129,523 used machines on RESALE, but how to find them? Machine Search
turning diameter: 220 mm turning length: 250 mm control: SIEMENS SINUMERIK 820 T swing diameter: 380 mm chucking diameter: 250 mm x-travel: 200 mm z-travel: 250 mm spindle turning speed range: bis 4000 U/min rapid travel - longitudinal/face: 15 m/min total power requirement: 27,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,2 x 2,9 x 2,2 m acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2500 mm, 2100 mm, 20000 mm
Max Workpiece Diameter: 2,500 mm (over bed) / 2,100 mm (over carriage) Max Turning Length: 20,000 mm Max Workpiece Weight: 50,000 kg (50 metric tons) Main Motor: SIEMENS (164 kW)
Machine Stanko 166, 6.3 meter DBC. Completely overhauled in 2024. Electric tailstock. Cable guides installed. Machine in like-new condition. Manual available. Dismantling and loading are included in the price. All headstock components are the same as on the DIP 500. An operator who already operates the DIP 500 can easily operate the 166 DIP 600 without retraining. The machine comes complete with two lunettes, a Ø 300-600 and a new Ø600-1050. Work piece maximum diameter: – above bed: 1250mm – above support: 900mm Work piece maximum length: 6300 mm Spindle speed(rpm): 5…214 Max workpiece weight: 10000 kg Motor power: 30 Kw Machine overall dimensions: – length: 10100mm – width: 2320mm – height: 2000mm Machine weight: 25000kg
Inv. Num. : 9006 Type: SK 12 Producer: TOS Created: 1959 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece height: 1000 mm Max. workpiece diameter: 1250 mm Weight: 19500 kg
A CNC compact turning machine Eguro is available. Turning diameter: 350mm, machining diameter: 200mm, turning length: 200mm, speed: 5000rpm, bar capacity: 1inch, travel X/Z: 250mm/250mm, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/1200mm, weight: approx. 1250kg. An on-site inspection is possible.
Inv. Num. : 9028 Type: SK 12 Producer: TOS Created: 1971 Parameters: Equipment: Accessories
working area: 1.000-5.700 mm workpiece diameter: 140-450 mm with swarf conveyor: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible.
vibratory feeder diameter range 3,5-10 mm total screw length 150 mm output - pieces/min 28 head dia. 24 mm max.
Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm -Weight: 87 kg
Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg
Lathe, turning machine, lead screw lathe, lead screw lathe -Manufacturer: Mondiale, lead screw lathe type Celtic 20 -Turning length: 1200 mm -Turning Ø over bed: 440 mm -Turning Ø without bed: 640 mm -Turning Ø over support: 280 mm -Spindle bore: Ø 45 mm -Spindle speeds: 22 - 1000 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. bezel, tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 1120/2230/H1215 mm -Weight: 1276 kg
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm
Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg
Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg
A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026.
tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Sauter, tool changer type 0.5.675.112 from vertical lathe Scherer VDZ 80 DS -Tool turret: Type 0.5.901.012 for max. 12 tools -Servo motor: Siemens type 1FK7063-2AC74-1SB0 -Individual components: see photos -Dimensions: 560/450/H300 mm -Weight: 117 kg
High-precision lathe DMG Mori Wasino G 100/480 Year of Make: 2017 Control: Fanuc COMPACT line Temperature response (cold start): ø 2.0 μm Roundness: 0.5 μm Technical data: Spindle speed: Drive power: Turning diameter: 285mm Turning length: 280mm Bar Passage: 38mm Travels: X-axis: 480mm Z-axis: 285mm Accessories - 3 pcs of powered tools - Package rigid tool holders - Fire extinguishing system - machine only ran under oil - Chip conveyors
Turrets: 2, tool stations: 12, tool holder: VDI 40, max. turning diameter: 320mm, max. swing diameter: 390mm, spindle bore: 61mm, speed: 5000rpm, spindle power: 15kW, travel X/Z: 230mm/430mm, machine dimensions X/Y/Z: 3900mm/2000mm/2900mm, weight: approx. 8600kg. Including robot. Documentation available. On-site inspection is possible.
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg
A vertical large-format vertical turning lathe TOS is available. Turning diameter cross rail support/side support: 1150mm/1000mm, max. workpiece weight: 3000kg, max. workpiece height: 900mm, travel X/Y/Z: 500mm/500mm/750mm, table diameter: 1000mm, max. table torque: approx. 8800Nm, machine dimensions X/Y/Z: approx. 2600mm/2700mm/4000mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Expected to be available from Q3 2026.
Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck, magnetic round chuck -Magnetic clamping plate: permanent magnetic lathe chuck with chuck flange -Recording: MK4 -Clamping surface: Ø 160 mm -Dimensions: Ø 160 x 205 mm -Weight: 9.8 kg
Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg
Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: VDF Heidenreich Harbeck, lead screw and feed screw lathe type 24R0 -Machine bed: hardened -Turning length: 1230 mm -Rotation diameter over bed: 500 -Turning diameter over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Drive: 5.5 kW -Accessories: 1x bezel, 7x Multifix tool holders, see photos -Dimensions: 1180/3050/H1345 mm -Weight: 1907 kg
Offered is a Traub TND 400. Center distance: 800mm, turning diameter approx. 250mm, travel X/Y approx. 220mm/850mm, spindle bore: 65mm, speed range: 40-4000rpm, 12-position disc turret, tool holder: VDI40 DIN69880, integrated coolant system, dimensions X/Y/Z approx. 3000mm/2000mm/2000mm, weight approx. 4300kg-4500kg. Inspection by appointment possible.
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg
Variabele snelheid met frequentie verzenden Distance between centers: 1000 mm Swing over bed: 402 mm Swing over cross-slide: 380 mm Swing in gap: 560 mm Diametre of main spindle bore: 42 mm Power on main spindle: 4 kW Number of speeds: 40 > 2800 rpm Digital screen: yes Length: 2390 mm Width : 910 mm Height: 1625 mm Weight: 1190 kg
Key data: 800 mm, 4000 mm, 710 mm
Description, subject to prior sale. Conventional lathe Make: Trens (former TOS Trencin) Digital read-out Swing over bed 710 mm Swing up to 800 mm Distance between centres 4000 mm In good working condition. Machine can be inspected under power in German factory. Availability short-term. Further information, price, videos on request. Technical indications, subject to error.
Manufacturer: Mazak Model: Integrex 100-4 Year of Manufacture: April 2006 Machine Weight: 6,000 kg Find more here - / Contact us at -
Manufacturer: Biglia Model: B501 M Year of Manufacture: 1996 Type of Machine : Lathe CNC Control: GE Fanuc 0-T Turning Capacity - Maximum turning length: 500 mm - Maximum diameter over the bed: 520 mm - Maximum workpiece diameter: 68 mm - Maximum diameter per pass: 250 mm Spindle Specifications - Spindle bore: 80 mm - Spindle motor: 22 kW - Maximum spindle speed: 4000 rpm Axis Travel X-axis travel: 2105 mm Z-axis travel: 500 mm C-axis minimum programmable step: 0.001 degrees High-speed traverse: up to 80 rpm Turret and Tooling - Turret positions: 12 - Motorized tool positions: 6 - Motorized tool speed range: 50 to 3000 rpm - Motorized tool motor: 3.7 kW - Tailstock - Tailstock travel: 100 mm (automatic) - Tailstock taper: CM4 - Additional Equipment Included - Autoblok 210 BB chuck with hardened jaws - Filtermist FI4/8 fume extractor - Chip conveyor Machine Dimensions and ...
Manufacturer: Pinacho Model: SP/250 Machine Type:Lathe Year of Manufacture: October 2002 CE marked Find more here - / Contact us at -
BERNARDO Super 180 universal lathe was built in Austria by PWA Handelsgesellschaft m.b.H. The machine on offer is an excellent choice for both unit and small batch production. It is capable of performing operations such as turning cylindrical, conical and end faces, as well as cutting metric and inch threads. Workpieces with a maximum diameter of 506 mm and a length of 1000 mm are machined by means of a reliable spindle, rotating within a range from 45 rpm to 1800 rpm. As many as 16 spindle speed adjustment stages enable precise adjustment of the cutting speed to the type of workpiece and the type of machining. The BERNARDO Super 180 also offers a wide range of longitudinal and transverse feeds. The installed digital readouts further enhance operator comfort. All this is complemented by an extremely rigid bed that perfectly dampens any vibrations and ensures maximum process stability dur ...
