offset printing 4 used for sale

We are selling here a skinning fleece from the manufacturer Maja, type EVM 437 in a very good used and functional condition. Runs on 400 volts, cutting width 43 cm, completely stainless steel, rollable, workshop tested, ready for immediate use, dimensions W/D/H 70/70/100 cm, others on request.

General SKU300U575 MakeFeutron Klimasimulation GmbH TypeKlimaprüfkammer KPK 400 No.003 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Volume400 Ltr. Max.temp.100 °C Specified Features - Drying oven Drying ovencheck Climate boxcheck Max. temperature+5/100 °C Capacity400 Ltr. Internal width720 mm Internal depth620mm Internal height860 mm Electric heatingcheck Electric capacity6,3 kW Number of doors:1 With air circulationcheck With fancheck Motor0,18 kW 220/230 Volt With air humidificationcheck With cooling compressorcheck With trayscheck (3x) MaterialStainless steel 1.4301 (304) Information With switchcheck Floorspace1,2x1,4 m Total height2,3 m Weight600 kg CEcheck Extra SpecificationsClimate Range: 10…95 °CTemperature Tolerance: (0.2…0.5)KHumidity Range: 10…98% relative humidityHumidity Tolerance: (2…3)% rel ...

General SKU212T486 LocationBarneveld CEcheck MakeAPV Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity300 m³/h With motor30 kW 380-690 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Centrifugal Pumps MaterialStainless steel 1.4408 Information TypeW-25/200-440 Mach.No.92214540915360000010 Year of construction1997 Floorspace1x0,7 m Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU210T078 LocationBarneveld MakeAlfa Laval Main Features MaterialStainless steel Motor30 KW Specified Features - Decanter Decantercheck InletDN80 Liquid outletDN150 Solids outlet500x300 mm Motor30 kW 400/690 Volt Hydraulic drivecheck With hydraulic unitcheck Motor0,22 kW 220-240/380-415 Volt Max. rotor speed3150 rpm MaterialStainless steel Information TypeSharples NX A4230 No.A91-115381 A Mounted on framecheck Floorspace2,9x1,9 m Total height2,9 m Weight2700 kgDecantersAlfa LavalCentrifuges > DecantersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU026N542 MakeTria (It) Type400/ELR No.33.0441.85 Mounted on framecheck Main Features Motor15 KW Inlet diameter400 mm Width420 mm Specified Features - Granulator MaterialMild steel Granulatorcheck Rotor width420mm Rotor diameter400mm Open rotorcheck Number of rotor knives3 Number of stator knives:2 With hoppercheck Inlet500x300mm Hinged topcheck Motor15 KW, 380 Volt Information LocationBarneveld With switchgearcheck Floorspace1,9x1,2 m Total height2,2 m Weight1300 kg Extra Specifications- OVERHAULED - Sieves included: 10 mm, 12 mm, 16 mm GranulatorsDiscountTriaMills > GranulatorsDiscountBrand > Tria What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKU209Y028 LocationBarneveld MakeAZO Main Features MaterialStainless steel Motor1.5 KW Length390 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesø 180 x 390 mm Screw sizesø 170 x 670 mm Inlet250 x 250 mm Outlet300 x 420 mm With inspection hatchcheck 255 x 140 mm Motor1,5 kW 220/380 V 1415 rpm Speed± 738 rpm Air purged glandscheck With sieve cagecheck Sieve perforation0,7 mm MaterialStainless steel 1.4301 (304) Magento base g_extra_specificationsFormer Foeth SKU 230K107 Information TypeE-450 Mounted on wheelscheck Floor space1,5 x 1,1 m Total height1,2 m Weight180 kgRotating sievesAZOSieves > Rotating sievesBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

Variabele snelheid met frequentie verzenden Distance between centers: 1000 mm Swing over bed: 402 mm Swing over cross-slide: 380 mm Swing in gap: 560 mm Diametre of main spindle bore: 42 mm Power on main spindle: 4 kW Number of speeds: 40 > 2800 rpm Digital screen: yes Length: 2390 mm Width : 910 mm Height: 1625 mm Weight: 1190 kg

Feed motor: 5,5 kW total power requirement: 58,3 kw weight of the machine ca.: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2006 CNC Control: Global Control Working area: 3 x 12 m Track width: 4,000 mm Track length: 15 m Extraction table 1 x Plasma torch with Hypertherm HPR260 1 x Plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filter system

Injection moulding machine Arburg 820S 4000-4600 BJ 2016

Motor: 2402 cm³ Motor power: 92 kW Top: Diesel Gear Range: Manual Drive: Rear-wheel drive Engine Model: FORD-D0FA Length 6601 mm Width 2084 mm Height 2342 mm Masses Gross Weight 4100 kg Registration weight 4100 kg Unladen weight 2725 kg Load capacity 1375 kg

grinding diameter: - mm grinding length: - mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ZIL 431412 (AC-40/130/63B) VIN: 2736862 Special Purpose Rooms Color: red Motor: 6000 cm³ Motor power: 110 kW Fuel: Petrol Dimensions Length 6830 mm Width 2420 mm Height 2900 mm Masses Gross Weight 9000 kg Registration weight 9000 kg Empty weight 6600 kg Load capacity 2400 kg

Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible.

Five identical industrial robots are available, number of axes: 4, reach: 3139mm, payload: 250kg, weight: 1.45t. With control system, no known defects. An on-site inspection is possible, not under power.

turning diameter: 820 mm turning length: 4500 mm control: Siemens Si 840 D sl total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m New purchase price in the year 2022 EUR 1.2 million Time recording from Feb. 2025 Operating hours = 16085 h Main spindle = 616 h Milling spindle = 369 h CNC control Siemens Sinumerik Si 840D sl Max. center distance 4500 mm Working height 1375 mm X-axis travel -15…+725 mm Y-axis travel -245…+4756 mm Swing diameter over cross slide 780 mm Swing diameter over bed 820 mm C-axis, smallest increment +/-0.001° Main spindle A15 with BVG, 3135 N,/2000 rpm Spindle head DIN 55026 Form A 15 Max. speed 3000 rpm Max. torque 3135 Nm Drilling/milling unit Milling power (40/100% duty cycle) 36.5/29.8 kW Torque up to 1110 rpm (40/100% duty cycle) 328/261 Nm Max. spindle speed 5000 rpm Swivel range (B-axis) -105…+95° Vertical travel  ...

Lehmann EA-407.1A CNC 4th Axis – Rotary Table – Fully Functional The Lehmann EA-407.1A CNC rotary axis is designed for CNC machining centers. It enables precise positioning and multi-sided machining of workpieces without the need for re-clamping. I have 5 pieces for sale, if you buy more, the price will be better.

I'm selling a Mazak FH-4800 pallet machining center. The machine is in very good condition. The spindle and axes operate quietly. A chip extractor and coolant tank are included. Machine parameters: X-axis travel: 560 mm Y-axis travel: 610 mm Z-axis travel: 560 mm Rotary table: 360/1 degrees Mazatrol PC Fusion CNC 640 M control Table length: 400 mm Table width: 400 mm Max. workpiece weight: 400 kg Tool magazine: 40 Spindle taper: SK40 Max. spindle speed: 12,000 rpm Spindle motor power: 22 kW Length x width x height: 2680.0 x 4160.0 x 2635.0 Weight: 9400 kg

This HAITIAN MA-4700 injection moulding machine was manufactured in 2011. It offers an injection capacity of 1860 grams and a powerful injection pressure of 1850 Bar. The clamping force can reach up to 470 tons, accommodating molds with a thickness range of 320 mm to 820 mm. The distance between tie bars is 1560 mm, ensuring ample space for various mold sizes. Consider the opportunity to buy this HAITIAN MA-4700 injection moulding machine. Contact us for more information.

BBA PT Piston Pump, The PT piston pump is designed for vertical and, horizontal drainage. These positive displacement pumps are, self-priming and ideal for, pumping a mixture of water and air without, any restrictions. Whats more, these pumps can, run dry without causing damage or wear, to components, , MAX capacity: 35m3/h, MAX delivery head 20mwk, , Throughput capacity: 30 m3/h, Max dirt passage: 0 mm, Max. head: 20 MWK, , = More information =, , Year of manufacture: 2006, Applicable material: Water, Empty weight: 600 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentradin ...

This JAESPA W 440 HA Metal Band Saw was manufactured in 2015. It features a saw band length of 4,900 mm and operates on 400 V / 25 A. Certified with CE standards, consider the opportunity to buy this JAESPA W 440 HA Metal Band Saw. Contact us for more information.

