british flag
Resale Logo

ona used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machines and plants for waste disposal and recycling  Hauck GmbH  http://www.hauck-entsorgungslogistik.de 
banner logo
start page > keywords ona > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
126392698 107

VIETZ EV-100 for sale
Tube Bending Machines


Pipe bending machine pressure force: 50 ton bending range: 2 "-8" Power: 2 .2kW Length: 210cm Width: 120cm Height 100cm Weight: 1100kg With tools Good condition fully functional can be visited on site  ...
used machine
 
Pipe bending machine pressure force: 50 ton bending range: 2 "-8"
Power: 2 .2kW
Length: 210cm
Width: 120cm
Height 100cm
Weight: 1100kg
With tools

Good condition fully functional can be visited on site and tried out.
Shipping abroad.

Visit:

Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity.
For general questions or an appointment for a visit I am at the below telephone number, available.

Errors in the description and intermediate sale is reserved.

The VAT is shown separately on my bills.

Shipping with freight forwarding.
1991
Price  
    request
126406164 109

DARDI INTERNATIONAL CORPORATION Powerjet 1530 for sale
Water cutter Techjet Powerjet 1530


2016
76,750 EU?  
  PL   request
126392690 702

BONGARD ESMACH FFBT for sale


Bongard Esmach moulder In a very good working condition - With Teflon coated cylinders - With new belts - Computerized control panel - On wheels

 
Bongard Esmach moulder
In a very good working condition
- With Teflon coated cylinders
- With new belts
- Computerized control panel
- On wheels
 
5,500   
  GR   request
126398082 702

Spiralkneter for sale
spiral-mixer for catering, hobby or amateur baker


sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional w ...

 
sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional with removable bowl)\r\nchain drive, self-oiling step-down-gear
 
Price  
    request
126392689 702

RAM DSS10/20 for sale
Dough dividing machines


RAM hydraulic divider DSS 10/20 In a very good working condition - With extra cutting system for baguettes - With extra system to select for cutting double pieces - 10 pieces 10 x 20 cm 300-1600 gr , ...

 
RAM hydraulic divider DSS 10/20

In a very good working condition

- With extra cutting system for baguettes
- With extra system to select for cutting double pieces
- 10 pieces 10 x 20 cm 300-1600 gr , or 20 pieces 10 x 10 cm 150 – 800 grs
- Bowl capacity 16 kgs
- Bowl dimensions 40 x 50 cm
- On wheels
 
3,500   
  GR   request
126398170 702

DIOSNA Spiralkneter, Disona, max. 80 kg Teig for sale
spiralmixer, fabr. Diosna, type SP 80 D max. 80 k


 
Price  
    request
126374261 1403

MODELL STB-R for sale
Packing table desk


Packing table model tr-R Professional packing table in ergonomic thought-out construction Everything at your fingertips, tidy and efficient. A cheap investment for the future packing table comprising: 1 Basic m ...

 
Packing table model tr-R

Professional packing table in ergonomic thought-out construction
Everything at your fingertips, tidy and efficient.

A cheap investment for the future packing table comprising:

1 Basic module Pack - and work table W x D x H = 1,800 x 810 x 845 mm
1 shelf above countertop 1,420 x 350 mm
1 construction magazine top with 5 dividers for cardboard 1,610 x 480 mm
1 pull-out drawer
1 workstation lamp mounted under shelf

Optional: lower shelf as an roller containers
W x D x H = 1230 x 600 x 445 mm

Color: White used, but good condition table and accessories

16 packing tables available

Total price per complete unit as described above, without lower shelf: â?¬560,00 Excl. VAT

Price with lower shelf: â?¬680,00 plus VAT.
 
