oli used for sale

Volcanoring MATEC mini The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Volcanosquare MATEC The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

The container is factory-new, enstpricht the German Institute for Standardization 6616, owns 2 saddle feet is emptied inside and cleaned and undercoated outside, incl. rise leaders. D = 2.90 m - L = approx. 16.00 m. the container receives a factory-new Kunststoffinninhuelle - continuously to the storage of liquid fertilizer incl. leaky warning device mounts in the protective box. the plastic inside cover owns a Allgemeine appraisial Zulassung Z-65.30-466 and is therefore for the storage of liquid fertilizer AHL as well as reducing agent NOx from 32 (AdBlue) suitably and admitted. the price gets on ex works - freely charged.

CONTI-WELD COMPRESSOR TYPE LBWT -540 l/m -Tankinhoud 100 l -4 PK -Geluidsarm -Olie-en onderhoudsvrij -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Special offer: Very Special Price for Quick Sale! 6 col W&H Olimpia central drum flexopress reel diam on unwinder and rewinder 1200 mm width 1100 mm if need we will check if more is possible repeat: 300-910 mm gas drying ceramic anilox: 4x200 l/cm, 2x120 l/cm, 2x80 l/cm printing sleeves: For polymers 2.84; For polymers 1.14; 1. 310 - pcs.70 1. 310 - pcs.6 2. 320 - pcs.60 2. 320 - pcs.3 3. 330-piece 9 3. 330-piece 10 4. 340 - pcs.12 4. 340 - pcs.5 5. 350 - pcs.5 5. 380 -pcs.6 6. 360 - pcs.3 7. 370-pc.14 8. 380 - item 5 9. 390 - pcs.6 10. 410 - item 5 11. 420-piece 6 12. 430-piece 6 13. 440-piece 16 14. 460-piece 26 15. 480-piece 6 16. 490 - pcs.4 17. 510-piece 6 18 520-pc.5 19. 540-piece 6 20. 550 - pcs.50 21. 560 - pcs.4 22. 570-piece 6 23. 580-piece 5 Fixed rollers instead of adapters; 1. fi 89.243 pcs.6 fi 105.159 pcs.6 3. fi 124.257p.6 4. fi 140 ...

Plate Filter JOLLY 20 For Juices, Wines, Beers and Oils - 2021 This plate filter was made by Italian MORI-TEM company in year 2021 and it has been only tested and thus in new like condition. Main structure is made of AISI 304 stainless steel, and the plates are made of food quality plastic material. It has been designed to clarify and sterilise red, white and sparkling wines, olive oil, vinegars, cosmetics, natural essences, herbalist products, sweet and dry liqueurs, etc. Equipment contains a food grade product circulation pump Technical characteristics Manufacturer: MORI-TEM S.r.l. Model: JOLLY 20 Manufacturing year: 2021 Capacity for oil: 100 litres/h Capacity for wine: 600 litres/h Number of plates: 21 Plate size: 20 x 20 cm Filtration area: 0.8 m2 Main dimensions: 72x43x55 cm (L x W x H) Machine weight: 36 kg Certification: CE

Blister thermoforing machine for PET for olive oil, jam, chocolate cream. Thermoforming machine for Minidose. Up to 12.000 pcs per hour. Spanish production. Best components as Panasonic, Omron, Datalogic, etc. BP Machinery, experience from 10 years ago. More information please contact.,

Filling machine RCM for oil – 1998: Yea: 1998 Producer: RCM Direction Clockwise Technical Details -Machine suitable for olio -Filler RCM 16 valves for oil -Working machine Code T 11

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemei ...

Grinding mill of three granite stones of Ø1200, Ø1250 and Ø1300mm respectively, designed for the traditional grinding of olives. Bottom built in pink granite and stainless steel tank.

Alfa Laval Alfa Laval UVPX 307 AGT 14 separator centrifuge oil fish , olives Alfa Laval UVPX 307 AGT 14

Oven 450 inner dimensions 2x2x6m PLC Uterna / Europe custom made oven Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammeröfen Haubenöfen Drehherdöfen Thermische Nachverbrennungsanlagen forno a camera per trattamento termico alluminio forno a carro per trattamento termico alluminioforno a carro per trattamento termico alluminio forno a carro per trattamento termico alluminio forno continuo per trattamento termico alluminioforno continuo per trattamento termico alluminio forno continuo per trattamento termico alluminio linea batch per trattamento termico alluminiolinea batch per trattamento termico aliuminio forni industriali da  ...

Tag.64-n.1 iron structure for loading the product in Big Bags on load, n.2 steel augers of 130 lt each, winch with control flush, electrical panel, year 2004 volt 380, Olivari brand, mod. CTI 130, serial number 332, touch screen control panel for loading product located on the lower floor (masonry works are required to - Tag.65-n.1 Aspirator for medicine departmentTag.70-n.1 clock scale brand Alfa Bilici, max capacity kg 50Tag.76-n.1 iron structure with wire lifting winch, capacity 2000 kg, measures approx. 4000x h 4000 mm, IPE 120 beamsTag.77-n.1 saw circular countertop, Stayer brand, mod. TV507, year 1999, s/n 020741, 2100 watts, 3500 RPM, 355 mm disc diameter Tag.90-n.1 watch scale brand Futura weighed max kg 150, n.1 watch scale brand Odeca, max weight kg 300Tag.97-n.2 scales with thermal printer and load cell brand Dini Argeo, Mod. DFWO6, s/n 12788622, dig ...

grinding height: 50 mm grinding width: 120 mm grinding wheel diameter: 600 mm total power requirement: 85 kW weight of the machine ca.: 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _______________________________________________________ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grin ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

Thermoforming machine for small cups of olive oil, ham, honey etc. Themachine make the full process with thermoforming, filling , sealing and cutting. PLC and Touchscreen, dosing with servomotor. Electric photocell for spot. Top brands in electronic components, as Omron, Datalogic, Panasonic, Schneider. Further information please contact. we produce it in Spain. The machine is tested some years ago, good thermoforming with PET, dosing with no dropping and good sealing and easy open. Production depending of each model.

Used decanter centrifuge made by Alfa Laval, model: UVNX 414, worked on olive oil approx. 6 years, working condition.

Double miter saw make RAPID type DGLSeries 3737, make -No: 2748 built in 1978with drilling and milling machine type BFA series 1109, make -No: 301 built in 1978Sägeblattdrm. : 420 mmCutting length: 4500 mmSaw blades tiltable: 90 - 45 °Max. Cutting height: 150 mmDrive power sawing units: 2 x 3 kWDrive power drilling unit: 1.1 kW (2700 rpm)Motor longitudinal adjustment sawing units: 0.75 kWExternal dimensions L x W x H: 7000 x 1100 x 1700 mmfor olive drilling and lock boxWith- Programmable control MTH for length- 2 revolving extraction systems- Drilling unit BFA (for drilling and milling of handle and lock machining)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best r ...

olienherstellung =: PVC shrink and PET Line speed: 80 meters/min Final net film width: 4.2 meters Line speed: 80 meters/min Production capacity: 21 tons/day The machine includes: -Automatic turnstile unwinder 2 meters -Automatic turnstile -Winder 4.50 meters -Cooling system -automatic thickness control -automatic control of infrared heating -Automatic inline edge strip handling system -TCU -Controller fan -Cooling tower -Exhaust pipes -Exhaust hood -16 steel core width 4.8 meters -Complete spare parts (package purchased for 280.000 €) Dimensions approx. length 50 m x width 19.0 m x height 5.9 m

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (L/W/H): 6100x1500x2300 mm Weight: 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Hori ...

Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the au ...

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 ja/Yes boring of olive 1=yes, 0=no: 1 ja/yes Corner bearing and olive drilling machine Götzinger OBM-PLUS Vertical drilling unit with quick-change device Pneumatic feed via foot valve 1 adjustable backstop 2 swiveling workpiece supports 1 machine stand complete with shelf Left and right roller conveyor each 1.5 m, 200 mm wide, 4 rollers each 220/380V, 50Hz, 1.1KW 1 drill head BKF 3, 21.5 mm pitch, quick-changeable Drill mount M 10, cyl. right/left complete with stop system 2200 mm long Total length with 12 folding stops adjusted to a constant grip dimension (olive drilling) Consisting of: 2 dowel drills d=10 mm 1 artificial drill d=25 mm 1 drill head BKF 2/3 quick-change drill 2/3 spindles for corner bearing on the loose frame part. Hardware Roto- alternative on request Complete with stop system with 2 foldi ...

Container 2,9 x 9,0 meter, gaskooler, gasheaterr, aktiv carbonlfilter, intercooler radiator silencer, ventilation olietanke, exhaurst heat exchanger, gasstring, Gas booster, panelboar and curkitbreaker, • Brand og model; MAN E2876 •Power; 220kW •Heat; Eksos 139kW. Vann 103kW • Year; 2015 • Running hours; ca 30.000 • Hours since last ouverhaul) ca 7000 • Compleat unit Plug and run • Spareparts extra turbocharger.startmotor filters and other parts. I have this unit on stock 50000 euro ready to load

- Capacity : 5 - 12 To/h - Delivery head: up to 8 m - Type : "Olive" - Motor: 3 Kw - With electronic variable speed drive - With pressure bell - Connection: NW 100, 4" gas (male connection) - With removable hopper extension - Dimensions: Length 1620 x width 660 x height 900 mm

Alfa Laval UVPX 307 AGT 14 Separator Centrifuge Oil Fish, Olives 5750l/h Motor 5.5 kW

Column Drill Ayen mobile Branch Flick Head Drill head for window olives Extension for drill chuck Stops on both sides Depth gauge The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Used Filling Machine Bertolaso Olimpia 12 Valves for still wine 2500 bph 12 valve filler for still wine capable of reaching a speed of 2500 BPH It has safety features and also all manuals Direction of rotation anticlockwise This used filler from 1997 works with three bottle formats namely 0 375 L 0 75 L 1 5 L The number of nozzles of this machine is 12 and they are fixed [...for more information send your inquiry to the seller.] refno: R54

Pieralisi Used Complete Equipment for Oil Production SC 600 1997 1 ton per hour Pieralisi is a well known Italian company that specializes in the design and manufacture of machinery for the extraction and processing of olive oil as well as equipment for other industries such as wine beer and dairy The Pieralisi SC 600 is a complete equipment used for olive oil production 1 ton per hour The SC 600 is a complete production line that includes all the necessary machines for the processing of olives into oil This includes a washing machine a leaf remover a crusher a malaxer a centrifuge and a decanter The machine is designed to process up to 600 kilograms of olives per hour making it ideal for small to medium sized olive farms The washing machine is used to remove any dirt or debris from the olives while the leaf remover removes any leaves or stems that may be attached to the fruit The crushe ...

Used Complete Line for Oil Pieralisi Maior 2 2000 2 ton per hour The Pieralisi Maior 2 2000 is a state of the art machine that is designed for high speed oil production This machine is widely used in the oil industry due to its reliability and efficiency The complete line for oil production includes several components all of which are Pieralisi Maior 2 2000 machines These machines are designed to work together to produce high quality oil quickly and efficiently The components of the complete line include a decanter separator heater conveyor defoliator washer auger and Grams Group The decanter is used to separate the oil from the solids while the separator is used to remove any remaining impurities The heater is used to heat the oil to a specific temperature and the conveyor is used to transport the oil from one machine to another The defoliator is used to remove any remaining leaves or s ...

Used Automatic Filling Monoblock for Olive Oil 20 3 Brand Baratta 4500 BPH The machine is disconnected from the production line but is in perfect state It consists of 20 valves vacuum filling unit 3 head capping unit 1 size 35 24 aluminum Screw cap machine composed of the following equipment Bertoli oil 1lt 500ml 750ml raises and lowers electric filler raises and lowers electric capper no cap sensor upstream bottle downstream sensors overflow lack of bottles [...for more information send your inquiry to the seller.] refno: M177

New Filling Monoblock Bertolaso 30 30 4 PET Glass up to 6500 bph Notice Brand NEW Bertolaso monoblock never used Zero working hours Pristine condition The perfect opportunity to purchase a new monoblock at a used price This new Bertolaso 30 30 4 monoblock emerges as an advanced technological solution specifically designed to optimize filling operations for syrups filling system Manufacturer and Model Produced by Bertolaso a benchmark name in the industry this monoblock stands out for its performance and build quality The model specification 30 30 4 combined with its production year 2021 provides crucial information on its current relevance in the bottling solution landscape Speed and Capacity With a speed of 6500 BPH this filling monoblock Bertolaso can handle both PET and glass containers ensuring accuracy and consistency in the filling process Rinser The rinser is equipped with 30 grip ...

Pieralisi automatic olive oil processing plant 1 ton h Components and Material of the Pieralisi Olive Oil Plant The Pieralisi automatic olive oil processing plant 1 ton h is mainly built in stainless steel a material chosen for its resistance to corrosion and ease of cleaning The system includes key components such as the olive elevator hammer crusher and double bowl mixer all designed to operate at 380 volts Maintenance and Reliability Maintenance of the machinery is a priority motors and bearings are regularly checked and replaced when necessary to ensure optimal operation Attention to maintenance prevents malfunctions and prolongs the useful life of the machinery Working process The process begins with the phase of defoliation washing and transport of the olives followed by pressing The LAVOLEA 90 INOX 2006 model is used for defoliation and washing while the olives are transported via ...

Built in AISI 304 stainless steel and in accordance with EEC standards, the machine is ideal for filling a wide range of solid products, also particularly difficult, whole, in small or medium-sized pieces in cans, jars, plastic containers. ... The filling process is carried out with the most advanced technologies that ensure the precision of the dosage, guaranteeing automatic operation and high speed without any damage to the product. All the operations of change of format and washing of the machine are carried out quickly and functionally. At the customers request it is possible to make the tangential exit of the containers. RODUCTO Tomato (whole, chopped) - Olives (whole, sliced) - Legumes - Vegetables (whole, chopped) - Carrots (chopped,

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 0 boring of olive 1=yes, 0=no: 1 0 Dimensions (L/W/H): 3600x800x1900 mm weight: ca. 120 kg Olive drilling machine type: OBM-Plus Special version (corner and scissor bearing + handle olive drilling) --------------------------------- Vertical drilling unit with quick-change device Pneumatic feed via foot valve 1 adjustable back stop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/380V, 50Hz, 1.1KW Machine complete, but without drilling tools Drill head BKF 3, 21.5mm pitch, quick-changeable Drill holder M 10, cyl. right/left complete with stop system 2200 mm long Total length with 10 folding stops set to a constant grip size (for handle olives) Drill head BKF 2 can be changed quickly 2 spindles for corner bearings drill on the loose frame part complete with stop system with 2 folding stops Drill co ...

Output: max. 80 packs/minute, designed for square cups (101 x 101 x 57 mm),, two lanes,, consisting of the following individual machines:, shell destacking, make Carsoe Anytray Twin Denester, year of construction 2013, volume dosing filler, manufactured by Lieder/Robot Food Technologies, series AWF, type 2, year of construction 2015, for free-flowing, non-sticky products that contain little liquid., min. 15 pieces of product must make up the volume to be filled The machine is designed for processing e.g. vegetable mixtures, rice, pasta, caviar, olives, etc., With lifting and tipping device and corresponding housing, without dispenser for liquid or pastes, self-made, Time-controlled pump for dosing oil, brine or pasty products such as dips or dressings, two filling stations,, tray sealing line, make Multivac type T700, year of construction 2012, Sealing of prefabricated trays, bowls and c ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (L/W/H): 6100x1500x2300 mm Weight: 950 kg 1 Götzinger Power Drill drilling and milling center ------------------------------------------------- Machine is FACTORY TESTED by Götzinger before delivery. Depending on the type and version, you can use the Götzinger PowerDrill to: - Drill on the front and long sides - Doweling of house doors, timbers, brackets - The drilling patterns are freely programmable - You can: drill handle olives and corner bearings, with quick-change ones Multi-spindle drilling heads - You can: mill lock cases, handles and PZ as well as 3D hinges drill - The machine has a horizontal and a vertical milling unit - A simple control allows you to create drilling and milling programs, save and access again and again Stable base frame, covered with sheet metal Table ...

0: ja, 30 Faecher Working width: 2250 mm 0: nein Ruchser RU-BM 2500 ---------------------- Fitting table with fitting shelf 30 compartments with olive drilling rig Uniqick 2000 screw magazine with feed to the hand screwdriver Selling ex location, can still be viewed in use! (technical information according to the manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of machnines: 15 Stk Loading meters, approx.: - m Total weight, approx.: - kg Company closure for wooden window construction -------------------------------------- Machines will be available from August/September 2024. Pos. 1: Weinig, PFA 17N, built in 1967 Four-sided planer, 6 spindles, chain drive, with glazing bead separation, with planing heads Continuous feed, working width 170 mm, working height 120 mm Electric height adjustment feed beam Pos. 2: MAPO Spu 180, built in 1992, finishing machine, mobile Pos. 3: Gubisch CW 2, built in 1998, angle system with return, with Leitz IV 68 wood, wood-aluminum, Gold IV 78 wood 1 slot spindle, 3 profile spindles Pos. 4: Götzinger OBM, built in 1998 corner bearing and olive drilling machine, 1 drill head Olive, 1 x drill head corner bearing Roto NT with left and right roller tab ...

Tenoning spindle: 1 0 Number of milling agregates: 3 St. Spindle diameter: 50 mm Weinig Unicontrol 10-5, built in 1993 Slotted spindle 6 x 100 mm 2 profile spindles length 320 mm, stroke 95 mm Fitting spindle with folding device with return and discharge device Weinig Univar 10 with olive drilling rig, built in 1990 3 spindles each 320 mm long, stroke 95 mm + Fitting milling device Götzinger SFM, built in 2011 -------------------------------- Milling machine for the locking parts in the frame with 4 mm clearance + Drilling corner bearing Includes tools for Weinig Unicontrol: Zuani Tools IV 68/78/90 wood, 68/78 aluminum 4 mm clearance -------------------------------- For sale on behalf of the customer ex location Machines are currently still in use -------------------------------- (Technical information according to the manufacturer - no guarantee!) The data for this ad was created wi ...