Dowel vending machine Koch with a very good condition Incl. window tools IV 68- IV 72- IV-86 as good as new 13,000 EURO Furniture processing is possible: minimum size 30 mm The system is available for immediate delivery PS.: Technical data on request!

Injection moulding machine Arburg 420C 1000-290 BJ 2007

This MNT 430 horizontal turning machine was manufactured in 2005. It features a maximum turning diameter and swing of 460 mm, with a turning length up to 1000 mm. Equipped with a Siemens SINUMERIK CNC control, it supports various systems for precise operations. The spindle speed can reach up to 3000 rpm, powered by a 22 kW motor. Contact us for more information about this machine.

General SKU286M326 MakeALPINE A.G./ Henco & Co. TypeATP200 / 4ATP No.unknown, manufacturer tag is missing Year of construction+/- 2006 Mounted on framecheck Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Classifier mill MaterialCeramic, Mild steel Classifier Mills GrinderMulti-wheel air classifier Mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Information LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgClassifier millsHosokawa AlpineMills > Classifier millsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld fo ...

This 4-axis MIYANO BNJ 42S lathe was manufactured in 2004, featuring dual turrets and a Fanuc 18iT control for precision turning operations. It has a bar passage capacity of 42 mm and spindle speeds up to 5000 rpm. Equipped with a LNS Hydrobar MiniSprint bar loader and both standard fixed and motorized tool holders, this machine optimizes productivity. Consider the MIYANO BNJ 42S machine we have for sale. For more information about this lathe, please reach out to us.

This 3-axis HAAS VF-4BHE vertical machining center was manufactured in 2006. It operates on 360–480 V, with a full load of 20 A and a largest load of 35 A. Ideal for high-quality milling capabilities, consider the HAAS VF-4BHE machine we have for sale. Contact us for more information.

General SKU267N238 LocationBarneveld MakeGerhard+Rauh GmbH TypeRZE counterflow column, DN900/700 No.6321 Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume4000 Ltr. Motor5.5 KW Specified Features - Extraction Capacity4000 Ltr Diameterdia. 700 mm Length10 m Max. temperature95 °C With rotorcheck Motor5.5 kW (230/400 V) With variable speed drivecheck Rotor speed88 rpm MaterialStainless steel 1.4539 (904L) Information Year of construction1996 Floorspace1,2 x 1,2 m Total height12 m Weight3000 kg ATEX compatiblecheck Technical specs Extra information-1/1 bar working pressureExtractionGerard + RauColumns > ExtractionBrand > Gerard + Rau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

This 3-axis HAAS VF-9/40HE vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 2,134 mm, Y-axis travel of 1,016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 2,134 × 914 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-9/40HE machine we have for sale. Contact us for further details.

General SKU234S120 MakeBühler Cobra 501 TypeSRK 440 No.10310050 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/690 Volt Information With switchcheck Floorspace2,1x1,5 M Total height2,9 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 × 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details.

General SKU253S172 MakeBühler AG (CH) TypeCobra 201, SKR 440 No.10194572 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 volt MaterialStainless steel Information Floorspace2,1x1,1 M Total height2,7 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Emmegi Luna 450 TU/5 Circular Metal Saw was manufactured in 2008. It features a saw blade diameter of 450 mm and a spindle diameter of 32 mm. The saw blade motor operates at 2.2 kW with a speed of 2800 rpm. It supports cutting lengths from 310 mm to 5000 mm and has a weight of 1400 kg. Dimensions are 9400x1400x1838H. Contact us for more information about this machine.

General SKU286M325 MakeALPINE A.G./ Henco & Co TypeATP200 / 4ATP No.manufacturer tag is missing Year of construction±2006 Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Classifier mill GrinderMulti-wheel air classifier mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Classifier Mills MaterialCeramic, Mild steel Information Mounted on framecheck LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgClassifier millsHosokawa AlpineMills > Classifier millsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details.

This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information.

General SKU252T386 MakeAlfa Laval LocationBarneveld TypeAVNX 4030 AT Main Features MaterialStainless steel Motor18.5 KW Specified Features - Decanter Decantercheck Screw length1485 mm Inletdia. 55 mm Liquid outletdia. 210 Solids outlet286x468 mm Motor18,5 kW Max. rotor speed4000 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4408 Information No.511.5024 Year of construction2001 With switchgearcheck Floorspace2,5x0,9 m Total height1,3 m Weight1400 kg Extra Specificationsbowl material: SS 1.4408 hood and bottom piece material: SS 1.4306 DecantersAlfa LavalCentrifuges > DecantersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

This Zoller smile 400 optical measurement machine was manufactured in 2015. It features a 24V power distribution system, a lighting module Z100-L, and a high-precision spindle SK 50 with a runout accuracy of 0.002 mm. It also includes a 17 panel PC, USB camera with integrated LED lighting, and a servo motor with encoder. Consider the opportunity to buy this Zoller smile 400 optical measurement machine. Contact us for more information.

General SKU245P359 MakeMikropul Gmbh (DE) Type9-4 SC PSR No.4461 Year of construction1984 LocationBarneveld Main Features MaterialStainless steel Surface4 m2 Specified Features - Bag filter Envelope filtercheck Filter surface4 m² Number of envelopes:9 Envelope sizesdia.120mm x1200mm Cleaning by air pulsecheck Bag filters MaterialStainless steel Information Floorspace1,2x1,0 M Total height3,1 M Weight400 KG Extra Specificationswith extra filters easy change systemBag filtersHosokawa MikropulDust separators > Bag filtersBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine.

General SKU298M407 LocationBarneveld MakeKaeser Kompressoren TypeWVC-4000 No.1002 Pressure Pressure buildup0.05 Bar Main Features Capacity61.1 m3/Min Motor11 KW Pressure0.05 Bar Specified Features - Blower Blower(1x) Capacity61,1 m3/min Motor11 KW, 400/690 Volt Inletdia. 200mm Outletdia. 200mm MaterialMild steel Information Year of construction2004 Floorspace1,5x0,55 M Total height0,5 M Weight480 KGBlowersKaeserBlowers > BlowersBrand > Kaeser What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This SCHELLING FL 430/410 panel saw was manufactured in 1997. It features a cutting length of 4200 mm, a slider of 4100 mm, and a saw blade diameter of 450 mm. The saw blade projection is 130 mm, and it can handle package heights up to 120 mm. Powered by a robust 31 kW motor, this machine offers reliable performance for your cutting needs. Contact us for more information about this machine.

General SKU234S124 MakeBühler Cobra 501 LocationBarneveld TypeSRK 440 Main Features MaterialStainless steel Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm MaterialStainless steel Information No.10.164.371 Year of constructionunknown Floorspace2,3x1,3 M Total height2,9 M Weight2600 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information.

General SKU900WP080 MakeDeltatherm (D) TypeWP 412/15 Year of construction2001 LocationBarneveld Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:Water Electric capacity12 kW With coolingcheck TemperatureMax 150 grd With pump40 ltr/min Information Extra Specificationselectrical power 12,8 kW , medium: Water, SN 7/8032Temperature control unitsDeltathermHeat exchangers > Temperature control unitsBrand > Deltatherm What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 4-axis QUICK CNC UA 481 was manufactured in 2024. It features a 2100 x 3050 x 400 mm working area, a 9 KW HSD/HSK F 63 spindle, and a double layer vacuum table with 6 zones. Equipped with a Yaskawa servo motor and two Becker pumps at 250 m3/h each, its ideal for advanced woodworking. Consider the opportunity to buy this QUICK CNC UA 481 CNC Wood Machining Centre. Contact us for more information about this machine.

General SKU234S116 MakeBühler RWK 501 TypeSRK-440 No.10226398 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia 35mm Outletdia. 35m Motor55 kW 380 Volt MaterialStainless steel Information Floorspace2,4x1,3 M Total height2,7 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine.

General SKU212T092 MakeKuehni TypeEMS 600/9 - ECR 600/4 LocationBarneveld CEcheck Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2390 Ltr. Motor1.5 KW Specified Features - Extraction Extractorcheck Capacity2390 Ltr. Diameter600 mm Length3450 mm Max. temperature100 °C With rotorcheck Getriebebau (Ex) Motor1,5 kW 220-240/380-415 Volt (EX) Rotor speed78 rpm MaterialStainless steel 1.4571 (316Ti) Information No.2776 Year of construction2009 Floorspace0,9x0,9 m Total height4,6 m Weight600 kg ATEX compatiblecheck Extra Specificationsmechanical sealExtractionKuehniColumns > ExtractionBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...

This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine.