ona edm used for sale

Machine Details - Manufacturer: Sodick - Model: AD55L - Year of manufacture: February 2016 Electrical Specifications - Supply voltage: 200 V - Phase: 3-phase - Frequency: 50/60 Hz - Rated capacity: 8.5 kVA - Full load current: 24 A - RMS symmetrical amps: 50 A Operating Hours - Total operating hours: 3050 - Machining hours: 1470 - Included Accessories - Electrode holder - Approximately 20 clamping brackets - 1 dial gauge - DI and electrical components installed in the machine Additional Information The storage system expired in 2022. DI unit and all electrical components are installed and remain with the machine. A test piece can be machined upon request prior to purchase Find more here - / Contact us at -

Die Sinking Machine AGIE AGIETRON IMPACT 3 - C axis, automatic electrode change, Erowa, Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 500 mm, Cross travel y axis: 350 mm, Vertical travel z axis: 500 mm, C axis travel: 360 °, Working table size: 800x600 mm, Work tank dimension: 1100x730x400 mm, Automatic electrode change nr.: 28, Power supply: AGIEVISION 2, Max working current: 72 A, Filter type: Cartridge paper, Weight: 3.600 Kg, Accessories: EROWA Sistem

This 4-axis CHARMILLES ROBOFIL 4030 Si was manufactured in 1999. It features a maximum workpiece dimension of 1200 x 700 x 400 mm and can handle a weight of up to 1500 kg. The machine is equipped with a wire diameter range of 0.05 – 0.30 mm and a maximum cutting speed of 500 mm²/min. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES ROBOFIL 4030 Si machine we have for sale. Contact us for further details.

This 3-axis AgieCharmilles Robofrom 20 die-sinking EDM machine was manufactured in 1996. It features a maximum electrode weight of 25 kg and a table size of 397 x 300 mm. The machine has an impressive axis travel of X=300 mm, Y=250 mm, and Z=250 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles Robofrom 20 machine we have for sale. Contact us for further details.

This 4-axis PENTA 433GS CNC was manufactured in 2013. It features a working area of 1000 × 550 × 320 mm and a maximum workpiece weight of 700 kg. The machine is equipped with an automatic electrode changer and a controlled rotary axis (C-axis). If you are looking to get high-quality die-sinking capabilities, consider the PENTA 433GS CNC die-sinking EDM machine we have for sale. Contact us for further details.

This 3-axis Sodick AG 55 L die-sinking EDM machine was manufactured in 2008. It features a work table size of 750 x 550 mm and a maximum workpiece weight capacity of 1000 kg. The machine offers an X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 350 mm. If you are looking to get high-quality die-sinking capabilities, consider the Sodick AG 55 L machine we have for sale. Contact us for further details.

This 5-axis Sodick AQ535L wire EDM machine was manufactured in 2007. It features an X-axis travel of 550 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The work table size is 790 x 500 mm, with a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AQ535L machine we have for sale. Contact us for further details.

This 5-axis Sodick AQ537L wire EDM machine was manufactured in 2005. It features an X-axis travel of 570 mm, Y-axis travel of 370 mm, and Z-axis travel of 350 mm, along with a work table size of 806 x 496 mm. With a maximum workpiece weight of 1000 kg, this machine is designed for precision cutting. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AQ537L machine we have for sale. Contact us for further details.

This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details.

This 4-axis AgieCharmilles Roboform 54 was manufactured in 2000. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 256 mm. The machine can accommodate workpieces up to 850 x 650 x 256 mm and has a maximum workpiece weight of 400 kg. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles Roboform 54 machine we have for sale. Contact us for further details.

This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details.

AGIE AGIETRON HYPERSPARK 2 HS die-sinking EDM machine with control panel, as shown in the pictures. Please note: the chiller / cooling unit visible in the photos is not included in the sale. Technical data: • Model: AGIETRON HYPERSPARK 2 HS • Type: AT Hyperspark 2 HS • Power supply: 3 x 400 V / 50 Hz • Power: 8.3 kVA • Rated current: 12 A • Weight: 2700 kg • CE: 2008 Additional identification data: • Series / installation: 455 • Equipment list: 592.100.022 • Circuit diagram: 500.753.322 • Version ident.: 05.05.05 Scope of delivery: • machine • control panel • Not included in the sale: chiller / cooling unit shown in the photos. Application: Suitable for die-sinking EDM machining of hard materials, moulds, dies and hardened parts. Condition: Used machine, sold as seen. Inspection possible by arrangement. Auction-ID: A7-46285-1

