129,254 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Racking hall consisting of cantilever racks and pallet racks, OHRA, floor area approx. 867m2 – used - : Price from location: 99.500.-€ (net), for self-dismantling! Price for disassembly on request. For an extra charge, the material for closing a gable side is also available! Manufacturer: OHRA Year of construction: 2019, the sheets 2021 Dimensions of the hall: Width approx. 17.35m Length: approx. 50m Height: Shelf approx. 6,385mm Height ridge approx. 7.10m After dismantling, one long side of the hall is open (where it now stands at the existing hall) Cantilever rack: 2 rows of 25 double-sided frames = a total of 50 pieces of cantilever rack frames double-sided Arm length: 1.20m Arm Load: 1,400kg Load center of gravity: 600mm Stand load per side: 4,200kg Wheelbase: 2m Arms are plugged in Arms with load deflector, device for roll-off protection Incl. palle ...
Key data: 850 KG, 11000 mm
Pallet drive-in rack, Ohra, 850kg / pallet, 2,470 pallet spaces, also for CP1 industrial pallets – used -: Price from location: 44.500.-€ (net), incl. dismantling etc.! Manufacturer: Ohra Type: Drive-in shelving system Year of Make: 1997 Load per pallet: 850kg Channel width: approx. 1.48m Channel depth: approx. 8.56m Height: approx. 11m and 8.10m approx. 68 shelf compartments total 247 channels 25 fields with 3 channels 43 fields with 4 channels Capacity per channel: 10 Euro pallets or 7 CP1 industrial pallets Total capacity: 2,470 Euro pallets Condition: good Available: immediately Location: Rhineland-Palatinate
Kragarmregal OHRA 3 m high Over 100 m in stock, see pictures. Height 3 m high Boom 100 cm Load capacity/boom 800 kg 4.5 running metres, 4 pcs. stder with boom Negotiation price: € 1,440,-- /net Offer consists of: 4 St. Stander with foot 3 m high 4 adjustable booms, per stand 100 cm, load capacity 800 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Load capacity per stand per side 3,200 kg Height of 2.5 m, 4 m or 6 m available Other compilation on request: Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, ...
OHRA Kragarmregal NEW Negotiation price: € 1,760,-- net They offer on a shelf with a length of 4.5 m, consisting of: 4 stand with foot, 4 m high + 3 adjustable booms per stand (120 cm), load capacity 1100 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Arm length / boom 120 cm Load capacity 1100 kg / boom Load capacity per stand per side 3500 kg Over 100 meters available Heights of 2.5 m, 4 m or 6 m are available. Other compilations on request.
For sale is a used cantilever rack Ohra. Condition very good. Columns H8140mm two-sided - 5 pieces load capacity stand 11360kg per side Level: feet + 10 Cantilever = 1200mm IPE 140 (load capacity 1420 kg) Price 10.500 € net Delivery possible throughout Europe. Available 24 stands and 400 cantilever arms If you are interested, please contact +48601553406 or biuroregalux.pl
Diameter: 710 mm Number of teeth: . St. Width of teeth: 6 mm Bore: 80 mm : 120 mm Thickness: 5 mm number: 30 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Product description (Item no. KAR251) 1 covered cantilever racking system with canopy and rear wall as well as available drainage Total length: approx. 83 linear meters. Make: OHRA System: Cantilever arm 60 one-sided design Year of Make: 2015 galvanized version 50 Pieces Stand Stand height: 6,000 (5,740 + 273) mm 50 Pieces Feet Foot length: 2,800 mm Profile: 273 x 136 mm Column load per side: 1,500 kg/ max. approx. 100 pieces arms 2 = pieces per stand Type: K60K Arm length: 2,500 mm Profile: 140 x 75 mm Arm load: 500 kg/ max. Load centre of gravity: 1,250 mm Wheelbase: approx. 1,500 mm with cross bandages and arm bridges between the cantilevers 3 pieces per box Profile: 82 x 47 mm Length: 1,400 mm Rising roof arms Length: 3,500 mm Profile: 120 x 65 mm Webs Length: approx. 1,350 mm Profile: approx. 82 x 47 mm Condition: used Full ...
Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Handover: in its current condition as inspected -Housing: Damage/corrosion, see pictures -Manufacturer: Ohio Electric Motors, Permanent Magnet Motor -Type: C-561339X8829 -Power: 0.74 kW -Speed: 2200 rpm -Voltage: 36 V -Transmission: Browning Part No. 20QC56L -Translation: 7.5 :1 -Shaft: Ø 19 x 35 mm/Ø 25 x 30 mm -Dimensions: 395/210/H195 mm -Weight: 21 kg
Pressureless dust filters for mounting on silos, material bunkers, etc. in standard steel version. Equipped with 20 pcs. fabric filter hoses (200 mm x 2,000 mm long each), incl. electric vibro cleaning. Filter area: Approx. 25 m2. In very good condition, several filters available (same construction).
used
OVERHAULED IN 1997, SAW BLADE DIA.: 1000 MM, DRIVE PIN HOLES: 4 x 30/200 MM; ROUND MATERIAL DIA.: 360 MM, SQUARE: 330 MM; FLAT PROFILES: 600 x 260 MM, 6 STEPS OF SPEEDS,
Saeege leaf grinding machine Grinding diameter max 1000mm without the pictured seed leaf, very easy to use, purely mechanical without CNC or NC, but perfect! Operating instructions Further data is not available at the moment. Special price
Non-automatic scale as platform scale, accuracy class III, approval T8029, weighing range 1 kg - 150 kg, calibration value 50 g Manufacturer No. B147482290, Type T32XW Platform 650x500 mm Weighbridge and tripod stainless steel Base: Lacquered steel, WZ IP 67 Display in stainless steel housing IP65 Power supply
Pumpe - Bremse für Zylinder - Pump - Brake for Cylinder Heidelberg OHZ KS Year 1959 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Resistance DANOTHERM CBV 215C 5R ( CBV215C5R ) 290699 Dimensions: 215 x 35 x 60 mm
Resistance Electrical Switchgear Eisenach Type: GSE 7023 - 2ES87 - 2DC0 P20: 20 kW P DB: 5 kW I max: 39 A I DB: 16 A U: 774 V R: 20 Ω Dimensions:16 Abr /br /U: 774 Vbr /br /R: 20 br /br /Dimensions:16 Abr /br /U 500 x 420 x 320 mm
Contact: Alexander Kosir a.kosir@tbauctions.com +43 6641029345 Auction-ID: A7-44901-8
Schließrahmen - Frame OHT Letter Press Heidelberg OHT A4 -24 Frame OHT Tiegel -8 Frame KS Cylinder -1 Frame KSB Cylinder -2 Frame S Cylinder -4 Frame SBG Cylinder -1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
in our stock HEIDELBERG OHT | Original Heidelberger Platen - Serial: 102265 - Year 1955 - Paper size: 26 x 38 cm Good working condition We gladly make you an offer. Please send us an email for this purpose.
Dimensions (L/W/H): 0x0x0 mm Weight: 35 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Lenze, braking resistor -Type: 100 Ohm 0.6 kW -Dimensions: 640/90/H115 mm -Weight: 3.2 kg
Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ralakde high current resistor -Type: Test voltage 2.5 kV/34 Ohm/1.3 A -Number: 4x available -Price: per piece -Dimensions: 190/65/H85 mm -Weight: 0.4 kg
Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ralakde high current resistor -Type: Test voltage 2.5 kV/34 Ohm/1.3-1,8 A -Number: 2x available -Price: per piece -Dimensions: 190/65/H85 mm -Weight: 0.4 kg
Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ifo, 4 pieces EMF 50 6.8 ohms in series -Dimensions: 200/50/H110 mm -Weight: 0.4 kg
Braking resistor, charging resistor, damping resistor, filter resistor, brake chopper -Brake resistance: adjustable -Power: 110 Ohm / 2.5 A -Dimensions: 435/90 / H150 mm -Weight: 3.2 kg
Mains choke, mains filter, frequency converter, frequency converter, drive converter, Line Filter. Smart Line Module -Manufacturer: Siemens, mains choke line filter for 10kW -Type: MLFB 6SL3000-OHE21-OAAO -Voltage: 3AC 380-480V, 47-63Hz, 24A -Dimensions: 265/60/H120 mm -Weight: 2.3 kg
sheet width: 1570 mm plate thickness: 10 mm pre-bending: 8 total power requirement: 7 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,5 x 1,5 x 1,55 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 115.163 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
colour units: 1 0 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 145.285 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 100.524 include HAKRO Hotfoil unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 175.887 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 145.346 include HAKRO Hotfoil unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1966 - Serial-No. 155017 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1962 - Serial-No. 137806 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1974 - Serial-No. 186 403 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1964 - Serial-No. 149218 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1957 - Serial-No. 120523N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 194.443 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2070 mm plate thickness: 10 mm pre-bending: 8 mm total power requirement: 7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4050 x 1470 x 1550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Exhibition machine OHE 90 Brush deburring Manufacturer Pilous Connection 400 V, 50 Hz Drive power 2.2 kW Speed 1,400 /1 min. Max. material cross-section 90 x 90 mm Number of brushes 1 - 3 pcs. Machine dimensions 500 x 300 x 330 mm Weight 47 kg Freight costs Austria EUR 50,- excl. Freight costs Germany EUR 75,-
cutting diameter: 250 mm saw band length: 0 mm cutting width: mm workpiece dia.: 150 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal band saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTSerial-No. 194543Year 1983
Stanztiegel / DIE Cutter Tiegel Heidelberg OHTSerial-No. 171075 N
max. wheel diameter: 500 mm gear width: 125 mm max. module: 8 ram stroke range: 135 mm max.helical angle: 41 ° table diameter: 500 mm no. of teeth: 12 - 300 total power requirement: 7,5 kW weight of the machine ca.: 6 t 2021 completely overhauled and equipped with controls and new motors. suitable for internal & external gear shaping with: - Control unit - chip conveyor - coolant - change gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reference Num.: 4386 Brand: Heidelberg Type: CYLINDER OHZ - 54 x 72 cm Size: 540 x 720 mm Available: 12.02.2026 Status: Not in production Location: Deutschland Sheet size: max 540 x 720 mm Printing units: 1
Heidelberg OHZ S, age 1956 540x720 mm (21x28") for die-cutting Available: at short term
Heidelberg OHT A4 size Original Heidelberg Hotfoilsystem
Heidelberg OHT SNR: 133501N Year: 1961 Size: 26 x 38 cm Equipment: chases (2) - Heidelberg print-autoplaten - sheet formats min 40x70mm / max 260x380mm - print-/ cutting format max 260x350mm - max speed = 5.500 sph - equipped with ink unit - oil drip tray - weight = 1.100 kg - W168 x D124 x H158cm - 380V/400V - 50Hz - 1.3 kW
sheet width: 2070 mm plate thickness: 25 mm pre-bending: 18 diameter of upper rolls: 320 mm side roll diameter: 260 mm diameter of lower rolls: 320 mm : 26 kW : 8100 kg : 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
900 € 
