one used for sale

There is one large and one small shuttle available, suitable for transporting pallets and storage boxes, with loading device and documentation, an on-site inspection is possible.

There are three Push-Pull Attachments Meyer 1-2503 N, one Implement/ Box Clamp Cascade 20D-CC-X07J and one Multiple-Pallet Tine Adjuster Durwen DPK 30B available, all attachments are only conditionally serviceable as they have not been in use for some time, all items would need to be checked.

weight max.: 20 t workpiece diameter: 300 - 3600 mm Turning speed: 70 - 1200 mm/min roll diameter: 350 mm Wheel width: 110/175 mm total power requirement: 3 kW weight of the machine ca.: t dimensions of the machine ca.: 2,5 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Four-sided planer WEINIG PROFIMAT 22N. No 4 –DTR – German production – year of manufacture 1988 – adjustable heads TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) bottom head 5.5 kW 2) head of the law 3) left head 7.5 kW 4) top head 7.5 kW feed engine 2.2 kW feed speed 6 – 20 m/min four steel top pulling rollers one upper rubber pulling roller one pulling roller in the countertop feed on cardan shafts electric height adjustment pre-table top length 1975 mm central lubrication pneumatic clamps dimensions of the machine (length / width / height) 350 / 200 / 170 cm weight ~ 1800 kg

1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)

If you are planning to exchange your old Vacuumatic Cuti 1 for a younger one, you should not miss this bargain. We have 4 unused Cuti 2 from 2021 on offer, all accessories such as stand, sensor or interface cable can be taken over. If you're planning to swap out your old Vacuumatic Cuti 1 for a younger one, don't miss out on this bargain. We have 4 unused Cuti 2 from year 2021 on offer, all accessories such as stand, sensor or interface cable can be taken over.

diameter: -- mm workpiece length: -- mm work piece width: 12 mm range of angles: 30/45/22,5/37,5/50 ° weight of the machine ca.: 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kit  ...

0: 18 St. Depth: 800 mm Length: 2300 mm Height: 1500 mm weight: 90 kg Profile trolley RU-PW1SH One-sided for wooden profiles ------------------------------- Vertical storage and transport of cut wooden profiles Furnishing: -Easy loading and unloading - Sorting combs covered with PVC tube, -Set-up area as a plan board or bar grid floor -Available on one and two sides -Compartment bracket and clamping plate available separately -Mobile on 4 polyamide swivel castors, 2 of which have brakes Technical specifications : RU-PW-1SH 18/100 Length 2,300mm Width 800mm Plant part height 1500 mm subjects 18 Compartment width 100 mm (adjustable) Compartment depth 400 mm Weight 90kg Installation surface made of planboard. With 4 plastic Swivel castors, Ø 150 mm, 2 of which have brakes. ------------------------------- Price ex works plus shipping and packaging: on request ------------------------------- ...

heavy duty lathe with 3 guides with conical ruler rapid movement of cross-slide one steady of 710 mm one steady of 420 mm 4 claw chuck dia 420 mm Distance between centers: 5100 mm Swing over bed: 1200 mm Swing over cross-slide: 880 mm Swing in gap: 1650 mm (400 mm long) Diametre of main spindle bore: 130 mm Number of speeds: 7 > 700 rpm Digital screen: Fagor 1 axis Weight: 13 ton Steady(s) (fixed): 2 steadies

diameter: -- mm workpiece length: -- mm work piece width: 15 mm range of angles: 15-50 ° plate thickness: 6-40 mm total power requirement: 1,5 kW Feed speed: 3,5 m/min. dimensions: 530 x 395 x 860 mm weight of the machine ca.: 94 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from a ...

Weinig Powermat 500 four-sided planer - year of manufacture 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool mounting TECHNICAL PARAMETERS: planing width 300 mm planing height 200 mm PowerLock tool mount PowerCom control with upper and left spindle positioning 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1,5 kW 12000 rpm spindle speed 8000 rpm infinitely adjustable feed rate 6-36 m/min feed motor power 4kW five upper steel pulling rollers one rubber top pulling roller one roller in the countertop pulling airbag in the table automatic central lubrication of the table Automatic lubrication of spindle guides Serving table length 1970 mm nozzle diameter 2x140 mm 3 x 160 mm 1 x 80 mm total power 70 kW 140 A Machine dimensions 500x225x ...

