offset printing used for sale

Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and  ...

Manufacturer: MYCRONIC Model: MY600 Year of Manufacture: 2016 The MY600 represents the top of jet-printing technology, enabling precise and fast solder-paste deposition for demanding electronics manufacturing. The machine is ideal for modern production lines with high quality requirements. KEY FEATURES • Highest throughput: 50 percent higher than previous models • Over 1 million dots per hour • Stencil-free technology for precise application of solder paste on complex PCBs • Advanced motion system technology from Mycronic for SMT production lines Find more here - / Contact us at -

Technical data: Material width: min. 130 mm, max. 270 mm Material width: max. 244 mm Print repeat length: min. 101.6 mm, max. 254 mm Machine components: • Corona treatment • 5 × offset printing units • 1 × flexo printing unit • Flat hot foil stamping unit • Flat die-cutting unit

impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

evopro Test Bench Printing AmbientLight P585 Manufacturer: evopro systems engineering AG Description: Test bench printing AmbientLight Project No.: P585 Serial number: 0001 Year of Make: 2017 Feed-in: 230 V / 50 Hz / 13 A (L+N+PE) Design: Closed test bench for printed AmbientLight modules Structure: Aluminum Profile Rack With Complete Test Cabin Application: Optical and functional testing of lighting or AmbientLight components

Reference Num.: 4291 Brand: Xerox Type: Versant 280 Construction year: 2023 Impressions: 1 mio Available: directly Status: In production Location: Deutschland

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control. Accessories: Cooling package HRS050 L/W, sieving station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder container, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, inspection possible by arrangement.

Reference Num.: 4290 Brand: Xerox Type: Primelink B9136 Construction year: 2023 Impressions: 6 mio Available: directly Status: In production Location: Deutschland

impressions: 46 Mio. max. printing speed sheets: 12000 /h max. paper size: 52 x 74 cm dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference Num.: 4266 Brand: Ricoh Type: C7200SX Construction year: 2015 Impressions: 5 mio Available: directly Status: In production Location: Deutschland

Reference Num.: 4168 Brand: Xerox Type: D136 Construction year: 2014 Impressions: 11 mio Available: directly Status: In production Location: Deutschland Equipment: - Doppelbogenkontrolle - Duplexdruck

Reference Num.: 4340 Brand: Xerox Type: DC 700 Construction year: 2011 Impressions: 7 mio Available: directly Status: Not in production Location: Deutschland

Ovit Sirio TH120, thermal Processor

Laminator Triplex solventbased  Min. material thickness 12 my , Max. material thickness 120 my, Cylinder width 1300 mm, Material width = 1250 mm, Unwinder and rewinder (turnstile) Roll diameter max 1000 mm, Sleeve 152 mm, Speed (mech.) = 350 m/min

We are offering for sale the following Konica Minolta multifunction devices: - Konica Minolta C652 (2 devices) - Konica Minolta C284 - Meter Reading : 1152531 - Konica Minolta C224e (2 devices) - Meter Reading Machine 1 : 0985831 - Meter Reading Machine 2 : 0554450 Find more here - / Contact us at -

Manufacturer: Bobst Model: Flexo 200 Feeder type: Vacuum sheet feeder with pneumatic pressure plate Anilox rollers: All used, ceramic Printing units 1–4: 160 lines/cm, maximum feed volume 8.5 cm³/m² Printing unit 5: 100 lines/cm, maximum feed volume 10.5 cm³/m² Doctor blade system: Ceramic anilox rollers with metal doctor blade Vacuum sheet transport: Yes, 2007 vacuum transport (modified stainless steel suction plate) System upgrades: Sheet cleaning and warm air dryer, both Type 2 200 from DUO-TECHNIK; steam pressure reduction station from Helmut Herbert GmbH The running speed of the system is approximately 4,000 sheets per hour. Spare parts: ST= pieces Bezeichnung Lief.Artikelnr. Bestand BasisME Freilauf FK 24 AP BSA1101010400 2 ST Freilauf FB 44 SF BSA1101047600 2 ST Rutschnabe kplt. M. Kettenrad 16H7 Z20 RN 250M-1/KR 2 ST Reibscheibe RN 250/RS RN 250/RS 8 ST Tell ...

Equipment em260 year of manufacture 2001 total - 4 Mio m A 2001 Gallus EM 260 is a narrow-web, modular flexographic printing press designed primarily for label production and packaging. Often branded under the Gallus Arsoma line during that era, these machines are known for their robust construction and ability to handle various substrates, including paper and film. Retrofit of the entire machine control system in 2016 8 x printing units with dual drive, max. printing width 250 mm 3 x punching stations (2 x with adjustable counterpunch cylinders (Spilker Variabase)) Printing cylinders 8x each (1/8"): z=88, z=92, z=96, z=100, z=108, z=116, z=120, z=124, z=132 Additional counterpressure cylinders for thin and thick materials Magnetic cylinders, min. 3x each (various gap dimensions, 1/8"): z=88, z=92, z=96, z=100, z=108, z=116, z=120, z=124, z=132 46 x anilox rollers for all appl ...

Printing plate bending HD/Nela SM 102 B; suitable for Heidelberg Speedmaster SM 52-102; max. Plate length 811mm. Plate bender HD/Nela SM 102 B; used for Heidelberg Speedmaster 52-102: max. plate lenght 811mm.

em510 , built in 2007 3 x printing units with dual drive, max. printing width 510 mm 3 x punching station (2 x with adjustable counter-punching cylinders (Spilker Variabase)) Cliché cylinders (1/8"): 3 x 88, 3 x 92, 3 x 96, 3 x 100, 3 x 108, 3 x 116, 3 x 120, 3 x 140 Magnetic cylinders (1/8"): 2 x 96, 3 x 100, 3 x 108, 3 x 116, 3 x 120, 4 x 140, 3 x 176, 3 x 184, 2 x 192, 1 x 222 13 anilox rollers (cm3): 4.1; 5.04; 6; 6; 6.3; 6.09; 8; 8.25; 9.58; 13; 13.51; 16.57; 30 2 x new anilox rollers 3 x sleeve holders z=88 for coating (with assembly station) Screen printing unit Laminating station 2 x grid winders on rails (up and down) 3 x Uviterno UV system (240 W/cm) 2 x NIR drying modules for aqueous systems (Lambda technology) Corona system 2Kw (SIT) Web edge control: E&L (2 x ultrasonic sensors, 1 x line sensor) Video: E&L Elscan Outfeed conveyor for individual labels Doub ...

max. printing speed sheets: 8000 /h max. paper size: 32 x 46 cm dampening system: Aquaprint numbering unit: incl N+P The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: 76 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm numbering unit: include N+P dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: SAKURAI Model: Oliver 466 SDP Year of Manufacture: 2014 Type of Machine : 4-Color Sheet-Fed Offset Printing Machine Maximum Paper Size: 26x20 inches (660x508 mm) Counter: 34.4 million impressions Specifications: - Maximum Speed: - 16,100 sheets/hour - 15,000 sheets/hour in perfecting mode - Paper Thickness Range: - 0.0016–0.016 inches (0.04–0.4 mm) Features: - CIP 3 Connection: Integrated with x-rite densitometer for accurate and efficient color calibration and workflow integration. - SCC II Color Control Console: Advanced color control system for consistent and high-quality output. - Automatic Roller Washing System: Ensures quick and efficient cleaning of rollers for reduced downtime. - SPC Plate Changer: Streamlined plate-changing mechanism for enhanced productivity. - SAS (Sakurai Auto Set): Fully automated format setting for: - Attachment - Delivery - Page  ...

Pressure plate bending hatchet PB-S; suitable for Heidelberg Speedmaster 52-105; Floor-standing device. Plate bender axe PB-S; used for Heidelberg Speedmaster 52-105; standing device.

Letterpress Type: HK 250 Manufacturer: Hikari Unwind x 6 UV leterpres print unit, Ist UV dryer Punch air unir Flat diecut unir Slittinfg unit x2 rewind unir (revolver) Label counter Machine in good condition, fully funcrional Find more here - / Contact us at -

G&J HDX150 ( Kodak T-HDX 1500 )

Manufacturer: Comiflex Model: Vale 1208 Year of Manufacture: 2011 Machine Type : 8-Colour Gearless Flexographic Printing Machine Number of colours: 8 Condition: Immaculate, manufacturer-serviced only, full service history available Print Specifications - Material width: 1280 mm - Print width: 1200 mm - Minimum repeat length: 380 mm - Maximum repeat length: 840 mm - Machine speed: 300 m/min Anilox Rolls (8 included) - Face length: 1260 mm - Engrave length: 1240 mm - Outside diameter (OD): 171.88 mm - Inside diameter (ID): 149.722 mm Sleeves (8 included) - Inside diameter (ID): 114.708 mm - Face length: 1210 mm Ink and Registration Systems - Ink pump: Phonematic with autowash system - Camera and registration system: FIFE Find more here - / Contact us at -

Coolers for Glunz+Jensen Plate Developing Machines; Model 8735001001; cleaned and tested; suitable for Glunz+Jensen plate development machines. Chiller for plate processors Glunz+Jensen; Model 8735001001; cleaned and checked; used for Glunz+Jensen plate processors.

Agfa Elantrix 125 SX Plate Developing Machine; cleaned and tested; incl. Scrub Kit; suitable for thermal plates; max. Panel width 1250mm, min.200mm; min. Panel length 300mm; Plate thickness 0.15-0.40; Cooling. Plate processor Agfa Elantrix 125 SX; cleaned and checked; included scrub kit; used for thermal plates; max.plate width 1250mm, min.200mm; min. plate lenght 300mm; plate thikness 0.15-0.40mm; Chiller.

DTG printing line 1. Epson SureColor SC-F3000 year 2021, printer software 2. Press mobi duo 3. Impregnator Schulze 4. Hot air drying cabinet DIDO PRO In good condition, fully functional Find more here - / Contact us at -

Digital printer Type: AccurioPrint C2060L Manufacturer: Konica Minolta Year: 2017 Speed: 60 pages/min (A4) Format: A5 – 330 × 487 mm Long sheet (bypass): up to 330 × 1300 mm Weight: 62 – 350 g/m² Number of copies: 1,177,146 Equipment Large capacity paper tray (LCT) with blower 2× standard magazine Bypass feeder (long sheet up to 1300 mm) Main Output Tray (without stacker) Consumables included in the price Toner: Cyan 2×, Magenta 2×, Yellow 1×, Black 3× (original) Waste container: 3× Printer in good condition, fully functional Find more here - / Contact us at -

Digital printer Type: Bizhub Press C1070 Manufacturer: Konica Minolta Year: 2016 including consumables Printer in good condition, fully functional Find more here - / Contact us at -

grey model, long box Standard equipment with conventional dampening powder spray, Min. sheet size : 14x18 cm, printing area : 45x64 cm, Plate size: 650x550 mm (0,15 -0,5 mm thickness), Blanket size: 677x525 mm (1,9 mm thickness), Speed up to 6000 sph, 4 kW, Dimensions: 219x145x143 cm, net weight: 2650 kg,

Size: 48x65 Counter: 51mio High Pile delivery Conventional Dampening CPC Stram feeder Perfecting 1/1, 2/0 Weko powdering

Format Max. sheet size: approx. 370 × 520 mm Min. sheet size: approx. 105 × 145 mm Image area: approx. 360 × 520 mm Material Paper thickness: approx. 0.03 ? 0.4 mm Paper weight: approx. 40 ? 300 gsm (typical range) Performance Speed: up to ~13,000 ? 15,000 sheets/hour Machine Data Dimensions (L × W × H): approx. 2860 × 1850 × 1620 mm Weight: approx. 2,600 ? 4,800 kg (depending on configuration) Equipment / Features Alcolor continuous dampening system Technotrans cooling / circulation unit EasyPlate (semi-automatic plate change) CP Tronic / control console automatic blanket &, roller wash-up devices electronic double sheet detection suction feeder system powder spray unit (e.g. Mediprint)

Year: 1988 Counter: ca. 100mio Details: Size 72x102 cm approx 100 mio impress. Year 1988 Alchol Dampening RCI Rolandmatic powdering unit

Heidelberg SM 52-4+NP Year: 1999 Counter: 62 mio Size: 36x52 cm Autoplate Alcolor dampening Technotrans cooling Auto. Blanket washer device Auto. Cylinder washing device Auto. Roller washing dwvice CPC 1.04 Cptronic Straight machine / No perfecting Weko 200 powdering Numbering and perforating unit

Year: 2015 Size:72 x 1030 Details: 16500 SPH PQC-S PDC S II CIP3/4 Semi APC Plate Cocking KMS IV monitoring system KHS - AI ( Advanced Interface) Cosmotech water chilling system Auto Ink roller wash Auto Blanket Wash Wall loading system Ultrasonic Double Sheet Detector

Size: 36x52 counter: 62mio Aquatron dampening Weko powdering Double sheet control Plusversion

Counter: 86mio PQC, QAPC KOMORIMATIC WASHERS POWDER SPRAY

Heidelberg SM 74-5PH Year: 1997 Counter: 129mio Size: 52x74cm Autoplate Alcolor Technotrans cooling All auto. Washers IR dryer CPC 1.04 Cptronic Alphatronic powdering

Manufacturer: Ryobi Model: 756 Year: 2006 Size: 53x75cn Counter: ca. 66 mio Equipped with: Semi Auto Plate Change Ryobimatic Dampening AAC (Aqua automatic control system) Ryobi PCS-G Remote Console Ryobi PDS-E PQC Technotrand Alpha D 20 Grafix Powdering All Auto wash up device

? Speed 16,000 ? Auto Plate ? Auto Blanket Cleaning Device ? Auto Ink roller Wash up device ? Ink oscillating from roller ? Preset Stream Feeder ? Multi Sheet Detector ? Double sheet control in side marks ? Powder spray Unit ? Central Air supply cabinet ? Pneumatic pull side guide ? Technotrans

CODIMAG VIVA 340 mm Waterless Year 2001 max. width: 330mm 5 offset units waterless 1 hot foilstamping unit 1 varnishing unit 6 IST UV dryers Kocher &, Beck GapMaster Rewinder/ Unwinder Waste rewinder Inline slitter Corona pretreatment BST Web inspection

Detail: Speed 16,000 Auto Plate Auto Blanket Cleaning Device Auto Ink roller Wash up device Ink oscillating from roller Preset Stream Feeder Multi Sheet Detector Double sheet control in side marks Powder spray Unit Central Air supply cabinet Pneumatic pull side guide Technotrans Max sheet size: 920 × 640 mm Min sheet size: ~410 × 290 mm Max print area: ~900 × 615 mm Substrate thickness: 0.04 ? 0.6 mm

Nilpeter FB 4200 S UV dryers (GEW) all stations Corona Treater 2 Die Stations Sheeting Station Roll Lift 1 Waste Rewind 1 Product Rewind with Roll lift Magnetic Dies

Heidelberg OHT SNR: 133501N Year: 1961 Size: 26 x 38 cm Equipment: chases (2) - Heidelberg print-autoplaten - sheet formats min 40x70mm / max 260x380mm - print-/ cutting format max 260x350mm - max speed = 5.500 sph - equipped with ink unit - oil drip tray - weight = 1.100 kg - W168 x D124 x H158cm - 380V/400V - 50Hz - 1.3 kW

Equipped for die cutting with inking unit Size: 46 x 58,5 cm Weight: 3300 kg Power Req.: 380 V / 50 Hz Power Requirement: 3,5 kW Space Requirement 2800 x 1700 x 1700 mm

Dimensions: - Length: 3500.0 mm - Width: 1800.0 mm - Height: 1850.0 mm Weight: 5300.0 kg Paper Specifications: - Maximum Paper Length: 77.0 cm - Maximum Paper Width: 56.0 cm - Minimum Paper Length: 21.0 cm - Minimum Paper Width: 21.0 cm Production Capacity: - Maximum Sheets per Hour: 4600.0

SCODIX ULTRA 202 Year 2019 Printing counter: only 230.000 copies Paper size Min: 29 x 42 cm Paper size Max: 54 x 78 cm Printing size Max: 74 x 50 cm Foil technology Digital in-line with Scodix PAS foil technology Foil roll width (min/max) 50-500 mm/1.97-19.68 in Foil roll size Diameter:max 30 cm, Length:max 2,000 m, Core:77mm/3 in Max number of simultaneous rolls Up to 4 rolls Polymer layer thickness From 5 up to 250 microns Substrate weight 135-675 gsm/6-30 points Substrate thickness Up to 700 microns Foil film type Wide variety of industry standard hot/cold foil films Substrates Offset, Plastics, laminated and coated/uncoated substrates Resolution Up to 2540 x 450 DPI Variable Data Enhancement (VDE) PDF, optimized PDF, barcode system (optional) Scodix RSP? Technology 4 CCD camera system, RSP? (Rotate, Scale, Position) algorithm, automatic positioning, ± 100 micron image to image regis ...

NEW Machine Paper size max 54 ? 72 cm Paper size min 180 ? 300 mm Paper sheet thickness 0.90 mm Foil-pulls &, programs Standard 2 ? upgradable to 4 Heating zones 6 for optimal temperature allocation Available in following sizes: 38 x 52 40 x 58,5 56 x 77 56 x 82 64x90 Optional: Hologram unit Delivery time: 3-4 Month after order