online machines used for sale

Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 165 mm Max. honing length: 406 mm Spindle speeds: number (steps): 12 from: 200 rpm up to: 2500 rpm Total stroke: 80 - 310 mm Stroke speed: number (steps): 5 from: 80 s/min up to: 310 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.73 kW Machine´s weight about: 530 kg Overall dimensions machine: Length: 1830 mm Width: 1250 mm Height: 1700 mm Automatic workpiece honing unit

OSTAS ROUND BENDING MACHINE TYPE SBM 2070 x 95 -Capaciteit 2070 x 1.5 mm -Walsen Conisch -Bovenrol Wegdraaibare -Electrically adjustable achterrol -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

1 of used KHS/Kisters SP100V film-only shrink-packer (multi-packer) operating from right to left, with CB120 laner/divider, new 2004. Capacity upto 100 cycles/minute. The SP 100V was supplied/modified to pack standard (66 mm diameter x heights 115/168 mm) 330 ml (500 ml in future) beverage cans as: 2x2=4 3-lanes, 3x2=6 3-lanes, 4x2=8 2-lanes, 3x3=9 2-lanes and 4x3=12 2-lanes. The CB120 was designed to lane the 6-packs from 3 to 2 lanes and divide the 8-packs (previously turned from long- to short-side leading) from 2 to 3 lanes. Combined controls for the above machines as wells as inter-connecting pack conveyors. Interconnecting conveyors also available.

WEIBERT WJ-D53 Thickness Planers WEIBERT WJ D53 NEUMASCHINE! 400V 5,5 KW (7,5 HP) n = 5000 RPM Planing width 530 mm Max.Spanabnahme 8 mm Planer shaft D = 125mm 4 turn blade shaft Clearance height from 3 to 300 mm Feed speed of 8 and 16 m / min. Feed motor 1.5 KW (2 HP) Dust nozzle by 160 mm Electronic height adjustment of the Thicknesser table with display Machine table, Planer shaft bearing block and table management from GRAUGUÃ?! G & WJ-D53

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Operating hours: 54112 Technical data Cut range: round up to: 10 - 260 mm Square: 260 x 260 mm vertical hydraulic Automatic Cut length: min.: 5 mm max: 680 mm Max. automatic forward feed length: 680 mm stepless from: 15 m/min up to: 125 m/min Band length: 4115 mm Band width: 41 mm Sheet thickness: 1.3 mm Voltage 50 Hz 3x: 380 Volt Power: 4 / 6.5 kW Machine´s weight about: 1915 kg Overall dimensions machine: Length: 2125 mm Width: 1930 mm Height: 2100 mm Various accessories: Automatic forward feed Material bearing lenght: 1 m Roller conveyor Coolant system Chip conveyor

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Distance between uprights: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 8000 mm Table width: 2800 mm Travels: Y axis: 9000 mm Z axis: 1250 mm W axis: 2200 mm Distance table to spindle max.: 2806 mm Distance between columns: 3200 mm Table load max.: 64000 kg Taper in spindle: 60 ISO Spindle speeds: number (steps): 16 from: 20 rpm up to: 600 rpm Feeds: X axis from: 5 mm/min up to: 3000 mm/min Y axis from: 5 mm/min up to: 3000 mm/min Z axis from: 5 mm/min up to: 2000 mm/min W axis from: 5 mm/min up to: 750 mm/min Creep speeds: X axis: 5 - 3000 mm/min Y axis: 5 - 3000 mm/min Z axis: 5 - 2000 mm/min W axis: 5 - 50 mm/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 100 kW Overall dimensions about: Length: 21000 mm Width: 7800 mm Height: 6622 mm

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Diameter sawing blade: 0 mm Technical data Execution: semi-automatic Swivelling range: +/- 90 ° Saw blade diameter: 300 mm Max. saw blade diameter: 315 mm Cut range: round max. tube: 100 mm Max. automatic advance length: 500 mm Voltage 50 Hz 3x: 380 Volt Power: 4.33 HP Machine´s weight about: 650 kg Overall dimensions machine: Length: 1500 mm Width: 800 mm Height: 1700 mm Various accessories: Automatic forward feed Coolant system Material bearing lenght: 3200 m Machine base

