offset printing 4 used for sale

Engine Brand: IVECO, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 385 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 244 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/219422, , = More information =, , Empty weight: 1.650 kg, Type number: N67MNTF40.01 POMP 450M³/H

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Air Cooled , Engine Color: Red , Working Hours: 1041 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Power: 198 Kw, Rated Speed: 2300 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/218821, , = More information =, , Type number: 8JT POMP 473 M³/H

Engine Brand: VOLVO, Condition: USED, Nominal Power @ Nominal Rpm: 450 Kw, Bore: 144 mm, Stroke: 165 mm, Engine Capacity: 16200 cc, Qty Cylinders: 6 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Power: 320 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 400 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 577 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/volvo-twd1630g-generator-400kv a-used/310, , = More information =, , Type number: TWD1630G GENERATOR 400KVA

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1000 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1250 , Generator Hz: 60 , Generator Volts: 3300 , Generator Amps: 219 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/perkins-4012twg2-generator-125 0-kva-used/189, , = More information =, , Empty weight: 9.730 kg, Type number: 4012TWG2 Generator 1250 KVA

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 1097 Kw, Rated Speed: 1500 Rpm, Injection Type: Electronic Fuelpump (EDC) , Generator KVA: 1000 , Generator Hz: 50 , Generator Volts: 230 , Generator Amps: 2510 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/perkins-4012-twg2-generator-10 00kva-used/242, , = More information =, , Empty weight: 9.205 kg, Type number: 4012 TWG2 GENERATOR 1000KVA

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , Generator KVA: 65 , Generator Hz: 50 , Generator Volts: 230 , Generator Amps: 163.2 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-4045tfm50-generator -65kva-used/319, , = More information =, , Empty weight: 1.050 kg, Type number: 4045TFM50 GENERATOR 65KVA

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , Generator Volts: 0 , Generator Amps: 0 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-4045tf120-generator -100kva-used/34, , = More information =, , Year of construction: 1010, Empty weight: 1.280 kg, Type number: 4045TF120 GENERATOR 100KVA

Standard radiators, car radiators, oil coolers, heat exchangers, compressor radiators, hydraulic oil coolers -Manufacturer: AKG, lightweight metal oil/air cooler with filter from Atlas Copco compressor type GA 408 Pack -Type: 1613 2726/653.92 -Pressure: max. 12 bar -Dimensions: 910/400/H700 mm -Weight: 49 kg

Key data: 150 KG, 1356 mm, 2490 mm

Technical data for the shelving system: Shelving system: META Type: CLIP Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,356 mm Number of fields per row of shelves: 01 pieces of 1,300 mm each Number of levels plus ground level: 06 pcs. The scope of delivery includes: 02x Shelf stand, used Material color: blue Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm incl. base plates and gravel bar The stands are pre-assembled 2,490 mm high 640 mm deep 06x shelves, new (second choice) Soil name: MS150-III Material colour: sendz. galvanized Dimensions: 1,300 x 600 x 40 mm max. load per shelf 150 kg with evenly distributed load 04x Levelling plates, used Dimensions: 76 x 58 x 2 mm Weight|Pcs: 0,064 kg Material colour: sendz. galvanized 24x shelf rac ...

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , Generator KVA: 44 , Generator Hz: 50 , Generator Volts: 230 , Generator Amps: 110 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-4045dfm50-generator -44kva-used/414, , = More information =, , Empty weight: 955 kg, Type number: 4045DFM50 GENERATOR 44KVA

Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible.

Welding rectifier, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible.

Shaft height: 400mm, motor type: 3~ motor/ three-phase motor, connection: Δ/Y, rated voltage: 380/660V, rated current: 560/323A, frequency: 50Hz, rated power: 315kW, rated speed: 993/min, mounting arrangement: IM V1, protection: thermal winding protection, power factor: cos φ 0,89, thermal class (WKL): F, protection class: IP54, weight: 2,45t. An on-site inspection is possible, not connected to power.

electric motor, three-phase motor -Manufacture: Siemens Atlas Copco, electric motor from compressor Atlas Copco type GA 408 Pack -Type: 1RA6 183-2AB 51-Z -Power: 30 kW -Speed: 2925 rpm -Shaft: Ø 55 x 110 mm -Design: B5 -Dimensions: 625/480/H395 mm -Weight: 156 kg

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Rated Power: 342 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 400 , Generator Hz: 50 , Generator Volts: 415 , Generator Amps: 488 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/218737, , = More information =, , Type number: 80TCA GENERATOR 400KVA

Electric forklift Still RX 60-25 with tine width positioner in very neat condition: – Model RX 60-25 – Load capacity 2500 kg – Lifting height 4170 mm – Forks 2200 mm – Fork positioner KAUP 2T160BZA – Sideshift in the fork positioner – Additional hydraulics double – Hydraulics with multi-lever operation – One-pedal drive operation – Superelastic tyres – Fork carriage 6 rollers 1150 mm Form 2A – Cabin with canopy and glazing on the front and roof – Still Safety Light when reversing (Blue-Light) – Lighting system at the front and rear top – Front top left and right work lights – Reversing lights upper right – Panoramic rear-view mirror inside – Driver's seat Grammer MSG 65 – Paintwork Orange / Silver Metallic – Battery compartment for trough 234 – Battery 80V 4PzS 620 Ah – Water refill system – Charger 80V – H1 = 2775 mm mast height – H ...

Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.

This 3-axis DAEWOO PUMA 400MB was manufactured in 2002. It features a maximum machining diameter of 460 mm and a maximum machining length of 1,050 mm. The machine is equipped with a spindle speed range of 30–3,000 rpm and a tool turret with 12 stations. If you are looking to get high-quality CNC turning and milling capabilities, consider the DAEWOO PUMA 400MB machine we have for sale. Contact us for further details.

An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement.

Technical data for the shelving system: Manufacturer: Dexion Type: HI280 The scope of delivery includes: 01x Grating floor, used Material colour: hot-dip galvanised Overall width: 1,270 mm Total depth: 382 mm Clear span: approx. 340 mm f. Column depth: 400 mm Total height: 20 mm Mesh size: MW 68x35 mm Bearing rod: 20|1.80 mm Weight / piece: approx. 5.33 kg max. load per floor at Evenly distributed load: 100 kg 02x Mesh floor crossbar, used Material colour: sendzimir galvanised Clear width: approx. 1,280 mm Z-Profile: 52 x 25 mm Number of hooks: 02 pcs. Weight | Pcs.: approx. 0.84 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of de ...

- KITAGAWA 400 mm chuck - Spindle bore 110 mm - Chip conveyor - Feed rate X-Axis 20M/Min - Feed rate Z-Axis 25M/Min - Coolant and Filtration system

Horizontal turning machine manufactured in 2017. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.

Diesel Fuel Tank 4.500 Liter, 4.500 Liter Tank, UL142 Certified

LANG Technik Makro-Grip / Quick-Point Clamping System Package 2 pieces of these units available 1x LANG Makro-Grip 125 Vise Type 47205 1x LANG Quick-Point 96 Single Plate Type 45400 1x LANG Quick-Point 96 grid plate type 45763 1x LANG Quick-Point 96 substructure 100 mm type 44100 High-quality clamping technology package from LANG Technik for professional use on CNC machining centres. The system is ideal for 5-axis machining and, thanks to the modular Quick-Point zero-point clamping system, enables short set-up times and high repeatability. Pros: Precise and reproducible workpiece clamping Optimal accessibility in 5-axis machining Fast changeover thanks to quick-point zero-point technology Robust industrial design Compatible with other LANG components Condition: Used, fully functional. Normal signs of use from ongoing production. Viewing possible by arrangement.  ...

CNC turning machine WEISSER Univertor AS 90L, Maximum clamping diameter: 200 mm, Maximum workpiece diameter: 120 mm, Maximum workpiece length: 400 mm, Stroke:, X axis: 280 mm, Z-Axis: 500 mm, Siemens Sinumerik control system, 12-position tool turret, With automated loading and unloading

Engine Brand: DEUTZ, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Grey , Working Hours: 1 Hour(s), Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 38.4 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 40 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 25 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/deutz-bf4l2011-generator-40kva /366, , = More information =, , Empty weight: 595 kg, Type number: BF4L2011 GENERATOR 40KVA

Engine Brand: DEUTZ, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Grey , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 38.4 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 40 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 57.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/deutz-bf4l2011-generator-40kva -new/646, , = More information =, , Empty weight: 860 kg, Type number: BF4L2011 GENERATOR 40KVA

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 4 004 635 212.433 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/270/H145 mm -Weight: 20.1 kg

This 6-axis Takisawa TS-4000YS was manufactured in 2021. It features a maximum swing diameter of Ø 600 mm and a turning diameter of Ø 370 mm with a length of 750 mm. The machine includes a powerful 22 kW main motor and a counter spindle with a speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-4000YS turn-mill centre we have for sale. Contact us for further details.

CNC Lathe Manufacturer: Gildemeister Type: CTX 410 V3 Machine No.: 0136004581 Year of Make: 2006 Control: Siemens 840D ShopTurn Circumferential diameter: 505 mm Chuck diameter: 210 Spindle passage: 65 mm Drive power: 40/ 100%ED 21/28 KW Speed range from – to: 25-5000 Dimensions approx.: 4300x2000x1800 Weight approx.: 5600 Kg - 12-speed revolver - VDI 40 - C-axis - Powered tools 12 stations - Package bar machining - Chip conveyors - Tailstock - SMW Autoblok 210BB - Driven tool holders 3x axial - Driven tool holders 2x radial - Various other tool holders - New engine for revolver Errors excepted