oil boiler used for sale

Used complete steam boiler room from Viessmann. It consists of two steam boilers from Viessmann Vitomax 200-HS type M75A231. Year of manufacture 2015. CE The capacity of each boiler is 5.53 Tons of steam/h. Operating pressure 13 bar. CE

Cooking kettle Kerres FKK 250L, Natural gas heated, power 12kW, el. Connection 230V, Dimensions of kettle inside approx. 69x80x46cm, Total dimensions LxWxH approx. 95x125x118cm, weight approx. 344kg, older device, good used condition, functional, lid spring defective

Industrial steam boiler LOOS U-HD-1600 in excellent condition for sale. With full documentation with Weishaupt G7/1-D gas burner Manufacturer: LOOS Gunzenhausen Type: U-HD 1600 Year of manufacture: 1993 Full inspection: 2017 Boiler capacity max.: 1600 kg/h Operating pressure: 10 bar Fire output: 1186 kW Gas burner: Weishaupt G7/1-D 300-1750kw Water capacity: 1740 liters Total heating surface: 31 m² Test pressure: 18 bar Increased test pressure: 18 bar Year of manufacture: 1993 Full documentation! length: 4 meters (including gas burner) Width: 2.2 meters Ijbmrcjym Tugs Ipnstf Height: 2.3 meters Weight: 4200kg ca

F20 BOILER : ORGANIC HEAT TRANSFER MATERIAL HEATER ORIGIN : CHINA RATE CALORIFIC POWER : 3500KW MAWP : 1.0MPa MAX. WORKING TEMP. : 320°C ALL UP WEIGHT : 19.5t HYDARULIC TEST PRESSURE : 1.5MPa

Kneading dish made of stainless steel without carriage for double conical kneader DK 250, Fabr. W&P

Stainless Steel Dough Bowl with Trolley for Diosna Spiral Mixer Type SP 160 AF

F24 BOILER : ORGANIC HEAT TRANSFER MATERIAL HEATER ORIGIN : CHINA RATE CALORIFIC POWER : 3500KW MAWP : 1.0MPa MAX. WORKING TEMP. : 320°C ALL UP WEIGHT : 19.5t HYDARULIC TEST PRESSURE : 1.5MPa

Fully functional. Free loading, forwarding possible, please call if you have any questions.

Boiler Polzenith 1.6 MW, built in 2007 Very well preserved combustion plant make Polzenith 1.6 MW heating capacity. Complete system included - Fuel stock. Steel construction with moving floor - Scraper conveyors - Beth electrostatic precipitator with electric cabinet - Chimney height approx. 12m - All flue gas lines - Complete with switchgear and hydraulic system System professionally dismantled immediately ready for loading.

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

A professionally dismantled and preserved steam boiler system with a Loos steam boiler and Weishaupt burner is available. 1) Loos UL steam boiler, year of construction: 1991, max. steam output: 6000kg/h, max. operating overpressure: 16bar. 2) Dual fuel burner Weishaupt Monarch RGL 60/2-A, year of construction: 1991, version: ZM, output range: 800kW-6600kW, gas type: N, gas category: I, gas setting pressure range: 30mbar-170mbar, oil throughput range: 120kg/h-556kg/h. Documentation available. An on-site inspection is possible.

Two identical Loos steam boiler systems with Weishaupt burners are available. 1) 2x Loos International U-HD 1250 steam boilers, year of manufacture: 2003, max. operating pressure: 10bar, steam output: 1100kg/h, total volume: 1365l. 2) 2x Weishaupt G7/1-D ZD-LN gas burners, year of manufacture: 2003, category: I2ELL, gas type: N, output range: 250kW-1550kW, min./max. connection pressure: 15mbar/500mbar. Both systems including condensate collector and accessories. An on-site inspection is possible. Expected to be available starting 2027.

A complete steam boiler system with a feedwater module and various spare parts is available. 1) Loos steam boiler, year of manufacture: 1974, steam output: 4000kg/h, max. operating pressure: 16bar, max. operating overpressure: 20bar, max. steam temperature: 230°C, heating capacity: 130kW, combustion chamber volume: 63l. 2) Loos FT.C 3 feedwater module/deaerator, year of manufacture: 2009, max. pressure: 0.5bar, test pressure: 2bar, max. temperature: 110°C, volume: 3000l. 3) Weishaupt GL9/1-D dual-fuel burner, year of manufacture: 1989, version: TMD, heating capacity range: 830kW-3500kW, gas type: N, gas category: III, gas setting pressure range: 10mbar-140mbar, oil throughput range: 70kg/h-295kg/h, oil type: EL according to DIN 51603. The system was operated with osmosis water and ran 90% on gas. Documentation available. An on-site inspection is possible.

Equipment: Heatable/coolable, Insulation, Overpressure,Manufacturer: Smeja,Condition: used,Volume: 554,Max. overpressure: 2.5,Max. permissible Operating temperature : 138,Top shelf: screwed cover,Design: upright,Stand shape: feet,Number of feet: 3,Heating/cooling (filter bar): available,Temperature control inside: solid pipe coil,Insulation: available,Insulating jacket: hermetically welded,Material insulation jacket: stainless steel,Diameter inside: 690,Diameter outside: 800,Total height: 2,300,Type plate: Yes,Outlet: DN40 DIN 11851 ,Remarks: Solid pipe coil approx. 5 turns slight metallic discoloration

Used steam boiler made by LOOS model DF6600. New 1999. Designed for the production of process steam. Heating surface: 14.70 m²

ALL PURPOSE 2-SHAFT SHREDDER 1.250 mm.60 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 17-21 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 30 kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.25 knives in sturdy steel, 50 mm.thick, 2 hooks (f ...

Max. permissible Pressure: 24 bar Test pressure: 45.6 bar Max. permissible Temperature: 224 C Steam capacity: 12000 kg/h Total volume: 19800 l Subject to prior sale - errors possible! Internal reference number: D-1223

Max. permissible Pressure: 16 bar Test pressure: 30.4 bar Max. permissible Temperature: 204 C Steam capacity: 10000 kg/h Total volume: 16400 l Subject to prior sale - errors possible! Internal reference number: D-1224

Technical Specifications: - Manufacturer: Urbas - Model: UR-FFR-3500 - Year of Manufacture: 2011 - Thermal output: 3.5 MW System Components : - Material supply system - Firebox with grate - Heat exchanger and Eco filter - Filter system - Chimney system and flue gas ducts including thermal insulation - Ash disposal and ash container - Hydraulic units including lines and hydraulic oil - Electrical system and switch cabinets - System control including PC and software - Aboveground heating network including insulation and heating fittings - Complete thermal insulation - Building structure: roof with trusses, facade, doors, access platforms, and gratings Find more here - / Contact us at -

Boiler capacity 25 kW/h Space to be heated: 600 m? Fan: 0.17 kW Air displacement: 2200 m?/h Chimney connection diameter 180 mm

We are offering, available for immediate delivery, an Exhaust Gas Steam Boiler, removed from a well-maintained Combined Heat and Power (CHP) installation. Designed to recover thermal energy from the exhaust gases of an MTU 1,600 kWe gas engine, this boiler converts waste heat into valuable process steam, significantly improving overall plant efficiency while reducing operating costs and CO₂ emissions. Technical Specifications Manufacturer: Ambitermo Engineering Model: RSB-H e 1130 Year of Manufacture: 2012 Steam pressure: 11 bar Thermal output: 784 kW Heating surface: 292.49 m² Capacity: 6,692 litres Design temperature: 20–188°C Hydrostatic test pressure: 17.05 bar Empty weight: 10,400 kg Fuel source: Engine exhaust gases Construction Standard: EN 12952 / EN 12953 CE Certified Complete Heat Recovery Package The system includes a three-way exhaust gas dive ...

external wort boiler for brewhouse 130 hl knockout capacity;, Additional title: tube and shell heat exchanger, Pressure shell/tube: 2 bar, Volumke shell/tube: 200 l, Material: stainless steel 1.4541 (AISI 321), Base construction: vertical tube and shell heat exchanger with compensator and with support, Features: Steam- and condensate fittings; safety valvel

Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Three-pass steam boiler (Loos, 1994) with oil and gas firing for the production of 7000 kg/h of steam. The boiler water chamber holds 90 hl of water. Other components: - Combination burner (Saacke) for oil and gas firing - Gas control system - Oil supply with suction pump unit (hp technik) - Economiser (2005) with a heat output of 275 kW - Feedwater tank (Loos, 1994) with a capacity of 40 hl - Water softening system (Pentair, 2024) - Feedwater pump (Grundfos) with a power rating of 5.5 kW - Operating hours counter for oil and gas operation - Control cabinet with operating elements - Various pipework, valves and fittings, Additional title: oil- and gas-fired steam boiler of the three-pass design with an economiser, Steam capacity: 7000 kg/h, Max. operating overpressure: 10 bar, Water volume steam boiler: 9000 l, Position: lying on foundation plate, Base construction: three‑pass boiler d ...

Technical data of the blast pot: Capacity 2 x 37 litres. Length of the hose 2.5 m. Working pressure 4 - 9 bar Air consumption Approx. 170 to 500 l/min Packaging dimensions 80 x 80 x 40 cm. Approximate weight. 36 kg Very useful for sandblasting on large outdoor objects. Condition: never used / new (5) Auction-ID: A7-48486-30

Technical data of the blasting vessel with extraction: Capacity 80 litres. Length of the hose 2.5 m. Working pressure 60 - 125 PSI. Air consumption approx. 250 - 600 l / min Packaging dimensions 102 x 46 x 51.5 cm. Weight Approx. 36 kg Very useful for blasting places on large objects or outdoor objects. Delivery incl. microfilter with extraction. Condition: never used / new (5) Auction-ID: A7-48486-192

Manufacturing number: 80788 Permissible operating overpressure: 11 bar Volume: 1500 l Permissible operating temperature: 50°C Auction-ID: A7-48624-50

Pump out of order, sold with blue pallet of boiler parts. Auction-ID: A1-48931-332

Diesel tank, storage tank, service station, tank plant, steel tank, storage tank with 10,000 litres of content according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. Dimensions: L = approx. 5.30 m / D = 1.60 m / weight approx. 2.2 tons. / ex works, freely charged. General: You will r ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 20,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 6,840 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Of course, you can also use your tank ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 9,990 mm Diameter approx. 2,000 mm Weight approx. 6,500 kg Of course, you can also use your t ...

Alfa Laval MMB 305 Skid

FOR SALE 2 SETS COMPLETE SKID ALFA LAVAL LUB OIL PURIFIERS SU 821 H TO WHOM IT MAY CONCERN; WE VE 2 SETS COMPLETE SKID ALFA LAVAL LUB OIL PURIFIERS SU 821 H AT OUR STOCK. PLS FIND DETAILS OF COMPLETE PURIFIERS ON BELOW TYPE SU 821 H ARTICLE NO. 535559205 SER NO. / YEAR 107165 & 107166 2008 FREQUENCY 60 Hz VOLTAGE 575Volt MADE IN SWEDEN SEPARATOR TYPE S 821 NO. / YEAR 4166952 & 4166953 2008 FREQUENCY 60 Hz MADE IN SWEDEN IF YOU HAVE ANY FURTHER QUESTIONS. PLS DO NEED HESITATE TO CONTACT WITH US. PURIFIERS RADOSAVLJEVIC TO TRANSPORT. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

FOR SALE ALFA LAVAL ECOSTREAM OILY WATER CLEANING COMPLETE SYSTEM TO WHOM IT MAY CONCERN; WE VE COMPLETE SYSTEM ALFA LAVAL ECOSTREAM OILY WATER CLEANING SYSTEM AT OUR STOCK SYSTEM RUNNING HOUR IS ONLY 3HRS . IT IS BRAND NEW . , EPC 50, 15 PPM Alarm and all accessories PLS FIND DETAILS ON BELOW ALFA LAVAL ECOSTREAM ART-NO. 585420-01 AL R SA 52658 MADE IN ITALY 60 HZ FREQUENCY 440V SEPARATOR BRPX 307 TGD-71 ELECTRICAL BOOSTER EH-W25 L1500 YOB 2014 EX STOCK READY TO TRANSPORT IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH SU. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Daub baking master 22.5 m and 178 stove is a state in TOP general and thorough outdated. functions as anew. anew steam apparatus. anew elektrik anew hearthstones incl. Daub Thermooel-boiler arrangement sales incl. cargo and assembly on inquiry I also have to sell other uberholt DAUB oven THERMO-OEL price on inquiry contact: + 48 692 345 660 anbox.pl

Fuel tank heating oil reservoirs for oil storage tank 20,000 Litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = approx. 6.90 m / D = 2.00 m / weight CA. 4,2 tons. / free charged ex works.

Daub Backmeister 18m² Furnace is in TOP condition, General and thorough overhaul. Works like new. New steam apparatus. New electrics New cooking hobs incl. Daub thermal oil boiler system Sale incl. freight and assembly on request I also have to sell other overholt DAUB oven THERMO-OEL Price on request Contact: +48 692 345 660 anbox.pl

Fuel tank heating oil reservoirs for oil storage tank 20,000 Litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = approx. 6.90 m / D = 2.00 m / weight CA. 4,2 tons. / free charged ex works.

Stove is in excellent condition, General and thorough overhauled. Works like new. New steam apparatus. New electrics New stove incl. daub thermal oil boiler plant Sales including freight and installation upon request I also have to sell other uberholt DAUB oven THERMO oil Price on request

Fuel tank heating oil reservoirs for oil storage tank diesel storage tanks 40,000 Litres according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = 8.70 m / D = 2.50 m / weight CA. 7.5 tons. / free charged ex works.

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

Fuel oil tank tank system diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 50,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9,000 kg Of course, you can also use  ...

Tanking system Heating oil tank Diesel tank storage tank Hazardous fuel tank Safety tank Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 50,000 liter double-walled storage tank for the storage of diesel. fuel oil or other hazardous substances as follows. Rated capacity 50 cbm Piece 1 used but overhauled, i.e. the container is cleaned, new reworked, primed and painted Colour equipment lacquer RAL. However, you can also make your own colour wishes at any time Bring. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate in accordance with DIN 6616 D/2 and type plate Piece.  ...

Daub baking master 27 m² Stove is in excellent condition, General and thorough overhauled. Works like new. New steam apparatus. New electrics New stove incl. daub thermal oil boiler plant Sales including freight and installation upon request I also have to sell other uberholt DAUB oven THERMO oil Price on request Contact: + 48 692 345 660 anbox.pl

Recon and Used in Stock

Oil pump, part no. 0R2770

New oil tank 100,000 liters for sale. Above-ground heating oil tank system 100,000 litres, D=2,900 mm Above-ground tank systems from Dehoust according to EN12285-2 (CE), class B, tank type D, for heating oil. Cyl. Storage tank made of steel, double-walled, with filled control liquid Glymin NF (approval no. BAM 1.4/12481-5.1/6035). Standard with a Dom DN 600 with dome cover, gasket and screws. Container inside raw, outside all parts sandblasted and with simple primer. Incl. synthetic resin paint on the outside in RAL colour. Complete tank system equipped with: - welded-on saddle feet - optical leak detector type LAS, approval no. Z-65.24-381 including Test and control liquid for refilling. (up to Ø2000mm pre-assembled) - Tank fitting for heating oil (pre-assembled up to Ø2000mm), consisting of: Filling tube 2" with TW closure Suction combinatio ...