om vertical lathe used for sale

This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details.

This 3-axis MIKRON VF 3 vertical machining center was manufactured in 1998. It features a table size of 460 × 1,220 mm, with X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VF 3 machine we have for sale. Contact us for more information.

Key data: 1000 mm, 500 mm, 500 mm

Inv. Num. : 6776 Type: VOC 1000 Produzent: INTOS Erzeugt: 2003 Parametern: Steuerungssystem: SIEMENS Sinumerik Arbeitstischlänge: 1100 mm Arbeitstischbreite: 500 mm Maximale Drehzahl der Spindel: 8000 1/min Verfahrwege X-Achse: 1000 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 500 mm Spindelleistung: 25 kVA Kegel: SK 40 Anzahl der Stapelpositionen: 20 Stücke Maschinengewicht: 4619 kg

This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine.

Key data: 1020 mm, 510 mm, 610 mm

Inv. Num. : 6222 Type: BMC 4020 Producer: HURCO Created: 2000 Parameters: Control system: UNIMAX Operating hours: 59,600 h Work table length: 1220 mm Work table width: 510 mm Minimum vertical spindle speed: 80 1/min Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Spindle power: 15 kW Maximum tool weight: 682 kg Max. tool weight: 7 kg Machine height: 2670 mm Machine length: 3350 mm Machine width: 2320 mm Machine weight: 5600 kg Equipment: Tool clamping 2015: Spindle change

Key data: 1300 mm, 540 mm, 720 mm

Inv. Num. : 6148 Type: CFV 1300i Producer: Cincinnati Created: 2010 Parameters: Control system: Heidenhain iTNC 530 Hours: 59260 h Duty cycle: 26295 h Work table length: 1370 mm Work table width: 610 mm Tool magazine: 24 pieces Maximum vertical spindle speed: 9000 1/min X-axis travel: 1300 mm Y-axis travel: 540 mm Z-axis travel: 720 mm Cone: SK 40 Equipment: IKZ Conveyor New spindle 24x clamping tools 4x Hydro Vise

This 5-axis Matsuura MAM 72-63 V was manufactured in 2008. It features impressive travels with an X-axis of 760 mm, Y-axis of 845 mm, and Z-axis of 610 mm. The machine includes a maximum workpiece capacity of Ø800 mm × 450 mm height and a tool magazine with 150 positions. If you are looking to get high-quality machining capabilities, consider the Matsuura MAM 72-63 V vertical machining centre we have for sale. Contact us for further details.

Key data: 1800 mm, 850 mm, 800 mm

Inv. Num. : 6502 Type: FTV 850 Producer: Cincinnati Created: 2002 Parameters: Control System: Acramatic Work table length: 2300 mm Work table width: 900 mm Tool magazine: 36 pieces X-axis travel: 1800 mm Y-axis travel: 850 mm Z-axis travel: 800 mm Spindle power: 42 kW Machine height: 3800 mm Machine length: 7200 mm Machine width: 3500 mm Machine weight: 17000 kg Equipment: Technical Documentation 40x Tool Holder 1x D100 cutter

This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Consider the opportunity to buy this HAAS UMC-750SS vertical machining center. Contact us for more information.

This 5-axis RÖDERS RXU 1001 DSH was manufactured in 2016. It features a machining range of 800 mm × 855 mm × 500 mm and a maximum workpiece weight of 800 kg. The machine is equipped with a milling spindle that operates at 24,000 rpm and includes a tool changer for 24 tools. If you are looking to get high-quality machining capabilities, consider the RÖDERS RXU 1001 DSH vertical machining centre we have for sale. Contact us for further details.

Key data: 1050 mm, 510 mm, 560 mm

Inv. Num. : 5759 Type: SVM 105 Producer: LILIAN Created: 2013 Parameters: Control System: Fanuc Oi-MC Operating hours: 23000 h Spindle hours: 5081 h Work table length: 1200 mm Work table width: 500 mm Maximum table load (uniform): 650 kg Tool magazine: 32 pieces Speed: 60-8000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 560 cm Cone: BT40 Max. tool weight: 6 kg Main motor power: 11/15 kW Machine height: 2558 mm Machine length: 3050 mm Machine width: 2319 mm Machine weight: 5200 kg Equipment: Conveyor IKZ

Key data: 760 mm, 430 mm, 450 mm

Inv. Num. : 6921 Type: VMCF-760 Producer: Microcut Created: 2007 Parameters: Control system: Fagor 8055 MC Work table length: 900 mm Work table width: 410 mm X-axis travel: 760 mm Y-axis travel: 430 mm Z-axis travel: 450 mm Cone: ISO 40 Machine weight: 3,300 kg

Control Fanuc ... 31i - B5 Clamping table surface ... 850x410mm Axis X ... 700mm Axis Y ... 400mm Axis Z ... 330mm Spindle speed ... 0-24000/min. controlled axes ... 5 cooling ... 35bar Spindle mounting... BBT30. Rapid traverse ... 54m/min Main engine power ... 4.7/14.2kW Max. table load ... 300kg L x W x H ... 2100x2165x2800mm Machine weight ... 2300kg Magazine slots ... 21 + Robot FANUC LR Mate 200iD The machine is in good condition, possible to test under electricity.

This 3-axis RÖDERS RHP 500 vertical machining centre was manufactured in 2007. It features a machining range of 500 mm × 552 mm × 300 mm and a table size of 600 mm × 540 mm. The machine is equipped with a milling spindle that reaches up to 42,000 rpm and has a tool changer with 42 places. If you are looking to get high-quality machining capabilities, consider the RÖDERS RHP 500 machine we have for sale. Contact us for further details.

This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details.

Key data: 750 mm, 500 mm, 600 mm

Inv. Num. : 7098 Type: DBZ Producer: AXA Created: 2008 Parameters: Control system: Heidenhain iTNC53O Duty cycle: 57676 h Hours: 23680 h Work table length: 1000 mm Work table width: 500 mm Maximum table load (even): 800 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 2x 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Maximum tool diameter: 85 mm Max. tool weight: 8 kg Max. tool length: 400 mm Number of stacking positions: 22 pieces Machine height: 3550 mm Machine length: 4460 mm Machine width: 2250 mm Machine weight: 12000 kg Equipment: Chip conveyor 300m Suction Showa CRD-1500RA-CE-0043 Preparation for the 4th axis

This 3-axis Akira Seiki RMV 700 APC was manufactured in 2013. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 700 mm x 400 mm with a maximum load capacity of 160 kg. If you are looking to get high-quality machining capabilities, consider the Akira Seiki RMV 700 APC vertical machining centre we have for sale. Contact us for further details.

This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details.

Dart VMC 650 XL/A twin speed vertical machining center ::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 18 - M Tool holder: ISO 40 Spindle power: 11Kw Spindle speed: 8000 Number of tools: 24 X-axis stroke: 800mm Y-axis stroke: 500mm Z-axis travel: 610mm Rapid feeds for linear axes X Y Z: 30m/min Table size: 1000 x 500mm Table capacity: 400Kg Guides: roller High refrigerant pressure: yes Chip conveyor: belt conveyor

This 3-axis Rambaudi RF103 was manufactured in 2008. It features a maximum spindle speed of 18,000 rpm and a robust table size of 1,900 x 1,200 mm. The machine includes a tool changer with 24 positions, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Rambaudi RF103 vertical machining centre we have for sale. Contact us for further details.

This 3-axis DART VMC650 XL/A T.S was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1000 × 500 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the DART VMC650 XL/A T.S vertical machining centre we have for sale. Contact us for further details.

Specifications: Cutting width 500 mm Table size 800 x 820 mm Travel approx. 350 mm Cutting height under guide approx. 400 mm Belt length 4000 mm Infinitely variable speeds approx. Gearbox stage 1 15 – 80 m/min Gearbox Stage 2 75 - 305 m/min Gearbox Stage 3 207 - 944 m/min

Brand: Polyglass Type: Washing machine, Vertical Model: LT1500/LC Rood Chassis number: 1090-PL-05/01 Photos/film available: Photos available Remaining: Small machine

This 4-axis FANUC Robodrill alpha-T21iFL was manufactured in 2008. It features impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine is capable of a spindle speed of 24,000 rpm and a maximum feed rate of 54,000 mm/min. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill alpha-T21iFL vertical machining centre we have for sale. Contact us for further details.

