om used for sale

Code: 0352 Brand: OMW VALENTINI Model: 700 Pit clamp for chairs, for assembling classic, modern, style chairs etc. Technical data: Assembled steel frame Useful pit mm 700 x 700 N° 4 cylinders with adjustable stroke that can be moved on the plane Counterweight Foot pedal for simultaneous operation of the 4 cylinders Compressed air 7-8 atm Overall dimensions mm 1300 x 920 x 750 h Weight kg 700

HOT PRESS model OMC PL 90 , with diathermic oil heating second hand machine machine worked very very little excellent working conditions , like new CE compliant machine diathermic oil heating via built-in electric boiler heating power KW 9 / 18 for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.85 max. thrust Ton.90 opening mm.400 hydraulic pump motor power Hp 3 n.4 racks for table lifting guide max. thrust 2.5 kg/cm2 total installed power 21 kW volt. 380/50 net weight kgs. 4500

AUTOMATIC DOUBLE MITRE SAW model OMGA TR 2B N oleo second hand machine in Excellent working condition , like new for cutting wood, frames, pvc, aluminium, plastics and various materials CE compliant machine: YES oil pneumatic downstroke of the blade groups alternate or simultaneous blade descent inclination of cutting blade groups + / - 45° bimanual control from the control panel n.02 motors . power Hp 3 each one blades diam. mm. 350 max. useful cutting length mm.2800 min. useful cutting length mm.320 max. useful cutting width 90° mm. 170 x 102 H max. useful cutting width 45° mm. 110 x 102 H volt. 380/50 weigth kgs. 600

HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device Safety rope around the press Red emergency Button Two Hand control Norma ...

ID3397 OMAG K1400 year/Baujahr 1997/2004 Block stacking system including hydraulic unit (built in 1997), doppler including hydraulic unit (built in 2004), board destacker and board stacker including roller conveyor, board infeed and board conveyor to the mast, board turner Stone stacking system including hydraulic unit (built in 1997), Doppler including hydraulic unit (built in 2004), board destacker and board stacker including the roller conveyor, board feed and board track to the lifting frame, board turner

OMZ NT 20 vertical machining center :::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 0i MD Tool Attachment: ISO 40 Number of spindle speeds: 10000 Number of tools: 20 X-axis travel: 725mm Y-axis travel: 450mm Z-axis travel: 450mm Fast feeds linear axes X Y Z: 32m/min Guides: roller Pallet change: yes Pallet size: 700x450mm Maximum allowable load: 350Kg Round pallet: yes High refrigerant pressure: yes :::D DIMENSIONS AND WEIGHT::: Length: 2950mm Width: 3360mm Height: 2885mm Weight: 7000Kg

Coolant Valve OMAL Type DA (for Tacchella A160)

Engine Brand: MERCEDES, Conditie: NEW, Nominal Power @ Nominal Rpm: 220 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 106 mm, Stroke: 136 mm, Engine Capacity: 7201 cc, Qty Cylinders: 6 Qty, Emission Certificate: EURO 3 , Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/226614, , = More information =, , Type: Engine, Type number: OM 926.929; Transport weight [kg]: 671

Engine Brand: MERCEDES, Conditie: RECONDITIONED, Nominal Power @ Nominal Rpm: 130 Kw, Emission Certificate: EURO 3 , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Engine Condition: Rebuild , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: No , Starter Voltage: No Starter Present , Rated Power: 150 Kw, Rated Speed: 2200 Rpm, Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/catalog/product/view/id/221632, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: OM 906.991; Transport weight [kg]: 600

Engine Brand: MERCEDES, Conditie: CORE, Nominal Power @ Nominal Rpm: 213 Kw, Engine Injection Type: MECHANISCHE INJECTIEPOMP , Engine Aspiration Type: NATUURLIJK AANGEZOGEN , Bore: 130 mm, Stroke: 142 mm, Engine Capacity: 15080 cc, Qty Cylinders: 8 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/218696, , = More information =, , Type: Engine, Year of construction: 1010, Type number: OM 442.925; Transport weight [kg]: 870

Engine Brand: MERCEDES, Condition: USED, Engine Injection Type: MECHANISCHE INJECTIEPOMP , Engine Aspiration Type: TURBO , Bore: 128 mm, Stroke: 142 mm, Engine Capacity: 14618 cc, Qty Cylinders: 8 Qty, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Orange , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 254 Kw, Rated Speed: 1900 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mercedes-om442-901-400-use d/330, , = More information =, , Type: Engine, Year of construction: 1010, Type number: OM442.901-400; Transport weight [kg]: 1090

Engine Brand: MERCEDES, Conditie: USED, Nominal Power @ Nominal Rpm: 320 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 128 mm, Stroke: 142 mm, Engine Capacity: 14618 cc, Qty Cylinders: 8 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: No Flywheel , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/273207, , = More information =, , Type: Engine, Type number: OM 442.901; Transport weight [kg]: 1250

Engine Brand: MERCEDES, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 300 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 350 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mercedes-om403la-used-engi ne-parts/22397, , = More information =, , Type: Engine, Type number: OM403.999; Transport weight [kg]: 1700

Engine Brand: MERCEDES, Conditie: USED, Nominal Power @ Nominal Rpm: 210 Kw, Engine Injection Type: MECHANISCHE INJECTIEPOMP , Engine Aspiration Type: NATUURLIJK AANGEZOGEN , Bore: 130 mm, Stroke: 142 mm, Engine Capacity: 15080 cc, Qty Cylinders: 8 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Rated Power: 350 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/219484, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: OM 442.909; Transport weight [kg]: 1080

Engine Brand: MERCEDES, Conditie: USED, Nominal Power @ Nominal Rpm: 320 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 128 mm, Stroke: 142 mm, Engine Capacity: 14618 cc, Qty Cylinders: 8 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 260 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/297188, , = More information =, , Type: Engine, Empty weight: 1.060 kg, Type number: OM 442.901

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

round bar steel: 32 mm square edge steel: 30 mm L-beam: 80 x 80 x 8 mm : 80 x 13 mm : 36 t throat: 170 mm work stroke: 28 mm work height max.: 980 mm material thickness: 28 x 13 mm hole diameter in sheet thickness: 25x10 / 30x8 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,2 x 0,8 x 1,9 m Profile steel scissors with - 4 workstations - 1 foot trigger - hydr. drive - Support tables - Rectangular notcher - Hole punch including tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2626 OMAX JetMachining Center Water jet system The machine has been completely overhauled and has very few operating hours. Machine type 2626. Size LxWxH 106х77х96. INNOMAX desludging system, OMAX EnduroMAX pump P5060 and INNOMAX abrasive conveying system also included. High-precision premium waterjet cutting The first-class OMAX JetMachining® Centre was developed for advanced systems, where performance and results are paramount. The OMAX JetMachining Centre is a true hard worker for production in any manufacturing environment and delivers: - Manufacturing high-precision multi-axis parts quickly and consistently with OMAX IntelliMAX® software - Improved efficiency with EnduroMAX® pumps that deliver the highest nozzle performance - Reduced maintenance with durable and hardwearing materials - Increased uptime through improved IntelliVISOR® system monitoring - Better end ...

Glue spreader with 4 roller Brand: Omma Type: GS Technical data: Working width: 1.360 mm Max throughfeed height 80 mm Speed: 16,5 m/min. Working height: 905 mm Diameter of application rolls: 200 mm Diameter of metering rolls: 185 mm Connected value 1,3 kW Colour RAL 7035 Operation side left Electric 400/50/3 Technical equipment: - Each 1 drive motor for the upper and lower spreading unit for highest precision and to get a low-noise vibrational free run. - Rubber coated application roller with sanded surface - Hard rubber coated dosing rollers with sanded surface - Display for height adjustment of application rollers, precision: 1/10 mm - Manual adjustment of dosing rollers depends on the application rollers for an even glue application - Special tighted bearing to prevent sluggishness, blockages and overheating. - Safety grid as a safety device at machi ...

Specifications: Working length: 2550 mm Max. bending power: 6.0 mm Bend : 4.0 mm Diameter upper roller: 176 mm Diameter lower roller: 176 mm Control panel with digital display Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 4000 x 1400 x 1500 mm Weight: approx. 3.6 tons Note: the machine was used exclusively for straightening coated aluminum sheets Rollers were wrapped in foil, which was removed without leaving any residue Condition of the rollers almost as good as new few operating hours

Manufacturer: Omec Model: FSU/600 ACG Year of Manufacture: 1991 Type of Machine: Automatic Profile Milling Machine with Template Scanning Machine Details: Blade diameter approx. 60 cm, 380V, 50Hz Machine Powered: No Operating Hours: Approx. 2,000h Additional Accessories: Lathe, various saw blades Find more here - / Contact us at -

Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electric e ...

YOC 2001, working width 220 cm, 4 weft colors Stäubli electron. dobby 2871 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

doubel side brushing unit Brand: OMMA Type:SPX_1400 New machine with transversal cleaning system Technical data: Useful working width about mm 1.350 Maximum working thickness mm 150 Adjustable speed mt/min 5~25 Working level (adj. +/- 20mm) mm 905 Brush rotation speed about mt/min 92 Suction connections Ø mm 120 Installed power about kW 1,2 Color Ral 7035 Command side (in front machine, looking at the entrance) Right Standard voltage v 400/50/3 Technical equipment: - Top & bottom transversal cleaning system by means of motorized belts with special nylon brushes. - Adjustable system to compensate the natural lengthening of the brushes, increasing the lifetime. - Mechanical devices through the brushes to remove dust allowing the best elimination/aspiration. - Special cleaning system for the finest particles, with adjustable atomizers and separate tank for specif ...

02 sets Picanol Air-Jet Weaving Looms, type OmniPlus Summum – 250-4R YOC 2015, working width 250 cm, 4 weft colors Stäubli electron. dobby 3220 / C4Can – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, double whip rollers, max warp beam flange dia. 1,000 mm, off-loom take-up

Netzsch Omega 60 homogenisator with control cabinet. Rated flow: 60 liter/hour Maximum pressure: 700 bar.

01 set Picanol Air-Jet Weaving Looms, type OmniPlus 800 – 220-4R YOC 2010, working width 220 cm, 4 weft colors Stäubli electron. dobby 2881 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

Various metalworking machines are available as remaining stock. 1/2/3) Three wobble riveting presses Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) Schlenker & Cie Atlas W4 high-speed planer, year of manufacture: 1961, weight: approx. 1700kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of construction: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of construction: 1940s, conversion: 1964. 7) Cross-cut saw Berg & Schmid Mini Compact, year of construction: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection is possible. Individual sale possible.

01 sets Picanol Air-Jet Weaving Loom, type OmniPlus 6-P - 340 YOC 2001, working width 340 cm, 6 weft colors Stäubli cam motion 1661 (of 2006) – 6 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

OMNIFLO overhead Hanging goods conveyor system driven curve aluminum RA2412 Manufacturer: Schöneberger Technical data: Inner radius: 800 mm Outer radius of drive: 1000 mm = 800 mm + 200 mm order drive Minimum length of leading straight section: 300 mm Minimum length of trailing straight section for motor: 600 mm Overall height: 110 mm profile height + Direction of rotation: right, left curves optional Drive type: chain with brushes Conveyor speed: 0.16 m/s Electrical data: Voltage: 3x 380V high voltage Ampere: 1.75 A Power: 0.55 kW Installation: Ceiling suspension with motor support recommended, as shown in the photos Primarily intended for flat transportation. Slight inclines may be possible depending on the length and weight of the trolley convoy Optionally available: Ceiling suspension Angle adjustment Change of direction of rotation (left-hand curve) Extensions with straight section ...

01 sets Picanol Air-Jet TERRY Weaving Loom, type OmniPlus SUMMUM- 340 YOC 2015, working width 340 cm, 6 weft colors Stäubli DOBBY STAUBLI – electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

Key data: 300 mm

SPECIFICATIONS: Saw blade: Ø 300 mm Installed power: 2.5 HP Voltage: 380 V EQUIPMENT: 01 Workbench

ID3502 OMAG Plant for large-diameter pipes  / Großrohranlage OMAG large pipe system (all hydraulic) including molds, bases, support rings, various accessories and forklift with turning tongs OMAG large-diameter pipe system (all hydraulic) including moulds, lower sleeves, support rings, various accessories and forklift with turning pliers

High precision protective film laminating machine Brand: Omma Type: PRO-J14_TF New machine Single machine (not integrated in a line) Workpiece dimensions: min. width 130 mm max. width 560 mm min. length 300 mm max. length 2.250 mm min. thickness 19 mm max. thickness 25 mm For application of self-adhesive film on the top of painted surfaces. Laminating rollers Ø 150 mm Working width 1.300 mm Max. workpiece thickness 80 mm Speed adjustable 5/25 m/min Working height (adjustable +/- 20mm) 905 mm Connected load kW 0.75 Integrated insertion/exit rollers Length (approx.) 300 mm Color RAL 7021 + RAL 2004 Operator side (in front of the machine, towards the entrance) right side Standard voltage v 400/50/3+N+T Max. Outer diameter of roller Ø 300 mm Inner diameter of roller Ø 76 mm Technical equipment: - High precision automatic cross cutting foil cutting  ...

Machine for punching and sharpening belts at the same time

Used packaging machine for sachets from 3 grams to 100 grams of Italian brand Omag model C3/1. New 2002. Control panel with touch screen, electric panel.

Manufacturer: Fischer Rückle, Type: Omnimaster, Year: 2006, Working width mm: 1200, Veneer thickness min mm: 0,5, Veneer thickness max. min: 1,6, Feeding speed max m/min: 10-60, Feeding speed continous adjustable: yes, White glue connection: yes, Blue cooling: yes, Total power kW: ca.10, Wight approx. kg: 1500, Year :2006

Manufacturer: Fischer Rückle, Type: Omnimaster, Year: 2007, Working width mm: 1200, Veneer thickness min mm: 0,5, Veneer thickness max. min: 1,6, Feeding speed max m/min: 10-60, Feeding speed continous adjustable: yes, Thread heating: yes, Total power kW: yes, Wight approx. kg: ca.10, Required space L x W x H mm: 1500, Year :2007

Total actual Printing hours, only 26,000, Specifications:, Infeed Conveyor for feeding Vertical Lid Stacks, Robotic removal of Lids from stack to Print Unit Conveyor, Auto-Denester Unit, No Lid no Ink and No Lid no Print System, ARCOTEC CG20-2 Pretreatment station, Main 6-Color Print Unit, Speed Control for Ink Fountain Rollers, Printing Roller self-cleaning device, Max. speed 30,000 Lids/ hr (depending on Lid size & shape), Max. Lid dia. Ø 200 mm, Min. Lid dia. Ø 50 mm, Max. Lid Height 25 mm, Max. Rectangular Lid size: 200 x 200 mm, Max. Printing dimensions: 180 x 180 mm, No. of Printing Blankets 4, UV Tunnel TUV 0077-99, UV-Tunnel power rating : 8 kW, Main printer power rating: 20kW, Polytype Counter/ Stacker unit, delivers Counted Vertical Stacks., 400 V 3phase, 50 Hz,, Printing Plate Pre-registration Unit., Max Lid dia: Ø 200 mm, Min Lid dia: Ø 50 mm, Max Lid Height: 25 mm, Max R ...

Code: 0125 Brand: OMEC - ITALY Model: F8 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and various furniture elements - CE Standard The machine is equipped with a unit of 8 spindles with equal mill cutters that allow the production of indents of different heights. Technical data: No. 8 spindles Spindle revolutions /min 17,000 Maximum working width mm 400 Distance between centres of indents mm 25 Drawers production 120 / hour Power Kw 7,5 Working pressure 6 atm Overall dimensions: mm 1500 x 1000 x 1200 h Weight kg 1100

An NC mitre saw Omga S.p.A. is available. Speed: 3000 rpm, saw blade diameter: 300 mm, saw blade bore: 30 mm, max. cutting height: 60 mm, max. cutting width: 60 mm, max. feed: 1250 mm, angle adjustment: 45°/30°/22.5°, machine dimensions X/Y: approx. 5600 mm/1250 mm. Documentation available. On-site inspection is possible.

Machine d'impression offset OMSO DM 144 lids?Destinée à l'impression offset de couvercles 6 couleurs Année 2005 Vitesse max de production : 30 000 pièces/heure Diamètre max du couvercle : 200 mm Diamètre min du couvercle : 50 mm Hauteur max du couvercle : 25 mm Dimensions max d’un couvercle rectangulaire: 200 x 200 mm Dimensions min d’un couvercle rectangulaire: 50 x 50 mm Dimensions max d’impression : 180 x 180 mm Nr des tampons d’impression : 4 Nr des tampons de contre impression : 1 Puissance électrique installée : 20 KW?Puissance séchage UV : 8 KW Consommation air et pression : 700 Nl/min Poids total machine: 3800 KG

x-travel: 665 mm y-travel: 465 mm z-travel: 350 mm weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,11,12,2 m No. 0298 3D measuring machine DEA OMICRON A 001 Working area: 665 x 465 x 350 TROLL - microprocessor system L x W x H 1100 x 1100 x 2200 mm Weight approx. 620 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala.

Offer 25115 Radial arm - Schiffterschnitt - Pendulum train saw Specifications: - Saw blade diameter 400 mm - Saw blade speed 3000 rpm - Cutting height up to approx. 125 mm - Cutting depth up to approx. 600 mm - Mitre adjustable in 2 axes - Table size approx. W 800 x D 800 mm - Table height 920 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 800 x H 1900 x D 1100 mm - Weight approx. 200 kg

Renishaw OMP60 probe system with SK mount Manufacturer: Renishaw Model No.: OMP60 Mounting type: SK (probably SK40, please confirm if necessary) Application: Automatic touch probe for CNC machines Scope of delivery: – Probe OMP60 – SK holder with integrated radio module – Stylus (Ruby) – Assembly tool (hexagon socket) – Original Renishaw case - Quick Start Guide in Multiple Languages Price without VAT Condition: used, very good condition

Range of machines Manufacturer: OMSO Machine designation DM 385/6 BOX Year of Make: 2000 Operating hours approx. 31.950 Number of Printing Stations 6 Number of inking units 6 Number of Ground Pressure Stations 2 Number of ground printing inking units 2

SPECIFICATIONS: Saw blade spacing: max. 2800 mm Tilt: 0° - 90° Saw blade: Ø 350 mm Installed power: 2.2 kW x 2

SPECIFICATIONS: Saw blade spacing: max. 2400 mm Tilt: 0° - 45° Saw blade: Ø 200 mm Equipped with multi-function display Installed power: 1.18 kW x 2

A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1 ...