Technical Specifications X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U/V axis travel: ± 80 mm Maximum piece weight: 450 Kg Bowl dimensions: 895 x 650 x 220 mm Table dimensions: 600 x 400 mm Rake Angle / Height: 20°; 80 mm Speed: 0-15 m/min Wire Diameter: 0.1-0.3mm Approximate weight: 3000 Kg Approximate Footprint: 1650 x 2125 x 2080 mm Accessories: Ethernet port ; PCMCIA port ; RS 232 port Item sold in unverified status Auction-ID: A1-44614-6

Technical data Manufacturer: AGIE Model No.: EMT 1.10 Machine Type: Die-sinking EDM Machine Year of Make: 1984 Weight: approx. 420 kg Max. workpiece size: 420 x 250 x 160 mm Travel X/Y/Z: 250 x 160 x 200 mm Generator power: up to 30 A Voltage: 220 / 380 V Frequency: 50 / 60 Hz Dimensions: approx. 1900 x 650 x 650 mm Configuration AGIEPULS Generator (60L2) Manual/analog control Servo-controlled feed Separate control unit Documentation available Clamping device mounted Note The technical data was taken from existing nameplates and machine documentation. Auction-ID: A1-46315-27

Technical data Manufacturer: Mitsubishi Electric Model No.: QA10 Machine Type: CNC Wire EDM Machine Year of Make: 2000 Serial number: 59Q10069 Max. workpiece size: 800 x 575 x 215 mm Max. workpiece weight: 800 kg Table size: 630 x 530 mm Travel distance: approx. 1300 mm (XYZ total) Wire diameter: 0.05 – 0.25 mm Wire speed: 2 – 25 m/min Machine dimensions: 1718 x 2385 x 1920 mm Weight: approx. 2500 kg Tank capacity: 400 l Configuration CNC control (closed loop) Up to 6 axes simultaneously 10.4\" color display RS232 interface Paper filter system (2-fold) Dielectric system integrated Note: Water cooling unit defective. Technical data taken from existing machine documentation. Auction-ID: A1-46315-20

This 3-axis CHARMILLES ROBOFORM 35P die-sinking EDM machine was manufactured in 2002. It features a travel range of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis, with a maximum workpiece weight of 500 kg. The machine is equipped with a 32-position rotary tool changer and a high-speed Z-axis for enhanced performance. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM 35P machine we have for sale. Contact us for further details.

This 5-axis CHARMILLES TECHNOLOGIES Robofil 290P was manufactured in 1999. It features a travel range of 400 mm x 250 mm x 200 mm and can accommodate a maximum workpiece weight of 500 kg with dimensions of approximately 850 x 500 x 200 mm. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES TECHNOLOGIES Robofil 290P machine we have for sale. Contact us for further details.

AEG ELOTHERM P1 CNC die-sinking EDM machine. Robust, heavy-duty industrial plant in gantry design with solid casting machine bed and large working area. Generous basin dimensions for machining large workpieces in tool and mould making. Stable work table with T-slots for picking up heavy molds and dies. Equipped with original ELO/AEG CNC control as well as classic pulse generator. Final drives via servo drives. Control cabinet fully stocked. Dielectric system with several pumps and central filter unit. Machine was in use with 72180h until the end. Signs of wear due to age present. Solid mechanical substance, suitable for applications in large-scale mold making and one-off production. Auction-ID: 04D-XCJ-4

\" Automatic wire feeder AWF2 from Seibu for use on wire EDM machines. The module is housed in a solid metal housing and comes in an original wooden box. Connections, controls and mechanical components are completely present on the outside. A functional test under machine was not carried out. Condition: • Used • Housing with slight signs of wear • Plug-in connection mechanically undamaged Scope of delivery: • Automatic wire feeder Seibu AWF2 • Original wooden cassette • Manufacturer: Seibu • Model: AWF2 • Device type: Automatic wire feeder (Wire Feeder) • Application: Wire EDM • Connections: Multi-pin circular connector • Installation position: Marking \"UP / DOWN\" available • Country of manufacture: Japan \" Auction-ID: A7-46417-54

Elotherm P1F die-sinking EDM machine, built in 1999, with CNC control and digital control panel. Machine with large working basin (basin size approx. 1900 × 1300 × 500 mm), control panel with integrated keyboard, screen and additional hand control unit (Elotrace). Extensive peripheral system with external filter technology: Franken Filtertechnik KG Type RF 70 Built in 1999 Volume 250 l Permissible operating overpressure 6 bar Permissible operating temperature 60 °C. Multi-stage filter unit, pump system and piping available. Integrated CO₂ extinguishing system with appropriate safety devices. Visible used condition with signs of wear due to age and duration. The system was in productive use in tool and mould making. Operating hours: 70,779.0h Auction-ID: 04D-XKW-4

