offset printing 4 used for sale

GEA Tuchenhagen acid tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200

Shrink Wrap Shrink tunnels

BITZER screw compressors CSH9891-240Y 40 d, R134a, R404a, R407A/C/F, R507, ß, good condition.

4 pcs 5600 x 1885 x 400 mm price 10500eur/pc

Compressor Bitzer 4FE-28Y-40P

Board thickness up to 5 mm, milling width: 3/4/5/6 mm is given by milling cutter. Suitable for card-, micro- and corrugated board. Cutting depth from 0 up to 1 mm adjust by excenter. Deep processing adjust by knurled skrew. Due to separate adjusting of milling depth and deep processing, is it possible to mill the varnish-, cellophane-, aluminium- and PE-coating in a 1/100 mm range. Suitable for any folder gluer.

Compressor Bitzer 6JE-33Y-40P

Compressor Bitzer 4FE-35Y-40P

Compressor Bitzer 6J-33.2Y-40P

N E U M A S C H I N E! Bandsaw HBS 473 400V 3 HP S 1 Cutting height of 290 mm 465 mm cutting width 475mm solid wheels 3 rolls of precision roller bearings 3454mm band length Work plate, swiveling Weight: ca. 180 kg SPECIAL PRICE NET OF 950.-

Maja SA 400, ice machine, capacity: 400 kg in 24 hours, refurbished. The machine is immediately available, and can be tested in Koblenz, Germany.

Compressor Bitzer 4VES-10Y-40P

McIntyre 407 CAT Shear Designed to recover the precious metals found in Catalytic converters, JMC Cat shears also versatile enough to be used anywhere in your yard. Purpose Built McIntyre Cat shears have been purpose built for recovering precious metals from catalytic converters. The Catalytic converter is simply placed in the jaws and cut. The movement of the jaw is directly controlled by the moveable foot pedal and a V clamp holds the Cat in place during cutting. Once cut, the pinched end of the converter can be re-opened using the side bracket attached to the top jaw, allowing the contents to be poured out.

2-flügliges mixer - as new- Manufacturer: Ekato Type: DENI 480 S Serial number: 1348091-20 Working pressure: 1 bar Working temperature: 30 ° C Revolutions: 48 RPM Year of construction: 1999 Agitator was never in operation and is still there, as on the first day. Therefore in Very much good condition! New price: about 5.080,00

McIntyre 407 Shear An affordable efficient 407mm (16") blade shear with enough power and speed to handle a wide variety of cutting tasks Robust, affordable, efficient Built originally for scrapyard use, the McIntyre 407 shear is robust enough to withstand the most difficult of working environments. It is now our most popular alligator shear with more than 2000 still in daily use worldwide. The McIntyre 407 is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 407 can also be used to cut ferrous metals. Why

Operating voltage: 400 v Ma.Nr.: 41636 HEIDENHAIN positioning and control TNC 131 / 135 Complete Dokunnetation (operating instructions, technical plans) exists. Errors excepted!

DATA ON THE MACHINE Machine type: Permanent magnet - DC servo motor Manufacturer: INDRAMAT Model: MDC 10.40C / MMA-0 / S06 Condition: ready for use (used) Price 550 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MAH-1119-9 Description We offer you a used DC servo motor from the manufacturer Indramat suitable for e.g. MAHO MH700 X or Y axis Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

HBS 433 Band saw Motor: 1.5 KW / 400 V Cutting height: 270 mm Cutting width: 410 mm Roll diameter 430 mm Precision roller Guide Band length: 3345 mm Table inclination 10 °-+ 45 ° Weight: 130kg G & pieces 5154303

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

Block/SOS bag machine with flat inside handle device, Carrier bag machine, 53bb + 43ct Bag width: 14-32cm Bottom width: 6-20cm Tube length 35-70cm with fotocell for preprinted paper, 1 ply option: 2 plies option: 4 or 5 colour tail end printer

Submersible pump Manufacturer: Netzsch Type: 4NT04 Length: approx. 1,80 m Characteristics of the immersion pump -insensitive to Sandy shares in the pumped liquid -pulsation promotion -very high suction capacity The immersion pump offers you: -low life cycle costs -high pressure stability -exact dosing accuracy Advantages of the immersion pump -Operation possible at high water content in oil -Reliability for oils with high viscosity -ready to use media with high fixed material freight Submersible pump is still unused, so as new and in very good condition!