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sander --------------------------------- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full tr ...

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5600x1350x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one  ...

Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center hole ...

: 4,0 mm : 3,0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - 2x staking stops with movable and interchangeable stop bars - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30°left and once on the right. - the swivel adjustment becomes pneumatic,  ...

Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...

Four-side planer Weinig Unimat 23E cutting out the glazing bead - German production - year of production 2002 - total power 32 kW - pneumatic stroke of the spindles for cutting the glazing bead - 3866 mth TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - spindle diameter 40 mm - electronic height and width adjustment - the possibility of programming fixed dimensions 1 lower spindle 4 kW 2 left spindle 3 right spindle 7.5 kW 4 right spindle 5.5 kW 5 top spindle 5.5 kW 6 lower spindle 4 kW - power of the feed motor 3 kW - feed speed 5-24 m/min - length of the pre-table 2480 mm - electric brakes - seven upper steel pulling rollers - one upper rubber pulling roller - one roller in the top pulling - air cushion in the countertop - pneumatic pressure - feed on cardan shafts - diameter of connections 140 mm TRANSPORT SIZE 470x220x240 cm  ...

Code: 0743 Brand: MASTERWOOD - ITALY Model: SPEEDY 207 - CE Standard Numerical control point to point boring machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes - CE Standard Boring head with 5 vertical and 1 double horizontal independent chucks - Spindles rotation rpm 4500 Saw for longitudinal cuts - Saw rotation rpm 6000 Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Vertical pneumatic tool displacement mm 60 Max panel thickness mm 50 Vacuum pump 16 m3/h for panel clamping Vacuum cup diameter mm 80 Clamping cylinders for narrow workpieces against fixed rear stops Multitasking control complete with interactive graphic programming,  ...

Solvent-base & water-base combi laminating machine Max. coating width 1.100 mm Mechanical speed 450 m/1' Working speed up to 400 m/1' Roll diameter of the main unwinder 1.000 mm Roll diameter of the secondary unwinder 1.000 mm Reel diameter of the rewinder 1.000 mm Inner diameter of the main roller cores 152 mm Inner diameter of the secondary cores 152 mm Inner diameter of reel cores 152 mm Max. reel weight of the main reel 1.200 kg Max. roll weight of secondary unwinder 1.200 kg Max. reel weight of the rewinder 1.200 kg Tape tension range main unwinder 2 – 40 kg Tape tension range secondary unwinder 2 – 40 kg Tape tension range of the rewinder 2 – 40 kg Max. temperature in the dryer at a room temperature of 20°C 120°C Solventless lamination with one-component adhesive trolley cart with 4 solventl ...

Overview Most of the equipment, which belongs to this brewery, was manufactured in 2021 and 2022. There are several components which have never been used. The owner had purchased all the equipment to set up a micro brewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore all the equipment is for sale. List of components Manufacturer: Bühler AG Machine Type: malt mill Model: Smartgrist YOM: 2022 (used since February)   Manufacturer: Spadoni Machine Type: 25 hl brew house Model: RMB 2500 YOM: 2022 (not used yet) Capacity: 25 - 30 hl in one brewing process, two processes possible in ten hours   Manufacturer: ABC Perello Machine Type: steam generator Model: PMY - 12 YOM: 2022 (not used yet) Capacity: 1250 Kgv/h   Manufacturer: --- Machine Type: water softener Model: --- YOM: 2022 (used since January)   Manufacturer: Isma S.A. Machine ...

two-pedal foot switch with protective cover WMW one NC and one NO per pedal used, tested ! Dimensions: 315 x 210 x 135 mm

Shut-off valve, 3 pieces ARI 1x PN 16 DN 50 Installation dimensions: 230 mm Flange diameter: Ø 100 / 165 mm bolt circle diameter: Ø 125 mm hole diameter: Ø 17,5 mm Handwheel: Ø 125 mm 2x PN 16 DN 15 Installation dimensions: 130 mm Flange diameter: Ø 45 / 95 mm bolt circle diameter: Ø 65 mm hole diameter: Ø 13.5 mm handwheel: Ø 100 mm material valve body: cast steel ( GG25 ) New, retail sale possible dimensions ( one valve PN 16 DN 50 ): 320 x 230 x 165 mm dimensions ( one valve PN 16 DN 15 ): 245 x 130 x 100 mm

carrying capacity: 1000 kg number of suction cups: 8 suction cup dia.: 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device ne ...

carrying capacity: 250 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...

Suitable for fully automatic grinding of all known tooth geometries (e.g. flat, alternating, trapezoidal tooth) from HM – circular saw blades on the face and back in one clamping. The free programming also allows the Machining of special tooth shapes. Accesories: Pallet loader with 3 stations,, Coolant system with total enclosure,, Integrated hollow tooth grinding device,, Software package W 1 alternate tooth,, Software package W 2 flat tooth,, Software package W 3 flat/trapezoidal tooth (with tooth height difference),, Software package W 4 flat / roof tooth (with tooth height difference),, Software package W 5 trapezoidal tooth,, Software package W 6 pointed on one side,, Software package W 7 tooth face processing,,, Software package W 8 free programming of special tooth forms,, automatic tool positioning axis, Automatic D-axis for machining chip breaker grooves, auto. fire extinguish ...

Two-hand control, command generator ROBOTRON type 54854035 3x controls 6x switching element / switching insert A31 TGL33573 one NC and one NO per switching element Switching capacity: 380 V AC 6 A used, tested ! Dimensions: 140 x 100 x 85 mm

Command generator CONTROL DEVICES Leipzig Type 334 ELN 13633911 1x control element 1x signal light, color: green < br /> 1x switching element / switching element A31 TGL33573 one NC and one NO per switching element Switching capacity: 380 V AC 6 A IP40 used, tested ! Dimensions: 120 x 100 x 100 mm

Command generator CONTROL DEVICES Leipzig Type 334 ELN 13633911 1x control element 1x signal light, color: blue < br /> 2x switching element / switching insert A31 TGL33573 one NC and one NO per switching element Switching capacity: 380 V AC 6 A IP40 used, tested ! Dimensions: 120 x 100 x 100 mm

Position switch, safety position switch, with roller lever SIEMENS 3SE3 120-1J ( 3SE3120-1j ) one normally open / one NC max. 500 V max. 10 A used, tested ! Dimensions: 125 x 40 x 63 mm

Safety switch with separate actuator, 2 pcs SCHMERSAL 1x AZ 16 zvk-M16 one NC, one NO 1x AZ 15 zvr NO IP67 4 actuator new, with documents ! Dimensions ( AZ 16 zvk ): 90 x 52 x 13 mm Dimensions ( AZ 15 zvr ): 75 x 52 x 13 mm Dimensions ( packaging ): 100 x 60 x 40 mm

Command generator ROBOTRON Type 50838019 1x control element 2x switching element / switching insert B31 TGL33573 one NC and one NO per switching element Switching capacity: 380 V AC 6 A IP40 Housing- Dimensions: 100 x 55 x 75 mm New, with documents ! Dimensions: 100 x 55 x 85 mm

Command device, push button, with optical display PAGUS Emergency stop 2x Switching element: SIEMENS 3SB3400-0a Switching capacity: 230 V AC, 6 A one NC / one NO each 1x Display element: SIEMENS 3SB3400-1G Operating voltage: 6 - 230 V AC / DC wall enclosure: RITTAL KL1502 Dimensions: 200 x 200 x 120 mm used, tested ! Dimensions ( packaging ): 220 x 200 x 170 mm

