offset printing used for sale

For sale are eight professional high-performance Xerox Nuvera EA 314 production printers, ideal for print service providers, data centers, and high-volume businesses. Manfuacturer: Xerox Model: Nuvera EA 314 Year of Manufacture: 2021 Print Speed: Up to 314 images per minute (duplex printing) Print Resolution: 4800 x 600 dpi Paper Sizes: A5 to SRA3 Media Weight: 60–300 g/m² Finishing Options: Booklet Stitcher, Hole Punch, Folding Unit (depending on configuration) available from Xerox Black/White Printer Toner System Counter Count: Approx. 35 million prints Included: - Xerox Nuvera EA 314 main unit with two printing units - Three feeders, one of which is for color page feeding - Inserter (Decurling station) - Two stackers (stackers) - Documentation / Manual as PDF Special Features: - Very high print speed and quality - Ideal for high print volumes and professional applica ...

Completely overhauled ready for testing Machine Electronic device for sheet travel control Air conditioning for the electrical cabinet Gripper bars C.U.B.E. Bobst-electronic for managing the machine C.U.B.E. Bobst-electronic for managing the complementary equipment BM Main motor Feeder Pile-tray with handle allowing manual lateral correction of the pile during production SPECIAL SHEET BREAKER DEVICE. To push the sheets downwards, ensuring good stacking NON-STOP FEEDER MANUAL DEVICE Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try KERSTEN ANTISTATIC DEVICE ON THE SHEET FEEDER FOR SHEET TRAVEL Introduction table Covered by antistatic steel stainless plate Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle 4 front lays, adjustable in p ...

A complete 8-color Fischer & Krecke flexographic printing system is available. Number of colors: 8, max. print width: 1250mm, max. material width: 1300mm, repeat print length min./max.: 320mm/800mm, max. mechanical speed: 360m/min, printable materials: PET (min. 12µm)/PP/OPP/LDPE/laminate materials. Inks: solvent-based, drying: thermal oil. Roll diameter: 800mm, core diameter: 76mm/152mm. Including BST Video Web Inspection System Premius, cleaning system Flexpress AutoClean (ACA), viscosity control Bloss Viscolor 1300, automatic roll change and rewind Flying Splice as well as an additional chill roll with a diameter of 460mm. Documentation available. On-site inspection is possible.

A complete screen and gravure printing system for paper and non-woven wallpapers is available. Output: 15000 rolls/24h, substrates: paper: 80g-150g/m², non-woven: 50g-150g/m², printing width: 1060mm, working width: 1200mm, printing speed: 5m-150m/min. Components: Preconditioning, gravure printing unit, 5x screen printing units, 2x screen gravure printing units, 5x intermediate dryers (standard version), 2x intermediate dryers (1.5 times dryer height), 1x main channel with 6x 4m zones, roller/unwinder, register embossing, double-head printing units. Including various peripheral devices and units. Total dimensions X/Y/Z: approx. 60m/8m/6m. Documentation available. On-site inspection is possible.

An Eickmeyer flat printing machine with parallel lifting upper frame is available. Printing format X/Y: 500mm/800mm, max. screen frame dimensions X/Y/Z: 1050mm/520mm/30mm, max. workpiece height: approx. 140mm, operating hours: approx. 50h. Documentation available. On-site inspection is possible.

A screen printing machine ESC (Europa-Siebdruckmaschinen-Zentrum) overhauled in 2004 is available. Print format: 1000mm/1400mm, max. print material thickness: 7mm, max. screen frame dimensions X/Y: 1540mm/1800mm. Documentation available. On-site inspection is possible.

A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.

Print format: 960mm/1260mm, max. print material thickness: 35mm, screen adjustment X/Y: +/-15mm, squeegee speed: 0.2m-1.2m/s, max. print output: 850 pieces/h, machine dimensions X/Y/Z: approx. 2850mm/2200mm/1350mm. Documentation available. On-site inspection is possible.

impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Crestline The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Print dimensions X/Y: 880mm/1250mm, max. material thickness: 5mm, max. material weight: 3000g/m², max. frame dimensions X/Y: 1350mm/1590mm, max. frame profile height: 50mm, fine register adjustment: +/-16mm. Gripper edge: 4mm, squeegee and flood speed: 1.5m/s, squeegee angle adjustment: 60°/90°, cycle speed: 1050 cycles/h, infeed height: 965mm, outfeed height: 780mm, machine weight: approx. 800kg. On-site inspection is possible.