560 €  
    request
126388260 102

KAMI DKM 1000.3C - 1 for sale
lathe-conventional-electronic


turning length: 3000 mmturning diameter over bed: 1000 mmturning diameter over slide rest: 705 mmturning diameter in the gap: 1.240 mmspindle bore: 120,0 mmturning speeds: 14 - 857 U/min3-jaw chuck: 400 mmquill:: 6 MKqui ...
used machine
 
turning length: 3000 mm
turning diameter over bed: 1000 mm
turning diameter over slide rest: 705 mm
turning diameter in the gap: 1.240 mm
spindle bore: 120,0 mm
turning speeds: 14 - 857 U/min
3-jaw chuck: 400 mm
quill:: 6 MK
quill travel: 205 mm
spindle nose: D 1-15/MK 6 Comlock
engine output: 11,0 kW
weight: 6.200 kg
range L-W-H: 5.400x1.820x1.800 mm



This ad was created with MODUL MWS - the software solution of LogoTech.
2010
Price  
    request
126374257 101

KOLB NKR 50/2500 for sale
Column Radial Drilling Machine


Drilling capacity steel/ cast iron: 55/ 70mm, max. jib length: 2500mm, rotational speed: 34-1500/min, feed rate: 0.07-3mm/U, weight: 8t.
used machine
 
Drilling capacity steel/ cast iron: 55/ 70mm, max. jib length: 2500mm, rotational speed: 34-1500/min, feed rate: 0.07-3mm/U, weight: 8t.
1970
Price  
  DE   request
126388206 102

GEMINIS GT5 ? G2 1100 x 4000 for sale
CNC Lathe


Weight approx.: 15000 kgturning diameter: 1100 mmcontrol: Fagor 8055 TC / C turning length: 4000 mmDimensions (l x w x h) approx.: 5830 x 3350 x 2700 mmnumber of places for driven tools: 0 number of controlled axles: 2  ...
used machine
 
Weight approx.: 15000 kg
turning diameter: 1100 mm
control: Fagor 8055 TC / C
turning length: 4000 mm
Dimensions (l x w x h) approx.: 5830 x 3350 x 2700 mm
number of places for driven tools: 0
number of controlled axles: 2
toolchanger positions: 8
turning speed range: 150-300-600-1200 rpm
rapid travel range: 8 m/min
longitudinal slide -travel: 4280 mm
cross slide - travel: 550 mm
spindle bore: 104 mm
feed range: 625 / 500 mm/r
Description: CNC controlled Heavy Duty Lathe by GEMINIS GT5 G2-1100 x 4000

Control: by FAGOR 8055 TC / C

Maximum machining 1100 mm in diameter and 4000 mm in length

- Sauter turret with 8 positions
- Center height from flat guide: 615 mm
- Distance between centers: 4 m
- Longitudinal travel: 4280 mm
- Cross travel: 550 mm

- Diameter of the main spindle bore: 104 mm
- Main spindle nose: DIN 55026-11
- Rapid traverse adjustment of the longitudinal slide: 8 m / min
- Rapid traverse adjustment of the cross slide: 8 m / min
- Working feed lengthwise: up to 8000 mm / min
- Working feed transverse: up to 8000 mm / min
- Main engine: 30 kW
- Incl. Röhm lathe chuck 630 mm diameter and chip conveyor + Coolant tank 700 liters (1 bar)

Additional accessories: Leveling feet, clamping jaws, documentation, further details see pictures and PDF
2011
Price  
  DE   request
126374251 203

SOCOMEC PS 630 for sale
Thicknessing machines


Description: They offer here on a super functional Planer / Thicknesser, the premium brand of Socomec. It is in good condition. There are small traces of use. The machine is fully operational. This machine provides yo ...
used machine
 
Description:

They offer here on a super functional Planer / Thicknesser, the premium brand of Socomec. It is in good condition. There are small traces of use. The machine is fully operational. This machine provides you with a precise and accurate woodworking.

Technical data:

Brand: Socomec

Type: PS 630

Year: 2009

Table sliding rollers 2 PCs adjustable.
Limb pressure bar
Steel / feed roller
Feed 7, 11, 15, 19 m/min stepless
Number blades 4 PCs.
automatic motor brake
Blades: quick change system
electrical height adjustment with knob fine adjustment
Sound insulation
Suction connection D 160 mm
Weight approx. 800 kg
2009
6,900 €  
    request
126370839 101

SCHARMANN FB 100 A for sale
Boring Mill


Weight approx.: 15000 kgDimensions (l x w x h) approx.: 4840 x 2700 x 2800 mmDescription: Conventional table boring mill 3-axis digital display spindle diameter: 100 mm X-axis 1,200 mm Y-axis 1,000 mm Z-axis 1,800 W-axis ...

