oil production line used for sale

PAGUS

Filling line for stand-up pouches - LINAPACK Year of construction: 2018 Bag types: Stand-up pouches of all types Shape cut Euro hole Spout and cap 45° One format set is required per bag format Format set for 250ml stand-up pouches with Euro hole available. Filling process: Hot filling at 71 - 85°C Filling goods: previous filling goods - were various cocktail drinks Output: approx. 50 bags / min depending on the product - 750-900 liters/h 1. Buffer tank Equipped with agitator, flow meter (E+H), level indicator, cleaning ball, pouring basin. The buffer tank is fully automatically connected to the pasteurizer and its control system. Volume: approx. 1,000 liters 2. Pasteurization unit PAS-900 For the gentle heating of RTD beverages or similar products. With a capacity of 750-1.000 liters per hour. Previous energy source: steam The pasteurizer work ...

Qty. 1 Second-hand full automatic mat and shine anodising coating line Mfc.: CISART Built: 2013 Stopped: Capacity: 1,800,000 pieces of profiles per annum Maximum Part Length: 3 m Requested area: approx. 630 m² Operators: 4 - 6 Estimated Full Power Consumption: 960 kW +/- 10% Voltage: 415 V, 50 Hz, 3 ph. Heat Consumption Max.: 500,000 Kcal/H +/- 10 % Water Consumption: 3 m³/h Water Consumption (TAP) by Customer: 10 m³/h Air Consumption: 1 m³/h Heating System: Electricity & Gas Acid Recovery System: 3 kg/h CHILLER 400,000 + 160,000 kCal/hr 40 °C Max. Ext. Temp. Water cooling range: 9-14 °C 190 + 80 kW Dozing System Quantity: 8 Eye & Body Wash Quantity: 2 Qty. 49 Tanks, 3.5 x 1.1 x 3.0 m – L x W x H Weight: 10 ton each Tank made of 2,5 mm thick AISI304 sheets

Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for its own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-Phase Synchronous PM Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used The plant is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

10 x WICHMANN AXAG - AXA liner 10 pieces available in our stock in Istanbul Turkey in Very good condition Please contact : info@fin-marine.com

Butter Forming & Wrapping Machine Manufacturer: BENHIL Type: 8380 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k

Used three extruders with die - head/three layer extruder from POLY TECH model HP 1800/3/100/55/55. New: 2000. 1) Head/Matrix - Slot of the die - 2,26 - Die diameter - 220 mm - Thickness 25-130 microns - Capacity 250-300 kg / hour 2) Matrix/Head - With efficient heating system (set of heaters with sensors PT/100 temperature sensors) - Three described Poly Tech extruders A) Extruder fi 100 mm L/D 30 with 150 kW motor drive . ZAMBELLO/ITALY drive gearbox TYPE RPU 280 E RPM 1400 B) Extruders fi 55 mm L/D 30 with 60 kW motor drive pcs. 2 ZAMBELLO/ITALY gearboxes TYPE RPU 180 E RPM 1400 The described extruders have a gravimetric system from DOTECO/ITALY Model GRADO IIS/GO 4100940 equipped with a metering system with computer readout on the measuring cabinet. Complete plasticizing systems including drive gears and main driv ...

fully automatic cake cutting machine Krumbein Type: KSSM 3.0 D for cutting 60x40cm and 60x20cm sheets long and cross-section 60 x 40 cm sheets digital control Siemens Piece size individually adjustable removable knives easy cleaning incl. accessories

Rademaker Bestreungslinie Stainless steel cladding Stainless steel band analog control can be controlled together or individually 269 operating hours Dimensions individually: 1st table: 92x110x120cm W/D/H 2nd table: 92x107x110cm W/D/H

Tuna Packing and Seaming Line: A complete, automated system for tuna packing and seaming, composed of the following high-performance equipment: De-palletizer for Empty Can Feed: Efficiently separates and feeds empty cans for the packing process. View details Magnetic Elevator: Transports cans using magnetic technology, ensuring smooth and secure handling throughout the production line. View details Tunipack GFDC Tuna Packing Machine: Fully automated tuna packing machine, designed to efficiently pack tuna in a 150 mm format, ensuring optimal packing speed and precision. View details Hermasa Transporter with Brine Doser: A reliable transporter system, integrated with an automatic brine doser to ensure precise application during the packing process. View details Oiling Machine for Fish Canning: Specialized machine for the uniform application of oil to fish, enhancing the preservat ...

Micro-process-controlled line unifier for the automatic unification of multi-lane packs coming out of a packaging machine. - Package length adjustable up to 550 mm trigger length Original price in 2007: 17.00,00 € - Number of lines selectable from 1 - 6 tracks - Electric tool depth adjustment -Metrics: ESV 03 = Length 1560 mm / Width 610 mm - Stainless materials Low-maintenance assemblies result in a robust, high-performance system. A stand-by function ensures that all belts stop when no more packs come out of the packaging machine. This ensures that all packages on the line unifier are completely cleared and fed into the price labelling system.

The Continuous Galvanizing Line No. 2, built in 1985 and featuring equipment from IHI, Mitsubishi Heavy Industries, and Daido-EFCO, delivers high-quality galvanized steel for various applications. With a line length of approximately 228 meters and a production capacity of 144,000 tons per year, it efficiently processes low-carbon steel coils with widths ranging from 610 to 1,220 mm and thicknesses of 0.15 to 0.8 mm. Production ceased in December 2016. Equipped with a high-capacity furnace and air knife wiping system for coating control. The skin pass mill adds superior surface quality, while the tension reel provides consistent coil handling. Make: DAIDO-EFCO (Furnace) IHI (Galvanizing and Overall Equipment) MITSUBISHI HEAVY INDUSTRIES (Skin Pass Mill) Year of manufacture: 1985 Mothballed since: Ceased production in December 2016 Production capacity: 144,000 tons per yea ...

The Coil Preparation Line, built in 1987 by Sumitomo Heavy Industries, represents a robust solution for processing low-carbon steel with high accuracy and efficiency. This line delivered reliable performance for nearly three decades at JFE Steel's Keihin plant before ceasing production in December 2016. The equipment includes shearing, welding, straightening, side trimming, and tension control capabilities, ensuring precise coil preparation. Designed for a maximum speed of 1,100 mpm, the line efficiently supports a range of production needs. Make: SUMITOMO HEAVY INDUSTRIES Year of manufacture: 1987 Mothballed since: Ceased production in December 2016 Rolling direction: Right to left (right hand line) Line length: 33 meters approximately Processed material: Low carbon steel Strip width: 457 – 1,000 mm Strip thickness: 0.15 – 0.6 mm Coil inner diameter: 419 ...

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

SPECULAS BISCUIT LINE - INCLUDING PACKING MACHINE , DISPENSER , BISCUIT LINE, OPEN , MULTIHEAD PACKING MACHINE

Originally commissioned in the 1980s, the Tandem Cold Mill at JFE Steel's Keihin plant undegone a significant modernization in 2007 to meet high standards. Upgraded with a state-of-the-art pickling line and carrousel tension reel, the 5-stand PLTCM integrates advanced technologies from industry leaders Mitsubishi, Hitachi, and IHI, enhancing the system’s reliability, productivity, and quality control. Make: MITSUBISHI-HITACHI-IHI Year of manufacture: 2007 (integrated to TCM from 1980s) Mothballed since: Ceased production in March 2019 Production capacity: 1,200,000 tons per year Rolling direction: Right to left (right hand line) Processed material: Low carbon steel Strip width: 600 – 1,350 mm Strip thickness: 1.8 - 4.5 mm entry 0.12 – 1.6 mm exit Coil weight: max. 32,000 kg entry max. 45,000 kg exit Line speed: 250 mpm PL section  ...

MANUFACTURER: Niro Atomizer CAPACITY: 1.183 Kg/h, , APPLICATION: Milk powder and whey powder production. MACHINE COMES WITH: External vibro fluid bed dryer, Niro F35 atomizer, powder cyclones, bag filters, air pre heating economizer unit, air heating unit with steam heat exchangers, vibro sieve powder calibration unit, air ventilators, air locks, rotary valves and many accesories...

Qty. 1 Second-hand bifilar pipe winding line Mfc.: GRAEWE GmbH Type: AEW 1000 Built: 1998 Tube dia.: 10, 12, 14 & 16 mm Coil core ID: 940 mm OD: 1250 mm Bifilar coiler Type: EW 1000 PLC Simatic S5 Consist of: De-coiler Coiler Ring coiler Bending unit Support table Cutting shear Binding device Electrical Control

COLOMBO AGOSTINO 225.400 coil stamping and punching line was built in 2006 in Italy by Colombo Agostino S.p.A. Its extensive machining capabilities and high reliability make it an excellent choice for series production of components, such as washing machine parts or automotive parts. The production process is fully automatic, thanks to a high-speed feeding system. It unwinds the sheet metal from the coil towards the work station, which features precision tools operating at a maximum force of 400 tonnes. The monolithic design of the machine further ensures high durability and stress-free operation. The COLOMBO AGOSTINO coil-fed punching machine weighs 75000 kg. The coil punching line is complete and consists of the following machines: – 400 t eccentric press: COLOMBO AGOSTINO – sheet metal decoiler: DEF CT 3/128 – coil lift table – sheet metal straightener RA 3000/4-8/120 A ...

