126,612 used machines on RESALE, but how to find them? Machine Search
Tunnel dimensions X/Y: 420mm/240mm, welding frame dimensions X/Y: 500mm/400mm, max. roll width: 600mm, max. product height: 150mm, tunnel length: 700mm, machine dimensions X/Y/Z: approx. 2400mm/900mm/1550mm, weight: approx. 300kg. Documentation available. On-site inspection is possible.
Air volume flow: 4500m³/h, max. negative pressure: 3400Pa, motor power: 4kW, filter area: 42m², number of filters: 3, machine dimensions X/Y/Z: approx. 2050mm/1050mm/2050mm, weight: approx. 350kg. Documentation available. On-site inspection is possible.
A distillation machine for the separation of colors and solvents is available. Filling capacity: 25l, solvent distillation time: approx. 4h-5h, rinse water distillation time: approx. 13h, cooling time: 3h-7h, operating temperature: 50°C-200°C, power: 2kW, oil type: Essotherm 500, oil capacity: 12l, cooling type: air cooling. Dimensions X/Y/Z: approx. 600mm/1000mm/1200mm, weight: approx. 130kg. Documentation available. On-site inspection is possible.
Volume flow: 4080m³/h, filter area: 34m², BIA category: G, differential pressure: 1650Pa, filtration surface load: 120m³/h-m², air density: 1.2kg/m³, operating temperature: 20°C. Documentation available. On-site inspection is possible.
impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Crestline The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Nederman filter box extraction system is available. Filter: activated carbon, filter type: F7/F9/F11/activated carbon 1/activated carbon 2, power: 20kW, machine dimensions X/Y/Z: approx. 5000mm/2500mm/1500mm. Including steel frame, piping and extraction hoods. Documentation available. On-site inspection is possible.
Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 500-10,000g | filling hopper capacity: 100 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 2.75kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
A Scantech thickness gauge is available. Measuring frame: 5500mm, measuring width: 5200mm, material: PU/acrylate/EVA coating, backing: polyester/cotton, max. basis weight: 600g/m², parallel accuracy: less than 0.2mm, measuring gap: 60mm-80mm, web speed: 550m/min. Sensor XT10: PP: 2g-2000g/m², accuracy: +/-0.1%, resolution range: 2mm-10mm. The machine has never been used. Documentation available. On-site inspection is possible.
Lamier FL 7B 4kw extraction system Power 4kw Number of bulk bags 2pcs Diameter of bags fi600mm Number of filter bags 32pcs Diameter of filter bags fi 200mm Filter bag length 1550mm Bag shaking system Inlet port diameter 300mm CE Certified Dimensions: height 370cm, width about 260cm, depth 110cm
Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-3000g | filling hopper capacity: 50 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1.4kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 10-5000g | filling hopper capacity: 50 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 2.25kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 3-500g | filling hopper capacity: 30 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-1000g | filling hopper capacity: 30 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1.4kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 1-200g | filling hopper capacity: 15 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Compette linear unit, dismantled, max. stroke 900/1220mm, , used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company as part of a machine disassembly and is in very good condition. The photos show the linear unit mounted on a swivelling blasting table. One unit has the motor on the left, the 2nd unit has the motor on the right. The parts have already been dismantled! Complete linear unit with the following scope of delivery: - Electric motor Siemens, 1LA7096-4AA11, 1.5 KW, 1420/min, - Zimm lifting gear I=6:1, 24mm stroke/sec. - Max. stroke without carriage only with threaded nut 1220mm, - Max. stroke with slide approx. 900mm - Trapezoidal threaded spindle 1270mm, with bellows, D35mm, 6mm pitch, - Bearing block for spindle with mounting bracket - Bronze threaded nut with lu ...
NC Branch Hofmann RWNC 160 Tip height: 160 mm With tailstock
Suitable for extracting oil mist., Nominal volume flow: 950 m³/h, noise level: 71 dB (A), number of revolutions: 2850 rpm, Dimensions W x D x H approx.: 525 x 592 x 781 mm, Weight approx.: 55 kg, Connected load approx.: 0.75 kW (400 V / 50 Hz),, colour: Grey
Hydraulic power unit with tank and internal Pump. • 15 kW electric motor. •Switchboard Control box and cable for electrical Connection. • Heat taischer integrated. •Oil filter with electrical monitoring. • Oil temperature monitoring. • Float switch (oil level) with electric Surveillance. • Rexroth Hydronorma Relief valve. •Window Oil level. • Oil connection cables included.
An unused Kemper extraction system for room ventilation in the production area is available. Filter class: H10, Filter method: Storage filter, Filter material: Nano-Cellulose, Separation efficiency: 99.9%, Dust class: M, Volume flow: 5000m³/h, Motor power: 3.35kW, Filter area: 50m². Machine diameter: approx. 1200mm, machine height: approx. 2700mm, weight: approx. 420kg, operating hours: 1h. Documentation available. On-site inspection is possible.
Gestra Condensate Compensator 50 l, 8 bar stainless steel with connection flanges DN 50, DN 80, DN 20, with stainless steel shut-off valve DN 20, emptying oval flange and 3 foot spindles + Check valve DN 80 Cylinder 240 Klepper floors each 100 long
Nummerierwerke Buchdruck / Numbering Units Letter Press Leibinger NW
Suppository production line for prefabricated plastic cast packaging Working direction from right to left Output max. 10,500 suppositories/h Material of cast packaging PVC/PE, PS/PE, PVC/PVDC/PE Dimensions of pouring packages: Container spacing 17.3 mm (pitch), container height 44-51 mm depending on format tools, standard version. Casting packaging Roll material printed and unprinted, roll diam. 500 mm, pick-up diam. min. 100 mm Available format parts for container heights 44 mm (1.1 g) and 51 mm (2 g) Polystar 100 GE film sealing device for sealing the film ends Contactor control Drive 400V/50Hz Line consisting of: Filling machine Citopac SFD-10 CP 2 filling stations, distance 17,3 mm -osing range per filling point 0.5-3.5 ml Dosing via heatable intermediate container 0.3 l and heatable tap head with rotary slide control (3 each a ...
Slightly used, technically flawless! Control: Simatic Tank capacity: 700l 1x Coolant pump high pressure: Flow volume 30l/min / 50 bar 1x Coolant pump low pressure: Flow volume 80l/min / 3 bar Fleece width: 390mm Connection: Voltage: 3x400V+PE/50Hz Power: 7.5kW Rated Current: 15A Pre-fuse maximum: 50A Dimensions LxWxH: 1700 x 1400 x 2100 mm Total weight empty: 650kg
Name: High Voltage Resistor Unit Manufacturer: RIME Dimensions: 205 × 135 × 280 mm Weight: 4.76 kg Condition: Used. With visible signs of wear (e.g. rust on screws), but overall in good condition. No breaks or visible defects. Technically not tested. Additional information: Solid resistor unit with four ceramic-insulated coils, suitable for industrial applications in the high voltage range.
Name: High Voltage Resistor Unit Manufacturer: RIME Dimensions: 205 × 135 × 280 mm Weight: 4.76 kg Condition: Used. With visible signs of wear (e.g. rust on screws), but overall in good condition. No breaks or visible defects. Technically not tested. Additional information: Solid resistor unit with four ceramic-insulated coils, suitable for industrial applications in the high voltage range.
PELLETIZERS WATER RING, Constructed with first quality materials and components they are reliable accessories to your extrusion line, compact and economic., made in sturdy stainless steel, With self adjusting knives to nozzle, with less wearing out and incresed efficiency, re-circulating water pump with water filtering unit for re-use, Heat exchanging unit included. You can connect it with your factory chilling unit., electric cabinet with Siemens touch screen for setting all parameters, Modem for remote assistance, Suitable for a variety of plastics and masterbatches., Size bespoke to your project : 100 to 3.000 kg/h, Materials : LDPE HDPE LLDPE PP PS PC ABS, capacity: 100-3.000 KG.
HOT-AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. (adjustable width) on the web as per photo, while slitting, Adjustable air-blow to determine the sealed ribbon width Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machine is offered RECONDITIONED and TESTED
Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwards xx099-1 Numbering Units Leibinger Gradsteller rückwärts / straight Backwards xx099-2 Numbering Units Leibinger Gradsteller vorwärts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rückwärts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwärts / convex Forwards
Manufacturer: TOOL-TEMP Model: TT-28000 DG Type of Machine: Temperature Control System Voltage (Volt): 3-phase, 380–415 V Power (Watt): 3 × 9000 W Frequency (Hz): 50 Hz Refrigerant Gas (Gas): R-134a Refrigerant Quantity: 10 kg Find more here - / Contact us at -
Key data: 140 °C, 10 kW
Max. heating capacity - 140°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended
A Wieland extraction system is available. Engine speed: 2930rpm, power: 18.5kW, weight: approx. 1200kg. Documentation available. On-site inspection is possible.
Key data: 140 °C
Temperature control unit of the tools - Tool Temp TT-118K / MP-988 (3 pcs.) Year of Make: 2020 Location: Lodz, Poland Description: Max. heating capacity - 140°C Heat transfer medium - water Power: 29.3 Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 160 °C, 20 kW
Temperature control unit of the tools - Single STW 180/1-18-70-N1.1 (2 pcs.) Year of Make: 2013 Location: Lodz, Poland Description: Max. heating capacity - 160°C Heat transfer medium – water Power: 20 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 140 °C, 10 kW
Temperature control unit for tools - Wittmann Tempro Plus (15 pcs.) Year of manufacture: 2009-2018 Location: Lodz, Poland Description: Max. heating capacity - 140°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 90 °C, 10 kW
Temperature control unit for tools - Wittmann Basic-C90 Year of Make: 2015 Location: Lodz, Poland Description: Max. heating capacity - 90°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 90 °C
Temperature control unit of tools - Tool Temp TT-188 (20 pcs.) Year of construction: Location: Lodz, Poland Description: Max. heating capacity - 90°C Heat transfer medium – water Power: 9850 watts Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:
Tightening Banding Machine for Shrink Film
Hydraulic power unit with hydraulic pump BOSCH REXROTHHydraulic power unit Year of construction approx. 2000Operating pressure pump1: 10 barVolume flow pump1: 24 litres/min. Engine power pump1: 1.5 kWoperating pressure pump2: 120 bar (max.140 bar)Volume flow pump2: 44 litres/min. Engine power pump2: 11 kWTankle capacity: 200 litresMains connection: 400 volts, 50 Hz- 2 independent hydraulic pumps, each with its own drive motor- 6 hydraulic valves built- Cleaning cover in the oil tankSpace requirement L x W x H 1000 x 700 x 1200Weight:
Clinch unit TOX - Pneumatic-Hydro Tox pressHydro-pneumatic press TOX Pressotechnik POWER PACKAGEType type CRS 03.62No.: 207599.2Year of construction approx. 2005Pressure capacity: max. 80 kN = 8 tonProjection: 20 mmInstallation height: 32 mm- Built-in clinch tool- pneumatic valve for control- Push-through joining or clinching- For making a form-fit connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control and Foot switchWeight: 230 kgComes from
Hydraulic power unit with hydraulic pump BOSCH REXROTH / HYDRONORMAHydraulic power unit Year of construction approx. 1985Operating pressure: max. 65 barVolume flow: 20 litres/min. Fuel tank capacity: 110 litersEngine power: 3 kWMortor speed: 1440 rpm. Mains connection: 400 volts, 50 Hz- 1 piece hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1- 1 piece drive motor KATT, type FFN 100L- 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM- 1 piece return filter- 1 piece 4/2-way hand valve (e.g. for retracting and extending a double
Hydraulic power unit with hydraulic pump RACINE / VICKERSHydraulik gensetOperating pressure: max. 44 barVolume flow: 13 litres/min. Tank capacity: 40 litersEngine speed: 950 rpm. Engine power: 0.75 kWNetz connection: 380 Volt, 50 Hz- 1 piece hydraulic vane pump PVQ-PSS=-06CR-J11- Hydraulic tank with maintenance cover and oil level sight glass- 2 pieces hydraulic hoses with 12L connections, length = 950 mmSpace requirement L x W x H:: 700 x 400 x 750 mmWeight: 97 kg (without oil content); used
Table unit from a DROOP & REIN portal milling machineClamping plate with T-slots made of cast steel-gray cast ironTable unit with clamping plate and very solid guidewayTable clamping surface 5500 x 2000 mmTravel distance of the table clamping plate approx. 3100 mmTable height-height 1050mmTable load: max. 20 ton. Ball screw: 100 mmThread pitch: 20 mm (single)- Machining table very stable on the bed- Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine- Longitudinal table movement over
Universal temperature control unit WEINREICH type WTD 4Temperature control unit with electric heating and connections for external coolingFabr. No.: 11932217 year of construction 1993Temperature max. 140CBorcing pressure max. 6 barPump capacity 30 l/min. Tank volume 4 litresHeating capacity 4 kWeergisation capacity heat exchanger 15 kWCotor capacity of the pump 0.37 kWUmrune water supply + return G 3/8Cooling water flow + return G 3/8Total capacity 4.4 kWNe-connection 380 volts, 50 Hz, CEE plug-in temperature control medium water
Filter fitting, filter unit COMPAIR for compressor systemsCompressed air filterType: CF 0087B ZPFabric no: 3363006 / 05 / 005Operating pressure: max. 16 barThreaded connection: G 1 1/2Flow rate: approx. 8.5 m³/min Filter element no: CE 0087B- Filter housing made of aluminiumWeight: 5 kgDimensions L x W x H 125 x 110 x 420 mmgood condition; used
Beck Wand 1000/2000 Extraction Wall Extraction wall Type: Beck Wand 1000/2000 Extraction wall made of sheet steel, with 5 suction slots made of perforated sheet metal evenly distributed. For connection to a central extraction system via a suction nozzle at the top center of the extraction wall. Cleaning opening can be unscrewed at the bottom of the front of the wall. Uses: Extraction of process air during grinding and milling Extraction of gases and light dust Extraction of powder mix or other stationary dust-forming processes Width: 1000 mm Height: 2000 mm + 100 mm nozzle Depth: 300 mm Suction nozzle: NW 250 top center Recommended extraction capacity: 3000 m3/h Paintwork: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer's price: 2970,-€ More items - new and used - can be found in our shop! International shipping costs on request!
maximum number of results exceeded
please refine your search
