om vertical lathe used for sale

Tip width: 1200mm; Copy device: Yes; Motor power: 1.5kW; Speed: 870 / 1400 / 2100 rpm; Lots of accessories available!

Spindle support for SUI 80 longitudinal direction

Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench: 620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T

(3x) Lathe chucks (3- and 4-jaw) with loose jaws and accessories. Auction-ID: A1-45979-46

A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible.

Speed: from 35 to 3000 rpm Spindle passage: approx. 45 mm Center length: approx. 600 mm Center height above bed: approx. 180 mm Turning diameter over bed: approx. 360 mm Center height above support: 130 mm Turning diameter over support: approx. 260 mm The machine is equipped with a tailstock, a lathe steel holder and a three-jaw chuck from the manufacturer RÖHM, diameter: 160 mm and a two-axis digital display from the manufacturer FAGOR Auction-ID: A7-46287-75

Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement.

Manufacturer: Nexturn Model: SA-20D Year of Manufacture: 2008 Machine Hours - Control ON Time: 36,985 hours - Automatic Running Time: 23,697 hours - Feed Time: 17,438 hours - Total Parts Produced: 1,188,215 Recent Maintenance & Overhauls - Sub-spindle replaced approximately 2 years ago including spindle bearings and sealing air - system retrofit - Y-axis fully overhauled in autumn 2025 (bearings and ball screw replaced) - X2-axis overhauled approximately 3 years ago Included Accessories - Loading magazine with additional channels - Various collets for main spindle and sub-spindle - Various guide bushings - Chip conveyors Find more here - / Contact us at -

Works perfectly The frame is supplied with the hardware Set of gouges supplied with the lathe Auction-ID: A3-43519-36014

Machine 1 - Manufacturer: Tornos - Type: DECO 10mm - Control: Fanuc ITA - Year of Manufacture: 2000 - Loading Magazine: LNS Tryton 112 - Electrically and mechanically overhauled: October 2018 Machine 2 - Manufacturer: Tornos - Type: DECO 10mm - Control: Fanuc ITA - Year of Manufacture: 2003 - Loading Magazine: LNS Tryton 112 Machine 3 - Manufacturer: Tornos - Type: DECO 7mm - Control: Fanuc ITA - Year of Manufacture: 1999 - Machine Number: T-63034 - Loading Magazine: LNS Tryton 112 - Electrically and mechanically overhauled: June 2019 General Condition - All machines are fully functional with no technical defects - All machines are currently running in a medical device production line Find more here - / Contact us at -

Consisting of: (1x) Clamping plate, (1x) carriage/guide seat and 4-jaw chuck. Auction-ID: A1-45979-47

Offered is a precision lead and feed screw lathe: Center distance: approx. 1000mm, center height: 180mm, swing diameter over bed: 360mm, spindle bore: 35mm, spindle mount: D1-3 Camlock, spindle taper: MK5 (MT5), speed steps: 12 speeds, speed range: approx. 40-1800rpm, longitudinal feeds: 0.05-0.7mm/rev, cross feeds: 0.02-0.4mm/rev, metric threads: 0.4-7.0mm, inch threads (Whitworth): 4-56threads/inch. Inspection possible by appointment.

Center width: 750 mm Turning diameter over bed: approx. 300 mm Turning diameter over support: approx. 190 mm Bar passage: approx. 40 mm incl. three-jaw chuck, diameter: approx. 155 mm Auction-ID: A7-46287-25

Inv. Num. : 9058 Type: SPV 40 CNC Producer: CZ. TECH Created: 2008 Parameters: Control system: SIEMENS Table diameter: 533 mm Feed length X-axis: 550 mm Feed length Z-axis: 850 mm Max. turning diameter: 850 mm Max. workpiece height: 800 mm Max. workpiece weight: 800 kg Weight: 12500 kg

Stored in working condition, with digital reading with material cabinet. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17024

Parallel Lathe SCULFORT type MAXICAP 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

Center width: approx. 500 mm Turning diameter over bed: approx. 260 mm Turning diameter over support: approx. 60 mm Bar passage: approx. 25 mm Auction-ID: A7-46287-26

Spindle nose: Camlock D1-6, Machine equipped with: (1x) Sony digital readout, Type: LG10-2 with X and Y readout, (3x) chuck, (1x) tailstock. Auction-ID: A1-45979-100

Serial number: 4659 Max. turning length: approx. 200 mm Turning diameter over support: 60 mm Turning diameter over bed: 110 mm Incl. manual rod feeder and workbench with stock of machine accessories such as collets as well as various holders, turning steels, open-end wrenches and inserts Auction-ID: A7-46287-24

Stored in working condition, buyer must provide transport himself. Elevator available to charge it. Auction-ID: A3-43519-17022

An old, compact precision turret lathe Boley & Leinen is available. Speed: 4000rpm, tool stations: 6, center height: 90mm, distance between centers: 300mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1500mm, weight: approx. 500kg. An on-site inspection is possible.

Automatic lathe Genini ROTOUR 100 CE Max working length 300 mm Max turning diameter round Ø 140 mm, square 100×100 mm 15hp spindle motor Shank Speed 2050-2800-4100-5600rpm 3HP Pump Motor 0.5hp grinder motor CE mark

Technical Specifications Height of the tips: 500 mm Center spacing: 6000 mm Maximum turning diameter on bench: 1000 mm Maximum turning diameter on carriage: 310 mm Bar passing: 150 mm Accessories: Rapid feed on carriage ; Fixed steady rest ; Platform Item sold in unverified status Auction-ID: A1-44614-12

Circumferential diameter over bed ... 840mm Turning length ... 2750mm Max.workpiece weight ... 6000kg Circumferential diameter via support ... 530mm Spindle bore... 82mm Spindle speed ... 7-900 rpm The machine is in good condition, possible to test under power.

Auction-ID: A7-46309-31

Technical Specifications Pole height: 102 mm Center spacing: 450 mm Maximum turning diameter on bench: 200 mm Maximum turning diameter on carriage: 120 mm Bar passing: 25 mm Spindle: 50 - 5000 rpm; 3 kW Tailstock: CM 2 Tailstock sleeve diameter: 30 mm Tailstock sleeve stroke: 80 mm Tool Holder: MULTIFIX Approximate dimensions: 1500 x 510 x 1550 mm Item sold in unverified status Auction-ID: A1-44614-11

Year of manufacture: 1994 / overhauled: 2025 Circumferential diameter over bed ... 630mm Turning length ... 2000mm Circumferential diameter via support ... 340mm Main engine power ... 7.5kW L x W x H ... 4000 x 1400 x 1520mm Machine weight ... 2960kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

Year of manufacture: 1979 / overhauled: 2024 Circumferential diameter over bed ... 710mm Turning length... 2000mm Max. workpiece weight ... 850kg Circumferential diameter via support ... 420mm Spindle speed ... 10-1000 rpm Main engine power ... 7.5kW Machine weight ... 3000kg L x W x H ... 4000x1440x1560mm The machine is in very good condition - after the general overhaul. More info on request. Viewing is possible at our warehouse in Brno.

Year of manufacture: 1978 / overhauled: 2024 Circumferential diameter over bed... 710mm Max. workpiece length ... 4000mm Circumferential diameter via support ... 420mm Spindle speed ... 90-1000 rpm L x W x H ... 6000x1440x1560mm Machine weight ... 3500kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

Key data: 840 mm, 3000 mm, 490 mm

Circumferential. over bed 840 mm, over cross slide 490 mm Center width 3000 mm Speed range 10-1250 rpm, spindle nose DIN 55022 Gr. 11 Spindle bore 105 mm Feeds 0.060 - 1.4 mm // 0.024 - 0.518 mm Thread metric 1 - 224 mm Drive power 18.5 kW Quill path / cone 220 mm / MK 6 incl. Hardened and ground bed guides, electromagnetic brake of the main spindle mechanically driven upper support, rapid traverse longitudinal/transverse Multifix steel holder, fixed bezel 2-axis digital display,

Key data: 330 mm, 850 mm, 190 mm

Circumferential diameter over bed / support 330 / 190 mm Center width 850 mm Bore 36 mm Speed range 60 - 2400 1/min Tailstock quill MK 3 / stroke 100 mm incl. accessories: 4-fold holder, chip back panel, T-slots in cross support Tightening tube for collets (New machine was designed according to DIN 8605)

Key data: 500 mm, 1000 mm

Circumferential diameter over bed 500 mm, over support 290 mm Center width 1000 mm Speed range 1-3000 1/min, spindle nose bayonet Gr 8 Spindle bore 70 mm Tailstock quill MK 5 / stroke 160 mm incl. Control MTC K, Face Plate Fixed bezel with rolling heads Steel holder head system Multifix C with 1 cassette Coolant Setup

A lathe Spinner requiring repair is available. Travel X/Z: 96mm/245mm, max. turning length: 245mm, max. swing diameter: 120mm, turning diameter over bed: 290mm, spindle bore: 42mm, speed: 6000rpm, rapid traverse: 15m/min, tool stations: 12, tool holder: VDI16, bar passage: 42mm. Machine dimensions X/Y/Z: approx. 4400mm/1200mm/2200mm, weight: approx. 3000kg, control: Siemens Sinumerik ShopTurn. Including bar feeder and drawer contents. The machine has the following problems: high measuring inaccuracy, problems with the handwheel and measuring arm as well as measurement deviation. Documentation available. An on-site inspection is possible.

Key data: 2020 mm, 1600 mm, 350000 mm

Stock number: 4023 LATHE Manufacturer: SKODA, Type: SUT 200 TD x 35000 Machines NO.: ob22780, Year of manufacture: 1984 Specifications: Turning length 35000 mm Turning over transverse slides 1600 mm Ø Gr. turning diameter 2020 mm Max. weight in quill 63000 Kg Spindle Motors Power 2 x 82 kW Total power 2x150 kw kW Accessories: Querschlitte 2 x ( Double ) Universal chuck 2 x 2000 mm mm Ø Rotating bezel 6 Fixed bezel 5 + 2 mm Ø Tailstock 2 x Machine needs be to rebuild - with new control Length: 45,200 mm, Height: 3000, Width: 3500 mm, Weight: 150,000 kg

turning diameter over bed: 630-640 mm turning diameter over slide rest: ca 380 mm turning length: ca 2000-4000 mm total power requirement: 15 kW weight of the machine ca.: 7-8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EXTRON 7-HK metal lathe ; equipped with longitudinal and transverse feed and suitable for threading; A-quality lathe; Voltage: 230 volts ; Between centers: 760 mm ; Turning diameter: 289 mm ; Over support: 180 mm ; Diameter: 28 mm ; Speed: 60–1700 rpm ; With 3-jaw with inner and outer jaws Auction-ID: A1-45170-22

HUVEMA HU 360 VA lathe ; frequency-controlled with foot brake and digital readout; professional universal lathe suitable for metalworking ; Voltage: 380 volts ; Between centers: 1000 mm ; Max. turning diameter: 356 mm ; Max. speed: 3000 rpm ; Diameter: 38 mm ; Tailstock: MK-3 ; With Bison 3-claw ; Weight approx. 1350 kg ; Auction-ID: A1-45170-13

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran spanentransportband De staafaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tooleye Mayfran spaanband De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran chiptransporteur De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

TARGET 410x760 metal lathe ; conventional lathe with automatic feed on longitudinal and transverse and suitable for threading; Voltage: 380 volts ; Power: 6.6 kW ; Between centers: 760 mm ; Max. turning diameter: 410 mm ; Diameter: 52 mm ; Recording: MK-4 ; Speed: 40–2000 rpm ; Foot brake: yes ; Cooling pump: yes ; Occupational health and safety technical: yes; Auction-ID: A1-45170-10

CONTROLS   CNC controls TRAUB TX 8 BASIC FUNCTIONS   number of spindles: 1   number machining units (turrets): 1   number of turrets: 1   live positions: yes   number of c-axes: 1 WORKING RANGE TURNING   swing diameter (max): 450 mm   turning diameter (max): 350 mm   bar diameter (max): 60 mm   worpiece length max.: 490 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   c-axis: yes TOOL MAGAZINE   number of positions: 12 ELECTRICAL SPECIFICATIONS   total power consumption: 39 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3150 mm   space requirements -front/back-: 2100 mm   total height: 2100 mm   total weight approx.: 4000 kg ATTACHMENTS (TURNING)   tailstock: yes - Machine in good condition Features: - Complete tool holders (very comprehensive) - Includes driven tool hold ...

A conventional center lathe is available. An on-site inspection is possible.

SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel

SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel

Gildemeister Twin 65 Y - RG2Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mmTurning length : 650 mm____________Description:In General:Year of construction:2007Control:Siemens 840 DBar capacity:65 mmTurning diameter:350 mmTurning length:650 mmMain spindle:Technology:Motor spindleSpeed:5,000 rpmPower max.:35 kWTorque max.:370 NmC-axis:0.001Bar capacity:65 mmChuck:Hainbuch Spanntop size 65Clamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:26 kWTorque:290 NmC-axis:0.001Chuck:Hainbuch Spanntop size 65Clamping cylinder:Partial hollow clamping cylinderZ-axis:670 mmX-axis:175 mmTool carrier i (X/Y/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 rpm, 11 kW, 28 NmX-axis:300Y-axis:80 mm ( +/- 40 mm)Z-axis:650 mmTool carrier II (X/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 ...

EMCO Hyperturn 65Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mmTurning length : 800 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:4.0 00 rpmPower (max.):29 kWTorque (max.):250 NmBarcapacity:76 mmSubspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):29 kWTorque (max.):250 NmEjector:PneumaticMovement in Z:800 mmToolcarrier I (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Y/Z:260/100/800 mmEilgang in X/Y/Z:30/12/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Z:210/800 mmEilgang in X/Z:30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 barRawmaterialfeed I:Robotinterface preparedRawmaterialfeed II:Barloaderinterface prepa ...

SMEC SL 3000 BLMYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mmTurning length : 956 mm____________Description:Main Spindle:Chuck:SAMCHULLY HS-12 (12 inch)Spindle Speed (Max.):3,000 RPMSpindle Nose:A2-8Motor Power (Cont./Max):18.5 kW / 26 kWMax. Turning Ø x Turning Length:405 mm x 956 mmTool Carrier (X/Z):Number of Tool Stations:12x BMT65Max. Milling Ø:433 mmTravel (X/Z):245 mm / 1,040 mmRapid Traverse (X/Z):24 m/min / 30 m/minTailstock:Quill Ø:110 mmQuill Stroke:100 mmEquipment/Accessories:Additional Equipment:Tool touch probe (Tool Setter, swiveling)Collision Protection:Turret with Hirth couplingYear of Manufacture:2023Weight:5,600 kg (according to configuration nameplate)Chip Management:Chip conveyorElectrical Connection:380 V / 3PH.PE / 50/60 Hz / 42 kVA::

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-60

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-56