 
Weight approx.: 15000 kg
Dimensions (l x w x h) approx.: 4840 x 2700 x 2800 mm
Description: Conventional table boring mill 3-axis digital display spindle diameter: 100 mm X-axis 1,200 mm Y-axis 1,000 mm Z-axis 1,800 W-axis 600, speed: max. 1,500 table load: 5,000 kg table size: 1,200 x 1,000 mm rotary table, facing slide L: 484 cm / W: 270 cm / H: 280 cm, weight approx. 15 to
 
used machinery auction RESALE 5,300 €  
  DE   request
126374240 102

MAZAK Quick Turn 28 N for sale
CNC Lathe


X-travel: 200mm, z-travel: 1020mm, max. swing: 510mm, turning diameter: 320mm, turning length: 1010mm, rotational speed: 30-3000/min, number of tool slots: 8, outer tool dimensions: 25x25x150mm, max. inner tool dimension ...
used machine
 
X-travel: 200mm, z-travel: 1020mm, max. swing: 510mm, turning diameter: 320mm, turning length: 1010mm, rotational speed: 30-3000/min, number of tool slots: 8, outer tool dimensions: 25x25x150mm, max. inner tool dimensions: 50mm, rapid traverse x-/ z-travel: 18/ 24m/min, feed rate: 0.001-999.999mm/U, quill stroke: 130mm, chuck diameter: 250mm, controls: MAZATROL T32-2, including chip conveyor.
1990
Price  
  DE   request
126370841 103

MAHO MH 600 P for sale
Conventional Milling Machine


Weight approx.: 2500 kgDimensions (l x w x h) approx.: 2360 x 2600 x 1852 mmDescription: Work area: adjustment of the cross support - X-axis 500 mm - Y-axis 400 mm, headstock adjustment - Z-axis 400 mm Working space: - c ...
used machine
 
Weight approx.: 2500 kg
Dimensions (l x w x h) approx.: 2360 x 2600 x 1852 mm
Description: Work area: adjustment of the cross support - X-axis 500 mm - Y-axis 400 mm, headstock adjustment - Z-axis 400 mm Working space: - clamping area 245 x 1044 mm - number of T-slots: 3 - distance between T-slots: 45 mm - tool holder ISO 40 - sleeve stroke of the horizontal and vertical working spindles: 80 mm Speeds and feeds: - working spindle speeds: 50-2500 rpm Feeds: - in X and Z axes: 5-1000 mm/min - on the Y axis: 5-650 mm/min Rapid traverse: - in X and Z axes: 2.4 m/min - in the Y axis: 1.6 m/ min Total connected load of the machine 5.3 kW Weight of the machine approx. 1900 kg Space requirement: - L 2360 mm, - W 2600 mm, - H 1852 mm
1983
used machinery auction RESALE 2,800 €  
  DE   request
126374238 103

DECKEL FP 50 CC/T for sale
Universal Milling and Drilling Machine


X-travel: 1200mm, y-travel: 600mm, z-travel: 500mm, working/ NC-rotary table dimensions: 1600x675/ 800mm, max. working/ NC-rotary table load: 2000/ 1000kg, number/ width/ distance of T-grooves: 10-11/ 14 H7/ 63mm, number ...
used machine
 
X-travel: 1200mm, y-travel: 600mm, z-travel: 500mm, working/ NC-rotary table dimensions: 1600x675/ 800mm, max. working/ NC-rotary table load: 2000/ 1000kg, number/ width/ distance of T-grooves: 10-11/ 14 H7/ 63mm, number of tool slots: 40, control: DECKEL DIALOG 11, including chip conveyor, tool changer and switch to horizontal and vertical machining defective, machine is currently not operational.
1991
Price  
  DE   request
126370878 102

GILDEMEISTER GMX TWIN 500 Linear for sale
CNC Machining and Milling Center


Weight approx.: 22000 kgDimensions (l x w x h) approx.: 13600 x 2530 x 2980 mmDescription: CNC machining and milling center GILDEMEISTER GMX 500 Linear Year of construction 2001 CNC control SIEMENS 840 D Technical Data  ...
used machine
 
Weight approx.: 22000 kg
Dimensions (l x w x h) approx.: 13600 x 2530 x 2980 mm
Description: CNC machining and milling center GILDEMEISTER GMX 500 Linear Year of construction 2001 CNC control SIEMENS 840 D Technical Data max. turning diameter 610 mm max. turning length 1.850 mm travel Y-axis (slide 1) 210 mm travel B axis (slide 1) 240 face travel (slide 1/slide 2) 605/267 mm longitudinal travel (slide 1/slide 2) 1,470/1,440 mm longitudinal travel (slide 3) 1,490 mm spindle bore 118 mm tool spindle speed 4000 1/min speed range stepless 20- 3,200 rpm. torque at the spindle 650/1,080 Nm speed range C-axis 3,200 rpm rapid traverse (slide 1) 46/24 n/min rapid traverse (slide 2) 24/60 m/min total power requirement 130/180 KW weight approx. 18,5 to. space requirement as per AWF card (Lx Wx H) 8,000 x 4,000 x 3,200 mm Equipment main and counter spindle as integrated spindle motor differential pressure clamping for main and counter spindle drive power 69 KW (56 - 40% ED) each separate speed limitation device for power chucks tool magazine 40-fold (additional extension of the tool magazine by a 2nd chain with further 40 positions) three-jaw power chuck with bore and quick-change jaw system FNC 250-72, Forkardt, incl. attachments for main spindle support for counter-spindle spindle flange with MKS holders and rotating tailstock center In-process sensor Marposs blowing air as an alternative to coolant double clamping cylinder adjustable setting force of the counter-spindle for tailstock operation via programming function 11 moving to fixed stop measuring cycles: possibility to measure with a sensor on the C axis The 5-axis simultaneous movement programs the axes: x, y, z, C and B. 4-track bed - roller guides coolant spray gun compact filter unit lnterlit additional coolant pump, 80 bar, for upper tool carrier chip conveyor ethernet interface
2001
used machinery auction RESALE 49,000 €  
  DE   request
126374067 104

ABA FFU 1250-60 for sale
Flat Grinding Machines


ABA | FFU 1250-60 Flat grinding machine Year of construction: 1987 2005 reconditioned . Machine number: 208197 Traverse paths: X - 1,250 mm / Y - 600 mm / Z - 700 mm Table load: kg 1,300 Facilities: Magnetic ...
used machine
 
ABA | FFU 1250-60
Flat grinding machine

Year of construction: 1987
2005 reconditioned .
Machine number: 208197
Traverse paths: X - 1,250 mm / Y - 600 mm / Z - 700 mm
Table load: kg 1,300

Facilities:
Magnetic clamping plate
2 x grinding wheel flanges
Coolant system
Machine actuators
Manual / documentation

Delivery ex location D-96317 Kronach / free loading truck
Delivery immediate / intermediate sales reserved
1987
14,900 €  
    request
126370907 102

GILDEMEISTER GMX TWIN 500 Linear for sale
CNC Machining and Milling Center


Weight approx.: 22000 kgDimensions (l x w x h) approx.: 13600 x 2530 x 2980 mmDescription: CNC machining and milling centre GILDEMEISTER GMX 500 Linear Year of construction 2002 CNC control SIEMENS 840 D Technical Data  ...
used machine
 
Weight approx.: 22000 kg
Dimensions (l x w x h) approx.: 13600 x 2530 x 2980 mm
Description: CNC machining and milling centre GILDEMEISTER GMX 500 Linear Year of construction 2002 CNC control SIEMENS 840 D Technical Data max. turning diameter 610 mm max. turning length 1.850 mm travel Y-axis (slide 1) 210 mm travel B axis (slide 1) 240 face travel (slide 1/slide 2) 605/267 mm longitudinal travel (slide 1/slide 2) 1,470/1,440 mm longitudinal travel (slide 3) 1,490 mm spindle bore 118 mm speed range stepless 20- 3,200 rpm torque at the spindle 650/1,080 Nm speed range C-axis 3,200 rpm rapid traverse (slide 1) 46/24 n/min rapid traverse (slide 2) 24/60 m/min total power requirement 130/180 KW weight approx. 20 to. required space (Lx Wx H) 8,000 x 4,000 x 3,200 mm Equipment main and counter spindle as integrated spindle motor differential pressure clamping for main and counter spindle drive power 69 kW (56 - 40% ED) each bottom tool turret with CAPTO system 12-fold tool magazine 40-fold (additional extension of the tool magazine by a 2nd chain with further 40 positions) three-jaw power chuck for main spindle double clamping cylinder The adjustable setting force of the counter-spindle for tailstock operation is made via the programming function 11 moving to fixed stop measuring cycles: measuring possibility with sensor on C axis The 5-axis simultaneous movement programs the axes: x, y, z, C and B. 4-track bed - roller guides coolant spray gun additional coolant pump, 80 bar, for upper tool carrier chip conveyor ethernet interface
2002
used machinery auction RESALE 49,000 €  
  DE   request
126374061 109

ROVELLA C 43 for sale
Die-Sinking Spark Erosion Machine Tools


ROVELLA · C 43 Jig Control: HEIDENHAIN TNC 406 / ZENIT Year of construction: 2004 Machine number: 4 C 4321896 Traverse paths: X - 400 mm / Y - 300 mm / Z - 250 mm Maximum table load: 700 kg Maximum ...
used machine
 
ROVELLA · C 43
Jig

Control: HEIDENHAIN TNC 406 / ZENIT
Year of construction: 2004
Machine number: 4 C 4321896
Traverse paths: X - 400 mm / Y - 300 mm / Z - 250 mm
Maximum table load: 700 kg
Maximum electrode weight: 70 kg
Maximum workpiece size: 1,140 x 620 x 460 mm
Table size: 700 x 400 mm

Facilities:
C-axis
5 x electrode changer
Water bath
Extinguishing system
HIRSCHMANN Chuck
Software update
Manual / documentation
Machine parameters

Other specifications on request

The machine can be visited by appointment

Delivery ex location D-92348 Berg / free loading truck
Delivery November 2018 / intermediate sales reserved
2004
9,900 €  
    request
126370766 102

GILDEMEISTER GMX TWIN 500 Linear for sale
CNC Machining and Milling Center


Weight approx.: 22000 kgDimensions (l x w x h) approx.: 13600 x 2530 x 2980 mmDescription: CNC machining and milling center GILDEMEISTER GMX 500 Linear Year of construction 2002 CNC control SIEMENS 840 D Technical Data  ...
used machine
 
Weight approx.: 22000 kg
Dimensions (l x w x h) approx.: 13600 x 2530 x 2980 mm
Description: CNC machining and milling center GILDEMEISTER GMX 500 Linear Year of construction 2002 CNC control SIEMENS 840 D Technical Data max. turning diameter 610 mm max. turning length 1.850 mm travel Y-axis (slide 1) 210 mm travel B axis (slide 1) 240 face travel (slide 1/slide 2) 605/267 mm longitudinal travel (slide 1/slide 2) 1,470/1,440 mm longitudinal travel (slide 3) 1,490 mm spindle bore 118 mm speed range stepless 20- 3,200 rpm torque at the spindle 650/1,080 Nm speed range C-axis 3,200 rpm rapid traverse (slide 1) 46/24 n/min rapid traverse (slide 2) 24/60 m/min total power requirement 130/180 KW weight approx. 18,5 to. space requirement as per AWF card (Lx Wx H) 8,000 x 4,000 x 3,200 mm Equipment main and counter spindle as integrated spindle motor differential pressure clamping for main and counter spindle drive power 69KW (56 - 40% ED) each separate speed limitation device for power chucks tool magazine 40-fold (additional extension of the tool magazine by a 2nd chain with further 40 positions) three-jaw power chuck with bore and quick-change jaw system FNC 250-72, Forkardt, incl. attachments for main spindle support for counter-spindle spindle flange with MKS holders and rotating tailstock center In-process sensor Marposs blowing air as an alternative to coolant double clamping cylinder adjustable setting force of the counter-spindle for tailstock operation via programming function 11 move to fixed stop measuring cycles: possibility to measure with a sensor on the C axis The 5-axis simultaneous movement programs the axes: x, y, z, C and B. 4-track bed - roller guides coolant spray gun compact filter unit lnterlit additional coolant pump, 80 bar, for upper tool carrier chip conveyor Ethernet interface
2002
used machinery auction RESALE 49,000 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More ONA models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

CNC Lathe MAZAKQuick Turn 28 N

X-travel: 200mm, z-travel: 1020mm, max. swing: 510mm, turning diameter: 320mm, turning length: 1010mm, rotational speed: 30-3000/min, number of tool slots: 8, outer tool dimensions: 25x25x150mm, max. inner tool dimensions: 50mm, rapid traverse x-/ z-travel: 18/ 24m/min, feed rate: 0.001-999.999mm/U, quill stroke: 130mm, chuck diameter: 250mm, controls: MAZATROL T32-2, including chip conveyor.

Universal Milling and Drilling Machine DECKELFP 50 CC/T

X-travel: 1200mm, y-travel: 600mm, z-travel: 500mm, working/ NC-rotary table dimensions: 1600x675/ 800mm, max. working/ NC-rotary table load: 2000/ 1000kg, number/ width/ distance of T-grooves: 10-11/ 14 H7/ 63mm, number of tool slots: 40, control: DECKEL DIALOG 11, including chip conveyor, tool changer and switch to horizontal and vertical machining defective, machine is currently not operational.

Punching Machines AMCTAN-258

OVERVIEW: Brand: AMC Model: TAN-258 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2009 Production hours: 30000 Location: India Origin country: India GENERAL DATA: Measurements width: 2800 mm Measurements depth: 4700 mm Measurements height: 2200 mm Machine weight: 8000 kg MAIN DRIVE: Punching force: 200 kN Max. sheet thickness: 3 mm CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK MOVEMENT: X-AXIS movement: 1250 mm Y-AXIS movement: 1500 mm MAX MATERIAL THICKNESS: Steel: 5 mm Stainless steel: 1 mm Aluminium: 1 mm TOOLS: No. of stations: 20 No. of index: 2 MEDIA: Main electronic connection: 400 V / 50 Hz Power consumption: 15 kVA ADDITIONAL EQUIPMENT: 1 - 20x Tool 2 - Stabiliser 3 - Compressor

Punching Machines Murata WiedemannC-2500

OVERVIEW: Brand: Murata Wiedemann Model: C-2500 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 1996 Production hours: 52800 Location: India Origin country: Japan GENERAL DATA: Measurements width: 2700 mm Measurements depth: 4700 mm Measurements height: 1900 mm Machine weight: 8900 kg MAIN DRIVE: Punching force: 196 kN Max. sheet thickness: 6 mm CONTROL UNIT: Brand: Fanuc Model: O-P MOVEMENT: X-AXIS movement: 1280 mm Y-AXIS movement: 1250 mm MAX MATERIAL THICKNESS: Steel: 6 mm Stainless steel: 2 mm Aluminium: 4 mm TOOLS: No. of stations: 22 No. of index: 2 MEDIA: Main electronic connection: 440 V / 50 Hz Power consumption: 15 kVA ADDITIONAL EQUIPMENT: 1 - Software 2 - Tools 3 - Stabiliser

