offset printing machine used for sale

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 194.443 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 Farben Offsetdruckmaschine - 2 Color Sheet-Fed Offset Press Heidelberg GTO52-2+ Year 1991 - Serial-No. 703998 Size max. 360 x 520mm Impressions 78 Mio. Dampening System Alcolor with Baldwin Plus Version - Straight machine Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Reference Num.: 4149 Brand: EPSON Type: Stylus Pro 7900 Construction year: 2011 Available: directly Status: In production Location: Deutschland Equipment: - SpectroProofer - diverse Toner und Verbrauchsmaterialien

Reference Num.: 4147 Brand: Xerox Type: Versant 180 Press Construction year: 2016 Impressions: 5 mio Available: directly Status: Not in production Location: Deutschland Machine size: Length: 1,212 mm, Width: 760 mm, Height: 831 mm Total weight: kg 295 / lbs 650 Equipment: - Duplexdruck - Finisher - Scanner

Reference Num.: 4148 Brand: Xerox Type: Versant 180 Press Construction year: 2016 Impressions: 4 mio Available: directly Status: Not in production Location: Deutschland Machine size: Length: 1,212 mm, Width: 760 mm, Height: 831 mm Total weight: kg 295 / lbs 650 Equipment: - Duplexdruck - Finisher - Scanner - Fiery

Reference Num.: 4036 Brand: Konica Minolta Type: Bizhub Pro 951 (black / white) Construction year: 2013 Impressions: 6 mio Available: directly Status: In production Location: Deutschland Equipment: - Scanner - Duplexdruck - Locheinheit - Brosch?renfinisher - Falzeinheit

ESC-HIGH PRESS ´PLUS´ E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder A dryer can also be added /listings/3715380-used-wicket-long-term-dryer Find more here - /

EKRA Drucker X3 Automatic Screen & Stencil Printer is expected to be available at the end of 2024 This system is part of an entire assembly line that can be purchased in its entirety It has a modified hood so that large stencils can also be used. This is the retrofitted stencil cleaning system (stencil underside cleaning). Installed in the machine The X3 automatic screen and stencil printer is specially designed for the flexible production demands of today’s market. The X3 can be used for the application of solder paste and / or glue onto PCBs, ceramics or glass substrates up to a size of max. 460 x 460 mm (18 x 18 inches). The standard EKRA screen and stencil holder has a flexible design which allows it to be used with all common stencils / screens up to 740 mm (29 inches) without use of an additional adapter. Quick clamp adapter systems of various manufacturers can e ...

2018 Tampoprint Automatic printing and laser system consisting of: Conveyor system with transfer units for parts from transport trays to separation Multi-color pad printing system with IR drying cell Laser cutting cell with optical recognition Separation and packing station Find more here - / Contact us at -

1996 GUK Falzmaschinen K 52/4 KTL - F4 Manufacturer: GUK Falzmaschinen Country: Made in Germany Type: K 52/4 KTL - F4 Year of Manufacture: 1996 Nominal Voltage: (Not specified, space for voltage in V and frequency in Hz) Nominal Power: (Not specified, space for power in kW and current in A) Find more here - / Contact us at -

Gallus R200 (refurbished by Graficon in 2005) Label printing machine Machine definition 1 UV rotary screen + 7x UV letterpress + 1 UV flexo Rotary hot stamp unit (after 5th unit) Printing to glue / liner (2 units) 2x rotary die cutting unit Longitudial slitting Technical parameters: Max. width of material: 222 mm Max printing width: 205 mm Magnetic cylinders: 72, 78, 84, 90, 96, 132, 136 teeth Printing cylinders: 72, 78, 84, 90, 96, 103, 110, 117, 124, 132 teeth Collars for screen: 110, 117, 124, 132, 144, 156, 168 teeth Cores for hot stamp: 72, 78, 84, 96, 103, 110, 117, 124 teeth Find more here - / Contact us at -

Manufacturer: Pitney Bowes Model: DI 425 Condition: used Find more here - / Contact us at -

Number of color 12 Width 1850 mm

For sale are eight professional high-performance Xerox Nuvera EA 314 production printers, ideal for print service providers, data centers, and high-volume businesses. Manfuacturer: Xerox Model: Nuvera EA 314 Year of Manufacture: 2021 Print Speed: Up to 314 images per minute (duplex printing) Print Resolution: 4800 x 600 dpi Paper Sizes: A5 to SRA3 Media Weight: 60–300 g/m² Finishing Options: Booklet Stitcher, Hole Punch, Folding Unit (depending on configuration) available from Xerox Black/White Printer Toner System Counter Count: Approx. 35 million prints Included: - Xerox Nuvera EA 314 main unit with two printing units - Three feeders, one of which is for color page feeding - Inserter (Decurling station) - Two stackers (stackers) - Documentation / Manual as PDF Special Features: - Very high print speed and quality - Ideal for high print volumes and professional applica ...

A complete 8-color Fischer & Krecke flexographic printing system is available. Number of colors: 8, max. print width: 1250mm, max. material width: 1300mm, repeat print length min./max.: 320mm/800mm, max. mechanical speed: 360m/min, printable materials: PET (min. 12µm)/PP/OPP/LDPE/laminate materials. Inks: solvent-based, drying: thermal oil. Roll diameter: 800mm, core diameter: 76mm/152mm. Including BST Video Web Inspection System Premius, cleaning system Flexpress AutoClean (ACA), viscosity control Bloss Viscolor 1300, automatic roll change and rewind Flying Splice as well as an additional chill roll with a diameter of 460mm. Documentation available. On-site inspection is possible.

A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.

An Eickmeyer flat printing machine with parallel lifting upper frame is available. Printing format X/Y: 500mm/800mm, max. screen frame dimensions X/Y/Z: 1050mm/520mm/30mm, max. workpiece height: approx. 140mm, operating hours: approx. 50h. Documentation available. On-site inspection is possible.

A screen printing machine ESC (Europa-Siebdruckmaschinen-Zentrum) overhauled in 2004 is available. Print format: 1000mm/1400mm, max. print material thickness: 7mm, max. screen frame dimensions X/Y: 1540mm/1800mm. Documentation available. On-site inspection is possible.

Print format: 960mm/1260mm, max. print material thickness: 35mm, screen adjustment X/Y: +/-15mm, squeegee speed: 0.2m-1.2m/s, max. print output: 850 pieces/h, machine dimensions X/Y/Z: approx. 2850mm/2200mm/1350mm. Documentation available. On-site inspection is possible.

Print dimensions X/Y: 880mm/1250mm, max. material thickness: 5mm, max. material weight: 3000g/m², max. frame dimensions X/Y: 1350mm/1590mm, max. frame profile height: 50mm, fine register adjustment: +/-16mm. Gripper edge: 4mm, squeegee and flood speed: 1.5m/s, squeegee angle adjustment: 60°/90°, cycle speed: 1050 cycles/h, infeed height: 965mm, outfeed height: 780mm, machine weight: approx. 800kg. On-site inspection is possible.

A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.

Web width min./max.: 214mm/686mm, max. roll diameter: 1500mm, production output: 1000 covers/min. The machine is not equipped with peel-and-seal, but only with wet gumming. Including printing unit 2+1. The machine can cut and punch envelopes with windows. Documentation available. On-site inspection is possible.

A Winkler + Dünnebier envelope printing machine is available. Envelope type: peel & seal gumming, format range side seam min./max.: 114mm x 150mm/330mm x 450mm, format range center seam min./max.: 114mm x 150mm/230mm x 450mm, paper weight range: 70g-165g/m², production output: 250 envelopes/min. Including vacuum pump and blow air pump. Documentation available. On-site inspection is possible.

Format range: Envelopes min./max.: 114x176mm/254x324mm, Booklet min./max.: 114x127mm/270x360mm, Pockets: With center seams min/max: 114x178mm/330x406mm, With side seams min/max: 114x178mm/254x406mm. Output: Dextrin or peel and seal: 600/min, latex gumming: 400/min. Documentation available. On-site inspection is possible.

Buser Rotary Printing Machine (Switzerland) Model: CH-3428 Type: R5B E 1850/24L Year: 1997 Printing: Blades Blanket newly installed Conveyor in Good condition Colours: 24 Open Bearing with Repeats: 640, 720, 820, 914, 1018 Repeat Gears: all Repeats 12 sets available Sequgee: Different Sizes (1 Lot) Entry with Dust Suction Slot High Efficiency 3 pass Two Dryer Chambers with Gas Heated Sequgee Washer 01 Set Screen Washer 01 Find more here - / Contact us at -

Reference Num.: 4203 Brand: Hewlett Packard Type: Indigo 7500 Construction year: 2011 Impressions: 49 mio Available: directly Status: Not in production Location: Deutschland

Reference Num.: 4206 Brand: Kodak Type: NexPress 2500 Construction year: 2017 Impressions: 22 mio Available: directly Status: Not in production Location: Deutschland

Reference Num.: 4205 Brand: Kodak Type: NexPress SX 3300 Construction year: 2014 Impressions: 13 mio Available: directly Status: Not in production Location: Deutschland

Reference Num.: 4204 Brand: Hewlett Packard Type: Indigo 7500 Construction year: 2011 Impressions: 71 mio Available: directly Status: Not in production Location: Deutschland