This vertical lathe was built in 2014 for our customers. At that moment, he lost a contract work for this machine. That's why he wants to sell this machine. This machine is under power. Delivery time: immediately Control: Siemens 840 d Support number: 2 pcs (one is cnc controlled, conventional second) Turning diameter: 2500 mm Height of turning: 2200 mm! Table diameter: 2250 mm Table load: 16 000 kg Max table speed: 120 RPM Main motor power: 55 kW

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Square: 250 mm Execution: Horizontal hydraulic Automatic Cut length: min.: 3 mm max: 2 X 400 mm Cutting speed: stepless from: 14 m/min up to: 116 m/min Roll diameter: 460 mm Band length: 4100 mm Voltage 50 Hz 3x: 380 Volt Power: 4.00 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 1350 mm Various accessories: Coolant system

CESURBEND TUBE OF GRINDERS TYPE PN 90 -Capaciteit 17-90 mm -Roll met 10 -Hoekinstelling -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Lace high 400 mm Drehlange 700 mm, hydraul. Tailstock more info on request

Brand: APV Gaulin Type: MC 45-5TPSX capacity: 7.500 l / h current pressure: 345 bar Stages: 1 stage Dimensions: 215 x 152cm x 160cm (Lxwxh) YOM: 1982 Engine: PLS 280M; 90KW; 975 r/min; 380 V; 176 amp; 50 Hz

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 250 rpm up to: 4000 rpm Feeds: Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1100 mm Width: 600 mm Height: 2100 mm Various accessories: Quick change device Motorized table adjustment

Ernest Bodmer type: MINIV - 350 (tool measurement) Serial number: 3152 ISO/50 Y2d0vum9 The HSK recording is not included. Measurements L x B x H 1250 x 900 x 1900 Tool measuring machine is fully functional. Tool measuring machine is in perfect condition. We love to hear from you.

Brand: APV Gaulin Type: MC 18-3TPS capacity: 7.500 l / h YOM: 1993 Max working pressure: 200 bar Motor: 55 kW Dimensions: 165 cm x 130 cm x 130 cm (Lxwxh) Electric: 380 V / 3 phase / 50 Hz Stages: 1 stage

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1100 mm Width: 600 mm Height: 2100 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Pack carton packages into trays

CROSS-FEED SPLICER Width: 3400 mm

Maximum diameter 660 mm scortecciabile

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 275 rpm up to: 3600 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1100 mm Width: 600 mm Height: 2100 mm Various accessories: Preparation for coolant device Lamp Quick change device Digital readout number of axis:: 2 Motorized table adjustment

Filleting machine for small whitefish Condition: good Working range: small witefish from 30 to 55 cm Capacity: 25-40 fish/min Power consumption: 1,5 kW Water consumption: 15 l/min Dimensions: 3,25 x 1,20 x 1,70 m Weight (net): 810 kg

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Man. year: 1990 Condition: overhauled The Baader 51 is a skinning machine for fillets cut from white fish, blue whiting, halibut and red fish. This machine seizes the skin without initial cut from the tail end, right where the skin begins. This results in a higher yield. Usable width of feed belt: 380 mm The fillets can be placed on the belt optionally side by side. Capacity: 50-160 fillet/min (depends on the fillet size and operator's skill) Power consumprion: 1,5 kW Water consumption: 15 L/min Dimensions: 1980 x 780 x 1130 mm Weight (net): 530 kg

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 /1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number of ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

form9 DP-18-VARIO Bench drilling machine Lxwxh 540 x 390 x 950 mm Table size 240 x 240 mm Table adjustment 45 ° - 0-45 ° Speed 440 â 2580 min-1 Quick clamping drill Chuck, Chuck clamping range / type 1-16 mm Distance from Chuck to table maximum 325 mm Distance from the drill Chuck to the frame base of 495 mm Motor 230-240 V Motor power 550 W Dimensions L x W x H 540 x 390 x 950 mm Weight net / gross 38.5 / 41 kg G & SC-5906807901

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Preparation for coolant device Lamp Quick change device: A-30 Adjustable depth stop Digital readout number of axis:: 2 Motorized table adjustment

1 RAELMA roll packing machine year 1999 working width 280 cm max roll diameter 45 cm entry conveyor rotational packing longitudinal welding 2 x top welding exit conveyor

Used Cup filling machine Brand: Benhil Type: 8204 Capacity: 800-2400 units/hour Max filling: 45ml - 300 ml Cup format: about 95 mm diameter YOM: 1990

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 250 mm Longitudinal travel (X-axis): 330 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 475 mm Spindle speeds: number (steps): 12 from: 63 rpm up to: 2800 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 4 mm/min up to: 500 mm/min vertical from: 2 mm/min up to: 200 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2.5 m/min vertical: 1.0 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.2 HP Machine´s weight about: 950 kg Overall dimensions machine: Length: 1600 mm Width: 1100 mm Height: 1650 mm

We offer you here Bros. Cone winder, at: -Width of the tape: 30 cm -Stainless steel casing machine If you are interested and for more information we are available.

THICKNESS PLANER type CASADEI R 510 second hand machine volt. 380/50 max working width mm. 510 max. working height mm. 250 min. working height mm. 3 maximum removal thickness 10 mm shaft diameter mm. 120 knives n.4 motor power Hp 5,5 weight kgs. 900

Slow runner with sliding floor 800 mm rotor width 11 kw motor

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 600 mm Table width: 210 mm Longitudinal travel (X-axis): 450 mm Transversal travel (y axis): 175 mm Vertical travel (z axis): 400 mm Distance from vertical spindle to table: 320 mm Spindle speeds: number (steps): 9 from: 60 rpm up to: 1200 rpm Taper in spindle: 30 ISO Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 216 mm/min vertical from: 12.0 mm/min up to: 216 mm/min Rapid traverse: longitudinal: 1.0 m/min vertical: 0.5 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 880 kg Overall dimensions machine: Length: 1100 mm Width: 1100 mm Height: 1600 mm

THICKNESS PLANER type SAC SUERI RS 53 S second hand machine CE mark : Yes technical details : useful working width mm. 530 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed by inverter m / min. 4 ÷ 16 motorized table positioning with electronic reading n.4 knives "Tersa" main motor power Hp 5,5 volt. 380/50

THICKNESS PLANER type SCM S 52 SURFACE PLANER type SCM F 410 SPINDLE MOULDER type SCM T 130 NOT SEPARATE SALE second hand machines

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 65 mm Distance between centres: 250 mm Table length: 470 mm Table width: 175 mm Max. grinding diameter: 130 mm Longitudinal way of table: 260 mm Transversal way of the table: 70 mm Vertical adjustment of the table: 50 mm Table swivels: 360 ° Grinding spindle speeds: number (steps): 2 from: 1400 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 1400 mm

SURFACE PLANER CASADEI DS 510 second hand machine volt. 380/50 working width mm. 510 length of table mm. 2800 cutterblock 4 knives motor power Hp 5,5 net weight kgs. 750

GLUE SPREADER type OSAMA S2R 400 . NEW Year 2016 CE : YES Volt. 400 / 50 max. working width mm. 400 max. working height mm.100 n.02 rubber rollers

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 151 Technical data Number of axis total: 3 Spindle nose:: SF 32 Drill capacity in steel: 0.4 - 20 mm Drill capacity in cast-iron: 24 mm Threat cutting in steel M: 1 - 16 Thread cutting in cast-iron M: 18 Milling capacity: 20 cm3/min Spindle stroke: 120 mm Spindle speeds :stepless from: 25 rpm up to: 8000 rpm Table length: 730 mm Table width: 280 mm Distance of the T-slots: 50 mm T-channel width: 10H8 mm Number of T-channels: 4 Height of table above floor: 1160 mm Min. distance from table to spindle: 0-110-560 mm Max. distance from table to spindle: 560 mm Longitudinal travel: 420 mm Transversal travel: 230 mm Vertical travel: 450 mm Feeds: 1 - 8000 mm/min Rapid traverse:: 8 m/min Table load max.: 75 kg Voltage 50 Hz 3x: 380 Volt Power: 5.8 kW Total power required: 15 kVA Machi ...

The STOCK LM 1235 / 1250P litho laminating machine was manufactured in 1995 by the German company Stock Maschinenbau GmbH. The laminator is used for wrapping cardboard with thin paper in order to obtain a decorative, aesthetic packaging. Labels with a format (length x height) of 250 x 250 mm are glued on cardboard sheets with a maximum width of 1250 mm and a length of 1235 mm. The LM 1235-1250P litho laminating machine is equipped with: pressure roller, sensor for detecting and registering the stuck label, or the gluing unit with automatic glue supply. Technical data of the STOCK LM 1235.1250P litho laminating machine - lamination length: 1235 mm - laminating width: 1250 mm - label format (length x height): 250 x 250 mm - semi-automatic machine with a label dispenser - manual label feeding table - single sheet - gluing unit with automatic glue supply - sensor for detecting and  ...

Railway film 420 mm Preferential 600mm Fresh meat machine

BENDING ROLLERS FUR RING BENDING MACHINE See picture for more info! DUTCHMACH 90m78mjok Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 410 mm Square: 410 mm hydraulic Automatic Cutting speed: stepless from: 10 m/min up to: 100 m/min Table inclination right side: 60 ° Roll diameter: 450 mm Band length: 5300 mm Band width: 34 mm Sheet thickness: 1.1 mm Vice pressure max.: 3 - 25 bar Voltage 50 Hz 3x: 380 Volt Saw motor driving power: 2.2 kW Machine´s weight about: 2300 kg Overall dimensions machine: Length: 3250 mm Width: 1910 mm Height: 2100 mm

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 355 Technical data Number of axis total: 4 Spindle nose:: SF 32 Drill capacity in steel: 0.4 - 20 mm Drill capacity in cast-iron: 24 mm Threat cutting in steel M: 1 - 16 Thread cutting in cast-iron M: 18 Milling capacity: 20 cm3/min Spindle stroke: 120 mm Spindle speeds :stepless from: 50 rpm up to: 9000 rpm Table length: 730 mm Table width: 280 mm Distance of the T-slots: 50 mm T-channel width: 12H8 mm Height of table above floor: 1080 mm Min. distance from table to spindle: 0-110-560 mm Longitudinal travel: 420 mm Transversal travel: 240 mm Vertical travel: 450 mm Feeds: 1-7200 mm/min Rapid traverse:: 7.2 m/min Table load max.: 75 kg Voltage 50 Hz 3x: 380 Volt Spindle power: 5 kW Total power required: 10 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: ...

The Prima Power Platino 1530HS laser was produced in 2006 by the Italian company Prima Industrie S.p.A. The 4 kW laser is equipped with a Primach 20L CNC control. The machine is used for cutting metal sheets with a thickness of 20 mm (black steel), 12 mm (stainless steel) and 8 mm (aluminum). The laser has an independent F axis with programmable focus position and nozzle distance. The maximum feeds in the X / Y / Z / F axes are respectively: 3050 mm, 1525 mm, 150 mm and 25 mm. The machine is equipped with: a Prima Power Convergent Lasers Division CX 3000 resonator with a power range from 200 to 3000 W and a cooling unit. In addition, the price of the laser also includes 3 cylinder regulators made of chrome-plated brass with a stainless steel diaphragm in the first stage of reduction and a bellows structure in the second stage of reduction, and 2 cylinder regulators for oxygen and nitroge ...

Electric spindle press REITZ EHSP100F as laboratory heating press / demonstration machine Laboratory heating press with pressing pressure 40 KN (4 tons), ratio 1 : 16, spindle diameter 45 mm, pitch 8 mm, spindle stroke 0.5 mm per revolution. Gear motor 0.75 KW, 1,500 rpm, 4-pole, with spur gear i = 1:5, Speed 150 mm / min. Max dynamic load 25 kN. With reversible control, emergency stop and motor protection plug. Total weight approx. 100 kg, table surface 600 600 mm, pressing surface approx. 150 250 mm, clear height approx. 60 mm. Base made of high-quality aluminium profiles 4545 mm, the table top is made of glued plywood top. The laboratory heating press has 40 kN pressing pressure (dynamic load). The spindle is self-locking and thus maintains the pressing force for a longer period of time. For an extra charge with heating plate, insulating plate and temperatur ...