oil filler used for sale

Oil injector similar to oil diffusion pump Manufacturer: Leybold - Heraeus Type: Whether 8000B Condition: used, expanded from a running system!

Fuel oil tank, storage tank, steel tank, diesel tank, tank system with 60,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, cleaned, overhauled and equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011 - steel blue. L = approx. 12.80 m / D = 2.50 m / weight approx. 11.5 tons. ...

Oil-glycol plant Technical data Manufacturer: KME Year of construction: 2004 ATTENTION: SOLD IS ONLY TO PROFESSIONALS. All information without guarantee

GS11 - used approx. 40 m³ / 40,000 litres steel tank, insulated container tank with heating coil, former palm oil tank, in good condition. Aboveground storage tank, lying horizontally, insulated container tank, former palm oil tank. Technical details: year of construction: approx. 2007 total tank capacity: approx. 40 m³ / 40,000 litres capacity at max. filling height: 37,000 liters (decrease due to the insulation) dimensions incl. insulation: h 2.10m, w 2.50m, l 9,50m weight: approx. 7.5 t material: S235JRG2, single-walled steel tank with 80 mm of insulation certification mark: Z-38.11-143 tested pressure inside storage space: 2.73 mH2O other: incl. forklift pockets at the tank bottom and crane eyelets on top for transport, incl. inside heating coil. The container is used, has been emptied and professionally cleaned inside. Corresponding to the age there a ...

Auction-ID: A1-44897-98

High capacity oil cooler, Schimpke prod., type DK68V / 50, 6200 kcal/per hour, oil Durchflus 36 - 51Ltr rpm installation _ compressor, fan, .uber filters extraction.

Oil-water separation system, condensate separator, oil and water separator, oil separator -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm -Weight: 31kg

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: drukomat, oil-water separator -Type: drukomat 1 -Dimensions: 430/330/H680 mm -Weight: 27kg

Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: by hand -2x: separate containers with pumps -with return flow: into the tank -Dimensions: 800/530/H1100 mm -Weight: 88 kg/piece

P135 - used approx. 46 m³ / 46,000 litres polyester tank, GRP tank, aboveground, on 2 steel bases, in good condition. technical details: capacity: approx. 46 m³ / 46,000 litres material: polyester tank / GRP tank manufacturer: Reich Tank specific gravity: 1.3 kg/L dimensions: approx. length 6.5 m x Ø 3.0 m x 3.4 m overall height other: Maximum operating temperature 95 degrees, used and in good condition, aboveground storage tank, lying horizontally, includes 2 steel bases. Lid and several ports on the top of the tank body, DN100 connection the front side, see photos. The tank will be repainted by us. The container can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the ta ...

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 450 mm -Piston diameter: 40 mm -Dimensions: 600/75/H108 mm -Weight: 4.8 kg/piece

Filter device for hydraulic oil Oil pump, Oil filter, Brand: Hydraulic equipment Vertriebsgesellschagt mbH Other details: Please see photos All information without guarantee

Hydraulic oil tank -Tank height: 200 mm -Tank capacity: 3.6 L. -Dimensions: 190/350/H290 mm -Weight: 5 kg

Filter control valve, switch-on valve, maintenance unit, water separator -Connection: 1/4 -Number: 5 pieces available -Price: per piece -Dimensions: 80/80/H190 mm -Weight: 0.7 kg

Oil filter system, oil purification system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump -Magnetic filter -for: hydraulic and other oils -electrical control -Dimensions: 820/420/H1030 mm -Weight: 70 kg

Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Dimensions: 590/590/H1170 mm -Weight: 58 kg

Oil filter, filter cartridge -Ecoair BN: 16013 -Identical: with Atlas-Copco 1202835300 -Dimensions: Ø 140 x 300 mm -Number: 42 pieces available -Price: per piece -Weight: 2 kg

Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispensing system -Contents: approx. 60 l -Air pump -Hose with tap -Transport dimensions: 500/500/H950 mm -Weight: 35 kg

Waste oil collection device, mobile oil collection container -Volume: 90 l -Dimensions: 650/450/H1200 mm -Weight: 35 kg

TO WHOM IT MAY CONCERN ; WE VE GEA WESTFALIA OIL SEPARATORS OSD 6 WITH BELOW EQUIPMENTS AT OUR STOCK PLS FIND DETAILS ON BELOW --TYPE OSD6 - 91 - 067 / 3 & OSD -91-067 / 6 YOB 2006 SERIAL NO 9037-463 & 9038 - 150 BOWL SPEED 12000 VOLT 380VOLT FREQUIENCY 50Hz --ELWA HEATER TYPE 5609-V kW 12 BAR 6 -- TRANSFER FEED PUMPS --CONTROL PANELS EX STOCK READY TO DELIVER. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Domnick Hunter, oil-water separator -Type: SE2015 -Dimensions: 800/480/H1085 mm -Weight: 82kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic reservoir: from Butler 1200 pallet jack -Contents: approx. 11 liters -Additional parts: see photos -Dimensions: Ø 210 x 580 mm -Weight: 11 kg

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

3,000 litres of above-ground, galvanised waste oil collection container and for other liquids of hazard class A3 (e.g. glycol/antifreeze, etc.) Pick-up or delivery possible. Complete system, but without overfill protection

Waste oil collection tank 950 litres approved for liquids of hazard class AI-III With test certificates State: Technically deficialy Optical: According to age

Various above-ground, double-walled tanks in sizes 5,000 / 7,000 / 10,000 / 20,000 litres Diameter 1,6000 and 2,000 mm

Standard Radiator, Car Radiator, Oil Cooler, Heat Exchanger -Manufacturer: Longer Reich, light metal oil cooler cooler -Type: unfortunately no type designation -Motor: Siemens 0.37 kW -Pressure: max. 16 bar -Temperature: max. 120 °C -Dimensions: 560/330/H540 mm -Weight: 28 kg

Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator -Ventilation grille: louvered grille, Filter for oil mist separator -Material: aluminum -Total dimensions: 440/330/H345 mm -Weight: 13.8kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic oil tank: with attachments -Tank capacity: approx. 60 liters -Individual components: see photos -Dimensions: 730/670/H620 mm -Weight: 74 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg

Oiler, line oiler, line oiler, eco line oiler -Oiler: Line oiler for demolition hammers or other pneumatic tools -Number: 3x oilers available -Price per piece -Dimensions: 450/110/H100 mm -Weight: 3.1 kg/piece

Recon oil cooler ready to ship

Recon and used immediately delivery

Ready to be delivered immediately

Recon in stock and also available in used

Fuel oil tank diesel tank steel tank tank system with 20,000 litres capacity, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and cleaned professionally and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is re-primed and painted on the outside. L = approx. 6.90 m / D = 2.00 m / weight approx. 4.2 to. / ex works, freely charged. General: The price for the gas station is valid from the Söhrewald plant near Kassel, ...

Oil-water separation system / separator, for compressors KT06 000 01 Replacement filter: XV KT06 AF2

Oiler, line oiler, line oiler, eco line oiler -Manufacturer: ASL INC, Line oiler Line oiler for demolition hammers or other pneumatic tools -Dimensions: 350/190/H150mm -Number: 1x oiler available -Weight: 4.2 kg

standard cooler, car cooler, oil cooler, heat exchanger -Manufacturer: AKG, light metal oil/air cooler from screw compressor Boge VLED 30R-11A -Type: 0720.067.000 -Pressure: max. 15 bar -Dimensions: 650/360/H550 mm -Weight: 40 kg

oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator, oil/water separator -Manufacturer: BEKO, oil-water separation system, oil and water separation device -Type: Öwamat 2 -Dimensions: 450/370/H760 mm -Weight: 12 kg

Standard cooler, car cooler, oil cooler, heat exchanger, compressor cooler, hydraulic oil cooler -Manufacturer: AKG, light metal oil/air cooler with filter -Type: 5.1074.4 1109.069.0000 -Pressure: max. 15 bar -Dimensions: 1090/420/H715 mm -Weight: 61 kg

Oil seal, shaft seal, radial shaft seal, sealing ring -Manufacturer: Freudenberg, Simmerring Baum / DIN A unused original packaging -Type: BAU7X2 180x210x15 -Art.No.: 40412511 / 1045 3053 72NBR902 BAU7 -Quantity: 4x shaft seals included -Packaging dimensions: 300/300/H30 mm -Weight: 0.3 kg

hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: Baumann, hydraulic tank from electric forklift EVS 25/14 -Contents: Ltr. -Dimensions: 380/125/130 mm -Weight: 5 kg

- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...

release agent spray unit Electr. connection: 400 V 3-ph, 16 A Compressed-air connection:6 bar, oil-free Working pressure:0,1-0,5 bar renovated

Recon 944768/20-2123 Draw B20-10-164 10bar shell/5bar tube Test 15bar-7.5bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Oil-water separation system, condensate separator, oil and water separator, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer:BEKO, air compressor oil-water separator -Type: 30/0.8Mpa -Dimensions: Ø 360 x 1220 mm -Weight: 24 kg

Recon 994730 Built in 1994 1941/2200 l/min 400/450 L/min 10bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!