Paventa Speed 3100 moving column machining center ::SPECIFICATIONS::: CNC Model: Selca - CNC Version: 4040R - Tool Holder: ISO 40 - Spindle Power: 15Kw - Spindle Speed: 8000 Number of tools: 30 + 30 - X axis stroke: 3100mm - Y axis stroke: 600mm - Z axis stroke: 600mm - X Y Z linear axis rapid feeds: 15m/min Chip conveyor: belt conveyor

This 3-axis FAGIMA FAST 160 was manufactured in 1999. It features an X-axis travel of 1600 mm, Y-axis travel of 700 mm, and Z-axis travel of 700 mm. The machine includes a table size of 1800 × 700 mm with a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the FAGIMA FAST 160 vertical machining centre we have for sale. Contact us for further details.

This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1300 x 570 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Johnford SV-41 was manufactured in 2010. It features a maximum spindle speed of 15,000 rpm and a work envelope of 1050 x 610 x 510 mm. The machine is equipped with a 40 taper for versatile tooling options. If you are looking to get high-quality machining capabilities, consider the Johnford SV-41 vertical machining centre we have for sale. Contact us for further details.

This 3-axis MAKA DC 3 was manufactured in 2016. It features a spindle speed range of 18,000 rpm and impressive axis travels of 1645 mm in the X-axis, 1760 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a table size of 1200 x 1400 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the MAKA DC 3 vertical machining centre we have for sale. Contact us for further details.

Key data: 1050 mm, 510 mm, 510 mm

Inv. Num. : 7111 Type: NEXUS 510 C Producer: MAZAK Created: 2008 Parameters: Control system: MAZATROL MATRIX NEXUS Duty cycle: 14206 h Hours: 4777 h Work table length: 1300 mm Work table width: 550 mm Spindle drive power: 11 kW Speed: 12,000 rpm X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: ISO 40 Number of stacking positions: 30 pieces Machine weight: 6886 kg Equipment: Tool Probe IKZ

This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2006. It features an X-axis travel of approximately 635 mm and operates on a supply voltage of 400 V, 3-phase. With a rated power of 35 kVA, this vertical machining centre is designed for efficient performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details.

This 3-axis DAH LIH MCV2600 was manufactured in 2006. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 870 mm, and Z-axis travel of 760 mm. The machine includes a robust table size of 2800 x 970 mm and a maximum speed of 6000 rpm. If you are looking to get high-quality machining capabilities, consider the DAH LIH MCV2600 vertical machining centre we have for sale. Contact us for further details.

Inv. Num. : 7105 Type: INNO 810 Producer: MACRO Created: 2011 Parameters: Control system: HEIDENHAIN 530 Work table length: 810 mm Work table width: 410 mm Maximum table load (uniform): 300 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 810 mm Y-axis travel: 410 mm Z-axis travel: 500 mm Maximum feed speed axis X: 3000 mm/min Maximum feed speed axis Y: 3000 mm/min Maximum feed speed axis Z: 3000 mm/min Machine height: 2500 mm Machine length: 3800 mm Machine width: 2000 mm Machine weight: 4000 kg Equipment: Workpiece probe Tool Probe

This 5-axis SPINNER U5-620 was manufactured in 2008. It operates on a supply voltage of 400 V and a frequency of 50/60 Hz, with a nominal current of 50 A. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-620 vertical machining centre we have for sale. Contact us for further details.

This 5-axis DECKEL MAHO DMU 80 MonoBLOCK vertical machining center was manufactured in 2005. It features a 16,000 rpm spindle speed, a 40-slot tool changer, and an SK 40 tool holder. Equipped with an NC rotary table, a controlled B-axis in the milling head, and a chip conveyor, this machine is ideal for complex machining tasks. The DECKEL MAHO DMU 80 MonoBLOCK we have for sale is a robust choice for precision engineering. Contact us for more information.

This 3-axis Enshu S400 was manufactured in 1996. It features a working surface of 900 x 450 mm and a maximum workpiece weight of 800 kg. The machine is equipped with a spindle taper of MAS BT-40 and a tool magazine capacity of 20 slots. If you are looking to get high-quality machining capabilities, consider the Enshu S400 vertical machining centre we have for sale. Contact us for further details.

