We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,307 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: Heizleistung 12 kW , Stromverbrauch 14,9 kW , Füllmenge 20 l max. Temperatur 200° C Approx. Onsite Dimension. (l x w x h): 1,400 x 500 x 1,000 mm, weight approx.: 120 kg
used
Description: Fabrication number: 1649044 Operating pressure: 60 bar Speed: 6300 rpm Approx. Onsite Dimension. (l x w x h): 300 x 250 x 200 mm, weight approx.: 40 kg
new
OEM Oil Pump - Turbine Side (p.n. 48) for ABB VTR 400 Turbocharger The Pump is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).
new
OEM Oil Pump - Blower Side (p.n. 47) for ABB VTR 400 Turbocharger The Pump is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).
used
Approx. Onsite Dimension. (l x w x h): 400 x 400 x 700 mm, weight approx.: 40 kg
used
Description: Technical details: Volt 220 V, connected load 0.95 kW, additional information: ELBARON - ISI Industrieprodukte GmbH, type: EBR 2500 D EBR 2500 D, for extracting oil mist, emulsion mist (for emulsions with higher oil contents) and smoke. The ELBARON filter series was developed for use in machining with pure oil or for separating oil mist and smoke. The ionizer/collector cells, which we specially manufactured with high precision, in combination with the coordinated, very powerful high-voltage transformer and many other well thought-out details result in one of the most powerful electrostatic filter systems on the market. The ELBARON electrostatic filter system is an electrostatic filter system that has been tried and tested for years and is used 10,000 times worldwide. weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 800 x 1,300 mm
used
Description: Technical details: liter output 20550/42 degrees Qa, coolant R134a/1430 refrigerator Pressure 20 bar, total power requirement 14.5 kW, additional information: The models in the HYFRA Gamma series are designed as immersion coolers for cooling water, oil and emulsion. The plug-and-play immersion coolers can be installed and can be used with an area requirement of just 0.5 m². This makes them very suitable for integration into various machine layouts. Outputs of up to 28 kW are available in just 0.5 m2 thanks to the compact design Stand space possible. This results in significant flexibility advantages when planning the production area layout and a significant increase in productivity because there is space for more producing machines. In the compact models of our immersion coolers, the condenser is installed horizontally. Thanks to this type of construction, the immersion coo ...
used
Key data: 90 m³/min, 3 , 20
Ingersoll-Rand Oil Free Screw Air Compressor L90I A3.5 -14-16-50 pressure generators from 2014, complete (closed module) 1 available Class 0, 1,190 m3/h, 7 – 10 bar. Compressor Ingersoll-Rand L90I Manufacturer: Ingersoll-Rand Model: L90I A3.5 -14-16-50 Type: oil-free screw compr. Class 0 Serial Number: UCV1002567 Volume flow rate [m3/h]: 1,190 Output pressure [bar]: 7 – 10 Power [kW]: 90 Year of construction: 2014 Running hours [h]: – Weight [kg]: 2.210 Dimensions LxWxH [cm]: 310x160x235
used
Description: Kaeser AIRBOX CENTRE 550 with integrated air dryer and air receiver rated power: 3 kW air flow: 255 l/m working hours: 2811,2533 under load max.working pressure : 10 bars piston pump replace with brand new one in 2021! Kaeser C-Service on 06.10.2022. regulary maintained service manual: unavailable The innovative AIRBOX and AIRBOX CENTER The AIRBOX and all-in-one AIRBOX CENTER – which features an integrated compressed air receiver, refrigera tion dryer and optional filter equipment – are delivered with a control cabinet and ready for immediate operation. The use of energy-saving IE3 motors makes compressed air generation particularly efficient Oil-free compressed air This results in the following advantages for special ap plications: the compressed air quality corresponds to the quality of the intake air. No contamination is caused by the compression process. This ena ...
used
Description: Hydraulic output up to 250 l/h depending on setting Foreign oil discharge 35 l/h Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,400 mm, weight approx.: 60 kg
used
Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,250 mm, weight approx.: 200 kg
used
Approx. Onsite Dimension. (l x w x h): 5,300 x 1,300 x 3,300 mm, weight approx.: 2,500 kg
used
Recon Part number: 002 180 34 01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
used
Description: Workpiece turning circle 180 mm Workpiece length - max. 650 mm Horizontal rotating device for centrifuging process media (oil, emulsion) Workpiece clamping pneumatic between centres No control cabinet available Was integrated in a cold rolling mill Machine already dismantled weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 600 x 1,300 mm
used
Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg
used
Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg
used
Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg
used
Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg
used
Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg
used
Description: Tank capacity: 50 l Power: 2.5 HP Flow rate: 210 l/min Rotation speed: 2850 rpm Maximum. operating pressure: 8 Bar Rated voltage: 230V, 50Hz Cylinder: 47 mm Sound emission level: 91 dB Approx. Onsite Dimension. (l x w x h): 800 x 500 x 400 mm, weight approx.: 20 kg
used
Description: Supply voltage: 12V Power: 19W Flow rate: up to 15 l/min Outlet: 16mm Pump diameter: 38mm Approx. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg
used
Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 300 x 300 x 400 mm, weight approx.: 15 kg
used
Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 300 x 300 x 400 mm, weight approx.: 15 kg
used
Description: Supply voltage: 12V Power: 19W Flow rate: up to 15 l/min Outlet: 16mm Pump diameter: 38mm Approx. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg
used
Description: Hex socket: 8mm, 9mm, 10mm, 12mm, 14mm, 17mm Square Sockets: 5/16', 3/8', 7mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm external triangular cap 10mm square internal base Articulated button Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 2 kg
used
Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 300 x 300 x 400 mm, weight approx.: 15 kg
used
Description: Hex socket: 8mm, 9mm, 10mm, 12mm, 14mm, 17mm Square Sockets: 5/16', 3/8', 7mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm external triangular cap 10mm square internal base Articulated button Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 2 kg
used
Description: Supply voltage: 12V Power: 19W Flow rate: up to 15 l/min Outlet: 16mm Pump diameter: 38mm Approx. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg
used
Description: Hex socket: 8mm, 9mm, 10mm, 12mm, 14mm, 17mm Square Sockets: 5/16', 3/8', 7mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm external triangular cap 10mm square internal base Articulated button Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 2 kg
used
Description: SUBMERSIBLE SLURP PUMP, IP55, 2.6KW, 3000 1/MIN, 220-240/380-420V 50HZ, FLOW RATE 600 L/MIN AT 12.0M, DELIVERY HEIGHT, SUPPLY DEPTH 570MM, PIPE CONNECTION G 2 1/2, MAX. SOUND PRESSURE LEVEL 76 DB (A), WITH HARTING PLUG-IN CONNECTOR: 10-PIN DESINA, TAL901/570-MVX+227. Used in milling or grinding machines to pump around the cooling oil. Approx. Onsite Dimension. (l x w x h): 1,400 x 1,400 x 1,300 mm, weight approx.: 100 kg
used
Recon Part Number: 1202 9316 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Immediately available refurbished gas-oil throughput caps, we also have all used ones in stock
used
Description: Suitable for screw compressor and refrigeration dryer system, with both filters see photo Approx. Onsite Dimension. (l x w x h): 600 x 600 x 1,600 mm, weight approx.: 50 kg
used
Description: With 2 filters, one type ,F 95 P and one ,F 95 M Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,800 mm, weight approx.: 80 kg
used
Description: The three squeezing machines have an extraction capacity of 400 kg/hr (for sunflower oil) and are composed of 4 worm screw extruders with an external case made of interchangeable modules in hardened steel. Each individual extruder is completely modular and allows for the identification of a single component that may be damaged in order to replace it easily and economically. These three machines require half a day per week for cleaning and inspection of consumable parts, which are located at the front, where the pelletized product comes out, and in the thrust bearings. The machine has been perfected over time to achieve maximum extraction potential (as far as sunflower seeds are concerned) and to minimize wear on the various parts. It is possible to change the order and composition of the individual rings that make up the case for the processing of other oilseeds (in this c ...
used
Lot 592 500L steam jacketed hemispherical scrape surface vessel, bottom central discharge, half moon lid, agitator (six sets of removable propellers along shaft)
used
NNP 500l mixing vessel Stainless mixing vessel, 500l capacity, top mounted motor with agitation and scrape surface, loaded on weigh cells, central bottom discharge with side chute, 3Ph
used
NNP mixing vessel Stainless 500l mixing vessel, jacketed, top mounted motor with agitation and scrape surface, central bottom discharge, 3Ph
used
Kenplaat mixing tank Stainless 1500l mixing tank, top mounted motor, level detection, side bottom discharge
new
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...
used
General SKU279M288 LocationBarneveld MakeOostendorp apparatenbouw B.V. TypeMixing reactor of 800 liter No.6073 Year of construction2005 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume800 Ltr. Motor0.75 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactor(1x) Capacity800 Ltr. Vessel sizesdia. 900x1400mm Dished bottomcheck Dished top sidecheck Manhole/handgat dia. 150mm Top connections7x Outletdia. 50mm With jacketcheck Max. temperature150 Degr. C. With propellor stirrercheck Motor0,75 KW, 220/380 Volt (Ex) Information Mounted on legscheck Floorspace1,2x1,2 M Total height3,3 M Weight1200 Kg ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid pharmaceuticsRubberLubricants ...
used
General SKU051G200 LocationBarneveld MakeWerkhuizen Schepens N.V. Dendermonde TypeMixing drum No.70-776-397 Year of construction1998 Main Features MaterialStainless steel Motor11 KW Inlet diameter1200 mm Specified Features - Coating pan MaterialStainless steel 1.4306 (304L) Coating installationContinuous drum coater (1x) Pan diameter1200mm Cylindrical width6000mm, Adjustable inclination In-/OutletInlet 340x340mm, Outlet 400x600mm Motor11,0 KW, 380-415/660-720 Volt With spraying arm(nozzles are missing) Information Mounted on framecheck With switchgearcheck Floorspace9,0x2,6 M Total height2,1 M Weight8500 KG Extra SpecificationsMixing drum non perforatedCoating pansSchepensCoating pans > Coating pansBrand > Schepens What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...
used
Olsa Process Mixing Suite: 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels. Full hydraulic raise/lower complete with electrical panels, touchscreen PLC controls, CIP pumps, diaphragm product discharge pumps, both vessels on load cell system, exceptional condition. Manuals/drawings included. Vessel 1 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, contra rotating mixer 1.1kw, bottom entry high speed homogeniser 7.5kw. Vessel rating 2.5bar plus full vaccum at 155 Degrees C. Jacket 4.5bar 155 degrees C. Full CIP system. 150mm dia hinged chareport with sightglass, vessel light. Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet. Vessel dimensions 1.3m x 2m x 2.4m closed. Vessel 2 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, bottom entry high speed homogeniser 7.5kw. Vessel rating 2.5b ...
used
Giusti 375L cooking kettle Serial: TF1160 Stainless, capacity 375L, steam jacketed, mixing kettle, variable speed, adjustable temperature control, scrape surface, tilting to discharge, 3Ph
new
dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner ...
new
New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...
new
New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...
new
New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...
new
New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...
used
Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg