ona edm used for sale

Elektronikmodul MD, Maschinenfabrik Dieburg GmbH A5121-0 6403 30 005121 00 spare part for EDM machine MD PRONTO 5040 ! used, tested ! Dimensions: 262 x 187 x 20 mm

This GF FORM 20 Erosion machine was manufactured in the year 2018 in Switzerland. It is equipped with a GF AC FORM HMI control unit.

This AGIE AGIEMATIC + AGIEPULS 60 HSF erosion machine was made in the year 2000. It is equipped with an Agie control unit. The machine has a table of 600 x 450 mm.

Isolation transformer, three-phase isolating transformer GETRA BV040392 0,0,667 kVA Primary: 3 x 380 V AC Secondary 1: 3 x 19 V AC, 12 A Secondary 2: 2 x 14 V AC, 10 A 50 / 60 Hz spare part for EDM machine MD PRONTO 5040 !, etc. used ! Dimensions: 180 x 95 x 180 mm

Electric air heater KUNO ENGELS GmbH Type W - S Zg. - No. 6403 04 00 spare part for EDM machine MD PRONTO 5040 used, tested ! Dimensions: 485 x 265 x 460 mm

Power supply, power supply SCHROFF type PSM 215 Input: 220 V 1AC, 48 - 62 Hz Output: 2x 15 V DC, 1.0 A spare part for EDM machine MD PRONTO 5040 !, among others! used ! Dimensions ( Power Supply ): 172 x 100 x 60 mm Dimensions ( Power Supply with Front Panel ): 262 x 178 x 60 mm

Head machine Fortuna KMHeducator : Edmund SchröderType : Fortuna KM4 rowsWeight dough 35gr. - 85gr.suitable for wheat, mixed wheat, mixed rye and special doughsBaker's conditionDetails see picture

This SODICK VL 400Q Erosion machine was manufactured in 2017 in Hungary. It has a movement range of X400mm, Y300mm, Z220mm. Its tank Size is 860mm x 690mm and its control type is LN2W SODICK. Contact us anytime for further information.

Electronic module, rack with power supply MD, Maschinenfabrik Dieburg GmbH A8132-0 / A8250-0 6403 04 008132 00 / 6403 04 008250 00 13 slots 3 fan Power supply: PHILIPS, SCHROFF Type PE 21938/00B U Input: 110 / 220 - 230 V 1AC, 450 VA, 47 - 63 Hz Output: 5.0 / 5.0 / 12.0 / -12.0 V DC spare part for EDM machine MD PRONTO 5040 ! used, tested ! Dimensions: 482 x 250 x 364 mm

This MAKINO EU64 Erosion machines machine was manufactured in 1999 in Japan. It is operated through a MAKINO MGW-N control unit. This 5 axis machine can work with a workpiece weight 1500 kg.

This CHARMILLES ROBOFORM 55P Erosion machine was manufactured in the year 2003 in the United States. It has 3 axis and work table size of 495 x 749 mm.

Reversing contactor, reversing load relay SCHALTBAU MÜNCHEN 2x S163G/24V Spare part number Maschinenfabrik Dieburg GmbH : 0497 40 104080 00 Operating voltage ( coil ): 24 V DC 2x Micro button 1620 0432383 spare part for EDM machine MD PRONTO 5040 ! used, tested ! Dimensions: 120 x 130 x 85 mm

This Charmilles Roboform 31 Erosion machine was manufactured in the year 1996 in Switzerland.

This MITSUBISHI FA20SM Erosion machine was manufactured in the year 2006. The machine has a wire diameter of 0.1 to 0.3 mm.

This Sodick VL600Q Erosion machine was manufactured in the year 2017 in Thailand. It is equipped with a SODICK control unit.

This AGIE AGIETRON INTEGRAL 3 EDM Wire Cutting Machine was built in the year 1998. The machine has a table of 800 x 600 mm.

Isolation transformer, three-phase isolating transformer GETRA BV64030400471202/A 8,7 kVA Primary: 3 x 380 V AC Secondary 1: 3 x 86 / 108 / 150 V AC, 5 A Secondary 2: 3 x 45 V AC, 95 A 50 / 60 Hz spare part for EDM machine MD PRONTO 5040 ! used ! Dimensions: 360 x 230 x 370 mm

This AgieCharmilles CUT 20 P Erosion machine was made in 2015 in China.

Servo motor with brake, permanent magnet motor ISOFLUX SERVOMOTORS S.p.A. Type 4412400301 4000 rpm 84 V IP44 Shaft: Ø 12 mm Flange diameter: Ø 83 mm spare part for EDM machine MD PRONTO 5040 !, among others used, tested ! Dimensions: 300 x 120 x 90 mm

This CHARMILLES ROBOFORM 51 Erosion machine was made in 1998. The machine has a table size of 750x500 mm.

This CHARMILLES ROBOFORM 50 Erosion machine was manufactured in the year 1999. The machine has a table size of 500x400 mm. 2 units are available.

Filter cartridge EDM GmbH & Co. KG HY13215 1126940 inner diameter: Ø 48 / 38 mm outer diameter: Ø 95 mm Total lengths: 195 mm Length (filter jacket): 160 mm Filter fineness: 10 μm New ! dimensions ( single filter cartridge ): 195 x 95 x 95 mm Dimensions ( packaging ): 220 x 100 x 100 mm

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lift table flat-form lifting table type TUL 1000 -Load capacity: 1000 kg -Platform: approx. 1350 x 1060 mm -Dimensions retracted: height 75 mm -Dimension extended: height 905 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece -Transport dimensions: 1350/1055/H250 mm -Weight: 221 kg with pallet

This FANUC Robocut α-1iA erosion machine was made in the year 2000 in Japan. It is equipped with a Fanuc Series 18i-W control unit. The machine has a max work table load of 1000 kg.

This JS EDM Wi-200s Erosion machine was manufactured in the year 2018 in Taiwan. It is equipped with a JS EDM control unit and has 5 axis.

Centrifugal pump, water pump MD, Maschinenfabrik Dieburg GmbH pump: NOBORI Connections: G3/4 Motor: SEING Type: ASEC 0,37 kW 2830 rpm 230 / 380 V 3AC spare part for EDM machine MD PRONTO 5040 ! used, tested ! Dimensions: 370 x 165 x 195 mm

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lift table flat-form lifting table type TUL 1000 -Load capacity: 1000 kg -Platform: approx. 1350 x 1060 mm -Dimensions retracted: height 80 mm -Dimension extended: height 895 mm -Lifting time: approx. 13 seconds. -Transport dimensions: 1350/1060/H245 mm -Weight: 229 kg with pallet

This GF Form E600 Erosion machine was manufactured in the year 2018 in China. It is equipped with a GF AC FORM HMI control unit.

This Zimmer+Kreim Genius 700 erosion machine was made in the year 2004 and includes a Chameleon tool changer type B. The measuring machine Vista Carl-Zeiss was made in the year 2003. All machines are connected.

This AGIE CHARMILLES CUT 20 Erosion machine was manufactured in the year 2008. It is equipped with a Charmilles CNC control unit.

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 2x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

This Mitsubishi Electric FA20-VS Erosion Machine from 2006 is a compact machine, operated through a Mitsubishi 64-BIT-CNC Control unit. Aside from its solid condition, the equipment stands out for its 1500-kilogram workpiece weight capacity.

This MITSUBISHI FX20K Wire EDM machine was manufactured in 1999 in Japan. The machine has a table of 1500 x 800mm and a max. workpiece weight of 800kg.

Description: Type : Oil transformer Finish : Hermetic Make : SGB Year of manufacture : 2016 Condition : New Rated Power : 4200 KVA Medium voltage : 22KV +- 2X 2.5% Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Type of cooling : ONAN Gross vehicle weight : 9030 kg Weight of oil : 1940 kg DIALA S4 ZX-I Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

This HITACHI SEIKI 254Y Erosion machine was manufactured in the year 2003 in Japan. The machine has a wire feed rate of 20 to 300 mm/s.

System 3R WorkPalCompact - Pneumatic pallet changer For the automatic change of pallets in chucks on machine tables of milling machines, wire EDM machines, laser machines or grinding machines.Specification - currently configured for 12-pallet System 3R MacroMagnum (Ø 160 mm) - Version with turbo function for chucks - Footprint approx. 1200 x 1200 mm

This Penta 650G CNC Erosion machine was manufactured in the year 2015 in Czech republic.

