: 230 V and 400 V Continuous power: 7.5 KvA Short-term maximum power: 7.9 KVA corresponds to 9.75 kW Pure Sine Wave: Yes Frequency: 50Hz Starting Method: Electric Volume: 72 dB ATS: No Fuel tank capacity: 14 litres Fuel: Diesel Weight in kg: 168 kg Runtime: 7 hours at 75% load Dimensions (LxWxH): 920 x 520 x 720
Diesel filling station - Home filling station - Gas station - Small filling station composed of: 1 x 20m³ storage container - brand new 1 x fuel dispenser type eco 75 - brand new Description steel tank: 20,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight app ...
Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)
3 x Mak 9M25 engines Available from stock 2850 Kw at 720 Rpm in good condition From our stock in Turkey
used
Ref. -No.: 10280 Manufacturer: GUCBAR Year of construction: 2021 Art: Diesel model: GJB9500-E3 Dimensions (L x W x H): 720x560x585 Weight: 98 rated capacity: 8.0 Maximum power: 7.5 phase: 3 engine: SC192FB
Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated -Year of manufacture: 1998
58 Mw MAN 18V48/60TS power plant 50 Hz 3 x Man 18V48/60TS generators together with auxilary equipments Approx 4000 Working hours each 58 Megawatts total power 19305kw each at 500 RPM and 50 Hz Engines year of build 2014 with ABB AMG1600UU12 DSE Alternators Alternators year of build 2015
Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated
Soundproof Diesel Generator Set Emergency Generator Set Manufacturer: Lucla Type GLU-33-SK Specifications Continuous power: 30 kVA Standby power: 33 kVA Mains voltage: 400/230 V Amperage: 43.3 A Max. sound level: dB(7m) =78 Engine: KOFO Model: K4100D Intake system: naturally aspirated engine Fuel Injection System: Eddy Number of cylinders: 4 Displacement: 3,613 L Bore x stroke: 100x115 mm Compression Ratio: 20:1 Nominal speed: 1500 r/min Engine power: 33 kW Controller: Mechanical Starting voltage: 12 V Generator: Lucla Model: LU 184GS Phase: 3 Voltage: 400 V / 230V 43.3A Line type: 3 phase 12 cable, Y type Stock: 1 Power factor (cos f): 0.8 Frequency: 50 Hz Continuous power: 30 kVA / 24KW Arousal Type: Brushless, Self-Arousal Voltage Regulation: % ±0.5 Protection class: IP 23 Degree of insulation: H Altitude(above sea level): m =1000 Controller: ...
Key data: 1180 KW, 1910 1/min
TO WHOM IT MAY CONCERN WE VE MTU ENGINE 16V 396 TB 34D EX GEN SET ENGINE AT OUR STOCK. ENGINE WAS USED EMERGENCY GENSET ENGINE . IT WAS USED ONLY 267HRS SINCE NEW ... ENGINE IN VERY GOOD CONDATION . PLS FIND ENGINE DETAILS ON BELOW TYPE : 16V 396 TB 34D ENGINE NO. : 5591283 YOB. : 1993 POWER. : 1880 KW .RPM. : 1910 / 1500 1/min ENGINE AT OUR WORK SHOP READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .
Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head -for pipe size: max. 2 inch -5x Cutting tips: 3/4 1 1 1/4 1 1/2 2 inch -2x Threaded ratchets: Type 111-R/12-R -Price/Sale: complete -Weight: 12.8 kg
Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head -for pipe size: max. 1 1/4 inch -4x cutting tips: 1/2 3/4 1 1 1/4 inch -Number: 1 set available - Price: per set -Dimensions: -Weight: 6.6 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing with the pictures -Total length: 200 mm -Total height: 188 mm -Weight: 6 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25 mm -Drawing with the pictures -Total length: 303 mm -Total height: 171 mm -Weight: 10 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Radius: R8 -Thickness: 60/25 mm -Drawing with the pictures -Total length: 569 mm -Total height: 176 mm -Weight: 30 kg
Key data: 33 KW, 45 kVA, 230 V
Nominal power (PRP) kW 37.7 Nominal power (ESP) kW 41.8 Manufacturer: YANMAR Model No.: 4TNV98TZGGEHR Engine Type: Diesel, Four-Stroke Type of Injection: Direct Type of intake turbocharger Cylinders, number and Arrangement 4-L Diameter x travel mm 98 x 110 Total displacement L 3,319 Cooling System Coolant Engine Oil Specifications API CF,CF-4,CI-4 Compression Ratio 18.1
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/40 mm -Drawing with the pictures -Total length: 599 mm -Total height: 68 mm -Weight: 28 kg
Nominal power (PRP) kW 37.7 Nominal power (ESP) kW 41.8 Manufacturer: YANMAR Model No.: 4TNV98TZGGEHR Engine Type: Diesel, Four-Stroke Type of Injection: Direct Type of intake turbocharger Cylinders, number and Arrangement 4-L Diameter x travel mm 98 x 110 Total displacement L 3,319 Cooling System Coolant Engine Oil Specifications API CF,CF-4,CI-4 Compression Ratio 18.1
Key data: 1660 , 400
TO WHOM IT MAY CONCERN ; WE VE USED DEUTZ BV 9M 628 GENERATOR AT STOCK . WE CAN OFFER AS COMPLETE GENSET OR ONLY DIESEL ENGINE WITH CUSTOMER INTEREST . ENGINE IN GOOD RUNNING ENGINE . IT WAS USED AS EMERGENCY GENSET AT FACTORY PLS FIND DETAILS ON BELOW TYPE. ; BV 9M 628 POWER. : 1765KW. /. 2400HP REVOULATION. : 1000RPM YOB : 1986 ALTERNATOR DTLS RATED POWER. 1660KW HZ. 50Hz YOB. 1986 RATED VOLTAGE. 400V ENGINE READY TO TRANSPORT AT ISTANBUL TURKEY IF YOU VE ANY FURTHER QUESTION PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY
6 x 12V32LNE Wartsila gen sets Available from our stock in Turkey 1998 made in good condition 4860 Kw at 720 RPM 60 Hz 8790 kVA average working hours: 28.000
Stork Werkspoor TM 410 Cylinder heads 18 pcs available Withouth cracks or weldings water pressure tested 100% genuine, Original heads
We sell a used Volvo engine TWD1211P as a spare parts carrier, The block has a hole, cylinder head , piston , Injection pump, etc. good
Key data: 572 mm, 400 mm, 32 A
Die-sinking EDM machine x 350 mm y 250 mm z 315 mm Distance table - quill 550 mm Chuck 3R Macro Erosion Power Module EPO Fire extinguishing system Data Dielectric 250 liters extracted Length 1.75 m Width 2.10 m Height 2.53 m
Cutting Clamp Kit, Hand Pipe Thread Cutter, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 3/4 inches -5x cutting tips: 1/8, 1/4, 3/8, 1/2, 3/4 -Number: 1x sets available -Price: per set -Dimensions: 645/100/H70 mm -Weight: 5 kg
Cutting Clamp Kit, Hand Pipe Thread Cutter, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 1 1/4 inches -Cutting tips: 7 -Transport case -Weight: 9.8 kg
Generator: MGH5 max.travel range: X 800mm Y 500mm Z 400mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 32 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er
Generator: MGF max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero
Diesel tank system, diesel tank, gas station, fuel tank system -Tank: from work platforms of GSL (German Standard Lift) -universal: usable -for: diesel, heating oil, petrol -Contents: 25 liters -Number: 1x tanks available -Price: per piece -Dimensions: 290/445/H220 mm -Empty weight: 5.4 kg
Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Dimensions: 800/400/H1200 mm -Weight: 180 kg
Generator: MGF2 max.travel range : X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode / parts changer: Erowa UPC 5 position, ITS 72 - 90 position, ITS 148 - 15 position cooling device for dial
Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode / parts changer: Erowa UPC 5 position, ITS 72 - 90 position, ITS 148 - 15 position cooling device for diale
Pistons 2 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Total price: 2 pieces -Weight: 1.4 kg/piece
Pistons 4 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Complete price: 4 pieces -Weight: 1.4 kg/piece
Piston 3 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 3 pieces -Weight: 1.4 kg/piece
Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er
Generator: MGF2 Max. Travel range: X 450mm, Y350mm, Z 350mm, C yes Clamping of tool: Erowa System ITS Clamping of parts: Erowa Sysem UPC Electrode / parts changer: Erowa UPC 10 position, ITS 72-90 position Cooling device, fire extuiguishing
Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool, clamp pressing tool, upper tool -Die tool: Form tool / press tool 2-part -Lower part: unscrewable -Socket: Ø 40 mm -Dimensions: 260/90 / H175 mm -Total weight: 18.1 kg
Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool, clamp pressing tool, upper tool -Die tool: Form tool / press tool 2-part -Pressure profile: Ø 70 x 140 mm, 15 mm overhang -Side part: unscrewable -Socket: Ø 40 mm -Dimensions: 250/70 / H298 mm -Weight: 21 kg
Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool, clamp pressing tool, upper tool -Die tool: Forming tool / press tool -Socket: Ø 40 mm -Print area: 125 x 15 mm, see photo techn. drawing -Dimensions: 125/50 / H163 mm -Weight: 4.3 kg
Generator: MGF max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts: Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Erowa ITS / UPC Er
Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er
Joint cutter, asphalt cutter, concrete cutter -Manufacturer: Cedima, joint cutter type CF 16.1D -Saw blade: Ø max. 480 mm -Engine: Hatz E 780U 7 kW -Dimensions: 1150/680/H920 mm -Weight: 250 kg
Threading dies, replacement dies, threading head with chaser dies, threading stock, threading machine, pipe thread cutter -Manufacturer: Ridgid, thread dies set unused original packaging -Type: 1/2 BSPT -Number: 2 sets available -Price: per set -Weight: 0.1kg/set
Die holder, notching tool, punching tool, punch, punch die, punch stamp, punching die, rotary die -Manufacturer: Mubea, die-cutting die, round die Ø 52 mm -Type: Mubea 52 -Overall dimensions: Ø 150 x 40 mm -Weight: 4.7 kg
Generator: MGH max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero
Generator: MGH max.travel range: X 800mm Y 500mm Z 400mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 32 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Erow
Die holder, notching tool, punching tool, punch, punching die, punching punch, punching die, round die, die reduction -Manufacturer: Mubea, punching tool holder die reduction -Type: 105 - 80 mm mounts -Dimensions total: Ø 150 x 60 mm -Weight: 4.7 kg
diesel tank system, diesel tank, gas station, fuel tank system, fuel tank, petrol tank -Diesel tank: fuel tank, universal use -Content: approx. 45 liters -Tank: dimension 620/220/H330 mm -Total dimensions: 660/220/H610 mm -Curb weight: 11.7 kg
maximum number of results exceeded
please refine your search