Automatic slicer Bizerba A 404, with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Automatic slicer Bizerba A 404 with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Description: Design : Casting resin transformer Design: Dry Make : SGB Built: 2010 Condition : new Rated power: 1000 KVA Overvoltage: 10 KV +- 2 x 2.5% Undervoltage: 400 V Switching group: Dd6y 5 Frequency: 50 Hz Cooling type: AN Total weight: 2410 Kg If you have any questions don't hesitate to ask. Yours sincerely / Best regards Mr. Serhan Managing Director - Owner Company M&S EXPORT Lippstadt Ostenfeldmark 17 Industrial estate on the moonlight 59557 Lippstadt Owner: M. Mousa Serhan Turnover Tax No.: DE 255543367 Phone: 02941 / 96 77 818 Fax: 02941 / 96 77 832 Mobile: 0172 / 72 653 24 Email: Transformatoren@gmx.de

Force of pressure: 150 t working width: 4300 mm clear stand width: 3600 mm stand projection: 300 mm maximum height: approx. 500/700 mm operating speed: up / down 41 - 65/10 mm / sec back gauge: 1000 mm Electr. Supply: 400 V, approx. 15 kVA kW weight: 14 t space: 4600 x 1950 x 3100 mm

Force of pressure: 400 tons of working width: 4100 mm clear stand width: 3150 mm stand projection: 330 mm Electr. Supply: 400 V, 37 kW weight: 25 tons of space: 4100 x 2300 x 3910/530 mm

Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg

Working width: 4100 mm sheet thickness: 6 mm radius: 100 mm rear gauge: 0-1000 mm power: 18.5 kW space: 4600 x 2200 x 1950 mm weight: 11000 kg

1 RAMISCH laboratory 4-roll calander type RK 46P, face roller width 300 mm, working width 250 mm, calander indicated for following processes: rolling, glaze, friction, mate, Schreiner and embossing,  4 rollers with the following distribution (top to bottom):  steel diameter 120 mm, cotton diameter 240 mm, cotton diameter 240 mm, steel diameter 120 mm, both the steel rollers are electrically heated, linear speed adjustable up to 20 m/min., pressure adjustable up to 195 N/mm = 6 tons, unwinding from roller max. 300 mm diameter, winding to roller max. 300 mm diameter, double fabric spreader, central lubrication system to the 8 roller plain bearings, all rollers are connected through tooth wheels, friction possible and adjustable between 0 and 200%, weight of the machine 2300 Kg, dimensions width 1780 mm, depth 1250 mm, height 1600 mm

Cutting length: min/max at 90 ° 330/5000 mm blade diameter: 450/500 mm kl.90°: 330 mm blade diameter cutting length: 450/500 mm Drive motor per unit: 2,2 kW Electr. Supply: 400 V, 5.2 kW Space requirements: 6760 x 1590 x 1700 mm weight: 1550 kg

Make: BITZER Type: 6G-30.2Y-40P Conveyor volume: 126.8 m3/h Speed: 1450 rpm Price on request

Immersion pump, TG 50 20/40 840, 4KW, max19m, max70m³/h, Knoll, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - The motor was tested briefly and runs very smoothly - The impeller and shaft look excellent. - It is possible that it was completely overhauled by the previous owner, but we cannot say for certain. - 4,0 KW - Hmax 19m - Qmax 1160 L / min or 70m³/h, - 400 V - 50 Hz - 2900 rpm - Immersion pump, cooling lubricant pump - Immersion depth 108 cm - approx. 100kg Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the ...

Recon and used on sale

Power: 440 kVA / 352 kW diesel engine / type: MTU / 12V183TB32 Cylinder: 12 / V Cooling: 2-circuit cooling system Generator / type: A. v. Kaick / SHASHI 80/500-4 Voltage: 400 / 231 V Frequency: 50 Hz Speed: 1500 min type: complete unit in the soundproofed 20' HC container Tank: approx. 1000 LTR. Switchgear / automatic switchgear, Symap Battery voltage: 24V Generator switch: Yes Dimensions (L X W X H): 6000 x 2340 x 2900 mm Weight: 12,000 kg

Immediately available

New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + Housing made entirely of stainless steel + complies with the strictest hygiene regulations + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 40 litre stainless steel boiler - 1x whisk for 40 litres boiler - 1x flat stirrer for 40 litres boiler - 1x kneading hook for 40 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request:  ...

New machine 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + with integrated dust/spray protection cover + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Stainless steel boiler support arms + closed planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 40 litre stainless steel boiler - 1x whisk for 40 litres boiler - 1x flat stirrer for 40 litres boiler - 1x kneading hook for 40 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 40-litre sta ...

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage Price on request

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage with switch box Price on request

Precision ball screw drive, KGT 40mm, Gewindelg 1735mm, Steinmeyer, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Precision ball screw / ball roller spindle with nut - Nominal thread diameter 40mm, pitch 10mm, - total length: 1920mm, 17kg, - ball screw length: 1735mm shaft end 1: 115mm lg - D22 x 40mm lg, thread M30 x 1,5 x 21mm lg, D30 x 54mm lg shaft end 2: 70mm lg - thread M25 x 1,5 x 20mm lg - D25 x 50mm lg Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device  ...

Air conditioning Manufacturer: Airwell Year of construction: 2010 In very good condition!

E engine durchfl. Water cooled Three-phase asynchronous motor Manufacturer: ELIN Model: MKH-435 K04 Z9Z Performance: 315kw Supply: 400 V Revolutions: 1336/min Weight: 1700kg NEW, original box, unused from old stock for further details please refer to the pictures.

Mechanical sheet metal shears of excellent quality, for the burr-free precision cutting of sheet metal up to 1.2 mm sheet thickness steel sheet/ST40 – aluminium 1.5 mm, backdrop-guided knife beam Largest cutting length 4,080 mm, cutting angle 1.5° - up to 25 cutting strokes/min, NC - controlled rear stop with 750 mm travel range, slantable for conical cuttings - automatic removal of the stop rail at sections deeper than 750 mm - with forced-controlled sheet lifting device - automatic tipping device for the sheet metal cuttings into the section collection cart, Scissor table height 800 mm - scissor table width 300 mm - Scissor table extension up to 480 mm support width, dimensions 4.75 m x 1.68 m x H 1.46 m, drive power 2.2 kW, weight approx. 1,500 kg

Bevel-helical gear units Manufacturer: Bonfiglioli Model: A 413 UH45 P80 LO E engine: Euromotori 0, 55kw MS8026 Built in 2008 NEW, unused from old stock for further details please refer to the pictures.

nursing homes, accommodation, Modules can be put together.

Make: BITZER Type: 44VCS-12.2Y-40P Tandem compressors 2 Compressors Type: 4VCS-6.2Y-40P Conveyor volume per compressor: 34.7 m3/h On metal scaffolding Price on request

Wing Mixer Wing Wheel Low Speed Mixer Propeller Agitator Propeller Mixer Xylems Flygt Banana SR Agitator used Low speed, highest efficiency Slow-running Flygt agitators are used when large amounts of liquid need to be stirred effectively and optimally during the treatment process. The result is outstanding efficiency. Manufacturer: FLYGT Type: M18-11-4AL / Banana SR agitator Propeller diameter approx. 1800 mm Wing/propeller length approx. 850 mm Wing/propeller width approx. 420 mm Diving motor Flygt 4430.010 690/400 V; 4.8/8.3 A; 50 Hz; IP68 4.0 kW; 1405 rpm Slow running submersible motor agitators Application: - Activated sludge treatment, conventional treatment, oxidation trench - Water reservoirs - Ice-free keeping - Oxygenation in lakes and ports - Biogas production tanks - Wastewater agitator Total approx. 1800 x 1300 x 600 mm Weight approx. 290  ...

Power: 450kVA / 360 KW Diesel engine (four-stroke) / type / no.: IVECO 8281 SRI 2709 / 509102 Cylinders: 8 V Cooling: water cooled Alternator / type / no.: Leroy Somer 47.1 L9 C6/4 / FJ092825/01 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: Soundproofed canopy Tank: 600 l and external fuel connection Switchgear / Starter: Automatic with no brake return / elektrical Battery voltage / capacity: 24 V / Dimensions (L X W X H): approx. 4000 x 1600 x 2200 mm