This Charmilles HD30CNC Erosion machine was manufactured in the year 2006.

Electric Lift Table – Used- : Price per piece ex site: 995.-€ (net)! Manufacturer: Edmo Lift Type: unknown Year of manufacture: unknown Stroke: approx. 1.30m Basic dimensions: approx. like a Euro pallet (i.e. approx. 1.20m x 0.80m) Condition: good Available: now Location: Wenkbach

Key data: 120 , 150

150kva Onan Cummins 6CTA8.3, YOM 1998 maybe, diesel generator set fully Refurbished genset, Complete major overhaul unit Right Know in excellent condition.

BIOBLOCK SCIENTIFIC orbital shaker, Dimensions (mm): 345x350 H 200 , Minimum / maximum stirring speed: 30 / 420, Minimum / maximum stirring height: 30 / 420

This Makino SP64 Wire erosion machine was manufactured in the year 2006 in Germany and has 40570 production hours. It is equipped with a MGW- 95 control unit.

table-size:900 x 600 mm three-axis-real value indicator: EDM Walter axis stroke (X,Y,Z):400 x 600 x 180 mm workpiece weight:max. 650 kg

This 3-axis Mitsubishi Electric EA8-S was manufactured in 2016. It features a fixed table with a retractable basin and an Advance M700 control unit. The machine offers strokes of 300x250x250mm, can handle a maximum piece size of 770x490mm, and supports up to 550Kg. Equipped with a tool changer for 10 tools, the Mitsubishi Electric EA8-S machine we have for sale represents a robust choice for precision erosion tasks. Contact us for further details regarding this Erosion machine.

Dough Dividing and Moulding Machine Fortuna Automat A3Product DescriptionManufacturer: Edmund SchröderType: Fortuna Automat A330 DivisionDough Dividing and Knitting MachineIncl. Power supply: 360 V / 50 Hz / 6 ADedetails see pictures.

Fortuna Automat A3 Dough Dividing and Knitting MachineProduct DescriptionManufacturer: Edmund SchröderType: Fortuna Vending Machine A3Condition: used, functional, baker's condition30 divisionDough part and warp knitting machineOutside Dimensions: W.: 65 cm, D.: approx. 74 cm, H.: 145 cmSee pictures for details.

CNC Wire EDM Machine FANUC MATRA ROBOCUT a-1iA5 Year of construction 2001 Travel: X-axis 520 mm Y-axis 370 mm U-axis 120 mm V-axis 120 mm Z-axis 310 mm Max. workpiece dimensions: 790 x 730 x 300 mm Max. workpiece weight 1,000 kg Wire diameter 0.1 to 0.3 mm Wire feed speed 250 to 2500 g Max. taper angle +/- 30°/ 80 mm Control: FANUC Series 16i-W Machine weight: approx. 2,600 kg

Step-Up Power Transformer ABB 8000 kVA, 21/6 kV, 50 Hz Good condition step-up transformers for mid-voltage step up from 6 kV to 21 kV with capacity of 2 x 8000 kV / 50 Hz. Transformer was made by ABB in 1999 and it has been operated approx. 32000 hours and dismantled in 2021 in full operational condition. It has ONAN cooling system and it is oil filled with external expansion vessels. Outgoing voltage can be regulated with a tap switch from standard 21000 kV +/- 2 x 2.5 % Technical Data Manufacturer ABB Finland Manufacturing year 1999 ABB Type KIRP 24 NC 800 Nominal power 8000 kVA / 50 Hz Nominal voltage 21000V +/- 2x2.5% Nominal currency 202A / 769.8A Insulation level LI 125 AC 50 / LI 60 AC 20 Direction N-A-B-C / a-b-c Total weight 16600 kg Weight of oil 2950 kg

Key data: 572 mm, 400 mm, 32 A

Die-sinking EDM machine x 350 mm y 250 mm z 315 mm Distance table - quill 550 mm Chuck 3R Macro Erosion Power Module EPO Fire extinguishing system Data Dielectric 250 liters extracted Length 1.75 m Width 2.10 m Height 2.53 m

Rated power: 400kVA, rated frequency: 50Hz, max. short-circuit duration: 2s, switching group: Dyn 5, cooling: ONAN. Total weight: 1350kg, oil weight: 310kg. Including an oil drip tray.