A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.

A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 20 ...

Web width min./max.: 214mm/686mm, max. roll diameter: 1500mm, production output: 1000 covers/min. The machine is not equipped with peel-and-seal, but only with wet gumming. Including printing unit 2+1. The machine can cut and punch envelopes with windows. Documentation available. On-site inspection is possible.

Total actual Printing hours, only 26,000, Specifications:, Infeed Conveyor for feeding Vertical Lid Stacks, Robotic removal of Lids from stack to Print Unit Conveyor, Auto-Denester Unit, No Lid no Ink and No Lid no Print System, ARCOTEC CG20-2 Pretreatment station, Main 6-Color Print Unit, Speed Control for Ink Fountain Rollers, Printing Roller self-cleaning device, Max. speed 30,000 Lids/ hr (depending on Lid size & shape), Max. Lid dia. Ø 200 mm, Min. Lid dia. Ø 50 mm, Max. Lid Height 25 mm, Max. Rectangular Lid size: 200 x 200 mm, Max. Printing dimensions: 180 x 180 mm, No. of Printing Blankets 4, UV Tunnel TUV 0077-99, UV-Tunnel power rating : 8 kW, Main printer power rating: 20kW, Polytype Counter/ Stacker unit, delivers Counted Vertical Stacks., 400 V 3phase, 50 Hz,, Printing Plate Pre-registration Unit., Max Lid dia: Ø 200 mm, Min Lid dia: Ø 50 mm, Max Lid Height: 25 mm, Max R ...

A Winkler + Dünnebier envelope printing machine is available. Envelope type: peel & seal gumming, format range side seam min./max.: 114mm x 150mm/330mm x 450mm, format range center seam min./max.: 114mm x 150mm/230mm x 450mm, paper weight range: 70g-165g/m², production output: 250 envelopes/min. Including vacuum pump and blow air pump. Documentation available. On-site inspection is possible.

Format range: Envelopes min./max.: 114x176mm/254x324mm, Booklet min./max.: 114x127mm/270x360mm, Pockets: With center seams min/max: 114x178mm/330x406mm, With side seams min/max: 114x178mm/254x406mm. Output: Dextrin or peel and seal: 600/min, latex gumming: 400/min. Documentation available. On-site inspection is possible.

Pressure plate punch Beil 780/425-S-H-AP2; cleaned and tested; die-cut 780 and 425 mm autoplate; Investment Contact. Plate punch hatchet 780/425-S-H-AP2; cleaned and checked; punch size 780 and 425mm Autoplate; contact for plate.

Buser Rotary Printing Machine (Switzerland) Model: CH-3428 Type: R5B E 1850/24L Year: 1997 Printing: Blades Blanket newly installed Conveyor in Good condition Colours: 24 Open Bearing with Repeats: 640, 720, 820, 914, 1018 Repeat Gears: all Repeats 12 sets available Sequgee: Different Sizes (1 Lot) Entry with Dust Suction Slot High Efficiency 3 pass Two Dryer Chambers with Gas Heated Sequgee Washer 01 Set Screen Washer 01 Find more here - / Contact us at -

A screen printing system including a feed table with XY adjustment is available. Printing area: 800mm/500mm, max. print object height: 160mm, max. frame dimensions X/Y/Z: 1290mm/760mm/40mm, max. printing speed: 500 prints/h, machine dimensions X/Y/Z: approx. 1700mm/1100mm/2000mm, weight: approx. 450kg. Documentation available. An on-site inspection is possible.

Reference Num.: 4203 Brand: Hewlett Packard Type: Indigo 7500 Construction year: 2011 Impressions: 49 mio Available: directly Status: Not in production Location: Deutschland

Reference Num.: 4206 Brand: Kodak Type: NexPress 2500 Construction year: 2017 Impressions: 22 mio Available: directly Status: Not in production Location: Deutschland

Reference Num.: 4205 Brand: Kodak Type: NexPress SX 3300 Construction year: 2014 Impressions: 13 mio Available: directly Status: Not in production Location: Deutschland

Reference Num.: 4204 Brand: Hewlett Packard Type: Indigo 7500 Construction year: 2011 Impressions: 71 mio Available: directly Status: Not in production Location: Deutschland

Bluhm Systeme Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. The system with its small dimensions of 188 x 80 x 98 mm can be easily installed in or on production plants. The print head reaches top speeds of more than 180 m/min and has IP-65 protection class. The printing system is equipped with a display for data entry as well as changing and checking system settings. Operators can check or change variable print information and settings directly on site on the user-friendly display. Intuitive control is via an i-Logic button. In addition, maintenance statuses can be shown on the display. The Integra One is particularly compact with dimensions of 188 x 80 x 98 mm and was specially developed for system integration. Smart cartridge monitoring Intelligent SmartCard Cartridge Monitoring identifies the current ink type and autom ...

We are offering for sale a Perfecta cutting line, all components built in 2013, consisting of: 1.High-Performance High-Speed Cutter Perfecta 168 TS Cutting width: 1,680 mm, usable rear table length: 1,680 mm Working height: 165 mm, min. offcut strip: 26 mm Pressing force: 3.5-60 kN Material clamp + rotating saddle, 6 carbide knives, with 5 knife boxes Table height: 890 mm Side tables on the right: 1 x 1.5 m, left: 1 x 0.5 x 1.5 m + 0.5 x 1.25 m Net weight: 6,900 kg - Total: 6 knives, all in good condition, 2 of which are almost As good as new The unloader can also be rotated 90 degrees parallel to the paper discharge direction if required. 2.Perfecta ZTS 2750 Clamp Transport System For automatic feeding of the high-speed cutter via the rear table.The cutting line is in very good condition and still in production. Max. clamp travel: 2,750 mm Insertion height without adapter: ...

Feeding unit for Dalex welding press

Converting Line GM 330 FB-D (Hot stamp + Screen print) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Max. web width: 350 mm Min. web width: 50 mm Unwind diameter: max. 700 mm Rewind diameter: max. 600 mm - Vetaphone Corona - BST web edge control Hot foil stamping unit (flatbed) Speed: 6,000 stamps/h or 10-15 m/min Web width: 110 mm - 330 mm Dual foil unwind and rewind with a diameter of 250 mm Substrates: 50-500 μm Board thickness: 5-10 mm; 7 mm is standard Plate pressure: 30 tons Foil feed in transverse and longitudinal directions (rotating tower) Temperature range 80°-130° C Heat-up time approx. 20 min. Screen printing unit Speed 4000 print runs/h or 5-15 m/min. Web width 110 mm - 330 mm Frame size 660 mm x 500 mm Frame type 30 mm x 30 mm aluminum frame Printing area 330 mm (length) x 330 mm (width), Manufacturer: Grafisk Maskinfabrik, Substrates: 50-500 um

Muller Martini Graph print inserts 22" with 1/4" pitch.

Brush kit and rollers Agfa Elantrix 95 SX; used. Brush Kit and rollers for Agfa Elantrix 95 SX; condition used.

Printing units outside/inside: 3/1, doctor blade units: available, envelope size range: booklet min./max.: 100mm/150mm–180mm/254mm, pocket min./max.: 89mm/120mm–187mm/305mm. Documentation available. An on-site inspection is possible.

Width 35 cm Year of manufacture 1987 Thermal relief printing IR Dryer Mobile substructure Delivery date: short-term Price on request. We supply and install worldwide.

Printing units outside/inside: 2/1, doctor blade units: 3, production capacity: 800 envelopes/min, window unit: Mini-Splice 356 CMG, roll/splicer: Winkler + Dünnebier 191, web guiding: BST EKR 1000, gumming: standard remoist (moisture-activated gumming for sealing flaps), ink pumps: 2, extraction: window punching waste. Documentation available. An on-site inspection is possible.

