We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,139 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
SAA 3001/3003 Suction sturdy construction made of solid sheet steel lower static charge compared to plastic constructions Easy to drive thanks to swivel castors Air capacity 3910m³/h Diameter on the device: 150mm Diameter at distributor: 3x 100mm 50Hz 2200W Weight 59kg G&STÜ-5922301 230 volts G&STÜ-5922303 400 volts
new
ASA 4303 Aspirator Nominal volume flow: 4300m³/h Filter area 2x 2.4 m² Chip collection volume 2x 215l Suction nozzle outlet: 2x 100mm, 2x 120mm Input power 3,8kW Motor 400V 50Hz LxWxH 1700 x 600 x 2400mm Weight 69kg G&STÜ-5128433
used
Ref.-No. 00736 Name of the system extraction system + classifier Manufacturer sybrandy Model PF 4 L Spez Year of construction 07 - 2014 Kw 3KW Capacity 3.400m3/h Cartridge SYB325-1200 Operating hours 22 h
used
Schuko bagging level filter type SPA 57 sqm filter area Motorized filter cleaning All-weather fairing
used
MOGENTALE aspirator filter model LA: - faired and galvanized type - with 3 collection bags - with internal filter bags - with engine kW 5,5 (hp 7,5) - to CE standards
used
Stroke length of the ram min. 120 mm .max. 320 mm Table diameter 630 mm Machine dimensions 2.45 m / 1.81 m / 2.89 m Machine weight 5,2 t
used
Extraction dedusting Walther NOVA 2000 with 2 extraction arms mobile on wheels 2 pieces available Very good operational condition!
used
Extraction Dedusting Nedermann Type 663 with 2 extraction arms Very good condition, straight from production!
used
Mogentale Luigic 37KW extraction system Power 37kw Number of bags: 96 Bag diameter fi200 Dimensions 550x245x580cmH Installation dismantled and prepared for transport
used
Filter ceiling Walther Year of construction: 2005 consisting of 2 parts each L 2000 mm x W 1950 mm x H 400 mm with 1 fan NZ 400 Fabr.-No. 421242.3 Year of construction. 20055 Volume flow 1100 – 7150 m³/h 230/400 V, 5.4/3.1 A, 50 Hz, 1.35 kW
used
ALKO ECO-JET 35/3N Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A) Fire protection: sprinkler installation with powder fire extinguisher
new
Rupes HE900 Turbine High Vacuum Suction Note: Rupes Type: HE900 Year of construction: 2009 Net worth: 7,5 PK turbine - direkt aangedreven Drive: 5,5KW / 7,5PK electric motor Dust-air separation: cycloon Suction line: ø 80mm Capacity: 6 to 8 werkplekken Air volume: 530 m3/hour Vacuum: 28.4 kPa Cleaning: Automatic filter reiniging met perslucht Perslucht: 6 bar Noise: 71 dB(A) Dimensions: Filter box: 1.000.551.50 meters
used
Holtrop Jansma Suction Manufacturer: Holtrop Jansma Type: MSK300 Capacity: 6,000 m3/hr Year of construction: 2001 and 1999 Fan: ETD 300, 5.5 KW/1,500 rpm Explosion Pressure release: doors serve as pressure release in case of explosion Pressure measurement: Pressure gauge Cleaning: 0,09 KW/1500 KW Ruttelmotor Dimensions: 3.3503.0001.100 mm Scope of delivery: Filter system with built-in fan, control cabinet
used
Paint mist extraction mobile with 3 meters flexible slauch
used
ALKO ECO-JET 35/3N clean air extraction Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A)
used
Holtrop Jansma clean air extraction with swivel lock, flame suppression device & fabric protection damper Brand: Holtrop Jansma clean air extraction Type: MSO 350/300s Year of construction: 2015 M-Nr.: Woo560825S , 5960MS Clean air extraction: MSO 350/300 with star wheel swivel lock Intake supports: ø300-350 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 740 kg Capacity: 7,900 m3 /hour Pressure: 1,965 Pa Power supply: 7.5 kW, 380V, 9 Amp Filter surface: 40 m2 Filter tubes: 45 pcs. Length filter tubes: 1,450 mm Diameter filter tubes: 200 mm Cleaning: included Noise: 77 dB(A) Fire protection: sprinkler installation with fire brigade connection Flame protection flap: 70°C melt cartridge Condition: Fully functional tested Optional: Automatic fire extinguishing: € 1.750 Return air - with summer-winter slider: € 350
used
- Producer Schuko - Type FATi-SR 200/30 - Width ~ 3000 mm - Height ~ 2.100 mm - Height with ventilator 2.690 mm - Depth ~ 900 mm - Trockenabsaugung - With filter mat - With paper prefilter - With exhauster - Ventilation system performance, exhaust fan 8.900 m³/h - Motor power 2,6 kW - Exhaust pipe 350 mm - Without switch - Ausführung/Schutzart EExe ii, T3 - In zinc plated steel - Voltage / HZ 400/50 - Location on stock
new
Device type extraction system Make TEKA Type filtoo IFA-tested incl. BGIA Certificate Supply voltage 1 x 230 volts separation efficiency > 99 % for steel and stainless steel, high-alloy steels, W3 approval fan volume flow 2,500 m³/h Motor power 1.1 kW Version mobile workshop device with extraction arm, 3 meters long in hose design Dimensions L x W x H 580 x 580 x 900 mm Noise level approx. 68 dB(A) Weight 80 kg Age 12 months Condition like new Warranty 24 months from date of delivery Total price 1.325,00 € + VAT from stock Munich incl. Spark protection STAVO ______________________________________________________________________ ______________ Coarse filter, 1 piece 10,70 € + VAT 10 pieces 79,00 € + VAT Pre-filter 1 piece 80,00 € + VAT Activated carbon filter 1 piece 71,00 € + VAT Main filter 1 piece 2 ...
