oil filling used for sale

Oil drip tray DENIOS 200 l, without contents

Filling station for oil, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump -Hand: operated -with: return to the tank -Number: 2x pumps available -Price: per piece -Dimensions: 580/590/H1005 mm -Weight: 70 kg/piece

Oil-water separation system, oil-water separator, condensate separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Number: 1 filter available -Price: per piece -Dimensions: 460/500/H950 mm -Weight: 32 kg

Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations regarding sewer discharge. -Dimensions: 750/350/H830 mm -Weight: 10 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic oil tank: with return filter, pressure regulating valve and level indicator -Filter: EPE Eppensteiner type RL601 P= 16 bar -Pressure regulating valve: Bosch 0811 101 177 -Tank capacity: approx. 420 liters -Dimensions: 1870/730/H1070 mm -Weight: 278 kg

Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, suspended matter filter -Manufacturer: WW, oil mist separator filter system type ME-FI 600 -Voltage: 230V / 0.15 kW -Filter: without filter -Quantity: 1 piece available -Dimensions: 710/390/H445 mm -Weight: 38 kg

IHI TURBO OIL FREE COMPRESSOR, WATER COOLED Model : TRA20-235kW Origin : Fully Made in Japan Operating Condition Gas : Compressed Air Capacity : 40m³/min Suction Temperature : 35ºC (Design Point) Relative Humidity : 80% Discharge Pressure : 6barG Compressor Specification No of Stage : Three Output of Driver : 235 kW Voltage : AC415V / 50Hz / 3PH Noise Level : 85dB Starter System : Inverter Starter Cooling Water : Fresh Water Inlet Temperature : 32ºC Water Requirement : 35m³/h Dimensions L x W x H (mm) : 3,700 X 2,000 X 2,000 Weight : 7,100 kg

Oil hand pump, oil cabinet, oil dispenser, oil pump, oil dispensing system, oil delivery device, oil station, oil centrifuge -Handover: in its current condition as inspected -Level indicator: missing, condition as shown in photos -Manufacturer: Tecalemit, mobile oil dispensing device with hand pump -Item No.: 1.520201.1 -Tank capacity: approx. 30 liters -Pump: hand-operated -Hose: can be shut off with tap -Dimensions: 500/440/H820 mm -Weight: 17 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer:BEKO, oil-water separation system Oil and water separation device type Öwamat KT 05 -Accessories: incl. Oekosorb replacement filter, see photos -Dimensions: Ø 680 x 1130 mm -Weight: 73 kg with pallet

Pressure gauge, flow meter, measurement and control technology, liquid flow meter, lubricating oil flow meter -Manufacturer: Turbo, flow meter for lubricating oil -Measuring range: 0 to 1.5 m³/h -Flange: Ø 115 mm / bolt circle Ø 85 x 14 mm -Connection: DN 25 -Dimensions: 160/115/H115mm -Weight: 6 kg

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Kaeser, Air Oil Separator Filter Type 6 1963 0 -Inside/outside: Ø 124/170 mm -Bolt circle: Ø 210 mm -Number: 3x air filters available -Price: per piece -Dimensions: Ø 250 x 245 mm -Weight: 2.3 kg/piece

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mann Filter, Air Oil Separator Filter Type 49 002 52 101 -Inside/outside: Ø 124/169 mm -Number: 5x air filters available -Price: per piece -Dimensions: Ø 190 x 315 mm -Weight: 2.6 kg/piece

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Ecoair, Air Oil Separator Filter Type N 2785000 / 49 302 52 171 -Inside/outside: Ø 110/170 mm -Bolt circle: Ø 210 mm -Quantity: 1x air filter available -Dimensions: Ø 245 x 420 mm -Weight: 3.4 kg.

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mahle Air Oil Separator Filter Type 852 631 -Inside/outside: Ø 120/170 mm -Quantity: 1x air filter available -Dimensions: Ø 200 x 610 mm -Weight: 4.2 kg

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 500 x 1000 mm -Weight: 50 kg

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 750/600/H950 mm -Weight: 80 kg

Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: pneumatically -Reel -Hose: 6 m - Manual valve with flow indicator -Number: 3x pumps with reel available Price: per piece -Weight: 60 kg/piece

Unused!, temperature range 20-300°C, heater 6,5A-4kW, cooling 20kW Auction-ID: A1-43459-51

2x opened barrel; a total of approximately 250 litres; including various plastic oil cans; without pallet; Auction-ID: A1-43992-216

mounted on wheeled bracket; equipped with supply and discharge hose; equipped with various filters; Auction-ID: A1-43992-244

1x plastic container with steel grid floor 1200x1200x220 mm, 2x steel container 2250x1000x250 mm Auction-ID: A1-43992-157

30-position tool changer Minimum and maximum tool diameter: 76/125 mm Maximum tool length: 280 mm Maximum tool weight: 7 kg Including tool holders and related drills/cutters. Assorted quantities and types, as shown in the photo. The total availability of individual visible elements is not guaranteed. Auction-ID: A7-45181-10

Dimensions approx. 450x260x560 mm Auction-ID: A1-45495-408

Approx. 23 pieces, including pallet Auction-ID: A1-45495-451

new METASYS META AIR 250, a high-quality, oil-free compressor from the dental/laboratory sector. Technical data: • Manufacturer: METASYS • Model: META AIR 250 • Voltage: 400 V / 50–60 Hz • Power: 2.2 kW • Max. pressure: 7 bar • Tank capacity: 50 litres • Type: oil-free • Very quiet running, ideal for laboratory, practice or workshop Auction-ID: A7-45427-4

Dimensions approx. 450x260x560 mm Auction-ID: A1-45495-409

First vacuum cleaner size: 700 x 600 × 1200 mm Dimensions according to vacuum cleaner: 500 × 500 x 1000 mm Auction-ID: A7-45181-29

Unused!, temperature range 20-300°C, heater 6,5A-4kW, cooling 20kW Auction-ID: A1-43459-50

Unused!, temperature range 20-300°C, heater 54A-78kW, cooling 116kW Auction-ID: A1-43459-42

Unused!, temperature range 20-300°C, heater 156A-108kW, cooling 116kW Auction-ID: A1-43459-40

Unused!, temperature range 20-300°C, heater 6,5A-4kW, cooling 20kW Auction-ID: A1-43459-52

Unused!, temperature range 20-300°C, heater 26A-18kW, cooling 50kW Auction-ID: A1-43459-48

Unused!, temperature range 20-300°C, heater 54A-78kW, cooling 116kW Auction-ID: A1-43459-43

Unused!, temperature range 20-300°C, heater 26A-18kW, cooling 50kW Auction-ID: A1-43459-44

Unused!, temperature range 20-300°C, heater 54A-78kW, cooling 116kW Auction-ID: A1-43459-41

Unused!, temperature range 20-300°C, heater 26A-18kW, cooling 50kW Auction-ID: A1-43459-49

Unused!, temperature range 20-300°C, heater 26A-18kW, cooling 50kW Auction-ID: A1-43459-45

Unused!, temperature range 20-300°C, heater 26A-18kW, cooling 50kW Auction-ID: A1-43459-47

Unused!, temperature range 20-300°C, heater 26A-18kW, cooling 50kW Auction-ID: A1-43459-46

Centrifuge / centrifuge for deoiling or dewatering Including control cabinet (different speeds), separation basin with 2 pumps, Automatic lid lock (safety lock) Functional

Industrial hydraulic oil chiller/temperature controller TOOL-TEMP TT-708Y Revised, works perfectly Very clean Auction-ID: A1-44895-9

Collection volume 203 l, load capacity 300 kg Auction-ID: A1-45682-55

Used olive oil processing line VITONE V3 3000 kg/hr The Used olive oil processing line VITONE V3 3000 kg/hr delivers a complete solution for olive oil extraction. Industrial olive mills and professional oil producers use this line to achieve efficiency, operational continuity, and consistent oil quality. The system processes up to 3000 kg of olives per hour, offering high performance while reducing capital investment compared to new equipment. Technical configuration of the processing line VITONE manufactures every component of the Used olive oil processing line VITONE V3 3000 kg/hr. As a result, the system offers seamless mechanical integration and compatibility between modules. Moreover, technicians benefit from simplified maintenance procedures. Operators can run the line continuously without compromising output quality. In particular, VITONE uses certified food-grade materials that r ...

Technical Specifications & Performance Data Engineered for continuous olive oil extraction and seamless downstream packaging, this second hand line pairs traditional granite milling with modern separation. It can interface with a used bottling line for edible oil in PET or glass containers, supporting efficient industrial packaging workflows. Throughput: up to 2,500 kg/h (≈2.5 t/h) of olives, continuous duty Year of manufacture: 2000 Condition: READY FOR OPERATION Primary process stages: reception and elevating conveyors, washing/deleafing, four-wheel granite stone mill, malaxation (4 stainless tanks), vibrating screen, Barracane 4015 decanter centrifuge, Alfa Laval final separator (approx. 2000 L), centralized electrical panel Key components (sample): Various Equipment – Barracane 4015 decanter (2000), elevating conveyor, stainless malaxers with gear-driven paste pumps, Alfa L ...

Used oliv oil mill 1200 kg/hTechnical Specifications & Performance DataThis complete olive oil extraction line is a robust, second hand industrial solution designed for reliable throughput and consistent quality. Built in 2004, it combines proven mechanical components with continuous-flow processing to handle olive preparation, malaxation, separation, and clarification. The line configuration is well-suited for producers seeking dependable uptime and a straightforward path to downstream industrial packaging or integration with a used bottling line for edible oil.Build year: 2004Throughput: 10–12 quintals/hour (approx. 1,000–1,200 kg/hour, product-dependent)Malaxers: 3 units x 600 liters eachPrimary separator: Decanter M3 by PieralisiPolishing stage: Pieralisi separatorPre-treatment: Leaf remover, hopper with belt conveyor, hopper with screw conveyor for olive loadingCrushing: C ...

Used AMENDUNI complete oil prodaction line 20 qlhTechnical Specifications & Performance DataThis complete continuous-cycle olive oil line is engineered for efficient, high-throughput extraction with integrated handling, crushing, malaxing, separation, and decantation. Manufactured by AMENDUNI, it provides a robust platform for second hand industrial packaging and food processing environments, supporting seamless integration with downstream bottling and industrial packaging operations for edible oils.Operating mode: Continuous-cycle olive oil extraction lineManufacturer: AMENDUNIYear: 1987Throughput: Up to 20 quintals per hour (approx. 2,000 kg/h)Included equipment: olives conveyor, leaf remover, stainless steel hopper, screw conveyors, hammer crusher, 4 stainless steel malaxers, 2 paste pumps, 2 decanter centrifuges, pomace screw conveyor, 4 stainless steel decantation tanks, separators, ...

Pieralisi Used Complete Line Jumbo 3 2000 for oil production - 3 tons per hourTechnical Specifications & Performance DataThis second hand complete oil production line is engineered for continuous olive oil extraction with industrial reliability and efficiency. Designed and manufactured by Pieralisi, the JUMBO 3 configuration delivers consistent throughput for food-grade processing and can be integrated downstream with bottling equipment for industrial packaging operations.Manufacturer: PieralisiModel: JUMBO 3Production capacity: 3 tons per hourApplication: Edible oil extraction and clarificationLine composition: Leaf remover, washer, crusher, malaxers (7 units total), decanter, separator, conveyorsYear of manufacture: 2000Configuration: Complete process line, suitable for integration with a used bottling line for final packagingAdvanced Automation & Control SystemsThe Pieralisi JUMBO 3 p ...

Used Bottling Lines for edible oil 6000 bph General Configuration of the Bottling Line The Used Bottling Lines for edible oil 6000 bph line processes edible oil in 1-liter PET bottles, operating at a nominal speed of 6000 bottles per hour. The configuration includes equipment from multiple manufacturers, integrated to ensure continuous operation and reliability in filling, labeling, packaging, and palletizing. Operators correctly shut down the entire system in December 2022. At present, the machines are dismantled and stored in suitable conditions. Consequently, this line is immediately available for relocation and reuse. Overall, the structure represents a compact yet complete solution for medium-scale production. Container Formation: KOSME Blow Molding Machines The Used Bottling Lines for edible oil 6000 bph line includes two blow molding machines from KOSME, model KSB3000, year 2001.  ...

Used continuous flow oil extraction lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous operation and dependable seasonal throughput. Built around continuous-cycle technology, it combines crushing, malaxing, separation, and filtration with pneumatic management to deliver stable, high-quality olive oil ready for downstream industrial packaging and bottling.Production capacity: about 20 ql/h (expandable by upgrading pumps)Line configuration: 2 continuous-cycle linesPrimary equipment: crusher with variable speed and gear pump group, malaxers (5 ql and 7 ql units), centrifuges, stone mill, filters with trays, gear pumps, water pumps, sorter with belts and hoppersCentrifuges: 2 units, 7–8 ql/h eachMalaxers: 5 units x 5 ql; 4 units x 7 qlFilters: 2 units with 4 traysStone mill: 1 unit, 7 qlControl medium: compressed air for a ...

Used Vitone V5 decanter for oil - 90ql MalaxeTechnical Specifications & Performance DataThis second hand decanter centrifuge is an industrial separation unit designed to support upstream processing prior to packaging and bottling operations. Built in 2006, it combines robust performance with straightforward integration to modern process lines. The machine is supplied complete with an electrical control panel and a large-capacity malaxer, enabling efficient preparation and clarification of product before transfer to storage tanks and downstream filling equipment in a used bottling line or new installation.Year of manufacture: 2006Throughput capacity: 50 q/h (approximately 5.0 t/h)Included components: Electrical control panel; malaxer rated at 90 ql (about 9,000 kg)Process type: Continuous solid–liquid separation via horizontal decanter centrifugationOperating configuration: Supplied  ...