om used for sale

Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OMAP, Lead screw and feed screw lathe type Al.Pin 180 -Turning length: 1600 mm -Turning diameter over bed: 410 mm -Turning diameter without bed: 570 mm -Turning diameter over support: 230 mm -Spindle bore: Ø 53 mm -Spindle speeds: 12 - 1650 rpm -Three-jaw chuck: Röhm Ø 250 mm -Tailstock mount: MK3 -Drive: 2.2 kW -Accessories included, see photos -Dimensions: 2670/900/H1355 mm -Weight: 1460 kg

The machine is in good technical condition; inspection is possible by prior arrangement.

Hydraulic motor Danfoss OMV 50 The spare part is in good condition, but this is still a used item that shows or may show slight signs of wear. Internal number : 628 457 398079628098

Hydraulic motor Danfoss OMV 50 The spare part is in good condition, but this is still a used item that shows or may show slight signs of wear. Internal number : 628 456 398079651365

Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Hydraulic motor Danfoss OMV 50 The spare part is in good condition, but this is still a used item that shows or may show slight signs of wear. Internal number : 628 455 257573212856

Orbital motor Manufacturer: Danfoss Article number: OMT 160 T OMT160T 151B3042 NEW and fully functional, from stock, see pictures for more details. Internal number: 602 209 397695596656

TECHNICAL DATA Materials: • PE • PP • Extra Cut • Thermo • Clear and Clear • PET • Suitable for blank materials • Suitable for pre-printed materials with register marks Operating / Printing Modes: • Semi-rotary • Full-rotary • Centre dancer • Webbing-up mode for web threading • Printing mode • Web type selection: blank web / printed web Flexographic Printing Unit: • 1 flexographic printing station • Suitable for UV ink and varnish • Printing cylinder • Varnish cylinder • Impression roller • Anilox roller • Cartridge Electrical & Pneumatic Requirements: Electrical supply: 400 V Current: 40 A Frequency: 50 Hz Compressed air: 6 bar Air consumption: 300 l/min

ID3893 OMP Water treatment / Wasseraufbereitung year/Year of construction 2008 Water treatment Water treatment

TECHNICAL DATA: Saw stroke: 550 mm Saw blade: max. Ø 300 mm Tilt of the saw blade: 0° - 90° Installed power: 2.5 hp

OMGA V313 Mitre Saw Double Saw Adjustable Angles Two Saw for Cutting at 45-40-30-22 Degree Angles Blade diameter 300mm Saw hole diameter 30mm Saw speed 3000 r.p.m Motors 2×2.2 kw Air Requirement 5-7 bar Cutting Width: 60mm Cutting height: 100mm Machine dimensions: length 1420mm, width 830mm, height 1760mm Machine Weight 500kg

gantry machining center, year 2011, CNC iTNC 530. Used machine. More info & price on IndustrialBuyer.

Used AUTOMA AT PLUS 5D HDPE injection molding machine 5 liter - Year 2001Technical Specifications & Performance DataThe Automa AT PLUS 5D is an industrial molding machine configured for HDPE container production. It is equipped with a double carriage and a single-head arrangement, supporting controlled and repeatable handling during the production cycle. The machine is designed for 5-liter applications and features a head center distance of 160 mm.Manufacturer: AutomaModel: AT PLUS 5DYear: 2001Application: HDPE container productionContainer capacity: 5 litersCarriage configuration: Double carriageHead configuration: Single headHead center distance: 160 mmAdvanced Automation & Control SystemsThe double-carriage configuration is intended to support coordinated machine movement and consistent production handling. The single-head layout provides a straightforward operating arrangement for de ...

Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!

Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned obj ...

2x New tires Michelin Omnibib 620/70r42 160D Auction-ID: A3-46141-11006

- Production standard: 4 blister packs of 100x60 mm per cycle for plastic with aluminium cover or other materials, and 1 blister pack of 155x80 mm per cycle in Alu-Alu. - Time and temperature management: equipped with two timers, two temperature regulators and two PT100 probes to ensure a perfect temperature and produce high-quality blister packs. - Sheet dimensions and capacities: - Maximum forming depth: 15 mm - Maximum dimensions of PVC-Alu sheets: 240 x 160 mm - Maximum dimensions of Alu-Alu sheets: 170 x 90 mm - Estimated production: - PVC-Alu: approx. 350 units per hour - Alu-Alu: approx. 80 units per hour - Cycle frequency: 3 to 8 minutes - Temperature range: 0 to 200°C - Power supply: 230V, 50Hz - Power consumption: 1.5 kW - Compressed air: 3-9 bar - Tools currently with the machine: - 3 blister packs with 10 cells diameter 14 mm, depth 8 mm PVC/ALU - 2 blister pack ...

Operation unknown Auction-ID: A1-50544-51

Industrial horizontal flow-wrapping machine. Auction-ID: A1-42990-279

Hydraulic veneer guillotine with metal worktable, front blade guard, push-button controls, emergency stop buttons, pressure gauge and adjustment handwheel. Electrical supply label: 380 V / 50 Hz. Auction-ID: A1-50699-15

- Belt type shot blasting machine with 2 turbines. - Crib capacity: 1.5 tons. - Especially suitable for small parts. - Includes output belt. - Crib measurements: 270 x 145 x 90 cm. - Includes 500 kg GH jib crane with 250kg capacity hoist, without control. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-23

OMC Azzurra open-front water curtain spray booth with extraction fan and ducting, water circulation pump, control box and workpiece support. Includes two air-operated paint pumps with pressure regulators and hoses. One pump is labelled Kondal. Auction-ID: A1-50699-24

- Machine designed for automatic shot blasting of castings, stamped parts and other hooked parts. - Maximum load per hoist: 2,000 kg. - Maximum dimensions of the pieces: Ø2,000 x 2,400 mm in height. - First theoretical shot load: 2,000 kg. - Installed power of the machine with STM separator: approx. 40 kW total - Acceptable ambient temperature: from -5 ºC to +40 ºC. - Pneumatic equipment with a operating pressure of 580 kPa. - Compressed air consumption: approx. 3 N m³/h. - Includes shot blast chamber protected with anti-wear material. - It has an overhead conveyor for handling the parts. - Incorporates a vacuum system and dust filter. - It has 4 turbines - The machine is prepared for connection to the vacuum/filter assembly. - The working system allows the rotation and translation movement of the hook for a uniform finish. - Operating conditions of this machine: unche ...

Pendulum circular crosscut saw for wood, equipped with an electric motor, enclosed belt drive, circular blade guard and manual operating handle. Mounted on a steel support frame with roller tables and longitudinal workpiece fence. Motor-mounted push-button controls. Auction-ID: A1-50699-44

Used 4-metre roller conveyor (auxiliary roller support / helper) by OMGA. • Auxiliary support for carrying long workpieces in front of or behind a machine. • Suitable for metal fabrication and woodworking shops. • For exact technical specifications and current operating condition, please contact us. Auction-ID: A7-50988-129

Trough mixer for powdery and doughy products in batch operation. Trough volume approx. 100 l. Trough, cover frame and discharge chute made of stainless steel. Horizontal mixing shaft, bearing flanges on both sides of the trough end walls. Mixing tool and shaft are not built-in. Side-mounted drive block with gearbox in painted housing. Trough can be tilted via hand lever for emptying. Hinged protective grille over the trough opening. Separate control box with start, emergency stop and selector switches. Control renewed, with Siemens Sirius contactors, Eaton control devices and 24 V power supply. Use in bakery, food, feed and powder processing. Traces of use, paint chips on the drive housing. All dimensions and weights are approximate. Auction-ID: A1-51072-18

Chamfering device, adjustable and functional, gross weight 5kg Auction-ID: A7-51245-108

Used REDA FBF 4015 pasteurizer 2000 LPH - Year 2016Technical Specifications & Performance DataThe REDA RE25TE centrifugal separator is designed for milk and whey skimming, standardization and clarification in dairy processing operations. It is a second hand industrial processing machine suited to beverage production and food-processing environments where controlled separation and product quality are essential.Manufacturer: REDAModel: RE25TEMaximum skimming capacity: 2,500 L/hBowl rotation speed: 7,500 rpmMotor power: 7.5 kW three-phase electric motorNet weight: 610 kg in standard installationGearbox oil quantity: approximately 3.8 litresProduct connections: DN25 and DN40Advanced Automation & Control SystemsThe separator features an automatically closing bowl, closing when approximately 6,000 rpm is reached during start-up. Typical start-up time is 4–5 minutes. Correct rotation is essen ...

Auction-ID: A1-41281-33

Saw blade diameter 315 mm Cutting diameter 80 mm Speed 1450 rpm Table 450 x 400 mm Mitre 45°/45° Connection voltage 400 volts Total power requirement 1.2 kW Machine weight approx. 0.2 t Space requirement approx. 0.9 x 0.9 x 1.4 m Auction-ID: A7-51438-450

Hydr. Machine vise Jaw width 160mm Jaw height 45mm Wingspan 300mm Condition: untested Auction-ID: A7-51438-653

OMGA professional radial saw, model RADIAL 900/5, for wood cutting work in the workshop. Features: Brand: OMGA; Model: RADIAL 900/5; year: 2012; Serial Number: 7380; engine power: 3.68 kW; Power supply: 400 V / 50 Hz; Blade diameter: max. 400mm; Min. blade diameter indicated: 390 mm; Bore: 30mm; CE marking. Machine equipped with a large work table and an adjustable radial sawing unit. According to the saleswoman, the machine was working when it was last used, but has not been used for a long time. Machine sold in its current condition. Auction-ID: A3-46110-41163

Model: OM130 Machine type: Hydraulic Breaker (Hammer) Application: Demolition & rock breaking Carrier class: approx. 18 – 25 t excavator Operating weight: approx. 1,800 kg Tool type: Moil point Mounting: Pin-on bracket (adapter required depending on carrier) Hydraulic system: Requires auxiliary hydraulic circuit Remarks: Suitable for concrete demolition and rock breaking works Auction-ID: A1-50932-123

Graseby Omnifuse 3150 Syringe Pump 5-Pack Manufacturer: Graseby Model: Omnifuse 3150 Quantity: 5 Auction-ID: A1-51618-47

Graseby Omnifuse PCA Morphine Pumps (PCA Syringe Pumps) 5-Pack Manufacturer: Graseby Model: Omnifuse PCA Quantity: 5 Auction-ID: A1-51618-49

Graseby Omnifuse 3150 Syringe Pump 5-Pack Manufacturer: Graseby Model: Omnifuse 3150 Quantity: 5 Auction-ID: A1-51618-46

Omron BF508 – Digital Impedance Meter Scale Manufacturer: Omron Model: BF508 The fat scale is a device that allows you to measure your body weight and provides you with important data on the evolution of your weight. This measuring device is intended for both healthcare professionals and individuals. With the Fat Mass Scale, you will have a complete analysis of your weight and a complete picture of your body composition thanks to the bioelectrical impedance method that includes body fat level, visceral fat and BMI. Clinically validated and regulated by CE marking, the scale offers high measurement accuracy and records changes in your body as you weigh it. The fat mass analyzer's LCD display allows results to be clearly displayed. The device offers measurement capability for up to 4 users with a guest mode included and these 8 sensors perform a measurement between the upper and l ...

Graseby Omnifuse 3150 Syringe Pump 5-Pack Manufacturer: Graseby Model: Omnifuse 3150 Quantity: 5 Auction-ID: A1-51618-48

Maximum working pressure: 700 bar. Rated flow capacity: 60 liters/hour. With accompanying control box. Auction-ID: A1-42990-210

Graseby Omnifuse PCA Morphine Pumps (PCA Syringe Pumps) 5-Pack Manufacturer: Graseby Model: Omnifuse PCA Quantity: 5 Auction-ID: A1-51618-50