Manufacturer: Kornit Model: Breeze Print count: 128,500 - The printer is sold without print heads - It has an integrated pre-treatment unit. - The set includes tables for body and sleeve prints, as well as for children´s t-shirts. I have a Kornit Breeze printer for sale, from a Polish distributor. The print count is 128.5 thousand. The printer is sold without print heads. It has an integrated pre-treatment unit. The set includes tables for body and sleeve prints, as well as for children´s t-shirts. The printer has not been used for a year. I can issue an invoice if needed. There is also an option to purchase individual parts – we can sell 3 different mainboards, tables, manifold, side doors, or the wiper mechanism. The machine was installed here in November 2018. The manuals show the date 2017, the year is most likely one or the other. Find more here - / Contact us at -

A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.

Reference Num.: 4228 Brand: Konica Minolta Type: bizhub PRESS C1100 Construction year: 2018 Available: directly Status: In production Location: Deutschland

A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible.

Reference Num.: 4242 Brand: Xerox Type: Nuvera 120 EA Impressions: 10 mio Available: directly Status: Not in production Location: Deutschland

Reference Num.: 4288 Brand: Xerox Type: D110 Construction year: 20181000 Impressions: 9 mio Available: 10.12.2025 Status: In production Location: Deutschland

Reference Num.: 4289 Brand: Xerox Type: D110 Construction year: 2018 Impressions: 6 mio Available: directly Status: In production Location: Deutschland

Printing inserts for Muller Martini Grapha 16". For more info please inquire.

Technical data: Printing Section 5 × UV Flexo Printing Units 5 × UV Dryers Web Inspection BST PowerScope 300 – Web Inspection System Unwinder Max roll diameter: 1250 mm Heavy-duty construction with pneumatic shaft and web tension control Integrated splice table and web guiding system Rewinder Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section 24" Supports reprocessing or secondary processing of pre-printed materials Additional Modules Ben Bunch 500 Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) Cross Cutting Cylinder (inline sheeting or perforation — precise  ...

Number Of Colours: 9 // Maximum Diameter: 175 mm

Number Of Colours: 7 // Rim Diameter (Max): 160 mm

1 DGEN digital textile printing machine type ARTRIX H8 model 740TX/V H8BR, with DGEN standalone dryer type DR-180H3, year 2020, maximal printing width 1820 mm 8 colors, 1280 nozzles on each color, sticky belt fabric feeding system

Manufacturer: Schiavi / BOBST Model: Rigel Year of Manufacture: 2001 Colors: 8 Print possibilities: 4+4 Materials: LDPE, HDPE, BOPP, CPP, PET, ALU, PAPER, BIO Gearless: No Checked up: 2022 by BOBST technicians both mechanic and electric parts Max Speed: 300m/min Fast Sleeve Change: Yes Fast Sleeve Anilox Change: Yes Computer Supervision: Yes Web Width: 1320mm Print Width: 1290mm Min Print Repeat: 430mm Max Print Repeat: 1200mm Unwinder Type: Double Turret Automatic Flying Splice Winder Type: Double Turret Automatic Flying Splice Max Reel Diameter Unwinder: 800mm Max Reel Diameter Winder: 800mm Drying: Thermal Oil Video camera: Yes (FIFE) Corona Treatment: Yes (Cason) for conductive and non-conductive materials Web Guides: In and out (BST) Viscosity Control: Gama (not in use, must be repaired) Inking System: Ceramic Anilox + Chambered Doctor Blades Anilox Sleeves ...

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Reference Num.: 4318 Brand: Xerox Type: DC 700 Construction year: 2013 Impressions: 4 mio Available: directly Status: In production Location: Deutschland Equipment: - Duplexdruck - Scanner - Brosch?renfinisher - Fiery

The EKRA X4 (also referenced as X4-Prof in some documentation) is an automatic screen and stencil printer used in the electronics/SMT (surface-mount technology) manufacturing industry. It is designed to print solder paste or glue onto PCBs (printed circuit boards), ceramics or glass substrates. Key specs from the brochure: print area up to about 460 × 460 mm (≈18 × 18 in) for the X4-Prof version. Features include: a welded steel frame for stability, vacuum under-screen cleaning system, optical vision alignment system (EVA™) for precise alignment of stencil to substrate Find more here - / Contact us at -

Production speed: 600 cups/min Colours: 8 Min cup diameter: 60mm Max cup diameter: 130mm Min. cup height: 30mm Max- Cup height: 160mm Counter: 25’731’666 cups produced Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler