offset printing machine used for sale

A Belotti 5-axis CNC gantry milling machine is offered. Travels X/Y/Z: 12000mm/3000mm/2000mm, C-axis: +/-200°, A-axis: +/-115°, milling head: Cytec, spindle power: 20kW, torque: 48Nm in S1, max. spindle speed: 24000rpm, control: Siemens 840D. Documentation available. Inspection possible by arrangement.

• Machine length: 13,300 mm • Machine width: 3,300 mm • Web width: 600 mm • Operating voltage: 200 VAC, 50/60 Hz, 3-phase • Power rating: 62 kVA • Current: 179.1 A • Maximum output with stacking system: 180 cycles/min • Main operating side: left-hand side in the direction of travel Production Capabilities: • Three-side-sealed pouches • Stand-up pouches with elliptical bottom (Doypack) • Pouch width: 60–250 mm • Pouch length: min. 110 mm, max. 270 mm (two lanes), max. 540 mm (single lane) • Bottom gusset: 40–90 mm (extended, including edge trim) • Processable materials: PP/PE, PET/PE, PET/ALU/PE • Film thickness: 80–250 μm Equipment: • Parent-roll unwinder with web edge control • Unwinder with winding shafts for 76 mm and 152 mm cores • Maximum clamping width: 1,200 mm • Maximum roll diameter: 800 mm • Bottom-gusset s ...

width of the strips: 75 mm band length: 2000 mm band speed: 30 - 34 m/sec total power requirement: 4,1 HP weight of the machine ca.: 75 Kg dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

CO2 2d laser Model MAZAK NTX48 Champion Year 1999 Hours worked 53052 Power 1500 watts Hybrid type axis movement (X axis table movement, Y and Z axis head movement) X-axis longitudinal travel 2650 mm Y-axis transverse travel 1270mm Z-axis travel 100mm Machinable dimensions 2500x1250mm Head with capacitive sensor Mazatrol L-32B CNC Control Maximum machinable thicknesses with 5-inch head now supplied --6.0mm iron -3.0mm stainless steel -2.5 mm aluminum (with 7.5 inch head Iron 12.0mm Stainless 6.0mm theoretical) External dimensions: Length 5563mm

Used Dunkes DF 350 punching machine/printing press Auction-ID: A1-50936-134

Kneader Kemper F125 SL Kneading Machine Menger -Lifting kneader with fixed boiler -for max. 200 kg dough or .max 125 kg flour -with 2 speeds -Stainless steel boiler and lifting arm -with flour dust cover -Boiler diameter inside 90cm -Boiler height inside approx. 50cm -can be used on wheels with 2 locks

Dear customers currently we offer you a refurbished columns or column drilling machine from F. Zimmermann for sale. The special feature of the machine is the work table adjustable in 3 levels. Here are the other technical data of the machine: Speeds: 100 - 2,250 rpm Work light MK3 recording (new) Swivel radial: 360° Swivel axisial: 2x 90° Quill stroke: 160 mm Projection column spindle center: 500mm Table: 490 x 400 mm Centering disc Ø: 55 mm H7 working height swivel table: 715 mm working height base plate: 1,215 mm Base plate and table with T-slot 12 mm Dimensions: 600 x 1,120 x 1,930 mm Power: 1.5 kW Weight: approx. 500 kg After the overhaul, the machine has a completely new electrical system including engine brake, is painted light grey in RAL 7035 and comes with a drill set. We look forward to your questions and inquiries! If you have any questions, please ...

Counter: number sets: 2092702 // sheets: 2102565 // stapling: 1807398 // folds: 2022952 // cuts: 1763900 Equipment: 2xTOWER BST10 / BST 10 (each 10 stations) M.No.: 02 01 4 1834 M.No.: 02 11 4 1769 BDF M.No.: 40 12 4 1046 Two spare wire stitching heads included

ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60

This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2000. This GILDEMEISTER NEF 320 features a robust control system by HEIDENHAIN. If you are looking to get high-quality turning capabilities, consider the GILDEMEISTER NEF 320 machine we have for sale. Contact us for further details.

Dear customers currently we offer you a used disc or disc grinding machine for model and mold making of the brand HoPa. Here are the technical data of an S 650 machine: Disc diameter: 600mm Table length: 950 mm Table width: 470 mm Table working height: 900 mm Table swivel: 30/45° Schraegan stop: 60/60° Power: 2.2 kW Speed: 1,000 rpm Right-left rotation Emergency stop with engine brake Dimensions: 110 x 85 x 140 cm Weight: 315 kg Documentation incl. CE and declaration of conformity available! Accessories such as inclined stops, adhesives and grinding wheels included. We look forward to your questions and inquiries!

WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS 2. AWAILIBLE Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm

This 3-axis Proth PSGC-50120AHR surface grinding machine was manufactured in 2021. It features a table size of 500 x 1,200 mm and a maximum travel of 560 x 1,350 mm. The machine has a continuous table load capacity of 1,200 kg and includes a digital readout system retrofitted in 2022. If you are looking to get high-quality grinding capabilities, consider the Proth PSGC-50120AHR machine we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic L3050 was manufactured in 2003. It features a powerful TRUMPF TLF 5000 CO2 laser with a capacity of 5 kW, making it suitable for various cutting applications. The machine has been connected to power and is fully operational, with a history of maintenance ensuring reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details.

This 3-axis LVD Orion 3015 Plus was manufactured in 2014. It features an X-axis travel of 3,000 mm and a table size of 1,500 × 3,000 mm, equipped with a powerful 2,500 W laser. If you are looking to get high-quality laser cutting capabilities, consider the LVD Orion 3015 Plus CO2 laser cutting machine we have for sale. Contact us for further details.

Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below. 1 Quickmelt incl. evaluation device level.

Eillert Salad spinner Model: MSD-500-V Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph

Spiral kneader Kemper ST 125 A + 2 boilers used spiral kneader Kemper ST 125 A extendable with 2 stainless steel boilers immediately available in the warehouse in Bielefeld. Trade-in and shipping costs on request. Type: SP 125 A with 2 boilers, optional extra boiler to purchase for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers Boiler diameter 90cm -Bott capacity: 300 litres Boiler drive by friction wheel Boilers are manually locked extendable with 2 automatic timer relays 2 speeds fast and slow Flour dust cover Stainless steel spiral and tools Boilers are also made of stainless steel Machine is anchored in the ground with 2 screws Machine head moves up and down when the boiler is retracted and extended 400 volt power supply robust and stable machine Tested for function

Spiral Kneader Diosna SP 120 AF Spiral kneader Diosna SPV 120 AF extendable - Spiral kneader extendable - for max. 120 kg dough or .max 75 kg flour - 2 speeds -Membrane keyboard - with 1 extendable stainless steel boiler - Spiral made of stainless steel - with pliers locking - Boiler is with friction wheel drive - Head hydraulically raising and lowering - Vat capacity 180 litres

CNC punching machine manufactured in 2008. This TRUMPF TruPunch 5000 features a punching force of 220 kN and offers multifunction capabilities, including multi-shear, multi-bending, and thread-forming functions. It also incorporates deburring and rolling technology, along with a small-part sensor for programmable part guidance. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 5000 machine we have for sale. Contact us for further details.

This 4-axis TOS WHN 9 B CNC boring machine was manufactured in 2007. It features a cross travel of 1370 mm and a longitudinal travel of 1130 mm, with a table clamping surface of 1120 x 990 mm. The machine is equipped with a spindle diameter of 90 mm and a spindle speed range of 9–1120 rpm. If you are looking to get high-quality boring capabilities, consider the TOS WHN 9 B CNC machine we have for sale. Contact us for further details.

20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll   10 Looms working and 10 looms are stopped Each loom can be tested before shipment.

Brochure production Nagel Foldnak 8

We sell a Sinmag spiral kneading machine incl. 3 tank cars (suitable for max. 120kg dough). The machine is in good bakery condition.

Reference Num.: 4285 Brand: MBO Type: T45-F Available: directly Status: In production Location: Deutschland Equipment: - 4 Falztaschen - Kreuzbruch

Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit

Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost  ...

KHS Anker Roland 10 HS – Rotary Labelling Machine, Year of Manufacture 2004 1. General Information The KHS Anker Roland 10 HS is a used rotary labelling machine manufactured in 2004, with a capacity of up to 12,000 bottles per hour. The machine is designed for continuous wrap-around labelling of PET bottles and is suitable for integration into existing filling and packaging lines in the beverage industry. Labelling is performed using the hot-melt glue process, with leading-edge and trailing-edge gluing. For this purpose, the machine is equipped with two KHS glue units. Bottles are fed into the labelling carousel via an infeed timing screw and an infeed starwheel. They are held in position between rotating bottle plates and centring bells and labelled during carousel rotation. The leading-edge gluing system enables the label to be picked up from the label magazine, while the trailing ...

