oil extraction used for sale

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg

1 pc. Dassler high-pressure centrifugal fan is for sale single inlet with sheet steel housing with the following performance parameters: condition: new, unused type: DCAS-852-2T-10 suction DN: 280 power: 7.5 kW air volume: approx. 4300 m3 / h speed: 2800 rpm air temperature conveyed: -20 to + 120 ° C motor: insulation class F / protection class IP55

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

Ceiling filter 160 B 10x10/20/101 - motorized shaking, 0.18 kW - Filter area 100.5 m² (BGIA Cat. G) - Filter 2000 x 160 mm, 100 pcs. - Extinguishing device - Weight 520 kg - Dimensions. 1,950 x 1,970 x 2,450 mm Chip keeper SPB2020 - Volume approx. 2.7 m³ - Dimensions 2 x 2 x 990 mm - Discharge screw - Agitator - Gear motor 1.5 kW Centrifugal fan S300 F/L2 11.0 kW - Nozzle-Ø 300 mm - Vol.Strom 5.300 m³/h, 4700 Pa - Protection class IP54, pos. GR 270 Fan 7,5 KW switchboard - Star-triangle circuit 11 kW - controls both fans and 1 x motor. Shaking All information is subject to the actual equipment

RLA 210 Clean air dedusters Metal fan wheel Inspection opening for cleaning the bypass filter manual cleaning Extraction of wood chips Not suitable for grinding dust mobile very quiet High extraction performance with small footprint Suction nozzle 200mm Nominal volume flow 2262 m³/h Volume flow max. 3700 m³/h Negative pressure at Vnenn: 2482 Pa Filter area 22m² Dust class M Residual suction content H3 Chip drum volume: 2x165l LxWXH 1755 x 830 x 1800mm Motor 3kW 400V 50Hz Weight 259kg G&STÜ-5132100

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: approx. 3 kW -Inlet connection: Ø 230 mm -Output connection: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg

SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping

Funnel, extraction hood, filling funnel, drip tray -Extraction hood: can also be used as a filling funnel for e.g. conveyor systems -Design: sturdy steel frame, stainless steel funnel sheet -Opening: Ø 200 mm -Dimensions: see photos -Transport dimensions: 2020/910/H300 mm -Weight: 96 kg

A compact extraction system for light applications of the Laser marking, coding and engraving. AD-Access combines cost-effective operating costs with performance, which is adapted to smaller laser applications. A three-stage Filter status display and three-stage filtering are standard Included: DeepPleat prefilter, HEPA range and chemical range. AD Access is an ideal solution for beginners to secure Working conditions for the operator and product quality Maintain.

BOFA's Advantage 350 suction and filter system effectively removes potential harmful vapours and particulate matter produced during the laser marking process arise. By maintaining a dust-free operating range, the System to protect valuable devices, a labeling of continuously higher To achieve quality, reduce scrap rates and reduce pollutants. The low-noise and compact Advantage 350 system is ideal for use light laser marking applications in schools, among others, Sign workshops and small industry.

with pre-filter and activated carbon filter for fine dusts and gases produced e.B. during laser processing or soldering work Dimensions HxWxD 743x360x360 mm Housing - dark grey powder-coated Airflow - 300 m³/h elekt. Data 230V, 50Hz , 12.5A full load current / 3.3 kW Noise level less than 60 dBA Weight 45 kg Warranty 1 year ( filter excluded ) VAT is shown, EXW Options - Hose in desired length - Connection sleeves - various suction nozzles

Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg

Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Suction fan Slow runners D= 350mm Air capacity 6250m³/h

High-performance flue gas fan very good condition closed wing for high pressure 15kW V-belt transmissions

Suction fan S 250 Motor power 5.5 KW 400V Air capacity 6700m³/h

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Loher 7.5 kW 1445 rpm -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 895/895/H865mm -Weight: 171 kg/pc.

3.6kW 3000m³/h 4200 PA as good as new

Motor power 18,5kW Air capacity approx. 12,500m³/h Pressing 3500PA Good condition

SAA 2001 Aspirator Suction nozzle on the device 125mm Suction nozzle on the distributor 100mm Height 2000mm Weight 47kg Motor 1.5kw 230V 50Hz Nominal volume flow 2553 m³/h G&STÜ-5922201

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 600 x 240 mm -Volume flow: m³/h -Dimensions:790/700/H790mm -Weight: 97 kg

with 12,000 m³/h air volume. Standard emptying in 3 containers of 200 litres each Reliable, quiet and easy to use. The FI series is suitable for the extraction of different staeube and spaene. Due to its efficient compact design, it is designed for use indoors and outdoors of workshops with minimal space requirements. The housing made of painted sheet steel, FILTER D 145 X H 1200 and the programmable, automatic compressed air cleaning system ensure an equal handling of the spades and bars. These are fed into handy, mobile metal housings with a viewing window for the fuel level indicator. Equipped with calming chamber for coarse particle separation at the entrance into the filter unit. The deduster is designed as a vacuum system for high suction performance and maximum fire and explosion protection with integrated Loesch water ring. The highly efficient, clean air-installed, sound-c ...

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Deprivation via briquetting press with a nominal throughput of 100 kg/h Material-dependent

with 6,000 m³/h air volume. Standard emptying in 3 containers. Reliable, quiet and easy to use. CLEAN AIR BLOWER 7.5 KW Filter area 30 m2 Footprint 350 x 110 x h 244 cm

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.2 m -water cooled -Transport dimensions: 600/500/H120 mm -Weight: 4.6 kg

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.35 m -water cooled -Transport dimensions: 640/540/H120 mm -Weight: 4.8 kg

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Standard emptying in 3 containers of 200 litres each Installation dimensions 350 x 110 x h 245 cm Reliable, quiet and easy to use.

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.25 m -water cooled -Transport dimensions: 600/500/H130 mm -Weight: 4.8 kg

Flexible extraction arm for welding smoke filter, welding smoke extraction -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg

Delta New Poluclean P30 Dust Extraction System Delta New Poluclean P30 Dust extraction system 400 V 5.5 kW 3500 m³/h 95 liters Weight: 361 kg Metrics: HxWxD = 300 x 100 x 97 cm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. Further extraction systems in other sizes - new and used - can be found in our shop! International shipping costs on request!

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg

Oil mist separator, extraction system, oil mist extraction, suction Brand ANAG Dimensions: wxlxh 55x68x50cm 230V, 50 Hz Quantity: 2 The price is net and is valid for 1 piece.

Ref.-No. 00736 Name of the system extraction system + classifier Manufacturer sybrandy Model PF 4 L Spez Year of construction 07 - 2014 Kw 3KW Capacity 3.400m3/h Cartridge SYB325-1200 Operating hours 22 h

SAA 3001/3003 Suction sturdy construction made of solid sheet steel lower static charge compared to plastic constructions Easy to drive thanks to swivel castors Air capacity 3910m³/h Diameter on the device: 150mm Diameter at distributor: 3x 100mm 50Hz 2200W Weight 59kg G&STÜ-5922301 230 volts G&STÜ-5922303 400 volts

ASA 4303 Aspirator Nominal volume flow: 4300m³/h Filter area 2x 2.4 m² Chip collection volume 2x 215l Suction nozzle outlet: 2x 100mm, 2x 120mm Input power 3,8kW Motor 400V 50Hz LxWxH 1700 x 600 x 2400mm Weight 69kg G&STÜ-5128433

Extraction dedusting Walther NOVA 2000 with 2 extraction arms mobile on wheels 2 pieces available Very good operational condition!

Extraction Dedusting Nedermann Type 663 with 2 extraction arms Very good condition, straight from production!

Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

ALKO ECO-JET 35/3N Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A) Fire protection: sprinkler installation with powder fire extinguisher

Paint mist extraction mobile with 3 meters flexible slauch

radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Rupes HE900 Turbine High Vacuum Suction Note: Rupes Type: HE900 Year of construction: 2009 Net worth: 7,5 PK turbine - direkt aangedreven Drive: 5,5KW / 7,5PK electric motor Dust-air separation: cycloon Suction line: ø 80mm Capacity: 6 to 8 werkplekken Air volume: 530 m3/hour Vacuum: 28.4 kPa Cleaning: Automatic filter reiniging met perslucht Perslucht: 6 bar Noise: 71 dB(A) Dimensions: Filter box: 1.000.551.50 meters

Auction-ID: A1-41275-85

Holtrop Jansma Suction Manufacturer: Holtrop Jansma Type: MSK300 Capacity: 6,000 m3/hr Year of construction: 2001 and 1999 Fan: ETD 300, 5.5 KW/1,500 rpm Explosion Pressure release: doors serve as pressure release in case of explosion Pressure measurement: Pressure gauge Cleaning: 0,09 KW/1500 KW Ruttelmotor Dimensions: 3.3503.0001.100 mm Scope of delivery: Filter system with built-in fan, control cabinet

Extraction of wood in working condition Auction-ID: A3-43506-9042

Auction-ID: A3-43506-9041

Consists of: MCP SmartFilter, multifunctional filter system, compressed air consumption 60 liters per cleaning pulse at 6.0 bar compressed air, installation for indoor, outdoor, material 2 mm galvanized sheet steel, filter cleaning method pulse jet, application smoke, dust, working pressure (kPa): maximum vacuum pressure: 6 kPa., maximum overpressure: 0 Pa. 1.5 kPa for silotop solution) dust bin capacity (l) 50 liter container, filter surface 211.2m², capacity (max. airflow 14000m³/hour, multifunctional filter system for both indoor and outdoor installation, MCP filter system is widely applicable, typical industries are metalworking industry, food industry, pharmaceutical industry, chemical industry, concrete and cement industry, plastics processing industry, woodworking industry and other dust-producing industries, 16 pieces of filter elements, SC141 – antistatic polyester with PTFE ...

ALKO ECO-JET 35/3N clean air extraction Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A)

Holtrop Jansma clean air extraction with swivel lock, flame suppression device & fabric protection damper Brand: Holtrop Jansma clean air extraction Type: MSO 350/300s Year of construction: 2015 M-Nr.: Woo560825S , 5960MS Clean air extraction: MSO 350/300 with star wheel swivel lock Intake supports: ø300-350 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 740 kg Capacity: 7,900 m3 /hour Pressure: 1,965 Pa Power supply: 7.5 kW, 380V, 9 Amp Filter surface: 40 m2 Filter tubes: 45 pcs. Length filter tubes: 1,450 mm Diameter filter tubes: 200 mm Cleaning: included Noise: 77 dB(A) Fire protection: sprinkler installation with fire brigade connection Flame protection flap: 70°C melt cartridge Condition: Fully functional tested Optional: Automatic fire extinguishing: € 1.750 Return air - with summer-winter slider: € 350

Auction-ID: A1-41991-19