Used vertical packaging machine by Unipak Gniezno type ASG-1. New 1992. Packs loose materials in heat-sealed foil. Possibility to pack different weights in bags up to 1 kg.

Clocked, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch form, fill and seal machine Machine type: SVB3601R Year of construction: 2000 Clocked form, fill and seal machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeders Machine type: FVS 3091 SQ Products suitable for dosing: -Granules -Powder -Icing sugar -Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch checkweigher Machine type: KWE 5000 Year of construction: 2009 The plant was dismantled and stored due to product changeover. 6 months before the removal of the machine, a lot of investments were made, including the installation of new sealing jaws and a new display. We ...

This 3-axis KUNZMANN BA1400 was manufactured in 2017. It features a powerful 28 kW motor and a Heidenhain TNC 640 control unit. The machine has a table size of 1400 x 710 mm and can handle a maximum workpiece weight of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KUNZMANN BA1400 vertical machining centre we have for sale. Contact us for further details.

Weight: +/- 1,1 tons Power: 15 kW Length mm: 6800 Width mm: 1300 Height mm: 2300 Working height: 400 Transport size L x W x H: 2,5 x 2,4 x 2,3 mtr Maximum speed: 4 m/min Min.-max. glass thickness: 2 - 12mm Min.-max glass size: 2 x 3 Number of brushes: 4 brushes Condition machine : Disassembled in working order Control type: Manually Electric. Connection: 32A 3P+N+PE Photos/film available: Photos and video available Remaining: Left to right / RVS

This 5-axis PROMAC ZEPHYR VT 2.5 XL was manufactured in 2015. It features an impressive X-axis travel of 2500 mm, Y-axis travel of 2200 mm, and Z-axis travel of 1100 mm. The machine is equipped with a HEIDENHAIN CNC control and has a maximum spindle speed of 20,000 rpm. If you are looking to get high-quality machining capabilities, consider the PROMAC ZEPHYR VT 2.5 XL vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VF-4SS was manufactured in 2014. It features impressive travels of 1270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine is equipped with a powerful 30 hp spindle, capable of reaching speeds up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details.

This 4-axis Matec 30 HV CNC was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV CNC vertical machining centre we have for sale. Contact us for further details.

Serial Number: 7880-10 Weight: 2,5 tons Power: 6 kW Air pressure: 6 bar Length mm: 5000 Width mm: 1000 Height mm: 3500 Working height: 70 cm. Transport size L x W x H: 5,0 x 1,0 x 3,5 + 1,1 x 0,8 x 1,35 Maximum speed: 1,6m/min. Min.-max. glass thickness: 50 mm Condition machine : Good Control type: Manually/ semi automatic Electric. Connection: 400 V Documentation: No Instructions: No Electric diagram: No Photos en video available

This 3-axis HEDELIUS C60 - 2000 vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the HEDELIUS C60 - 2000 machine we have for sale. Contact us for further details.

This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details.

This 3-axis Okuma MB66-VA was manufactured in 2010. It features a travel of 1500 mm on the X-axis, 660 mm on the Y-axis, and 660 mm on the Z-axis. The machine has a table size of 1530 x 660 mm and a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the Okuma MB66-VA vertical machining centre we have for sale. Contact us for further details.

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

This 3-axis Sure First QM-1836 was manufactured in 2011. It features a table dimension of 1800 x 1200 mm and impressive axes strokes of 1800 x 1300 x 600 mm. The machine has a maximum rotation speed of 15000 rpm and a forward speed of 20000 mm/min. If you are looking to get high-quality machining capabilities, consider the Sure First QM-1836 vertical machining centre we have for sale. Contact us for further details.

This 3-axis AXA VSC-1-M/C was manufactured in 1997. It features an X-axis travel of 2240 mm, Y-axis travel of 420 mm, and Z-axis travel of 480 mm. The machine is equipped with a Heidenhain CNC TNC 407 control system and has a tool changer capacity of 22 tools. If you are looking to get high-quality machining capabilities, consider the AXA VSC-1-M/C vertical machining centre we have for sale. Contact us for further details.