oil turbine used for sale

Compressed air turbine vibrator, vibrator, external vibrator NICE VIBRATION NCT 55 ( NCT55 ) Working torque: 0,545 cmkg frequency: 11000 - 15760 1/min operating pressure: 2 - 6 bar air consumption: 386 - 918 l/min compressed air connection: 3/8 ( inch ) used, tested ! Dimensions (vibrator, without connectors): 160 x 73 x 100 mm

SGT 400 YOC 2010, 10.000 hours only 6 years in operation at peak load conserved 50 Hz 11 kV 14,300 kVA 1500 rpm still complete installed. relocation can be offered

Steam turbine Siemens SST400 Year: 2011 Disassembled and put in a storage. Very low working hours. Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Turbo gear unit Flender-Graffenstaden TX80/3 Transformer Siemens S10-40000/110 Condenser Full set of manual books No boilers, no voltage control cabinet (7) Steam turbine Siemens SST-400 Year: 2011 Never used and never installed. Still in original wooden crates. Packing lists. 7 sets available Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Control system Accessories Full set of manual books No boilers Price: on request

Vacuum cleaner motor, suction turbine, wet vacuum cleaner -from: scrubbing machine make Gansow -Number: 17x available -Price: per piece -Dimensions: Ø 145/H210 mm -Weight: 2.7 kg

Allison Detroit Diesel Turbine Allison Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> heating oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz diesel 160 HP (turbine launcher) 10 kW generator set – Deutz engine (auxiliary power)

Kawasaki Model TD80A-1 7.2 MW Type TD80A Rated Output 7216 kW Voltage 11000 V Frequency 50 HZ Current 446 A Phase 3 Gas Turbine M7A-03D Generator NTAKL-DC YOM 2011 low hours 7836

TAURUS 70 Gas Turbine Year Of Make: 2004 Total running hours: 58.000h Total hours since last overhaul 28.600h Turbine 15158 RPM 60 HZ / 15143 RPM 50 HZ Alternator 1500 RPM 50 HZ 7200 Kw at 9000 KVa 11000 Volts

Kaplan turbine Escher Wass with standing shaft, used very good condition Gradient 7.00m-7.2 m Water volume 6000l/sec, power 500 hp, speed 375T/min

GE MS5000P Nominal Pot 20.000kw each , 1600 work hours

Combined Cycle Gas Turbine Power Plant 75 MW/50 Hz – Zero Hours This equipment was delivered in 2017 by an EPC contractor who selected Rolls-Royce and Siemens as main equipment suppliers. This was a greenfield project and therefore delivery contained all equipment needed for 75 MW power plant operation, like fuel gas treatment plant, water treatment plant and complete switchyard with step-up transformers Manufacturing year: 2017 Gas turbine: Rolls-Royce Trent 60, Dry Low Nox Steam turbine: Siemens SST-300 Step up tranfomers: 2 pc Alstrom 11kV to 154 kW Complete switchyard: Siemens 154 kV Nominal output 100%: 60 MW + 15 MW Max efficiency: Single cycle 42 %, combi cycle 54% Heat recovery steam boiler: 30 bar / 300 C Water treatment: Sand and active coal filters + RO Documentation: Complete original in English Delivery: Complete plant equipment from water and gas t ...

Taurus 60 Turbine Generator Set Solar Taurus 60 T7301 Gas Turbine Engine Runnig hour 1165 hour after last Overhaul Output Power 5200 Kw Gearbox Solar Gear Unit 1165 hour after last Overhaul Type: Epicyclic Leroy Somer Generator 50 Hz

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

Used and refurbished turbine mill from Tecnoecology for the digestion of old cables, especially fine strands or computer cables. Balling takes place at about 3,000 rpm. The tools are rotatable and have 4 usable edges. The turbine mill can be operated stand-alone or integrated into an existing system without a pellet mill. The machine has a 20 kW drive and can process up to approx. 300 kg of material per hour.