Starthole Drilling Machine / Super Drill EDM Starthole Drilling Machine (EDM) for the production of starting and through holes in hard materials, e.g. for die-sinking EDM or wire EDM. Manufacturer: CASTEK Mechatron Ind. Co., Ltd.Model: HK-24 Year: 02 / 2002 Serial No.: 9024080 Equipment: Cross table (manual) Digital control and operating unit Protective cover / splash guard Cooling/flushing device Emergency stop operating instructions available (provisional manual HK-24) Accessories / scope of delivery: Electrode material (brass tubes, mixed, as shown) Various clamping and small parts Tool cabinet with Drawers incl. contents. Condition: Used Normal signs of wear due to age and use Machine comes from ongoing workshop operation. Connection: 400 V / 3-phase (3 PE) Power consumption: 4.5 kVA Compressed air requirement: approx. 25 l/min Operating pressure: 4–8 kg/cm² Electrical control:  ...

\" Manufacturer: EROWA Type: ER-009380 / ER-007523 EROWA Quick Chuck Automatic EDM Tool Holder Automatic quick chuck from EROWA for use on die-sinking EDM machines. The holder is used for fast and reproducible clamping of electrode holders in the EROWA clamping system. Delivery includes original packaging and documentation from GF AgieCharmilles. • Manufacturer: EROWA • Type: Automatic quick-release chuck • Item numbers: ER-009380 / ER-007523 • Additional holder: ER-032815 • Application: Die-sinking EDM • System: EROWA clamping system • Machine: compatible with GF AgieCharmilles • Condition: very good used condition • Origin: Made in Switzerland \" Auction-ID: A7-46417-399

\" Manufacturer: Novotec / Intech EDM Type / Name: Copper Threaded Electrodes for Die-sinking EDM M2.5 – M16 (various sizes) – Lot of copper threaded electrodes for die-sinking EDM machines (EDM) of various sizes. The electrodes come mainly from Novotec and Intech EDM and are intended for the EDM of threads (Thread EDM). The inventory includes several sizes from M2.5 to M16, some with flush bore and orbital design. The electrodes are mostly in original packaging or protective tubes and are unused or in stock. The electrodes are sorted by size and are located in storage boxes (M2.5 / M4 / M6 / M8 / M10 / M12 / M16). Copper threaded electrodes consisting of different sizes: • M2.5 (with flush hole) • M4 x 0.70 orbital • M6 • M8 • M10 orbital • M12 • M16 Partly in original packaging (Novotec) or protective tubes. Material: Copper Application: Threaded EDM / die-sinking  ...

Manufacturer: AGIE Model: Challenge 2 eCut Year of Manufacture: 2005 Type of Machine : Wire EDM machine Condition: Used, fully operational All annual maintenance documented Operating Hours - Re: 94,635 hours - Eros. Std.: 29,232 hours Electrical Data - Weight: 4,400 kg - Voltage: 3 x 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Short-circuit current: 10 kA Travel Distances - X axis: 350 mm - Y axis: 250 mm - Z axis: 256 mm - U axis: +/- 70 mm - V axis: +/- 70 mm Technical Features - Wire diameter: variable from 0.1 to 0.3 mm (open guides) - SF module generator for fine finishing: Ra 0.12 - 0.2 um - 3D measuring probe for automatic part alignment on the machine - Variocut - Easyrun - Purecut - Dynamic Corner Control - R module - CAM link - Pieceinser Find more here - / Contact us at -

Manufacturer: AGIE Model: Challenge 3 eCut Year of Manufacture: 2004 Type of Machine : Wire EDM Machine Condition: Used, fully operational All annual maintenance documented Operating Hours - Re: 109,008 hours - Eros. Std.: 27,172 hours Electrical Data - Weight: 4,400 kg - Voltage: 3 x 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Short-circuit current: 10 kA Travel Distances - X axis: 500 mm - Y axis: 350 mm - Z axis: 256 mm - U axis: +/- 70 mm - V axis: +/- 70 mm Technical Features - Wire diameter: variable from 0.1 to 0.3 mm (open guides) - Konik-Plus for very precise conical cutting - Surface finish down to Ra 0.3 um - 3D measuring probe for automatic part alignment on the machine - 1 additional filter for very long runtimes - Variocut - Easyrun - Purecut - Dynamic Corner Control - R module - CAM link - Pieceinsert Find more here - / Contact us at -

A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

Model 2000 year of construction 1999 machine in excellent condition travels : X: 320 mm | Y: 220 mm | Z: 116 mm |U: ± 50 mm | V: ± 50 mm Max Workpiece Dimension: 900x 520 mm max load: 150 Kg Max workpiece height : 150 mm immersion max workpiece height between guides: 260 mm

Machine type: CNC Die Sinking EDM Manufacturer: Sodick Model: AM35L Control: Sodick LN / LN1 control Year: n/a Serial number: n/a Working hours: n/a Table size: approx. 600 x 400 mm Axis travel (X/Y/Z): approx. 350 / 250 / 250 mm (typical for model) Process type: Die sinking EDM Generator: Sodick generator Tank: Integrated dielectric tank Control system: Sodick LN1 control with external monitor (KME) Data input: Floppy disk (2DD) interface Cooling system: External oil temperature regulator (Kanto Seiki Oilmatic) Pump system: Integrated dielectric pumps Accessories: Oil temperature unit, dielectric system, control unit Remarks: Machine in used condition. Control boots (system loading visible). Typical signs of use and dirt/oil residues. Equipped with external oil temperature control unit and dielectric system. Own mass: approx. 3,500 kg Dimensi ...

Type: Die-Sinking EDM Machine (Spark Erosion) Brand: Sodick Model: AQ55LR Control: Sodick LN1 Controller Application: Precision die-sinking EDM for mold & tool making Equipment: - Dielectric tank with working table - Z-axis head with electrode holder - CNC control unit with screen & keyboard - Manual control pendant - Integrated dielectric filtration system - Machine enclosure / splash guards Technical Data: - Axes: X / Y / Z (CNC controlled) - Control: LN1 Condition: Used Auction-ID: A7-45993-67

Make: Sodick Type: CNC Die Sinking EDM Machine Model: AQ35LR Control: Sodick LN1 Controller model: LQ3 Technical data: - Axes: 3 (linear) - Working tank: Die-sinking EDM - Table size: approx. 600 x 400 mm (estimated) - Z-axis display visible on control Equipment: - Sodick LN1 CNC control with keyboard & monitor - Integrated dielectric system - Tooling system (Walker-Hagou fixture visible) - Electrode changer / tool rack - Pressure gauges and flushing system - Manual control pendant Condition: Used Auction-ID: A7-45993-52

Type: Wire EDM Machine (Wire Erosion) Brand: Sodick Model: AQ600L Drive: Linear Motor Drive AWT: Fixed Jet Automatic Wire Threading Application: High-precision CNC wire cutting for molds, dies, and tooling Equipment: - Fully enclosed machining area with safety window - CNC control unit (Sodick LN2W) - Control panel with keyboard & display - Manual pendant with emergency stop - Automatic wire threading system (AWT) - Wire feed and spool system - Dielectric tank with working table - Integrated filtration and pump system - Pressure gauges and fluid control Technical Data: - Axes: X / Y / Z / U / V (CNC controlled) - Control system: Sodick LN2W Condition: Used Auction-ID: A7-45993-70

Type: Wire EDM Machine (Wire Erosion) Brand: Sodick Model: AQ537L Series: Premium Control: Sodick LQ33W Controller Application: High-precision wire cutting for tool & die manufacturing Equipment: - Fully enclosed machining area with sliding doors - Wire feed system with spool holders - Automatic wire threading unit - CNC control with monitor & keyboard - Manual control pendant - Dielectric tank with worktable - Integrated filtration system Technical Data: - Axes: X / Y / Z / U / V (CNC controlled) - Control: LQ33W Condition: Used Auction-ID: A7-45993-68

Type: Wire EDM Machine (Wire Erosion) Brand: Sodick Model: AQ535L Controller: LN1W Linear Servo Controller Application: CNC wire cutting for high-precision tooling and mold manufacturing Equipment: - Fully enclosed machining cabinet - Sliding front door with safety window - Wire feed system with spool holder - Automatic wire threading unit - CNC control with screen & keyboard - Integrated floppy/USB interface - Manual control pendant - Dielectric tank with worktable - Filtration and dielectric circulation system Technical Data: - Axes: X / Y / Z / U / V (CNC controlled) - Control system: Sodick LN1W Condition: Used Auction-ID: A7-45993-69

Travel X/Y/Z: 350mm/250mm/256mm, travel U/V: +/-70mm, max. taper angle: 30°, max. height: 100mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 750mm/550mm/150mm, max. workpiece weight: 200kg, max. threading height: 250mm, wire tension: 25N. Machine dimensions X/Y/Z: approx. 1650mm/2050mm/2250mm, weight: approx. 2600kg, control: Agievision. Documentation available. An on-site inspection is possible.