om vertical lathe used for sale

This 3-axis CHIRON FZ 12 S High speed was manufactured in 1996. It features an X-axis travel of 550 mm, Y-axis travel of 330 mm, and Z-axis travel of 425 mm. The machine has a spindle speed of 12,000 rpm and a tool capacity of 12 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 12 S High speed vertical machining centre we have for sale. Contact us for further details.

This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and Y-axis travel of 500 mm, providing versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the EMCO MC 75-50 vertical machining centre we have for sale. Contact us for further details.

equipped with filling pipe, wicket door, drawings available, Please note! Pick up by appointment Auction-ID: A1-43992-272

This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine is equipped with a side mount tool changer with a capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details.

This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details.

This 3-axis MIKRON VF 3 vertical machining center was manufactured in 1998. It features a table size of 460 × 1,220 mm, with X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VF 3 machine we have for sale. Contact us for more information.

This 5-axis Matsuura MAM 72-63 V was manufactured in 2008. It features impressive travels with an X-axis of 760 mm, Y-axis of 845 mm, and Z-axis of 610 mm. The machine includes a maximum workpiece capacity of Ø800 mm × 450 mm height and a tool magazine with 150 positions. If you are looking to get high-quality machining capabilities, consider the Matsuura MAM 72-63 V vertical machining centre we have for sale. Contact us for further details.

This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details.

This 5-axis DMG DECKEL MAHO DMU 80P duoBLOCK was manufactured in 2009. It features impressive axis travels with X-axis at 800 mm, Y-axis at 1050 mm, and Z-axis at 850 mm. The machine includes a robust table size of Ø 900 × 700 mm and a maximum workpiece weight capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 80P duoBLOCK vertical machining centre we have for sale. Contact us for further details.

This 3-axis Akira Seiki RMV 700 APC was manufactured in 2013. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 700 mm x 400 mm with a maximum load capacity of 160 kg. If you are looking to get high-quality machining capabilities, consider the Akira Seiki RMV 700 APC vertical machining centre we have for sale. Contact us for further details.

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details.

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

This 5-axis FANUC Robodrill alpha-T21iFL was manufactured in 2008. It features impressive X, Y, and Z travels of 700 mm, 400 mm, and 330 mm respectively, along with a spindle speed of 24,000 rpm. The machine offers a maximum feed rate of 54,000 mm/min and can accommodate a workpiece diameter of up to 300 mm on a 5-axis table. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill alpha-T21iFL vertical machining centre we have for sale. Contact us for more information about this machine.

This 3-axis Rambaudi RF103 was manufactured in 2008. It features a maximum spindle speed of 18,000 rpm and a robust table size of 1,900 x 1,200 mm. The machine includes a tool changer with 24 positions, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Rambaudi RF103 vertical machining centre we have for sale. Contact us for further details.

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

This 3-axis DART VMC650 XL/A T.S was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1000 × 500 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the DART VMC650 XL/A T.S vertical machining centre we have for sale. Contact us for further details.

This 4-axis FANUC Robodrill alpha-T21iFL was manufactured in 2008. It features impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine is capable of a spindle speed of 24,000 rpm and a maximum feed rate of 54,000 mm/min. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill alpha-T21iFL vertical machining centre we have for sale. Contact us for further details.

x-travel:800 mm y-travel:400 mm z-travel:350 mm total power requirement:44 kW weight of the machine ca.:8,8 t dimensions of the machine ca.:6,1 x 4,1 x 3,3 m tool taper:HSK63 number of spindle speeds:36-12.000 Number of tools:2 x 21 St. rotary table diameter:1340 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

This 3-axis FAGIMA FAST 160 was manufactured in 1999. It features an X-axis travel of 1600 mm, Y-axis travel of 700 mm, and Z-axis travel of 700 mm. The machine includes a table size of 1800 × 700 mm with a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the FAGIMA FAST 160 vertical machining centre we have for sale. Contact us for further details.

weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine

This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1300 x 570 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Johnford SV-41 was manufactured in 2010. It features a maximum spindle speed of 15,000 rpm and a work envelope of 1050 x 610 x 510 mm. The machine is equipped with a 40 taper for versatile tooling options. If you are looking to get high-quality machining capabilities, consider the Johnford SV-41 vertical machining centre we have for sale. Contact us for further details.

max. wheel diameter:130 mm gear width:170 mm max. module:3 min. module:0,5 total power requirement:48 kVA weight of the machine ca.:9 t dimensions of the machine ca.:7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed

This 3-axis DECKEL DMU 60 E was manufactured in 1998. It features a spindle speed of 12,000 rpm and an impressive X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine includes a fixed angle table with a clamping surface of 1000 x 542 mm and a 25-position double gripper tool changer. If you are looking to get high-quality machining capabilities, consider the DECKEL DMU 60 E vertical machining centre we have for sale. Contact us for further details.

This 3-axis MAKA DC 3 was manufactured in 2016. It features a spindle speed range of 18,000 rpm and impressive axis travels of 1645 mm in the X-axis, 1760 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a table size of 1200 x 1400 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the MAKA DC 3 vertical machining centre we have for sale. Contact us for further details.

turning diameter:250 mm swing diameter:250 mm turning height:200 mm total power requirement:37,7 kW chuck diameter:315 mm spindle speed max.:5500 1/min travel -x axis:625 mm travel -y axis:+100/-80 mm travel -z axis:250 mm worktool system:VDI 30+40 weight of the machine ca.:8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.

This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2006. It features an X-axis travel of approximately 635 mm and operates on a supply voltage of 400 V, 3-phase. With a rated power of 35 kVA, this vertical machining centre is designed for efficient performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details.

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024

This 3-axis DAH LIH MCV2600 was manufactured in 2006. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 870 mm, and Z-axis travel of 760 mm. The machine includes a robust table size of 2800 x 970 mm and a maximum speed of 6000 rpm. If you are looking to get high-quality machining capabilities, consider the DAH LIH MCV2600 vertical machining centre we have for sale. Contact us for further details.

max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024

This 5-axis DECKEL MAHO DMU 80 MonoBLOCK vertical machining center was manufactured in 2005. It features a 16,000 rpm spindle speed, a 40-slot tool changer, and an SK 40 tool holder. Equipped with an NC rotary table, a controlled B-axis in the milling head, and a chip conveyor, this machine is ideal for complex machining tasks. The DECKEL MAHO DMU 80 MonoBLOCK we have for sale is a robust choice for precision engineering. Contact us for more information.

This 3-axis Enshu S400 was manufactured in 1996. It features a working surface of 900 x 450 mm and a maximum workpiece weight of 800 kg. The machine is equipped with a spindle taper of MAS BT-40 and a tool magazine capacity of 20 slots. If you are looking to get high-quality machining capabilities, consider the Enshu S400 vertical machining centre we have for sale. Contact us for further details.

turning diameter:1000 mm swing diameter:1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed range I: 5 - 350 rpm. Speed range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urh ...

This 3-axis KUNZMANN BA1400 was manufactured in 2017. It features a powerful 28 kW motor and a Heidenhain TNC 640 control unit. The machine has a table size of 1400 x 710 mm and can handle a maximum workpiece weight of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KUNZMANN BA1400 vertical machining centre we have for sale. Contact us for further details.

This 5-axis PROMAC ZEPHYR VT 2.5 XL was manufactured in 2015. It features an impressive X-axis travel of 2500 mm, Y-axis travel of 2200 mm, and Z-axis travel of 1100 mm. The machine is equipped with a HEIDENHAIN CNC control and has a maximum spindle speed of 20,000 rpm. If you are looking to get high-quality machining capabilities, consider the PROMAC ZEPHYR VT 2.5 XL vertical machining centre we have for sale. Contact us for further details.

max. wheel diameter:900 mm max. module:10 weight of the machine ca.:8200 kos. hob dia. - max.:190 mm cutter length max.:320 mm milling spindle speeds (infinitely variable):13-80 U/min workpiece length - max.:750 mm max. workpiece diameter:150 mm Counter holder milling mandrel is missing

This 3-axis HAAS VF-4SS was manufactured in 2014. It features impressive travels of 1270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine is equipped with a powerful 30 hp spindle, capable of reaching speeds up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details.

This 4-axis Matec 30 HV CNC was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV CNC vertical machining centre we have for sale. Contact us for further details.

This 3-axis HEDELIUS C60 - 2000 vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the HEDELIUS C60 - 2000 machine we have for sale. Contact us for further details.

This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details.

This 3-axis Okuma MB66-VA was manufactured in 2010. It features a travel of 1500 mm on the X-axis, 660 mm on the Y-axis, and 660 mm on the Z-axis. The machine has a table size of 1530 x 660 mm and a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the Okuma MB66-VA vertical machining centre we have for sale. Contact us for further details.

This 3-axis Sure First QM-1836 was manufactured in 2011. It features a table dimension of 1800 x 1200 mm and impressive axes strokes of 1800 x 1300 x 600 mm. The machine has a maximum rotation speed of 15000 rpm and a forward speed of 20000 mm/min. If you are looking to get high-quality machining capabilities, consider the Sure First QM-1836 vertical machining centre we have for sale. Contact us for further details.

max. wheel diameter:300 mm max. module:7 weight of the machine ca.:15 t table turning speeds:100 U/min table diameter:180 mm hob turning speeds:750 U/min max. hob diameter:300 cutter length max.:230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion

This 3-axis AXA VSC-1-M/C was manufactured in 1997. It features an X-axis travel of 2240 mm, Y-axis travel of 420 mm, and Z-axis travel of 480 mm. The machine is equipped with a Heidenhain CNC TNC 407 control system and has a tool changer capacity of 22 tools. If you are looking to get high-quality machining capabilities, consider the AXA VSC-1-M/C vertical machining centre we have for sale. Contact us for further details.

roll diameter:420 mm throat:400 mm workpiece height:325 mm table surface area:615 x 615 mm table swivelabel +/-:10/45 ° table - inclinable:+/- 20 ° cutting speed:20 - 2500 m/min total power requirement:2 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,95 x 0,65 x 1,83 m

This 5-axis EMCO MAXXMILL 350 was manufactured in 2017. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine with 50 positions. If you are looking to get high-quality machining capabilities, consider the EMCO MAXXMILL 350 vertical machining centre we have for sale. Contact us for further details.

pulling force - max.:2,5 t max. ram stroke:1000 mm max. workpiece diameter:40 mm Broaching speed:60 m/min. return speed:20 m/min. total power requirement:24 kW weight of the machine ca.:6 t dimensions of the machine ca.:1,7 x 2,4 x 4,77 m clamping plate:320 mm It is a hydraulic machine.

This 3-axis HAAS VF-10/50HE vertical machining centre was manufactured in 2011. It features a generous X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 760 mm. The machine is equipped with a robust table size of 3000 x 800 mm and a maximum load capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50HE machine we have for sale. Contact us for further details.

This 3-axis TBI MVC 1890 was manufactured in 2013. It features a robust cast iron body, cross-slide table design, and slideway guides on all axes for enhanced rigidity and precision. Key specs include a Heidenhain CNC control, SK40 spindle taper, and a maximum spindle speed of 12000 rpm. It also boasts a 24-position automatic tool changer and integrated chip conveyor. Consider the opportunity to buy this TBI MVC 1890 vertical machining centre. Contact us for more information.