GE Model : LM6000PA Power Output : 42 MWe ISO condition Voltage : 11KV Frequency : 50Hz

OEM Bearing Assembly - Turbine Side (p.n. 38) for ABB VTR 400 Turbocharger Bearing unit is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

OEM Bearing Assembly - Turbine Side (p.n. 38) for ABB VTR 200 / 201 Turbocharger Bearing unit is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

SIEMENS SGT800 gas only turbine Year: 2022. Brand new. OEM warranty 3 x 56MW, 60Hz No photos are available, units are still at the Siemens factory Only 3 units are available

Description: The almost new 8 MW transmission test station is operated from a central control station. Some of the test energy input can be fed back into the power network. Inventory number: 9000945 , Year of construction: 2018 Data on the three-phase asynchronous machines Nominal output: 7.7MW Maximum output: 8.47MW Nominal speed: 1150/min Maximum speed: 2200/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm Main shaft data Nominal speed: 8.99 rpm Nominal torque: 6000kNm Maximum torque: 8800kNm Cooling system Cooling capacity of the cooling tower: 900kW Coolant volume flow: 160m³/h at 4 bar and 30°C Nominal pressure hydraulics Hydraulic system main shaft: 250 bar at 100 l/min Hydraulic system quick coupling: 300 bar at 1 l/min Hydraulic system generator (lifting/lowering) 150 bar at 8 l/min Oil system: 8 bar at 120 l/min General data Operati ...

Description: A total of 2000 kW generated since installation. 1 generator is included in the installation See PDF for details Approx. Onsite Dimension. (l x w x h): 9,000 x 1,500 x 1,500 mm, weight approx.: 1,100 kg

Diesel tank, storage tank, service station, tank plant, steel tank, storage tank with 10,000 litres of content according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. Dimensions: L = approx. 5.30 m / D = 1.60 m / weight approx. 2.2 tons. / ex works, freely charged. General: You will r ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 20,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 6,840 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Of course, you can also use your tank ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 9,990 mm Diameter approx. 2,000 mm Weight approx. 6,500 kg Of course, you can also use your t ...

Alfa Laval MMB 305 Skid

250 kW, max. 8 bar, 35 m3/min.

250 kW, max. 7.5 bar, 34.3 m3 rpm, oil-free, air-cooled.

500 kW, max. 7.5 bar, 83.1 m3 rpm, oil-free, very good condition, with suitable atlas Copco MD 1800 dryer.

500 kW, max. 7,5 bar, 83,1 m3/min, oilfree, in very good condition, with matching dryer Atlas Copco MD 1800.

200,0 kW, max. 10,00 bar, 30,00 m3/min. Oil-free, water cooled. Excellent condition.

55.0 kW, max. 7.5 bar, 7.60 m3/min.

55,0 kW, max. 7,5 bar, 7,60 m3/min.

315.0 kW, max. 10.0 bar, 45.70 m3/min.

315,0 kW, max. 10,0 bar, 45,70 m3/min.

MAB 103 Skid With Heater Max. 1,5m3/h

160.0 kW, max. 7.50 bar, 27.40 m3 rpm, oil-free, air-cooled

160,0 kW, max. 7,50 bar, 27,40 m3/min, oil-free, air cooled.

90.0 kW, 8.0 bar, 12.78 m3/min. Oil-free, air-cooled.

90,0 kW, 8,0 bar, 12,78 m3/min. oil-free, air cooled.

45,0 kW, max. 7,50 bar, 6,06 m3/min. Oil-free, air cooled.

315 kW, max. 10.0 bar, 41.20 m3/min. oil-free, water-free. Voltage 3300V, 3ph, 50 Hz. New control electronics Mk4.

315 kW, max. 10,0 bar, 41,20 m3/min. Oil-free, water cooled. Voltage 3300V, 3ph, 50 Hz. New controller Elektronikon Mk4.

132 kW, max. 10 bar, 18,3 m3/min. Oil-free, water cooled

400 kW, max. 8 bar, 61,32 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 working hours.

75 kW, max. 8,60 bar, 11,20 m3/min. Oil-free, air cooled.

110,0 kW, max. 3,50 bar, 23,22 m3/min. Oil-free, water cooled. Air end (screw) has 18000 working hours.

132,0 kW, max. 3,50 bar, 24,30 m3/min. Oil-free, water cooled. Air end (screw) has 18000 working hours.

132,0 kW, max. 2,20 bar, 43,02 m3/min. Oil-free, air cooled. 2 pieces available.

200,0 kW, max. 8,60 bar, 30,72 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 hours. New controller Elektronikon Mk4.

160 kW, max. 7,5 bar, 27,80 m3/min oil-free, water cooled. Air ends have 32000 working hours.

250 kW, max. 10 bar, 37,60 m3/min, oil-free, water cooled.

250 kW, max. 10.50 bar, 34,86 m3/min. Oil-free. LP and HP air ends are new Mk2 version and have 13000 working hours.