Beading Machines ERMAKSANPOWER-BEND PRO

OVERVIEW: Brand: ERMAKSAN Model: POWER-BEND PRO Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2015 Production hours: 74 Location: Turkey Origin country: Turkey GENERAL DATA: Measurements width: 2350 mm Measurements depth: 5150 mm Measurements height: 3000 mm Machine weight: 17000 kg MAIN DRIVE: Pressing force: 2600 kN Bending length: 4100 mm CONTROL UNIT: Brand: ERMAKSAN Model: DELEM ER70 MEDIA: Main electronic connection: 380 V Power consumption: 22 kW ADDITIONAL EQUIPMENT: 1 - Front Support Gauges 2 - 2 Photocell rear guards 3 - 4 backgauge fingers 4 - Motorized crowning 5 - Laser front guards 6 - Bottom tool V openings

CNC Plasma Cutting Machines KOIKEGAMMATEC

OVERVIEW: Brand: KOIKE Model: GAMMATEC Application type: Plasma Cutting Machine type: Plasma Cutting Machine Availability: Immediately Construction year: 2012 Production hours: 1500 Location: Netherlands Origin country: Netherlands GENERAL DATA: Measurements width: 2400 mm Measurements depth: 6000 mm Measurements height: 1600 mm Machine weight: 900 kg MAIN DRIVE: Laser brand: KOIKE Plasma power: 260 A Laser type: Plasma CONTROL UNIT: Brand: KOIKE Model: KATANA MOVEMENT: X-AXIS movement: 2000 mm Y-AXIS movement: 6000 mm Z-AXIS movement: 50 mm WORKPIECE: Workpiece x: 150 mm Workpiece y: 600 mm Workpiece weight: 1800 kg MAX MATERIAL THICKNESS: Steel: 30 mm Stainless steel: 30 mm Aluminium: 30 mm MEDIA: Main electronic connection: 3x 400 V Power consumption: 28 kVA ADDITIONAL EQUIPMENT: 1 - 1x Kjellberg HiFocus 161i Plasma Source 2 - 1x Automatic gas console 3 - 1x Plasma station with SmartLift height control 4 - 2x Quick change torches

CNC Milling Machines HERMLEUWF 900 E

OVERVIEW: Brand: HERMLE Model: UWF 900 E Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1990 Production hours: 40000 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 3740 mm Measurements depth: 3970 mm Measurements height: 2000 mm Machine weight: 2300 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 20-4000 1/min CONTROL UNIT: Brand: Heidenhain Model: TNC 355 MOVEMENT: X-AXIS movement: 600 mm Y-AXIS movement: 400 mm Z-AXIS movement: 420 mm WORKPIECE: Workpiece y: 658 mm MEDIA: Main electronic connection: 380 V / 50 Hz ADDITIONAL EQUIPMENT: 1 - NC-Rotary Table HOFMANN RNCW-145 with Tailstock

Milling machining centres FeelerBP-1000A

OVERVIEW: Brand: Feeler Model: NBP-1000A Application type: Milling Machine type: Machining Center (Vertical) Availability: Immediately Construction year: 2016 Production hours: 0 Location: Germany Origin country: Taiwan GENERAL DATA: Measurements width: 3180 mm Measurements depth: 2185 mm Machine weight: 7000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 10000 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 828D MOVEMENT: X-AXIS movement: 1000 mm Y-AXIS movement: 610 mm Z-AXIS movement: 600 mm TABLE: Outer length: 1150 mm Outer width: 600 mm TOOLS: Max weight: 8 kg Max tool diameter: 80 mm Max tool length: 300 mm MEDIA: Main electronic connection: 400 V Power consumption: 25 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - Tool magazine (30 station)

Machining Center AUERBACHFBE 1500 HSC

Controls: HEIDENHAIN, spindle defective, including cooling aggregate HYFRA VWK 50/1-S: cooling output: 6150W, max. operational overpressure: 29.5bar, coolant: R 407 c, weight: 180kg.

Combined Heat and Power Plant DML/ MAN

For natural and bio gas, electric power: 120kW, thermal power: 200kW, with motor MAN E 2876 TE, generator LEROY SOMER, new cylinder heads and MOTORTECH components, switchable to two-gas mode and mains parallel operation, including sound protection hood, was overhauled ca. 5.000 operational hours ago.

Combined Heat and Power Plant DIMAG

Power: 30kW, operational hours: ca. 25.000h, with four-cylinder motor MAN, mains parallel operation, including sound protection hood and control cabinets.

Lathes HWACHEONECO-5VN(R), ECO-5VN(L)

There are two machines available: (1) Lathe HWACHEON ECO-5VN(R): X-travel: 400mm, z-travel: 720mm, number of tool slots: 6, max. rotational speed: 3000/min, max. chuck diameter: 400mm, control: FANUC 18-T, length: 3600mm, width: 2300mm (2) Lathe HWACHEON ECO-5VN(L): X-travel: 400mm, z-travel: 710mm, number of tool slots: 6, max. rotational speed: 3000/min, max. chuck diameter: 400mm, control: FANUC 18-T, length: 3600mm, width: 2300mm, both machines including chip conveyor and crane.

Lathes HWACHEONVT 550 L, VT 550 R

There are three machines available: (1) 2x Lathe HWACHEON VT 550L: X-travel machine 1/ 2: 725/ 325mm, z-travel: 780mm, number of tool slots: 12, max. rotational speed: 3000/min, chuck diameter: 21mm, control: FANUC, length: 3000mm, width: 2200mm, including 2x chip conveyor, display of machine 2 was removed (2) 2x Lathe HWACHEON VT 550R: X-travel: 325mm, z-travel: 780mm, number of tool slots: 12, max. rotational speed: 3000/min, chuck diameter: 21mm, control: FANUC, length: 3000mm, width: 2200mm, including chip conveyor.

Punching Machines DURMARP6

PUNÇONADORA SLEEP 1250X30 TON RP6 ROTATION PUNÇONADORA CNC 1250 X RP6 MODEL SLEEP 30 TON ROTATION PUNCH PRES

Further processing machines

Drying TUNNEL/wygrzewaj?cy IR, sturdy, in good condition and fully functional. The exact adjustment of tape speed as well as the ability to set a precise water temperature over the entire surface of the heating system makes it ideal for drying all kinds of products. Specification: Power supply 400V Adjustable belt speed Temperature control Overall dimensions: length 3015 mm width 1115mm height 965mm Working dimensions: belt width 700 mm belt length 3000 mm tunnel length 1800 mm

Channel baling presses PAALPacomat 2s

Max. pressure: 35 tons Year of production: 1981; Control panel 2001 - SIEMENS S5 Supply: 400 V/ 18,5 kW Number of strappings: 4 in horizontal Bale tying: automatic, wire Cross-section of the channel: 700 x 1000 mm Unit pressure: 50 tons/m² Bale weight: to 450 kg Filling inlet: 650 x 1000 mm Weight: ca 8 tons The machine is fully operational and after service.

Robot KUKAKR 100-2 HA

OVERVIEW: Brand: KUKA Model: KR 100-2 HA Application type: Robotics Machine type: Robot Availability: Immediately Construction year: 2009 Production hours: 0 Location: Germany Origin country: Germany The cell consists of 3 KUKA KR 100-2 HA with KRC2 controller. Two robots are equipped with arm extension. The TIG welding robot has 2 additional axes for driving the tilt and turn table. The tilt and turn table has a capacity of approx. 1000 kg. The robots are equipped with KUKA Safe Operation V2.1, Motion Cooperation 2.1 (the two on the linear axis) and Touch Sense 1.2. One of the two robots on the linear axis also has two additional axes for controlling the linear axis and the lathe chuck. The linear axis has a length of 8300 mm. Due to a business change of the company the automation cell has never been used and comes with 0 production hours. The cell can also be customized according to your production needs. ADDITIONAL EQUIPMENT: - One of the robots has a fixed Precitec YW 52 F100/250 LLK welding head with cross-jet. The welding head is equipped with a beam splitter module for connecting a Kappa observation camera. - The other two robots are equipped with Schunk quick couplers SWK210 and one with collision and overload protection OPR 131 and can be equipped with various tools. - Further technical data on request.

Find used machinery dealers in your country