oil unit used for sale

General SKU900WP034 MakeLAUDA TypeIT HW 350-Ex Mach.No.B 17 275 Year of construction2003 Main Features Heating (medium)Electric Capacity20 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:water Heating capacity20 kW Electric capacity22,7 kW Temperature120°C With jacketcheck General Mounted on framecheck LocationBarneveld Floorspace0,6 x 1,6 m Total height1,6 m Weight800 kgTemperature control unitsNew arrivalsLaudaHeat exchangers > Temperature control unitsNew arrivalsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU900WP080 MakeDeltatherm (D) TypeWP 412/15 Mach.No.7/8032 Year of construction2001 Pressure Working pressure8 Bar Main Features Heating (medium)Electric Capacity12.8 KW Temp.150 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:Water Electric capacity12,8 kW, 400 V. With coolingcheck TemperatureMax 150°C With pump40 ltr/min With jacketcheck General LocationBarneveld With switchcheck Floorspace0,3 x 0,7 m Total height0,65 m Weight125 kgTemperature control unitsDeltathermHeat exchangers > Temperature control unitsBrand > Deltatherm What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Flute laminating machine CA1300 Side register heel. The bottom feed stack can be adjusted for suction intensity from the touch screen, including an automatic cleaning system. The input pile has a non-stop system Monitoring by PLC with alarm in case of power supply error. Automatic gluing system that regulates not only the flow but also the recirculation. Features: · Max sheet size: 1300 X 1250 mm · Min sheet size: 400 X 400 mm · Thickness of the upper sheet: 175-600gsm / 145 - 450gsm Kraft · Bottom sheet thickness: Four-ply corrugated paper: A/B/C/E/F - Grey cardboard · Max speed: 7000 sheets per hour · Gluing accuracy: ± 1 mm · Weight: 5000 kg · Dimensions: 11500 X 2000 X 2400 mm · Electric power: 10 Kw / 380V

Die Cutting Machine Unitec T1060 Die Cutting Machine Unitec T1060 The T1060 automatic machine with or whithout stripping is used to diecutting and creasing paper, cardboard and corrugated and operations for cardboard boxes, paper labels and especially for delicate printing jobs such as cigarette packages, wine, gifts and cosmetics, etc. This machine works automatically throughout its process, with a user-friendly interface to control the cutting speed, number of sheets cut, total operating hours and its working status, as well as to dynamically control the PLC inputs and outputs, and malfunctions to facilitate operation control and troubleshooting. In addition, the machine also features self-testing (e.g., double sheets, missing sheets, accumulated sheets, or fallen sheet detection) and continuous process sampling, while providing you with a solid cutting and accuracy registr ...

Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The demonstration unit has so far only been used at trade fairs and for demonstrations. The machine is therefore as good as new. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without vacuum cleaner) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 2 ...

Qty. 1 Second-hand recoiler Mfc.: United Type: Q610 mm Built: 1958 Model: Reversing Coiler right to left Capacity: Max. 45 ton

Key data: 125

3 x GE CALNETIX HEAT TO POWER ORC GENERATOR Model: X2 Year: 2011 Hours: 10,000 Capacity: 125 kW Condition: Good. Operated on full maintenance contract Scope: Complete ORC unit Price: €80,000 each Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange Yours sincerely, Edward Dulake Tel: (+44) 07595 426 731 Gas Engine Exchange Ltd

Factory-powered LuefterMotor Umwaelzmotor for Unitherm am Lager! Immediately available! with performance; Immediately available

Seidenader T&T Single Unit Track & Trace System for marking and verification of folding boxes/cartons for serialisation and aggregation (Track&Trace), the product codes and variable data (serial no., batch no., expiry date, datamatrix codes, French codes, etc.) printed on the folding cartons are verified via a camera for accuracy and quality, including Wolke m600 advanced Ink jet printer using HP ink cartridges (height of printing max. 12.7 mm), 1 (one) printing station with 2 (two) printing heads located on the back side, infeed conveyor with a length of approx. 300 mm and a width of approx. 185 mm, transfer unit with lower belt and adjustable upper belt for precise and reliable product transfer, carton length (in the direction of travel) max. 220 mm, carton width max. 200 mm, direction of travel from left to right, handheld scanner, electrics 230V + N + PE /50 Hz/1,0 kW, machine floor  ...

Laminator 380 Plus • Automatic feeder with suction head • Inlet stacker • Automatic sheet separator • Film trimming device (includes cutting and trimming blade) • Chrome plated rolling roll •Touch screen • Anti-bend system • Fans for cooling after the grille • Stamping system included used foil rewinder • Hydraulic rolling roller pressure Specifications: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 – 42 μm Film mandrel shaft: Ø75 mm Maximum film reel diameter: Ø340 mm Material Weight: Digital printing paper: 135 – 350 g/m² Other paper: 157 – 350 g/m² Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Top rolling roll diameter: Ø120 mm (chrome plated and polished) Lower rolling roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC – 5 ...

