oil unit used for sale

High-performance flue gas fan very good condition closed wing for high pressure 15kW V-belt transmissions

Suction fan S 250 Motor power 5.5 KW 400V Air capacity 6700m³/h

3.6kW 3000m³/h 4200 PA as good as new

Control unit for overpressure encapsulation system -Number: 1x available -Price: per piece -Dimensions: 270/160/H90 mm -Weight: 1.4 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Drive: 7.5 kW 1440 rpm -Dimensions: 360/310/H660 mm -Weight: 86 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Transfer in current condition as seen -1x: punching bracket as shown in the pictures -Manufacturer: CEWE -1x: type LWS 35-150 -Dimensions: 300/80/H220 mm -Weight: 13 kg

Filter control valve, switch-on valve, maintenance unit, water separator -Connection: 3/8 -Number: 2 pieces available -Price: per piece -Dimensions: 65/60/H190 mm -Weight: 0.5 kg

Motor power 18,5kW Air capacity approx. 12,500m³/h Pressing 3500PA Good condition

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Deprivation via briquetting press with a nominal throughput of 100 kg/h Material-dependent

with 6,000 m³/h air volume. Standard emptying in 3 containers. Reliable, quiet and easy to use. CLEAN AIR BLOWER 7.5 KW Filter area 30 m2 Footprint 350 x 110 x h 244 cm

Quills, processing unit, automatic drilling machine, drilling machine, standing drill, multi-spindle drilling machine -2x: quill machining units -1x: Horizontal -1x: vertical -Max. Feed: stroke mm -Speed: rpm -Built-in drill chucks: 1.5-13 mm -Dimensions: 1050/1205/H1550 mm -Weight: 222 kg

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of the screwing unit - adjustable distance between screwdrivers 42-110 mm - Automatic screw connection - automatic automatic movement alignment - the ability to work as a screwdriver - screw depth sensor - powerless steering control - Specific feed account Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - screw depth sensor - horizontal pressure

Control unit, control panel, control panel, control unit, keyboard, screen, control -Comes from a CNC machining center -Manufacturer: Visual Data -Type: MC31 GHEB1 HOM -Dimensions: 482/365/H265 mm -Weight: 12 kg

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Standard emptying in 3 containers of 200 litres each Installation dimensions 350 x 110 x h 245 cm Reliable, quiet and easy to use.

feed pressure: 250 bar liter capacity: 9 l weight of the machine ca.: 10 kg dimensions of the machine ca.: 1,15x0,4x0,4 m hydraulic gear pump - for more details see photos - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary unit, rotary device, turning table, conveyor belt, container rotary device, welding rotary device, welding device -Drive motor: 0.15/0.60 kW -Speed: 15/64 rpm -sealed: slewing ring -Device is: pneumatically tiltable -Dimensions: 2520/800/H380 mm -Weight: 524 kg

Control unit, control, for power generator, emergency power generator, generator, aggregate, power generator, emergency power generator, power generation aggregate -Type: Compact 166-S -Number: 2x controls available -Price per piece -Dimensions: 490/110/H110mm -Weight: 2kg

Hydraulic pump unit Part Number : Moog - D954Z8001 Arburg - A10VDC 18 DFR1/31R The spare part is in good condition nevertheless, this is a used items, which has slight signs of wear, or may have.

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 63 bar -Liter flow rate: 6 l/min -Hydraulic tank: 40 liters -Dimensions: 690/400/H700 mm -Weight: 100 kg

Filter control valve, switching valve, maintenance unit, water separator -Manufacturer: Festo, Maintenance unit LFR-D-Maxi / HE-D-Maxi -Connection: 1/2 -Quantity: 16 pieces available Price: per piece -Dimensions: 220 x 270 x 90 mm / 280/270/130 mm -Weight: 2.5 kg/pc.

Filter tray -Type: LR-D-MIDI-A -Pressure: max. 12 bar -Weight: 3 kg

Component slide unit, pneumatic cylinder, air cylinder, pneumatic plunger, air plunger -Stroke travel: 50 mm -Air inlet and outlet: adjustable -Weight: 3 kg

Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Punching units, punching unit, punching jaw, punching tool, non-driven latching and shearing units, forming jaw -Ironing material: Aluminum -Punch dimensions: see photo with dimensions -Quantity: 2 pieces -Price: per piece -Dimensions: 240/145/H210 mm -Weight: 22.5 kg/pc.

Corning 048E88-611-31-29 MIC Unitized Tight-Buffered Cable, Plenum, 48fibres,OS2. The roll weighs just under 300kg. Specifications General Specifications Environment Indoor Application General Purpose Horizontal, Vertical Riser, Plenum Cable type Tight-Buffered Product type Distribution Flame rating Plenum (OFNP) Fibre Category single-mode (OS2) Temperature Range Storage -40°C to 70°C (-40°F to 158°F) Installation and assembly 0 °C to 60 °C (32 °F to 140 °F) Operation 0°C to 70°C (32°F to 158°F) Cable Design Central Element Jacketed GRP Fibre Count 48 Number of Active Tubes 8 Subunit Colour yellow Subunit Diameter 4.40 mm (0.17 in) Tight buffer colour subunit Blue, orange, green, brown, grey, white Tensile Strength Elements and/or Armouring - Layer 1 Dielectric strength members Number of ripcords 9 Outer jacket material Flame-retardant Ou ...

Hydraulic Press, Oil Hydraulic Press, Pressing Machine -Manufacturer: Novopress, Hydraulic unit for press machine -Pressure: max. 150 bar -Type: unfortunately no type designation -Accessories: see photos -Total dimensions: 410/310/H440 mm -Weight: 19.1 kg

Delta New Poluclean P30 Dust Extraction System Delta New Poluclean P30 Dust extraction system 400 V 5.5 kW 3500 m³/h 95 liters Weight: 361 kg Metrics: HxWxD = 300 x 100 x 97 cm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. Further extraction systems in other sizes - new and used - can be found in our shop! International shipping costs on request!

Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi, control unit from Bierrebi TA 103 automatic cutting machine -Dimensions: 435/225/H80 mm -Weight: 1.5 kg

Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi, control unit from Bierrebi TA 103 automatic cutting machine -Dimensions: 435/220/H90 mm -Weight: 1.6 kg

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

High-frequency ignition device, heating, gas and oil burner, automatic gas burner, gas relay, Control box, burner control -Manufacturer: Siemens, automatic gas burner -Type: LFL1.333 -Dimensions: 120/105/H105 mm -Weight: 1.2 kg

Bitzer unit Two-stage for freezer and blast freezer, with 2 compressors Bitzer type S6G-25.2Y, including condenser, collector Control box Converted to the compressor. Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Power supply, switching power supply, CNC control, E-STOP UNIT -Manufacturer: Fanuc, E-STOP UNIT CNC control emergency stop unit -Type: A05B-2400-C451 -Dimensions: 315/100/H180 mm -Weight: 5 kg

CTP UNIT HB TOPSETTER (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Ser. No.: 013910086 Counter: 115.778 plates Format (cm): 52 & 74 with software license for both formats Equipment / Additional information: With integrated plate punch With washing station AZURA C85 (M.No.: 92700-0307) Plate stacker, advand PST 48 ( M.No.: M211348121L) Software, complete RIP (6 years old) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Swivel unit, OSE-A57/1-8, Schunk, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Extraction dedusting Walther NOVA 2000 with 2 extraction arms mobile on wheels 2 pieces available Very good operational condition!

Card gluing unit for MM saddle stitchers Make Müller Martini Model 315.0402 Year 1990? 1995? Min. size 40 x 60 Max size 250 x 350 mm Stitches 1-5 Details interface changed to modern tocuh screen, Nordson hotmelt kettle with heated hose and glue appliance head Available direct

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, cooling unit, cooling unit -Manufacturer: Fronius, Cooling unit for Frowig 260 AC/DC TIG welding machine -Type: FK 31 -Flow rate: max. 6.5 l/min -Dimensions: 250/210/H650 mm -Weight: 19 kg

Krauss-Maffei SPA 12/25 RP Manufacturer: Krauss-Maffei Type: SPA 12/25 RP Type: Hydraulic power pack Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!

Central processing unit, control, switchgear, CPU, SPS, SPS control -Manufacturer: Mitsubishi, SPS control from tray sealing machine Inauen VC999/ TS 1200 N -Type: FX2n-48MR-DS -Total dimensions: 295/90/H83 mm -Weight: 1.3 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg

Extraction Dedusting Nedermann Type 663 with 2 extraction arms Very good condition, straight from production!

CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 300 bar -Flow rate: 20 l/min -Individual components: see photos -Dimensions: 1500/1030/H1210 mm -Weight: 555 kg

Beck Series Packer SX 1750

ALKO ECO-JET 35/3N clean air extraction Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A)

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 200 bar -Flow rate: 48 l/min -Individual components: see photos -Dimensions: 1580/1040/H1200 mm -Weight: 632 kg

CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...