oil unit used for sale

Manufacturer: IMA Radienschleifeinrichtung oben und unten, Spare part from machine: IMA, Profile sanding unit: yes, for left machine side: yes, Own drive: yes, Total hight mm: 600, Max. roller diameter: 40, Slewable horizontally: yes, Sanding belt hight: 20, Slewable sanding head: yes, Sanding belt length max mm: ca.2100, Main engine kW: 2 X 0,25, Belt clamping pneumatically: yes, Hight adjustment by hand wheel: yes, radius sanding device: yes, Oscillation: no,

Manufacturer: Weger Zuluftgerät, Type: ZL 30 S, Year: 2013, Control: no, Zuluftleistung m³/h: 6000, Kw output: 2,2, Heizmedium : Warmwasser , Temperatur vor-rücklauf: 90-70, Taschenfilter Typ: yes, Pumps: no, Year :2013

Manufacturer: Homag, Spare part from machine: Homag KL 79, Edge sanding unit: yes, for left machine side: yes, Own drive: yes, Total hight mm: 450, Installation width mm: 350, Max. roller diameter: 80, Speed rpm: 1450, Pneumatically controlled: yes, pneumatisch gesteuert : yes, Sanding belt hight: 150, Sanding belt width max mm: 150 X 2100, Sanding belt length max mm: 2100, Main engine kW: 0,5, 2 belt speeds: 1, Belt clamping pneumatically: yes, Oscillation: yes,

Manufacturer: Rippert, Type: Abdunstwand, Year: 1990, Control: hand, Filter surface in m³: ca.1800 X 2200 X 300, Exhaust air m³/h: 5000, Exhaust air m³/h: 5000, Year :1990

Manufacturer: Homag Eckenkopierschwabbeln, Type: FS 11/FS 10, Year: 1996, Ersatzteil aus Maschine: Homag KF, für Maschinenseite links: yes, für Maschinenseite rechts: yes, Polieraggregat: yes, Eckenkopierenfunktion: yes, Motorenanzahl: 1, Bürstendurchmesser mm: 2 X 1405017, Bürstenbreite mm: 50, Volt/Hz: 380/50, Horizontal Rollentastung: yes, pneumatisch ansteuerbar: yes, Bürstendurchmesser mm: 2 X 1405017, Bürstenbreite mm: 50, Volt/Hz: 380/50, Horizontal Rollentastung: yes, pneumatisch ansteuerbar: yes, Year :1996

Manufacturer: Homag, Type: Schwabbelaggregate, Year: 1996, Ersatzteil aus Maschine: Homag KF, für Maschinenseite links: yes, für Maschinenseite rechts: yes, Polieraggregat: yes, Oszilierend : yes, Motorenanzahl: 2, Bürstendurchmesser mm: 150, Bürstenbreite mm: 30, Kw output: 0,25, Volt/Hz: 30/50, Drehzahlen U/min: 2850, pneumatisch ansteuerbar: yes, Bürstendurchmesser mm: 150, Bürstenbreite mm: 30, Kw output: 0,25, Volt/Hz: 30/50, Drehzahlen U/min: 2850, pneumatisch ansteuerbar: yes, Year :1996

Manufacturer: IMA, Type: Schwabbeln, Ersatzteil aus Maschine: IMA Combima, Polieraggregat: yes, Oszilierend : yes, Kw output: 0,55, Volt/Hz: 220 / 380, Drehzahlen U/min: 3.000, Kw output: 0,55, Volt/Hz: 220 / 380, Drehzahlen U/min: 3.000, Preis pro Stück Euro: 1.000, Gebraucht: yes, Preis pro Stück Euro: 1.000,

Cooling unit EPCS -Model: QSI-2-6GE-40Y-H4 -Compressor type: 6F-40.2Y (x2) -Volume: 151.6 m3/h (x2)) -Cooling capacity: 201.8 kW at -5°C/40°C, 166.2 kW at -10°C/40°C, 85.6 kW at -25°C/40°C -Dimensions: 4800 x 2300 x 2250 mm -Number of fans: 4 x 1000 mm -Year of production: 2018 -Quantity in stock: 1 -Condition: used in good condition

Power 4.3 kW, 220 V 50/60 Hz, Weight 57 kg R410A refrigerant. 1000 g 5 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.

: 32 mm direkt : 1:1,25 angle adjustable from - to: -20/ +20 Grad weight: 17,0 kg dimensions: 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power 1.1 kW, 220 V 50/60 Hz, Weight 55 kg R410A refrigerant. 970 g 3 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.

Key data: 300 °C, 2 kW, 144000 W

used oil temperature control unit with 5.5 kW pump max. pre-fuse 80 A electr. Connection 35 kW little used

volume capacity: 60 l/mim engine output: 2 kW turning speeds: 2850 U/min feed pressure: 9 bar Dimensions (LxWxH): 2400x1060x560 mm Total Dimension: 2400x1250x1200 mm empty weight: 280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic power unit with pressure accumulator

Composite system houses with 4 pcs compressor Bitzer screw Type: HSN 7471-75-40P Cooling capacity 1351KW at minus 41 °Celsius evaporation temperature. Including condenser, oil cooler, control box, etc. with Economiser. Refrigerant R404A, R507A, R449, etc. Can be used for blast freezers or freezers. Price on request 0043-6641838175 or infofrigocom.at

Horizontal Plate Freezer Self contained with built in Gram Compressor Pack 6 station In cabinet Needs service/overhaul "AS IS"

Key data: 4 , 14 mm

Multiple drill head from Romai, Sigloch & Schrieder up to diameter 14 mm in steel 4 stations, automatic and manual switching 2 speed ratios choiceable (direct and reduced) incl. adapter MK 4 and flange

Temperature range: Max. 30 °C heating capacity: . kW Cooling capacity: . W circulating medium: 30 Grad total power requirement: 4,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 °C, 8 kW, 30 W

HB-Therm HB-100Z1 temperature control unit with water medium for a maximum temperature of 100 °C. Heating 8 kW, cooling 30 kW, pump 1 kW, 60 l/min, 60 m. In good condition, ready for use. Please also note our large selection of other used plastic processing machines. All our machines can be viewed on site via video and tested in person.

table length: 1300 mm table width: 800 mm stroke height: 1010 mm weight max. in kg: 1000 kg : 190 mm connected load frequency: 380 V total power requirement: 0,75 kW weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,3 x 0,8 x 0,2 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 28000 kg Loading weight per level: 2000 kg Number of load levels: 2 x 7 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,7 x 2,55 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 15000 kg Loading weight per level: 3000 kg Number of load levels: 5 Stk. Recommended material length: 6000 mm Column width: 2 x 2000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 30000 kg Loading weight per level: 3000 kg Number of load levels: 2 x 5 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lamier FL 7B 4kw extraction system Power 4kw Number of bulk bags 2pcs Diameter of bags fi600mm Number of filter bags 32pcs Diameter of filter bags fi 200mm Filter bag length 1550mm Bag shaking system Inlet port diameter 300mm CE Certified Dimensions: height 370cm, width about 260cm, depth 110cm

impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Crestline The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 500-10,000g | filling hopper capacity: 100 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 2.75kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-3000g | filling hopper capacity: 50 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1.4kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 10-5000g | filling hopper capacity: 50 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 2.25kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 3-500g | filling hopper capacity: 30 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-1000g | filling hopper capacity: 30 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1.4kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 1-200g | filling hopper capacity: 15 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Compette linear unit, dismantled, max. stroke 900/1220mm, , used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company as part of a machine disassembly and is in very good condition. The photos show the linear unit mounted on a swivelling blasting table. One unit has the motor on the left, the 2nd unit has the motor on the right. The parts have already been dismantled! Complete linear unit with the following scope of delivery: - Electric motor Siemens, 1LA7096-4AA11, 1.5 KW, 1420/min, - Zimm lifting gear I=6:1, 24mm stroke/sec. - Max. stroke without carriage only with threaded nut 1220mm, - Max. stroke with slide approx. 900mm - Trapezoidal threaded spindle 1270mm, with bellows, D35mm, 6mm pitch, - Bearing block for spindle with mounting bracket - Bronze threaded nut with lu ...

Suitable for extracting oil mist., Nominal volume flow: 950 m³/h, noise level: 71 dB (A), number of revolutions: 2850 rpm, Dimensions W x D x H approx.: 525 x 592 x 781 mm, Weight approx.: 55 kg, Connected load approx.: 0.75 kW (400 V / 50 Hz),, colour: Grey

Hydraulic power unit with tank and internal Pump. • 15 kW electric motor. •Switchboard Control box and cable for electrical Connection. • Heat taischer integrated. •Oil filter with electrical monitoring. • Oil temperature monitoring. • Float switch (oil level) with electric Surveillance. • Rexroth Hydronorma Relief valve. •Window Oil level. • Oil connection cables included.

Gestra Condensate Compensator 50 l, 8 bar stainless steel with connection flanges DN 50, DN 80, DN 20, with stainless steel shut-off valve DN 20, emptying oval flange and 3 foot spindles + Check valve DN 80 Cylinder 240 Klepper floors each 100 long

Name: High Voltage Resistor Unit Manufacturer: RIME Dimensions: 205 × 135 × 280 mm Weight: 4.76 kg Condition: Used. With visible signs of wear (e.g. rust on screws), but overall in good condition. No breaks or visible defects. Technically not tested. Additional information: Solid resistor unit with four ceramic-insulated coils, suitable for industrial applications in the high voltage range.

Name: High Voltage Resistor Unit Manufacturer: RIME Dimensions: 205 × 135 × 280 mm Weight: 4.76 kg Condition: Used. With visible signs of wear (e.g. rust on screws), but overall in good condition. No breaks or visible defects. Technically not tested. Additional information: Solid resistor unit with four ceramic-insulated coils, suitable for industrial applications in the high voltage range.

Nummerierwerke Buchdruck / Numbering Units Letter Press Leibinger NW

2.090 litre, Stock number: T3638, Litre: 2.090, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 5 pcs., Item: Filter tank, Standing: Hanging in legconsol, Top: Dished, Bottom: Dished, Filter: In the top and bottom, Inner diameter: Ø 800 mm, Total height: H 4240 mm

HOT-AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. (adjustable width) on the web as per photo, while slitting, Adjustable air-blow to determine the sealed ribbon width Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machine is offered RECONDITIONED and TESTED

Manufacturer: TOOL-TEMP Model: TT-28000 DG Type of Machine: Temperature Control System Voltage (Volt): 3-phase, 380–415 V Power (Watt): 3 × 9000 W Frequency (Hz): 50 Hz Refrigerant Gas (Gas): R-134a Refrigerant Quantity: 10 kg I have to guess the year it was built—around 2013. Find more here - .ucymachines/ Contact us at - sales@ucymachines

A Wieland extraction system is available. Engine speed: 2930rpm, power: 18.5kW, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

Key data: 140 °C, 10 kW

Max. heating capacity - 140°C Heat transfer medium – water Power: 10 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended

Tightening Banding Machine for Shrink Film

Key data: 140 °C

Temperature control unit of the tools - Tool Temp TT-118K / MP-988 (3 pcs.) Year of Make: 2020 Location: Lodz, Poland Description: Max. heating capacity - 140°C Heat transfer medium - water Power: 29.3 Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 160 °C, 20 kW

Temperature control unit of the tools - Single STW 180/1-18-70-N1.1 (2 pcs.) Year of Make: 2013 Location: Lodz, Poland Description: Max. heating capacity - 160°C Heat transfer medium – water Power: 20 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request