We are offering for sale a Perfecta cutting line, all components built in 2013, consisting of: 1.High-Performance High-Speed Cutter Perfecta 168 TS Cutting width: 1,680 mm, usable rear table length: 1,680 mm Working height: 165 mm, min. offcut strip: 26 mm Pressing force: 3.5-60 kN Material clamp + rotating saddle, 6 carbide knives, with 5 knife boxes Table height: 890 mm Side tables on the right: 1 x 1.5 m, left: 1 x 0.5 x 1.5 m + 0.5 x 1.25 m Net weight: 6,900 kg - Total: 6 knives, all in good condition, 2 of which are almost As good as new The unloader can also be rotated 90 degrees parallel to the paper discharge direction if required. 2.Perfecta ZTS 2750 Clamp Transport System For automatic feeding of the high-speed cutter via the rear table.The cutting line is in very good condition and still in production. Max. clamp travel: 2,750 mm Insertion height without adapter: ...

Printing units outside/inside: 3/1, doctor blade units: available, envelope size range: booklet min./max.: 100mm/150mm–180mm/254mm, pocket min./max.: 89mm/120mm–187mm/305mm. Documentation available. An on-site inspection is possible.

Printing units outside/inside: 2/1, doctor blade units: 3, production capacity: 800 envelopes/min, window unit: Mini-Splice 356 CMG, roll/splicer: Winkler + Dünnebier 191, web guiding: BST EKR 1000, gumming: standard remoist (moisture-activated gumming for sealing flaps), ink pumps: 2, extraction: window punching waste. Documentation available. An on-site inspection is possible.

A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.

Manufacturer: Kornit Model: Breeze Print count: 128,500 - The printer is sold without print heads - It has an integrated pre-treatment unit. - The set includes tables for body and sleeve prints, as well as for children´s t-shirts. I have a Kornit Breeze printer for sale, from a Polish distributor. The print count is 128.5 thousand. The printer is sold without print heads. It has an integrated pre-treatment unit. The set includes tables for body and sleeve prints, as well as for children´s t-shirts. The printer has not been used for a year. I can issue an invoice if needed. There is also an option to purchase individual parts – we can sell 3 different mainboards, tables, manifold, side doors, or the wiper mechanism. The machine was installed here in November 2018. The manuals show the date 2017, the year is most likely one or the other. Find more here - / Contact us at -

Reference Num.: 4228 Brand: Konica Minolta Type: bizhub PRESS C1100 Construction year: 2018 Available: directly Status: In production Location: Deutschland

Reference Num.: 4242 Brand: Xerox Type: Nuvera 120 EA Impressions: 10 mio Available: directly Status: Not in production Location: Deutschland

Reference Num.: 4288 Brand: Xerox Type: D110 Construction year: 20181000 Impressions: 9 mio Available: 10.12.2025 Status: In production Location: Deutschland

Reference Num.: 4289 Brand: Xerox Type: D110 Construction year: 2018 Impressions: 6 mio Available: directly Status: In production Location: Deutschland

Printing inserts for Muller Martini Grapha 16". For more info please inquire.

Technical data: Printing Section 5 × UV Flexo Printing Units 5 × UV Dryers Web Inspection BST PowerScope 300 – Web Inspection System Unwinder Max roll diameter: 1250 mm Heavy-duty construction with pneumatic shaft and web tension control Integrated splice table and web guiding system Rewinder Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section 24" Supports reprocessing or secondary processing of pre-printed materials Additional Modules Ben Bunch 500 Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) Cross Cutting Cylinder (inline sheeting or perforation — precise  ...

Number Of Colours: 9 // Maximum Diameter: 175 mm

Number Of Colours: 7 // Rim Diameter (Max): 160 mm

1 DGEN digital textile printing machine type ARTRIX H8 model 740TX/V H8BR, with DGEN standalone dryer type DR-180H3, year 2020, maximal printing width 1820 mm 8 colors, 1280 nozzles on each color, sticky belt fabric feeding system

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Production speed: 600 cups/min Colours: 8 Min cup diameter: 60mm Max cup diameter: 130mm Min. cup height: 30mm Max- Cup height: 160mm Counter: 25’731’666 cups produced Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler

Reference Num.: 4318 Brand: Xerox Type: DC 700 Construction year: 2013 Impressions: 4 mio Available: directly Status: In production Location: Deutschland Equipment: - Duplexdruck - Scanner - Brosch?renfinisher - Fiery

Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and  ...

Reference Num.: 4291 Brand: Xerox Type: Versant 280 Construction year: 2023 Impressions: 1 mio Available: directly Status: In production Location: Deutschland

Reference Num.: 4290 Brand: Xerox Type: Primelink B9136 Construction year: 2023 Impressions: 6 mio Available: directly Status: In production Location: Deutschland