offset printing 4 used for sale

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of Make: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with power source Hypertherm XPR300 incl. Optimix gas console 1 x drilling spindle 26 kw to 40 mm diameter, incl. 8-fold tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting program on the CNC control Availability: May 2026

hello for sale 2 units turbine in trailer Technical Specifications Model: Rolls-Royce Allison 570KA Year of manufacture: 2005 Fully overhauled: 2012 Commissioned: 2016 Operating hours since 2016: Only 81 hours Fuel type: Gas Power output: 4,400 kW Mounted on trailer: Yes Additional trailer: UPS trailer included Location: Paris, France loaded now Availability: Immediate Documentation: Complete (technical & maintenance records)

Key data: 510 mm, 250 mm, 5 kW

PANHANS 425 YOC 1993 Motor power: 5.5 kW  Rated current: 14.7 A Max. planing width: 510 mm Max. planing height: 250 mm 4-Knife Shaft Strip Planer Knife 2 feed speeds: 7 + 14 m/min. Height adjustment electrically (fine adjustment by handwheel) Altitude display via mech. Counter Link feed roller Articulated pressure beams Rubber pull-out roller (in good condition) 2 table sliding rollers Extraction connection: 160 mm incl. 2nd set of br. Planer Knife  incl. adjustment gauge Transport dimensions: WxDxH: 114 x 110.5 x 111 cm Weight: approx. 650 kg

Fully automatic stretch film packaging machine with weigher & labeler Packing Plant / Wrapper + Labeler DIGI AW-4600e Technical data 220-240V / 50-60 Hz / 1.7 kW Suitable for Food-Tainer bowls Output up to 36 packets/min Year of Make: 2014 Total weight approx. 460 kg DIGI labeling system 3/6 kg, min 20g, e=1/2g Calibrated until 31.12.2022 Sale unchecked and as a defect! Stock machine, immediately available! Purchase price incl. current VAT. A proper invoice will be issued! Condition & accessories see original pictures!

Offer 26610 Technical data : - All measurements are estimated - Working range / adjustment range horizontally approx. 3 m - Working range / adjustment range vertically approx. 3 m - Mast height approx. 5 m - Lift drive infinitely variable - Welding feed infinitely variable - Control panel with control + control cabinet + wiring - Welding source STARMATIC 1003 DC up to 1000 A - Welding mast STEITZ - UP – powder – boiler - Mot. Rail running gear for floor-mounted rails - Running rails floor-mounted approx. 25 - 30 m - Connection 400 V

diameter: 400 mm bore: 110 mm tool adaptor: Camlock D 1-8 weight: 114 kg Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 420 mm throat: 410 mm saw band length: 3150 - 3260 mm saw band width: 3-16 weight: ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used dough divider / head machine KÖNIG, type: Mini Rex 4000 - AB -in bakery condition- - Tested and cleaned - Strap in very good condition - Condition: Good, ready to use - Video on request - Number of rows: 2 rows - Output: max. 4,000 pcs./h - Weight range: 25 - 130 g - El. Connection: 1.3 kW, 3x 400 V+N, 6 A, 50 Hz Visits and test runs are possible by arrangement.

Spritzgießmaschine HUARONG HRN-400 wurde 2008 in Taiwan von HUARONG PLASTIC MACHINERY CO., LTD. gebaut. Die Maschine wird für die wirtschaftliche Produktion von Kunststoffteilen in verschiedenen Farben, Formen und Größen eingesetzt. Diese Teile werden im Spritzgussverfahren hergestellt, bei dem plastifizierter Kunststoff in eine Form eingefüllt und dann mit hoher Presskraft gepresst wird. Um die höchste Produktivität und Wiederholbarkeit der hergestellten Teile zu erreichen, verfügt die Maschine über eine Reihe zuverlässiger Lösungen. Dazu gehören unter anderem ein Präzisions-Formenspannsystem, das mit einer Kraft von 400 Tonnen arbeitet, und ein Potentiometer, das die Position der Formen genau erfasst. Die Verformung der Aufspannplatten hingegen wird durch speziell entwickelte Säulen minimiert. Ein Zentralschmiersystem schmiert kontinuierlich alle beweglichen Teile der  ...

Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible.

BBA electrically driven 6-inch dirty water pump, suitable for pumping running media., The machine is vacuum-assisted (MP50) and has a soft starter. The machine is explosion-proof and the various components are ATEX-certified., The machine is in stock and ready for immediate use., , Throughput capacity: 370 m3/h, Max dirt passage: 90 mm, Max. head: 15 MWK, Max dirt passage: 1445 rpm, , = More information =, , Year of manufacture: 2007, Empty weight: 1.160 kg, Connector size: 6 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a  ...

weight max. in kg: 3000 kg stroke: . mm fork length: . mm No.: 851211, with sideshift, control unit for drive motor defective The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A conventional universal lathe Bulmak with gap bed (gap-bed lathe) is available. Center height: 210mm, turning diameter over bed/cross slide/in gap: 440mm/230mm/620mm, distance between centers: 1000mm, spindle speed: 2000rpm, bed width: 360mm, travel X/Z: 250mm/130mm. Machine dimensions X/Y/Z: approx. 3100mm/1300mm/1400mm, weight: approx. 2500kg. The machine is partially defective. On-site inspection is possible.

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 22,440 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 06 pcs. Technical data on the volume: Pallet spaces per field: 28 pcs. Pallet spaces per row of racks: 168 pcs. Total pallet spaces: 168 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg Max. bay load: 19,000 kg Lower clearance height: 1,080 | 880 mm The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P215 Profile dimensions: 120 x 100 x 2.5 mm Incl. cross and diagonal struts, and footplates The stands are pre-assembled ( bol ...

A Canon large format plotter is available. Print resolution: 600dpi/1200dpi, min. line width: 0.06mm, print speed: 8xA1/min, roll capacity: 4, max. media capacity: 730m², paper weight: 60g-110g/m². Machine dimensions X/Y/Z: approx. 1550mm/850mm/1500mm, weight: approx. 250kg. Includes 5 tones. Documentation available. On-site inspection is possible.

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P175 Profile dimensions: 100 x 75 x 2.50 mm Incl. cross and diagonal struts, and footplates The stands are pre-assembled (screwed truss) Height: 7,400 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

CNC lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of Make: 2008 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret V12 (all places driven) Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

Bystronic Bystar 4020 Year of construction : 2008 4.4 KW in 2018 completely overhauled by Bystronic At that time, a glass overhaul was carried out and the turbine was replaced by a magnetically bearing turbine. Electrified.

A Rotox lock case milling machine with multi-spindle milling unit is available. Travel vertical/horizontal: 265mm/125mm, max. profile width: 125mm, max. profile height: 50mm, speed: 9000rpm, machine dimensions X/Y/Z: approx. 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

Alcolor with Baldwin cooling all washing facilities Autoplate CPTronic Color remote control: CPC 1-04 Extended high-pile delivery with I.R. dryer approx. 94 million prints

Recon Part Number: 350516 Cylinders 1-10 J 420 A-Version Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

1 used MINT ABA of Hundegger type SC 480 Speedcut year of construction end of 2023, available end of 2026, full equipment.. the customer receives subsidies and also wants to order another unit from above from Hundegger, so this system is now free. SUPER opportunity.. Sale as seen without warranty and guarantee, but of course fully functional. More details on your request. Please enter your name, address and email address.

MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model No.: SPL-PA 4501.15+S50 Machine Type: CNC Plasma Cutting Machine CNC Control: iMSNC Construction: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection extraction system: 400 volts Motor power extraction system: 7.5 kW Compressed Air Generation: Screw Compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: available Location: Waltenhofen, Germany Dismantling and loading by sellers included

Band saw Hammer 4400, very good condition, 1.5 kW, approx. 110 kgPrices subject to change, errors, printing and typesetting errors excepted

Rojek 410 AD planer, good condition, built in 1997, standard equipment, 3.4 kW S1, 400 kgPrices subject to change, errors, printing and typesetting errors excepted

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 400, Control panel: Stainless steel Control box, Controls, Thermomete ...

Manufacturer: Lindemann Model: Lubre 400t Year of Manufacture: 1990 Condition: good They have already done all service of the machine : - New hydraulic joystick controls for machine operation - New hydraulic oil - New hydraulic hoses and pipes - Hydraulic cylinders for rams - New cutting knives - Remote control for machine movements - New metal electrical enclosures - Find more here - / Contact us at -

Knapp angled roller conveyor accumulation 2430-510-450 RA2380 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 2430 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Roller angle: 7.6° Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 nominal voltage: 24V Engine type: Interroll EC 300 Roll division in mm: 60 Conveyor speed m / s: frei einstellbar bis 1,25m/s Jam dete ...

travel -x axis: 300 mm travel -z axis: 400 mm tool taper: VDI 40 / VDI 50 Total weight, approx.: 141 kg dimensions of the machine ca.: 1,2 x 0,8 x 0,85 m Tool Presetter ULMER - Präzisa 400 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26002 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds + 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Hydr . Metal Clamping - Coolant device - Feed – roller conveyor approx. 3000 mm - Discharge – roller conveyor with measuring stop approx. 4000 mm - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg

Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING

Strip dewoven, de-fleece machine Maja ESB 4434 V, to, derinding and skinning, with ribbon and open use, 2 speeds adjustable, new bearings and sealing rings rollers, partly new bearing gears, with operating instructions, year of construction 2006, Connection 400V, dimensions LxWxH approx. 85x100x133cm, weight approx. 280kg, good used condition, fully functional

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 220 mm dayligth: 480 mm : 140 mm/s bending speed: 0-10 mm/s : 110 mm/s total power requirement: 18,5 kW dimensions: 4500x2000x2900 mm weight: 13.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: Cybelec VisiTouch 24 stroke: 300 mm Arm length: 500 mm dayligth: 500 mm : 165 mm/s bending speed: 0 - 10 mm/s total power requirement: 32 kW weight of the machine ca.: 21.000 kg dimensions: 4850 x 2300 x 3520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4200 mm plate thickness: 14 mm pre-bending: 10 mm roll diam. toproll: 340 mm roll diam. bottom roll: 310 mm speed: - m/min Control: Davi CNC total power requirement: - kW weight of the machine ca.: 11 t dimensions of the machine ca.: 6,5 x 1,75 x 1,65 m - DAVI CNC control - pre-Bending - Hydraulic 4-roller drive - Side roll diameter: 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal band saw vertical Manufacturer: Bauer Type: VG 450 L Year of Make: 2010 Cutting range: 90° round = 450 mm 90° flat = 450 x 620 mm 45° left = 450 x 420 mm 45° right = 450 x 390 mm 30° right = 450 x 250 mm Material infeed height: 930 mm Saw blade roller Ø: 450 mm Saw blade dimensions: 4,450 x 34 x 1.5 mm Cutting speed: 35, 70 m/min. Special accessories infinitely variable Saw blade guide: deflection rollers + carbide jaws Material clamping manually via handwheel + trapezoidal spindle Saw frame feed: hydraulic cutting pressure control Material feed: manual Spraying device Mains-air: min. 2 bar designed for mitre cuts Saw motor: 2.2 kW Coolant pump: 0.1 kW Hydraulic pump: 0.37 kW Space requirement L/W/H: 2,150 x 1,400 x 2,250 mm Weight approx. 900 kg Operating instructions

ALCO Tiler ASP 400 HDI fully refurbished

Grundy Tank 400L / 90Gallon Insulated and Clad in welded Stainless Steel 50mm of insulation Bolted top lid with internal cooling coil attached Temperature probe pocket working pressure 30psi This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Dematic roller curve left 90°-500-440 IR795 RA2351 Make: Dematic Running direction: 90° left running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and imp ...

Dematic roller curve right 90°-500-440 IR795 RA2462 Make: Dematic Running direction: 90° right running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and i ...

turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 mm capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 100 mm capacity 90 degrees: flat: 210 x 170 mm capacity 45 degrees: square: 145 x 170 mm turning speeds: 2900 U/min total power requirement: 2,3 kW weight of the machine ca.: 600 Kg dimensions: 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.35 m, Overall length= 0.84 m, Overall width= 1.57 m, Net weight= 356 kg,

Type: MultiShaker 450/1600 Serial number: E050970405041 Year of construction: 2016 Width: 450 mm Length: 1800 mm Infeed height: 1350 mm Slith: 2 mm Power: 3 x 400V, 50Hz, 16A Dimensions: 1900 x 1100 x 1450 mm Weight: 860 kg

Key data: 400 mm, 375 mm, 250 mm

With CNC 432 screen control with operator guidance, with rigid angle table, operating and programming instructions. Possibly also with H&K machine cabinet, 27 tool clamping holders, 20 collets, Gressel clamping vice. The machine was used in precision mechanics and was always programmed by the same operator, so it was in good condition.

This 5-axis Mazak Integrex i-400S-2500U was manufactured in 2018, featuring Mazatrol SMOOTH X Control and a Hydrafeed MSV110 Barfeed. It offers a maximum machining diameter of ø658 mm and a length of 2,497 mm. Equipped with a milling spindle speed of 12,000 rpm and a tool storage capacity of 72 tools, this turn-mill centre is ideal for complex machining tasks. If you are looking to get high-quality turning and milling capabilities, consider the Mazak Integrex i-400S-2500U machine we have for sale. Contact us for more information.