General: Max. workpiece diameter: 140 mm Chuck diameter: 250 mm Max. turning length: 700 mm Gauge I: Tool carrier I: Tool turret (X/Z) Tool drive: 9,600 rpm, 44 Nm Tool holder: BMT Number of stations: 11 + 1 part gripper X-axis: 310 mm Z-axis: 1,115 mm Displacement measuring systems (X/Z): Direct (glass scales) Sub-spindle (OP20): motor spindle Speed: 5,000 rpm Power: 33.9 kW Torque: 231 Nm Lining: 2+2 jaw power chuck Clamping Cylinder: Full Clamping Cylinder, Hydraulic C-axis: 0.01° Gauge III: Tool carrier II: Tool turret (X/Y/Z) Tool drive: 9,600 rpm, 44 Nm Tool holder: BMT Number of stations: 11 + 1 part gripper X-axis: 620 mm Y-axis: 50 mm (+ 22/ - 28 mm) Z-axis: 1,115 mm Displacement measuring systems (X/Z): Direct (glass scales) Gauge IV: Main spindle (OP30): Movable motor spindle Speed: 5,000 rpm Power: 33.9 kW Torque: 231 Nm Lining: Co ...
Offered is a lead and feed screw lathe: Distance between centers: 1000mm, Center height: 250mm, Swing diameter over bed: 500mm, Speed range: 7.1-1400rpm, Extensive feed gearbox for longitudinal and cross feeds, Inspection by appointment possible
A precision lathe is offered: distance between centers: 1500mm, center height: 265mm, swing diameter over bed: 530mm, speed range: infinitely variable up to 2000rpm. Machine dimensions X/Y/Z: approx. 2700mm/850mm/1400mm, weight: approx. 2100kg. The brake has a problem. Inspection possible by appointment.
CONTROLS CNC controls MAZATROL 640 T NEXUS WORKING RANGE TURNING turning diameter (max): 380 mm bar diameter (max): 65 mm worpiece length max.: 575 mm MAIN SPINDLE spindle revolutions (max): 5000 /min drive power: 26 kW COUNTER SPINDLE spindle revolutions (max): 6000 /min drive power: 11 kW X/Z SLIDE Z-axis travel: 575 mm X-axis travel: 230 mm Y-axis travel: 585 mm number of tool positions (total): 12 - rotation speeds (max): 4500 /min - drive power: 5.5 kW Additional options• Kitagawa BB-08 3-jaw chuck• Kitagawa B-206 3-jaw chuck• Parts catcher• Interface for bar feeder• Tool holder package, including driven holders• Coolant pump• Chip conveyor
Manufacturer: INDEX Model: INDEX ABC Year of Manufacture: 1997 - With bar feeder and chip removal Electrical Specifications - Power Supply: 3-phase, 50 Hz - Rated Voltage: 400 V - Control Voltage: 24 V - Rated Current: 32 A Synchronous Spindle - Collet Clamping - Max. torque (Md max. 25%): 10 Nm - Max. speed: 4500 rpm - Max. collet diameter: 42 mm - Clamping depth at max. collet diameter: 38 mm - Spindle bore diameter: 15.5 mm - Max. ejector stroke: 36 mm - Max. clamping pressure: 65 bar Synchronous Spindle - Chuck Clamping - Max. torque (Md max. 25%): 10 Nm - Max. speed: 4000 rpm - Max. chuck diameter (external): 75 mm - Max. ejector stroke: 42 mm - Max. jaw stroke: 0.6 mm - Max. clamping pressure: 20 bar Rear Tool Carrier for Backworking Operations - Capacity: up to 5 fixed tools - Capacity driven tools: up to 3 fixed and 2 driven tools - Max. speed (driven tools): 6000 rpm ...
Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.
Chuck diameter: 315mm, turning length: 1600mm, swing over bed: 560mm, swing over cross slide: 370mm, control panel: Heidenhain. An on-site inspection is possible.
Connected load: 10kW, control: FANUC Series 0-T, machine type: slant bed lathe. With transformer, hydraulic unit and electrical cabinet with main switch. An on-site inspection is possible.
Chuck diameter: 400mm, turning length: 1000mm, swing over bed: 700mm, swing over cross slide: 400mm, control panel: TRAK 102. An on-site inspection is possible.
Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 560mm, swing over cross slide: 320mm, control panel: Heidenhain. An on-site inspection is possible.
Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.
Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg
Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45834-256
WEILER COMMODOR L&Z Spindle Lathe -Turning length 1000mm -Turning diameter max. 160mm Bar Passage 56mm -Speed range 25-2000 rpm -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 Hjbkn Au Ssun Ulhs Tsl -Three-jaw chuck approx. 250mm -Multifix base holder with insert -Coolant device -Electric lining protection -Swarf back wall -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg
Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45833-327
Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45834-327
maximum number of results exceeded
please refine your search
107 € 