SAVOYE INTELIS packaging machine was built in 2016 in France. The machine is used for example in halls or warehouses, for the fully automatic packing of carton shipping boxes made of corrugated cardboard. All of the devices included in the packaging line are independent and built on the plug and play” concept, which allows easy relocation and installation. The SAVOYE INTELIS packaging line consists of the following devices: – case erecting machine: INTELIS F12 – shrink tunnel: INTELIS T18 – box lid placing machine: INTELIS C12 – glue dispenser: NORDSON PROBLUE The packaging machine is equipped with intelligent conveyors which adjust to the load of the packages and the intensity of work, making the whole packing process smoother. The motors built directly into the rollers operate 100% electrically and thanks to their design and technology used, they save a considerable ...

ZASO MSA-4PS beam welding line was built in 2009 in Poland by ZASO Polski Sprzęt Spawalniczy. The machine enables precise longitudinal welding of, among others, plate girders, T-beams, I-beams and H-beams, using the MIG/MAG or SAW method. The applied technical solutions fully automate the process, with the guarantee of obtaining the highest quality welds. The machining process is performed by two torches with integrated correction slides, which allow them to be moved remotely in two axes. A special frame clamp system holds the welded parts throughout the process, without the need for preassembly or the use of special tooling. The overriding control system also synchronises the work travel with the welding power sources. The ZASO automatic welding machine is also distinguished by its modular work table, consisting of up to five modules, each 6 m long. It has an integrated cooling s ...

We can offer you a complete line of Breathable menbrance extrusion line,manufactured by Colines,Italy in 2009,the line has just installed and adjusted,never used for production,like new line.the products-- breathable menbrance is for making diaper and hygienic materials.the net web width is 2850 mm,2 extruders,a 90 mm and a 150 mm,,serious buyer contact us,please Please visit manufacturer's website: .colines.it to learn more about this line.

TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE CYLINDER LINERS OF BERGEN B 32:40 A AT OUR STOCK PART NO IS 102001 WE VE 2 PCS AT OUR STOCK. EX STOCK IZMIR TURKEY ADDITIONALLY WE VE MANY MANY OTHER MAJOR PARTS OF THIS TYPE ENGINE BERGEN B 32:40 A AT OUR STOCK PLS REFER LIST ON ATACHE IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ;

Used pharmaceutical machinery set. Set consists of: 1. Used EMPAK EA-1 labeling machine for automatic application of self-adhesive labels to all types of cylindrical packaging. Technical specifications: Maximum label dimensions: Length limited by package size Width: up to 120mm Label spool dimensions: Inner diameter: 40mm Outer diameter: up to 300mm Maximum throughput: Up to 6000 packages/hour Package diameter: up to 80mm Power supply voltage: 3N~50Hz 220/380V TN-S Overall dimensions: 1500x700x900 mm Weight: 130kg. 2. Used Empak TZZ capping machine/sealer. 3. Used Mewes & Goetzl drive-on scale, model: IT9000E, capacity up to 1000 kg. New: 2008

Available EMCII to SD machines - P76 - -> sold - P92 - P115 --> sold

see pdf attached

Lompas DN 250 GE FANUC Control Cabinet Control panel + Electric box for Lompass Lompass - armadio dei comandi terminale Lompas DN 250 Control cabinet + operator terminal Year of construction 1998 Control cabinet with control panel (control panel) for Lompas DN 250 pallet nailing machine; GE FANUC Series 90-30 Control; Control panel for machine operators; Ready for use until dismantling in June 2021, ready for loading #GE Fanuc Series 90-30 #GE Fanuc #GE #Lompas Original control switchboard from Lompas DN 250 with GE FANUC Series 90-30 System; price including Control Switchboard + manual control panel; System Work! dismanteling in June 2021, ready to load. Armadio di controllo originale con pannello di controllo per inchiodatrice pallet Lompas DN 250; GE FANUC Series 90-30 Controller; Pannello di controllo per operatori di macchine; Pronto per l'uso fino allo smontag ...

pdf attached

Bandwidth.. 1,500 mm Band thickness. 0.7 - 4.0 mm Coil weight... 20 to. Velocity 14 m/min. Working direction right/left

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

automatic case erector + case sealer T-100 BDE, case sealer T-10 year 1999, pallet loader PD-120, Thermal ink jet system Diagraph IJ 3000 ES autmatic erecting station + carton seamer T-100 BDE, carton sealer T-10 year of construction 1999, Layer palletizer PD-120, Thermal ink jet system Diagraph IJ 3000 ES

Ball bearing linear guide with 3 carriages, SHS55LC3DDHHC0-1140LP, THK, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws, sychron motors and linear guides in various designs. Please have a look at our website of IPV GmbH. Linear guide with ball chain type SHS55LC3DDHHC0-1140LP from THK consisting of: -1 pc. Guide rail 55mm x 1140mm long - 3 pcs. Carriage SHS55LC Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Available a complete dehulling line for oats, also efficient on spelt, sunflower seeds..output according technical notice about 3 tonnes per hour..Include all the machines in very good condition very very affordable price..Machines are like new.. list of machine available upon request request wellcome delivery to any destination possible.

Ball-bearing linear guide with 2 carriages, MR55-A2-1244-22-22-G1-V3-GP, Schneeberger, as good as new As good as new in original packaging! The high-quality part comes from a spare parts warehouse of a mechanical processing of a large automobile manufacturer, has been in stock for some time, is completely new and in the original packaging. Attention: We have many, bearing, high-quality ball screws, synchronous motors and linear guides in different designs. Take a look at our website of IPV GmbH. Linear guide with ball chain type MR55-A2-1244-22-22-G1-V3-GP of Schneeberger consisting of: -1 guide rail 55mm x 1244mm long - 2 pcs. guide car MR55-A2 Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we ...

MaK M25 Cylinder Liners 16 pieces available in our stock in Istanbul Turkey Max wear 0.15 mm Honing lines visible in good condition please contact: infofina-marine for more info

Technical data: Web width: 1,300 mm Lamination type: Duplex (two-ply) Adhesive system: 2-component, solventless Mechanical speed: 300 m/min Unwind diameter: 800 mm (shaftless, single-position) Rewind diameter: 800 mm (shaftless, single-position) Core diameter: 3" Web direction control: Integrated web guiding system Corona treatment: 1–2 corona stations Heating: Electric heating with temperature regulation system Coating rollers: Coating head with staggered application rollers for solventless adhesive, configured for accurate laydown control Main Features: - Shaftless single unwind station - Shaftless single rewind station - Duplex configuration for solventless adhesive lamination - Corona treater for surface activation - Electric heating for coating unit - Temperature control system - Web guide for precise alignment - Coating head with multiple rollers for fle ...

Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Głowice do wytłaczania - pakiet 19 sztuk różnych narzędzi, m.in. Kalibrator głowicy + płyty Głowica + kalibrator 2 x 130 Głowica 250 mm + kalibrator Austria Głowica + kalibrator Duża głowica rozszerzająca + kalibrator Mała głowica rozszerzająca + kalibrator Głowica + kalibrator dla Soffit 2 x 160 głowic Głowica parapetu 260 mm cena za wszystkie narzędzia 60.000 Euro.

Setter machine autonomous for pastry line Belt width 800 mm Settling length adjustable without substructure for sheet metal Condition very good, new settling belt

Linear drive, spindle axis, stroke 1135, EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Festo spindle axis, linear module, liner drive, linear slide EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Overall dimensions: 1625x130x110mm, approx. 55kg, slide 300x70mm, stroke 1135mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded i ...

Used, complete, fully automated herb and vegetable processing line This production line is designed for processing, grinding, and packaging herbs and vegetables. This modern, automated set of equipment allows you to transform raw materials into a finished, professionally packaged product – all in one process. The biggest advantage: the entire line is operated by just one person, minimizing labor costs and ensuring smooth and efficient production. Line composition and specifications: 1. Inteco Sp. z o.o. pre-mixer – capacity up to 1000 kg. 2. Inteco screw feeders – diameter 100 and 120 mm. 3. Condux-Werk (Germany) pre-grinding mill – mesh size 6–10 mm, 7.5 kW motor. 4. Spring feeders – diameter 50 mm, Chinese design. 5. Condux-Werk (Germany) fine grinding mill – mesh size 2–4 mm, 7.5 kW motor. 6. Inteco Sp. z o.o. mixer with feeder – precise product measureme ...

Humidification and sprinkling • Brand: Minipan • Lattice inlet and outlet belt • Humidification: in the spray system • Sprinkling: with various grit • Band width: 650mm • Machine length: approx. 2500mm • Speed: adjustable • Condition: technically tested

Sidel PET filling ling products: drinks with Co², beer capacity: 12.000 bph per 1,5 ltr. It is possible to turn on individual machines of the line in a dry state. bottle formats: 500 ml 700 ml, 1.500 ml all neck bottle formats: PCO 28 - 1810 1. Blow molding machine Sidel SBO 10 year of manufacturing: 1999 2. Cooler for SBO 10 year of manufacturing: 1998 3. Preform hopper Sameto Technifil Year of manufacturing: 1999 4. Preform conveyor Sidel year of manufacturing: 1998 5. Compressor SIAD year of manufacturing: 1999 and cooling for the compressor 6. Air conveyor RAFALE year of manufacturing: 12/1998 7. Mixer 240 C, Moravek 'CFT year of manufacturing: 2000 8. Tribloc Alsim PET r.v. for 60 filling taps year of manufacturing: 2000 9. Labelling machine Krones Contiroll year of manufacturing: 2004 10. Slat conveyors year ...

Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000

At Crezta Equipment, we supply complete giblet handling systems designed for hygienic processing, efficient separation, and consistent product quality. Main Equipment Included Gizzard processing units (opening, cleaning, peeling) Heart and liver separation systems Gut reception conveyors Stainless-steel offal transfer conveyors Inspection and trimming tables Giblet washing and cooling units Offal collection bins & pumps Key Advantages High hygiene standards with full stainless-steel construction Consistent giblet recovery and reduced product loss Easy access for cleaning and maintenance Modular design that adapts to any plant layout Reduced manual labour through automated separation and cleaning units Designed for Better Yield and Better Food Safety Our giblet handling equipment is engineered to minimize contamination risks and ensure clean, reliable product separat ...

Qty. 1 Second-hand cut-to-length line – in production Mfc.: Vigano (Italy), PLC: Siemens Built: 2000 available in 9 - 2023 Status: Still in production Strip width: 580 - 2000 mm Thickness: 1.5 – 6.0 mm Max coil weight: 30 tons Max width 1250 mm up to S420MC (max thickness 5 mm) Length of sheet: 580 - 6000 mm Tolerance: +/- 1 Daily production: 80 tons

Filing Line for non-returnable PET-bottles make KRONES, Kaeser, Comag, Lachenmeier capacity 14.000 bottles/h at 0,5l bottle 12.000 bottles/h at 1,5l bottle neck finish PCO 1810 filling product carbonated water, beer and soft drinks with 15°C and 8,0 g/l CO2 year 2004 packing 3 x 2 (with and without handle) pallet 4 x ¼ Plastic pallet (600 x 400 mm) 2 x half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm) control Uni Siemens S7 300 kind of current TN-S-net, 400 V, 50 Hz This complete filling line for non-returnable PET bottles was manufactured in 2004 by Krones. The line is for production of high-performance beverages and it is in good condition. consisting of: 1. Blowmoulder-Filler-Bloc KRONES Contiform S08 Incl. preformtipper Tanner, Prefromconveyor Cooling Unit KKT Kraus KLC50N Mecafill VKP-PET 2880-80-113 Neckhandling Automatic butterfly ...

Stock number: 3778 CUTTING LINE Manufacturer: MORGAN , Type: 1330 x 0.7 - 3.2 mm Specifications: Size scissors length 1330 mm Size sheet thickness 0.7 - 3.2 mm - Roller feed 2 pc dia. 100 rools Composed of: - Straightening machine 5 pc. dia 100 Reels - Drain reel 5 ton dia. 530-610 mm tone - Scissors Morgan 1500 x 3.2 mm Accessories: Coil trolley 5 ton Length: 6500 mm, Height: , Width: 33.00 mm, Weight:

Qty. 1 Second-hand Electrostatic Multi Colour Powder Coating Production Line Mfc.: Gema Type: OptiFlex A2-14 Guns Built: 2013 OptiFlex A2 adjusts the air settings electronically by means of patented DVC System and monitors the production parameters continuously, resulting in a high quality coating Result. Work piece data – Aluminium Profiles Dimensions: 1800 x 400 x 6000 mm – H x W x L Conveyor speed: 2.0 m/min. One new Booth No. 2 (Mobile on rails) Magic Plus Booth” with cyclone recovery installed 2013, consisting of: Gema Electrostatic Powder Coating Equipment type OptiFlex A2 – 14 Guns With OptiFlex AS05 and OptiStar CG06 Gema Reciprocator System type ZA05-23 with carriage type XT10 for remote width positioning and outside cleaning Gema Control System type CM-30 Magic control including height recognition system Gema Quick Color change system Magic Plus with mu ...