Control device, push button, lockable EAW, ELECTRICAL SWITCHGEAR DRESDEN HT31-2 E403/F 32.03-1/2 Switching element: ME2E0 Switching capacity: 500 V AC, 6 A one NC / one NO Housing material: corrosion-resistant light alloy casting, painted explosion-proof ! New, with documents ! Dimensions: 105 x 81 x 165 mm

Control device, push button, lockable EAW, ELECTRICAL SWITCHGEAR DRESDEN HT31-2 E403/F 02.136/1 Switching element: ME2E0 Switching capacity: 500 V AC, 6 A one NC / one NO contact housing material: corrosion-resistant light alloy casting, painted explosion-proof !; New, with documents ! Dimensions: 105 x 81 x 150 mm

Rider safety element, with contact protection cover, 7 pieces RITTAL SV3418.010 400 V AC 50 / 60 Hz 63 A 7x Protection cover: SV3418.020 New ! Dimensions ( one fuse element ): 210 x 27 x 50 mm Dimensions ( one anti-contact cover ): 210 x 27 x 18 mm Dimensions ( packaging ): 305 x 220 x 80 mm

Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Transnorm conveyor belt GF 8940-600-500 RA2051 Technical data: Conveyor length (NL): 8940 mm (4050 mm + 4890 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor and overdrive from belt one to belt two Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 8940 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine typ ...

used rack ovens Miwe Rollin e + RI 1.0610-TXXL from year 2020, 2019 and 2017 immediately available in stock for sale. Two pieces are from 2020, one piece from 2019 and one from 2017. The stoves are equipped with oil burners. -Miwe Rollin e+ -Type: RI 1.0610-TXXL -Sheet size 58x98cm -Fuel: Fuel oil -with exhaust hood including fan -with ramp -Door hinge on the right -with Miwe TC control -400/230 V 3/N/PE

Stikkenofen Miwe Rollin eplus 1.0610 TXXL Year: 2017 used rack ovens Miwe Rollin e + RI 1.0610-TXXL from year 2020, 2019 and 2017 immediately available in stock for sale. Two pieces are from 2020, one from 2019 and one from 2017. 2x year of construction 2020 1x Year of construction 2019 1x Year of construction 2017 -Miwe Rollin eplus -Type: RI 1.0610-TXXL -Sheet size 58x98cm -Fuel: Fuel oil -with exhaust hood including fan -with ramp -Door hinge on the right -with Miwe TC control -400/230 V 3/N/PE

ABG Omega SR 410 from 2010 with 2 flexo printing units 2 diecutters with one GapMaster from Kocher & Beck Manufacturer: AB Graphics Type: SR 410 Year of production: 2010 Flexo printing units: 2 units Rotary die cutting untis: 2 GapMaster: Yes one of the die cutters is Gapmaster Turning bar: Yes Nip rollers: Yes UV System: GEW Please contact us for more information or pricing. Machine is available immediately

CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure,, Software path management,, Software end mill (207/208),, Software disc-shaped workpieces on the front side (221/222/223/224),, Software profiled workpieces (233/234/239/240),, Software hogger, hogger profiled (255/256/257/258/260/261/262/263), Software for disc-shaped workpieces (264/265),, Software for end and joint milling cutters (267/268/277/278),, Software step tools (271),, Software scoring saws (299),, Software saws flat tooth (301), Software saws one sided with bevel (302/303),, Software saws alternating teeth (304),, Software saws trapezoid trapezoid tooth (309),, Software saws flat roof tooth (310),, Software saws flat-tra ...