Dough dividing and warp knitting machine WP Rotamat CN 30 pieces -30 pieces -for dividing and rounding doughs -Weight range per dough piece from 30grams to 70grams -Dough insert up to a maximum of 2100gr. -with plastic knife -Dimensions 62x53x140 WxDxH -including 3 knitting plates

Drill grinding machine 3 -50mm. 90° - 140° , free angle and grinding style freely adjustable, T 810 / W 570 / H 1260mm , 120kg ; 380 V/ 50Hz ;

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 100 x 30 mm -Clamping depth: 90 mm -Dimensions: 280/150/H65 mm -Weight: 4.2 kg

Auction-ID: A1-51251-27

Kneader Diosna S 120 Plus Kneading Machine -with 1 timer -with stainless steel boiler and lifting arm -with flour dust cover -2 speeds slow and fast -Machine is mobile on castors with lock -400 volts

Rego SM3 stop and stirring machine Stop and mixer Rego SM3 -for max. 30 liters -with automatic run via timer -manual run -stirring and beating

Auction-ID: A1-51251-26

GeneralUniversal Milling Machine; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Benefit PackageBenefit Package consisting of: Swarf conveyor, with cleaned slot screen Internal coolant supply 40bar/600l Air blast through spindle centre Application Tuning Cycle 3D quickSET (pre selection, measuring probe) Spindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp /  ...

Dough Kneader Spiral Kneader Diosna SP 120 F -Type: SP 120 F -with membrane keypad -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor - 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -Weight of the machine approx. 550 kg -Condition "good"

This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.

This 3-axis AWEA LP4025 gantry milling machine was manufactured in 2003. It features an impressive X-axis travel of 4,000 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 760 mm. The machine includes a robust table size of 4,020 × 2,400 mm and a maximum table load of 15,000 kg. If you are looking to get high-quality milling capabilities, consider the AWEA LP4025 gantry milling machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TruLaser450 was manufactured in 2006. It features a working area of 4000 x 2000 x 115 mm and a powerful 5000 W CO2 laser. The machine includes advanced automation with an automatic pallet changer and various cutting heads for high-speed and thick sheet cutting. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser450 CO2 laser cutting machine we have for sale. Contact us for further details.

turning diameter: 520 mm turning length: 1500 mm control: Fagor total power requirement: 15 kW weight of the machine ca.: ca. 3,5 t dimensions of the machine ca.: L/B/H 3,50x1,50x180 m more info to follow The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fiber Laser Machine HLF1530 8KW - IMMEDIATELY AVAILABLE high-quality equipment Laser power: 8kW - VA up to 20mm, FE up to 30mm Sheet size: 3000 x 1500mm Equipment: Precitec Auto Focus Procutter Cutting Head IPG resonator with 8kW incl. German ! On-site warranty THK Guided Tours fast, automatic changing table Sheet metal layer detection automatic nozzle cleaning Siemens touchscreen control with LAN/USB Siemens Drives CE safety by TÜV Süd Sick light barriers around the changing table Will include: Warranty CAD CAM Software Commissioning Delivery within Germany Training offered We have been servicing YAWEI machines for the European market for more than 15 years. We are your service partner for all questions. You can test an identical machine at any time with us under power. Come and visit us !

2-roller banding machine drinking flax ZW 400; cleaned and tested; Working width 400mm; Glue basin height adjustable; suitable for cold glue; 2 pcs. in stock. Two rollers gluing machine potions ZW 400; cleaned and checked; working width 400mm; glue reservoir adjustable in hight; used for cold glue; two machines on stock.

TOP CONDITION - OVERHAULED IN 2022 ! - 1 year warranty Year of construction: 2007 Panel format: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick puncture incl. ball roller table incl. 4-fold head change magazine incl. 2 cutting heads incl. 10-fold automatic nozzle changer FE: up to 24mm VA: up to 15mm oxide-free designed for high-pressure cutting up to 20bar no foundation needed ! Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training Always regularly serviced

Bread slicer Treif Diskus 400 Bäko Line circular knife -Circular knife bread slicer Treif Diskus 400 -with new knife -digital control - Cutting width adjustable from 3mm to 15mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Rated power 0.9 kW - Years of construction 2007 to 2012 External dimensions : width 80cm depth 70cm height 112cm

This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine.

This 3-axis Hexagon Global S 05.07.05 was manufactured in 2021, featuring a measuring range of X 500mm, Y 700mm, Z 500mm. It includes an indexable swivel head, HH-AS6-T5, and an HP-S-X1S touch probe with a standard styli set. Ideal for precise measurements in extended temperature ranges (16-26 °C). If you are looking to get high-quality measuring capabilities consider the Hexagon Global S 05.07.05 machine we have for sale. Contact us for more information.

Bous Waschfix Industrial cleaning and degreasing system The system is ideal for workshops, production plants, mechanical engineering or automotive companies for automatic and thorough cleaning and degreasing of workpieces, machine parts and tools. The device cleans highly efficiently using a hot water spray (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, handling is absolutely safe and uncomplicated. • Integrated ultra-fine filter for a longer service life of the wash water and cleaner cleaning results. • Integrated drain pump for effortless pumping of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Technical data Manufacturer: BOUS Cleaning & Degreasing Systems Type / Model:  ...