used
specifications: - Air output: 6,000 m³/h - Pressing PA max: 500 Pa - Diameter pressure connection: 350 mm - Filter area: approx. 3.25 m² - Working surface (W x H): 2,080 x 1,930 mm - Area baffle: 1,800 x 1,800 mm - Dimensions of adjustable baffle plates (li + re): each 1,800 x 440 mm Engine data: - Power: 1.8 kW - Voltage: 380 V (star-delta) - Current: 3.8 A - Frequency: 50 Hz - Speed: 1,415 rpm - Transport dimensions (H x W x D): 2,500 x 2,000 x 800 mm (with pallet and mounted baffle plate and nozzles) - Weight: approx. 300 kg - Number of packaging units: 1 piece (on disposable pallet) The extraction wall was completely refurbished in our house and the fan was checked for its correct function. The extraction wall was completely cleaned and provided with new filter mats. Hint: Pipe components required for on-site operation can be requested from us. (Cha ...
used
- Cartridge filter B-2 - Air outlet NW 315 - Side panel, small - MB-BPF - Prefilter for MDS - Filter cartridge MB - CART - D - Precoatier - Compressed air maintenance unit MB - CAR - Centrifugal fan TEV-585 - Accessory kit for TEV-5 - Adapter plate direct mounting fan and pre-assembly - Control, differential pressure 24 - Manifold - 4 butterfly valves NW 80 Safe - 2 butterfly valves NW 125 Safe
used
Shot Blast Unit (Mould Cleaner for metal parts / car parts) Grit blast 3phase 4ft trolley Lift platform Internal dims: 1.4 long x 1.3m deep x 1.7m high With DCE Dust Extraction Model UMA 152 G5 415 volts 3phase 50 cycles
new
volume capacity: 1600 m3/h feed volume: 99,9 % length: 3.000 Absaugschlauch mm motor: 230 Volt motor: 1,1 KW weight: 80,0 kg range L-W-H: 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class W3 (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surchar ...
used
The newly developed sensor of the TEKA AirTracker series detects particles from 100 nanometers and impresses in the evaluation from 0 to 15 mg/m³, documented and with a test certificate. High-tech sensors guarantee a reliable measured value and safety. As soon as the configured threshold value is reached, the sensor indicates the current status of the particulate matter concentration by means of two large-dimensioned LED strips with traffic light function that are visible from afar.
used
External extraction 0.37 KW 380 V 16 A 3 ports Length 40 cm Width 50 cm Height 84 cm
used
- Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %
used
Extraction system / briquetting press Extraction system 11 KW Briquetting press 7 KW
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 4DF 16 EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture : 1997 Voltage: 3x 400V Power : 15kW Frequency : 50Hz Capacity : Unknown Dimensions can be measured if necessary.
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of construction: 1995 Voltage : 660 V Power : 4 kW Frequency : 50Hz Capacity : Unknown
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: Unknown Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture: Unknown Voltage : Unknown Power : 18,5kW Frequency : 50Hz Capacity : 3.33 m³/s approx. 20.000m³/h The plants are all dismantled and stored on pallets
used
ATTENTION : The system is currently in operation and can only be purchased AT the END of the year. This is only advertised now in order to find possible interested parties to date. for sale is the central extraction system of a medium-sized company. Extraction volume : 8,33m³/s > approx., 50,000m³/h Power : 37 kW In addition, there are: A fan that sucks in the air Type: DFDG SEE 225S4 Power : 37kW rpm : 1483 Power : 400/690 V Amperage : 65 / 37.5 A Frequency : 50 Hz Ingress protection : IP 55
used
Made in Germany Electrostatic Suction capacity: max 1800 m³/h, Fan power free suction 2400 m³/h, Engine power: 0.75 kW, (Siemens), Dimensions: L 1,765 x W 670 x H 700 mm Weight: 130 kg, Operating voltage: 400 VAC, 50 Hz, Power consumption, 1.85 Va
used
Welding fume extraction LINCOLN NORWELD SP-3M Volumetric flow: 300 m3/h motor: 2.2 kW 380 V Dimensions: 1200 x 630 x 870 mm used, tested !
used
Absaugung PAGUS Motor 0,37 kW 220 V Fahrbar. used, tested ! Dimensions: 900 x 500 x 2400 mm
used
Welding fume extraction KEMPER 91710110 built: 1996 Operating hours: 12880 h Volumetric flow: 240 m3/h 1,1 kW 230 V Dimensions: 620 x 350 x 640 mm used, tested !
used
used
Chip extraction, industrial vacuum cleaner NILFISK GB 635 50 STB -U- with stainless steel container for chip extraction 380 V without hoses used, checked ! Dimensions: 1100 x 700 x 1000 mm
used
Extraction and filter system e.g. for aluminum sanding dust M. SZILLUS ST180 1800 m3/h motor: 1.5 kW 220 / 380 V IP54 new filter bag for 140,- € ! used, checked ! Dimensions: 610 x 630 x 2400 mm
used
Extraction and filter system SEKO JET 1-4.2-U2 with side channel pump 5.5 kW 380 V Was used in cigarette production used, tested ! Properly cleaned. Filter dimensions: 2000 x 750 x 2800 mm 4 pallets accessories
used
Dust extraction system, extraction, dust extraction MÜNSTER 77 A 88 Fan wheel: Ø 460 mm 2x collection container: inner diameter Ø 235 mm x 325 mm diameter ( suction ): Ø 82 mm diameter ( holder filter bag ): Ø 260 mm motor: 1,,1 kW 2745 rpm 500 V 3AC 50 Hz without filter bag used, tested ! Dimensions: 820 x 500 x 1000 mm
used
Welding fume extraction LINCOLN NORWELD DF-500 Volumetric flow: 500 m3/h System pressure: 1000 mm/Wg ( millimeter water column ) - approx. 0,0,098 bar Fan speed: 9200 rpm operating voltage: 380 V 3AC Power consumption: 5.5 kW Connection diameter ( inside / outside ): 2x Ø 27 / 32 mm, 1x Ø 70 / 75 mm Engine: ATB 132S 5,5 kW 380 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1800 x 1200 x 970 mm
used
Absauganlagen VENTILATORENFABRIK OELDE Size: 10 Air flow: max. 9 m3/min ( 540 m3/h ) / Suction hose: outer diameter: Ø 65 mm, length: 1300 mm with suction head: 65 x 75 mm / Ø 60 mm ( inside ) motor: SIEMENS - SCHUCKERT Type: OR19-2 0,55 kW 2770 rpm 220 / 380 V 3AC 50 Hz used, tested ! Dimensions: 750 x 620 x 980 mm
used
Extraction and filter system R+K GERÄTE- UND ANLAGENBAU HRD 60/3 Air volume: 480 m3/h Power: 3,3,1 kW Total pressure difference: 9.5 kPa ( 9500 Pa, 0.095 bar ) Connections: 2x DN50 ( input ) / 1x DN150 ( output ) Dimensions ( without connections and controls ): Width: 950 mm, Depth: 700 mm, Height: 2100 mm used, checked, cleaned ! Dimensions ( space requirement ): 1200 x 750 x 2100 mm
used
Spare parts set, control board and pressure gauge KÖTTREMANN Control board: 712325 00871 H4 ( 71232500871H4 ) Pressure gauge: HUBA CONTROL 604.90 0020 20 - 300 Pa (0.0002 - 0.003 bar) spare part for KÖTTERMANN laboratory extraction, among others! used, checked ! Dimensions(Control Board): 200 x 140 x 50 mm Dimensions(pressure gauge): 100 x 90 x 60 mm
used
Welding table with fume extraction ARMATURENWERK ZITTAU G-61/1 800 x 500 mm with fan Q 1600 m3/h 0,45 kW 220 / 380 V upper or/ and lower suction adjustable used, tested ! Dimensions: 870 x 900 x 1100 mm
used
Extraction system mobile With floor nozzle Make Pieper Type KP 140 Machine No. 79273 Mobile extraction system including floor nozzle Chip bag diameter 600 mm Suction connection diameter 140 mm Motor power 1.1 kW Plastic impeller Wheeled on wheels Operating height 2500 mm Transport Dimensions 1300 mm x 800 mm H 1600 mm Weight 79 kg plus pallet
used
Airflow: 2200m³/h 1.1KW Weight 125kg Year of construction: 2009
used
Key data: 1 m²
Type ASA 2403 Airflow 36 cbm/min. Connection 400 V 50 Hz Motor 1.1 kW Speed 2,850 rpm Suction nozzle 1 x 120 mm, 1 x 100 mm Dimensions: 90 x 48 x 210 cm • For milling, planing and sawdust (not suitable for dust) • 180° rotatable suction unit allows suction to be guided from below or above • Sturdy metal fan wheel • Chassis as standard for better stability and easy manoeuvring • Quick-release fasteners for filter and chip bag • Fine filter bag double woven • Chip collection volume 110 l • Filter area 1.92 m²
used
Machine No. 180202
used
Key data: 7 m²
Room extraction dust with extension unit and Octopus 20 workbench Further data on request or see photos