Interroll roller conveyor falling conveyor 1470-2155-490-420 RA1981 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: selectable between 1470 mm and 2155 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: no drive Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website

Interroll roller conveyor falling conveyor 720-490-420 RA1982 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: 720 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: Interroll Drum motor Conveying speed: Freely adjustable with Interrroll controller Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 0 boring of olive 1=yes, 0=no: 1 0 length: 2600 mm width: 800 mm height: 1.250 mm Hess corner bearing and olive drilling machine ---------------------------------- - Stable base frame as a support wall - precise support made of abrasion-resistant and dimensionally stable plastic for frames and sashes up to 100 mm thick - Corner bearing and olive drilling in one machine and in one Drilling unit - easy and comfortable vertical work - easy handling - no templates, minimal Time required for safe workpiece positioning, Guarantee for exact and precise holes - 2 clamping cylinders for immovable fixation of sashes or frame adjustable to different wood thicknesses - Lateral stop in the rebate for the corner bearings - Ergonomically arranged stop system for olive drilling with 14 hinged stops and additional color markings ...

• For banding bottles or folding boxes • 90° infeed • Grouping by translator • Bottle infeed with 2 screws (adjustable to each other) for shaped bottles, grouped from single infeed lengthwise to 6x crosswise • With 2 format screws for shaped bottles 63.5 x 32.5 x 108 mm and 67 x 38.5 x 114 mm • Folding box infeed conveyor • Translator with one gripper each for bottle and one suction plate for folding boxes • for PE film • film width 30 - 450 mm • film thickness 0,025 - 0,1 mm • Roll diam. max. 320 mm • Output max. 50 cycles/min (packs/min), format/product-dependent • Format range product 30-100 x 30-100 x 60-250 mm [L x W x H] / pack 30-300 x 60-380 x 60-250 mm [L x W x H]. • Film splicer for automatic film change without machine stop • Machine control Siemens S7-300 • Control system drives Schneider PacDrive 3 • 400V/50Hz/22kW/31,4A

BODOR P3015 fibre laser cutting machine was built in 2020. The machine designed for even the most demanding challenges is equipped with state-of-the-art technology, guaranteeing excellent cutting quality at low operating costs. During the performed process, the robust structure with welded bed frame achieves excellent mechanical properties as well as high stability and rigidity. Sheet metal made of e.g. aluminium, brass and stainless steel is machined by a cutting head with many useful functions. One of these features is Auto Focus, which automatically adjusts the focal position to compensate for errors or failures. Furthermore, the cutting head is able to detect protruding obstacles, which can cause damage and high maintenance costs. The nozzle is changed by the P3015 fibre laser fully automatically in a very short time. The BODOR fiber laser is equipped with the intelligent Bodor ...

The equipment presented is a weighing line equipped with a weighing machine type VPV45 Duo, it is composed of the following elements: - An elevator belt type goose neck type - An oscillating feed belt - One WEIGMA multihead weigher with double head vibrating lane 2 VPV45 (two channels) - A screened enclosure, with a wicket door access - A touch keyboard to program the weigher - A remote control panel - A remote emergency stop box - A double chute goes up and down - A supply item such as tray - A step-by-step conveyor belt - An electrical cabinet - A checkout support trolley The machine was used very little. Documentation, certificate of conformity, food certification available. The weight range of the weigher is from 10 gr. to 2000 g. The scale is designed for homogeneous size products with a maximum length of 55 mm. The weigher can reach approx 25 weights per minut ...

Key data: 2500 mm, 1000 mm, 80 mm

Weeke BHX 500 with hedgehog buffer in the inlet Hedgehog buffer with 30 buffer places, length overall: 5700 mm Effective width: 2000 mm Manually movable Weeke machining center with one machining support at the top and one at the bottom Insertion table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS min. workpiece length: 200 mm max. workpiece length: 2500 mm min. workpiece width: 70 mm max. workpiece width: 1000 mm min. workpiece thickness: 4 mm max. workpiece thickness: 80 mm max. workpiece stacking: 2 pcs. Machine Configuration: 2V32 HIGH SPEED 7500 Vertical drilling unit arranged in the upper and lower machining support, each with 32 drilling spindles (individually controllable with variable speed range). 2H8X/2Y Horizontal drilling unit arranged in the upper and lower processing support with 10 over Drill spindles can be called up individu ...

Used piston press with a capacity of 5000 L / h. Manufacturer Zamet Poland. 2 pieces available. After renovation in 2014, one piece was unused and the other one was used only slightly.