MJ UNI-MIS 037-000 Scope of delivery of the CT Scan Unit: Separation of the CT control room from the CT examination room by lead glass pane Patient access corridor Separate air conditioning in the CT room, control room and corridor Hygiene concept All 3 areas have their own ventilation (CT room, control room and corridor). The control room (seat of the MTRA for CT operation) is ventilated from the outside. The air in the control room has overpressure and escapes into the corridor. The CT room has its own ventilation from the outside, air escapes back to the outside, and the air flow is in balance. The corridor also has its own ventilation. Door widths 90 cm. A step to enter the container. Technical questions from the customer: Where is the exact exit and entry point for the network and electrical equipment at the container? Container door (short container side)  ...

Serialization system for packaging line: suitable for the printing of code data on the cartons. Incl. camera vision system, bad ejection and data management system etc.

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Technical Data: Distillation vessel volume: 150 liters Constant fill volume: 100 liters Maximum operating temperature: 200 °C Absolute vacuum: up to 50 mbar Heating power: 9 kW Cooling water consumption: 0.8 m³/h Distillation output: 30-60 L/h Features: • Cylindrical, vacuum-tight vessel with flanged lid • Heating via heating floor or heating jacket (steam at 10 bar, 185 °C max) • Water-cooled stainless steel condenser • Rotating scraper agitator system to remove deposits and ensure heat transfer • Residue discharge valve (manually or pneumatically operated) • Sight glass and explosion-proof lamp for observation of the process

2 X DEUTZ MARINE ENGINES V12 816 626 HP@1800 RPM WITH TWINDISC MG5202 2.48:1

Labelling unit Etiquette unit complete wth pneumatics

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

Fully electronic flour bagging system from 25 to 50 kg. New electronic control IT 6000 E Triple dosing screw 3 x 0,75 kW Pneumatic actuators. 2 x bag nozzle with one-hand clamp. Inlet bin with electronic full/empty sensors. The entire plant has been overhauled and inspected

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic data cable -Type: Unitronic LiYCY 8x2x0.5 ROHS -Length: 75 m -Price: complete -Dimensions roll: Ø 700 x 490 mm -Weight: 36 kg

Computer monitor, control unit, operating unit, keyboard, screen, control -Manufacturer: Heidenhain, Manual Plus Monitor from lathe Kern CD 480 -Type: 12.1 VGA Unit Rotating. ID No. 367 957-02 -Dimensions: 400/300/165 mm -Weight: 5.8 kg

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic LAN Kabel CAT.7 4 x 2 x 23AWG -Type: STP/SH PiMF 600 Art. 2170614 -Length: 244 m -Price: complete -Dimensions roll: Ø 550 x 350 mm -Weight: 22 kg

complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition

Support grinding device, support grinder, support grinding device, circular grinding device, bench grinder, grinding machine, stand grinder, stand grinder, combination bench grinder -Grinding device -Voltage: 380V -Drive: 1.6/1.15 kW -Speed: 2800/1400 rpm -Dimensions: 390/223/H240 mm -Weight: 20kg

liquid conveyors lubrication unit for 5 Tetra Pak lines, excellent condition

I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !

I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !

Pilz safety system PNO m0p 773110, stocked goods, no functional test, manufacturer number: 773110. EAN number: 4046548013153

Specifications Tower storage system for sheet metal Manufacturer: KASTO Type: UNITOWER B3.0 Year of construction: 2008 Number of magazines: 49 Pull-out trolley on rail

450 x 130mm aperture size. 320mm wide conveyor belt. Checkweigher table width 390mm. Air blast reject system. 2200mm machine length. 900mm line height.

355 x 200mm aperture. Usable aperture of 155mm. Conveyor width of 300mm. 850mm line height with adjustable feet. 475mm weigh pad length. Right to left production. M&S spec machine.

One used SCHLATTER automatic binding unit for welded mesh stacks. Comprising a left and right unit; automatically binds the mesh stack

Key data: 5 , 50 , 3147

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Prodicon Batch Off Unit 500mm sheet width Inlet speed 0-10m/minute Sheet thickness 5-12mm No. of cooling sections 3 No. of fans 9 Complete with electrical control panel. Year 2009

Triplex Plunger Pump Unit KD825 URACA for Press Drive consisting of: Pump KD825 URACA Pressure Lubrication unit Water-Oil cooler Reduction bevel helical gear box (angular design) with couplings Base frame open type Discharge ball resonator (pulsation damper) Pressure safety valve, set pressure 360 bar Induction electric motor Process medium: water-oil emulsion Discharge pressure 325/320 bar Capacity 1,330 l/min Pump speed 340 min-1

MBO K 800/6 S-KTLT with 2nd unit Age: 2006 Format: 780x1200 mm Equipment: Pallet Feeder K 800 - FP120 MBO Navigator Touchscreen Control Panel 6 buckles 1x Side buckle 2x knives 1x Side Buckle Electr. Double sheet control Anti Noise hood Slitter Shaft Cassette MWK Scoring, Perforating and Cutting devices for standard operations 2nd Folding Unit K 800.2-2-78/4 with double benefit device

Máquina serigráfica con 1 cabezal Área máx. impresión: 340 x 380 mm Ancho máx. de banda: 350 mm Diámetro máx. de bobina: 700 mm Registro por marca Desbobinador y rebobinador independiente Secado UV

Year of construction unknown Imprint suitable for Heidelberg MO Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Working width: 950 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 970 x 2150 mm Feed motor: 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm