open die used for sale

Door opening button, push button, door opener -Manufacturer: eao, door opening button with mounting kit ovp -Type: 56-210102-00 702 -Voltage: max. 137 VDC -Quantity: 1x door opener available -Transport dimensions: 170/140/H40 mm -Weight: 0.1 kg

Door opening button, push button, door opener -Manufacturer: eao, door opening button with mounting kit ovp -Type: 56-210102-00 405 -Voltage: max. 137 VDC -Quantity: 1x door opener available -Transport dimensions: 170/140/H40 mm -Weight: 0.1 kg

Door opening button, push button, door opener -Manufacturer: eao, door opening button with mounting kit ovp -Type: 56-210102-00 847 -Voltage: max. 137 VDC -Quantity: 1x door opener available -Transport dimensions: 170/140/H40 mm -Weight: 0.1 kg

Door opening button, push button, door opener, automatic door sensor -Manufacturer: eao, Opening and presence detectors for railway interior doors, original packaging -Type: RS-1 Hitachi -Technology: Active Infrared Technical data: see photo -Transport dimensions: 200/140/H40 mm -Weight: 0.1 kg

Practice door for door opening training, door opening techniques, training door -Practice door: for door opening training -Purpose: to train rescue workers in door opening techniques -Material: sturdy steel door with frame and base -Overall dimensions: 1280/1230/H2200 mm -Weight: 200 kg

Open-end wrenches, ring wrenches as remaining stock -Open-end/ring wrenches: various sizes, with transport case -Weight of tool: approx. 400 kg Manufacturer: various brand manufacturers, see photos -Submission/Price: complete -Transport box: 1200/810/H350 mm Total weight: 466 kg

Open-end wrenches, ring wrenches as remaining stock -various sizes -Weight of tool: approx. 100 kg -Manufacturers: Gedore, Promat, Rahsol -Transport box: 800/450/H320 mm -Weight including packaging: 130 kg

Camu decoiler 3 ton Dimeco straightener - 800 x 1,1 mm - 11 x 60 mm straightening rolls - 4 x 60 mm feeding rolls - weight: 850 kg CNC mircrofeeding unit Pressix excentric press - 100 ton - 65 strokes/min - adjustable stroke: 10 gt; 130 mm - table: 950 x 660 mm - max opening: 370 mm

Quick-opening milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000speed max. 15000 rpm at 70% EDratio ratio 1:5Power transmission up to approx. 2.5 kWProduct dimension 110 mm (machine spindle to clamping nutTool holder MK4 with tightening thread M16Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mmWeight 6.5 kgGood condition; used

Auction-ID: A1-41277-704

Auction-ID: A1-41277-518

Ø approx. 650mm Auction-ID: A1-46933-190

Press force: 1250 KN, Stroke rate: 55 min-1, Plunger adjustment: 75 mm Stroke: 20-120 mm, Motor power: 11 kW, Voltage: 380 V Machine weight: 8.6t Projection: 340 mm, Pusher clamping surface: 620 x 300 mm, Table clamping surface: 650 x 1000 mm, Ortlinghaus hydraulic clutch with double brake, Two-hand control device Demolition at the pestle was professionally repaired.

Offer 25450 Specifications: - Compressive force 100 t - Projection 300 mm - Table size approx. 650 x 450 mm - Height-adjustable table - Diarrhea hole in the table approx. 200 x 100 mm - Large installation height approx. 450 mm - Plunger area 70 x 140 mm - Peg hole in the ram 40 x 80 mm - Tappet adjustability 60 mm - Stroke adjustment 10 - 100 mm - Stroke rate 80 rpm - Pneumatically assisted coupling - Drive 380 V / 5.5 kW - Space requirement approx. W 1350 x H 2550 x D 1600 mm - Weight approx. 5000 kg

Tilting

Key data: 60 t, 370 mm, 10 mm

Eccentric Press Compressive Force 60 Ton Equipped: -Hydraulic clutch -Hydraulic overload protection

Key data: 100 t, 330 mm, 10 mm

Press Type P 100 RE Pressure 100 ton Free passage between the two uprights 420 mm Slab dimensions 610 x 410 mm Table dimensions 950 x 650 mm Installation height plunger lower 400mm Plunger position 90 mm Stroke rate 55 min Motor power 7.5 KW Weight 7000 kg Press is equipped : - Air coupling - Hydraulic overload protection

The AutoDoor ADxxxC is a customer-specific version with cylinder function. The stroke is precisely adapted to the machine model. This model is particularly suitable for special applications where a classic electric hoist drive is not sufficient. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrated into the product as standard. - Full safety classification according to EN ISO 13849-1 performance level PL d. - Connections are available on both sides and  ...

RÖCHER conversion 1991 (formerly SCHÖN) Pressure capacity 1,600 kN Plunger stroke160 mm Table dimensions 850 x 650 mm Light barrier control next due exam February 26 Tenon clamp lock in the ram Express lowering speed 274 mm/s Working speed 20/10 mm/s Return speed 273 mm/s Drive power 30 kW Operating voltage 380 volts/50 Hz Fuse max. 100 A

Steam tank with pneumatic opening - Lenght mm. 2100 - Diam. mm. 700

The machine is in good technical condition, testing is possible after prior agreement. We have a video of the machine available.

WMW PYE 250 ton Capacity: 250 ton Depth of throat -- ramcentre: 360 mm Max ram adjustement: 500 mm Drawning speed: 200 mm/sec Returning speed: 110 mm/sec Distance between table - ram: 1000 mm Ram area (L x D): 900 x 630 mm Eletric motor (power): 20,5 kW Weight: 8,2 ton

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, industrial can opener for large cans,, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punching crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.

New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,

Gastro Table - Can Opener / Industrial Opener / 60 cmâ Product Descriptionâœ" Item Condition: New and Packedâœ" Manufacturer: SCHNEIDER GmbHâœ" Material: Stainless Steelâœ" Length: 600 mmâ Details see pictures

Key data: 10 t

Various spare parts for eccentric press - brands SMERAL and VSS KOSICE

open distribution rack 45 U WDH 59.5 cm 59.0 cm 2.14 m bought as seen without warranty Pickup Ideal for the installation of passive and active network components

Key data: 1 t

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or manual release, fine adjustment without UVV, pressure and stroke! Fully functional, can be visited under power

approx. 198 pieces of open-fronted storage stacking boxes, metal, similar type: 14/7-2, approx. 50 x 30 x 20cm, with carrying rod - used - : Price per piece ex location: now only 7 € instead of 9.-€ (net)! Price for complete acceptance: now only 5 € instead of 9.-€ (net) / piece. Manufacturer: unknown, Type: similar to SSI Schaefer 14/7-2 l (for painted) Dimensions: 50cm deep x 31cm wide x 20cm high Dimensions inside: approx. length: 450 x width 300 x height 190mm Quantity: approx. 9,000 pieces Green With support rod Material: Sheet steel Load: Single: approx. 120kg Stack: 1.200kg Content: approx. 26L Weight: approx. 4kg Condition: very good Available: immediately Location: approx. 198 units in 63843 Niedernberg

Consisting of 20x SSI open-fronted storage bins in different sizes, incl. pallet Auction-ID: A1-46781-33

Overview Manual stainless steel oyster opening device with lever mechanism and fixed base. Technical details - Material: Stainless steel - Operation: Manual with lever mechanism - Base: Fixed base plate - Blade: Adjustable vertical blade assembly Included Accessories - Suction cup feet for stable attachment to the work surface Status and location Used condition – sold as is, without warranty. Auction-ID: A7-45941-1

Includes 9pcs of Opengate/Geist SwitchAir - a passive or active airflow management device designed to prevent network switch overheating in data center racks Auction-ID: A7-46739-24

Oil and AdBlu drums 200 l 2x AdBlu starter with electric pump, 2x engine oils CASTROL and others 5W30, 7 drums brake cleaner and engine oil 0W20, a total of 3 electric pumps, filling pumps outside the room, without waste oil tank

pine cabinet size: W112 x D70 x H115 cm. Including content Auction-ID: A1-46623-118

With 4 swivel castors, lid to open, front removable e.g. for dishwasher heavy version used, older Auction-ID: A1-47205-2588

Drilling for tilt and turn Capacity / Performance: 3 45 s plugs / 4 55 s plugs / 5 65 s plugs Drilling and screwdriving 3 screw loaders Inlet and outlet conveyor included Warning: lot under allocation Quotation for dismantling and loading only on request Auction-ID: A1-47012-5

Nögel Roof 75m²/Roll, 150g/m² Auction-ID: A1-40890-92

Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die -Manufacturer: Mubea, punching die round die Ø 75 mm -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Reversible prism, 1-piece die block for die bending machineBending tool for press brakeReversible prism with 6 different prismsPrism size 30 mm with 3 mm radius for 90, 40 mm with 4.5 mm radius for 90 50 mm with 4 mm radius for 90, 18 mm for 90, 10 mm for 90 12 mm for 45Dimension 90 x 88 mmPrism length 3000 mmWeight 147 kgGood condition; used

Hydr. Press brake, die bending machine HAMBURGER JONESCHEIT type HYPM 70-2600Fabr. No. 4004 Year of construction 1987Printing capacity 70 ton. Working length 2600 mmStand width 2770 mmPlunger stroke 60 mmDistance table - ram max. 390 mmTable size 2750 x 200 mmMotor power 7.5 kWWet connection 380 volts, 50 Hz.- Crimping depth via mechanical fixed stop with electric adjustment and mechanical depth indicator- Lower tool consisting of 2 segments, each 835 mm, with 2 different prisms (15 and 24 mm)- Upper tool,

For sale here is a distributor injection pump from MAN / Bosch. It is for the MAN 12 cylinder diesel engine. MAN part number: 51.11103-7752. See nameplate. For more data, please refer to the pictures. The pump is as good as new. Ask for price if interested. Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, with the exception  ...

Air cooler with water circuit of 300 KW emergency diesel Engine cooling with cooling fins, fan and water circuit. Suitable for emergency diesel up to 300 KW engine power. previous use: Henschel Diesel 304 KW Application: Cooling of emergency diesel up to 300 KW Serial Number: – Type: Air Cooling with Water Circuit Year of Make: 1962 Hours: 769 Dimensions [m]: 1.4 x 1.1 x 1.6 Weight: 441 kg

Storage tank, storage tank, diesel tank, fuel oil tank, steel tank, yard filling station, service filling station - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 3.80 m - D = 1.60 m - weight approx. 1.6 to. - ex works, freely charged - General: You will receive an invoice with VAT shown. The purchas ...

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

AT-Motoren alle sofort ab Lager lieferbar mit Garantie info@miw-zeven.de

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 16,000 liters double-walled used, with a used diesel pump DK 70 EZ: The pump is 1 year young and was overhauled by the manufacturer general. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 diesel pump DK 70 EZ Container dimensions Length 8,290 mm Diameter 1,600 mm Weight approx. 3,000 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...