offset printing 4 used for sale

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Stack electrodes, welding electrodes -Stable electrode: 4.0 x 350 -Type: FINOX 4337 AC -Weight: 5.1 kg

Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price

Stack electrode 4.0 x 350 -Type: 4370 W -Weight: 4.7 kg

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Cone size: 6 -Short cone mount for: bayonet disc -Short taper mount: Ø 106.375 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 90 mm -Weight: 51 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 35 mm -Piston rod: Ø 32 mm -Stroke: 450 mm -Quantity: 1 piece available -Dimensions: 645/55/H70 mm -Weight: 6.7 kg

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

Integrated system with 3 Bitzer compressors 4PES-10Y-40P and switch box TK compound or normal cooling compound system. Price on request.

Specifications: Passage width: 400 mm Passage height: 150 mm standard, the passage height can be changed by using additional strips Hood length: 1,700 mm Transport length: 2100 mm Transport rod spacing: every 4th rivet occupied Teflon net coating for products with a small footprint Current type: 230/400 Volt three-phase current N-PE Heating power: controlled by solid stat. relay Power: 19 kW Throughput speed: infinitely variable Color: Hammer blow aluminum No guarantee is assumed for the technical data given in the description.

The scope of delivery includes: 01x Steel beam, used Material color: white Total length: approx. 4,020 mm Box profile height: approx. 130 mm Width box profile: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 25,50 kg | Pcs. Note: - The steel beams may be slightly bent, as well as dents or others have damage. - 2 agraffes and 2 angles welded on.

Stick electrodes 2.5 x 350 -Type: P 48S -Price: per package -Number: 9 packages available -Weight per package: 4.5 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg

Compound system TEKO TPX2-4EES-4Y with Bitzer compressor 2 pcs. 4EES-4Y and switch box Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Carruthers Six-pak 46000 Six station volumetric filler Serial: 46025 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

diameter: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 piece 3-jaw power chuck make FORKARDT type 3WF 400 K15 S23 Ø 400 mm with centrifugal force compensation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carruthers Six-pak 46000 Six station volumetric filler Serial: 46026 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

format 46 x 66 cm Year of construction 2003 Flat stack feeder Vacustar 1st station: 4 folded sheets downstream knife shaft Noise insulation hood Counting device MS-Control without display Delivery date: immediately from stock Price on request. We deliver and install worldwide!

FOSHAN OCPACK PACKAGING MACHINERY OC-420AZ packaging machine was built by the Chinese brand FOSHAN OCPACK PACKAGING MACHINERY CO.,LTD. in 2021. Reliable and easy to operate machine, performs the process of automatic packaging of a wide range of products i.e. food, medicines and cosmetics into cardboard boxes with maximum dimensions of 130x80x210 mm. The items are transported by conveyor belt to a designated area, where they are stacked and pushed inside the box. A microcomputer together with a photocell controls and ensures that the packing process is performed accurately. The automatic carton box packaging machine is equipped with an OMRON HMI panel and an emergency stop button. The total weight of the machine is approx. 1300 kg. Technical specifications of the FOSHAN OCPACK PACKAGING MACHINERY OC-420AZ packaging machine - HMI panel: OMRON - maximum box dimensions (L x W x H): 1 ...

offer 12001 Specifications: - Material thickness 1.25 mm - radius 180 mm - Roller center distance 63 mm - material thickness at 40 kg/mm² strength 1.25 mm - Working speed approx. 6 + 12 m/min - Drive 400 V / 0.7 / 0.85 kW - Space requirement approx. W 550 x H 1250 x D 1000 mm - Weight approx. 120 kg - with: - E - foot button

Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg

Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes: from a CNC machining center -Width: 440 mm -Length: 400 mm -with: support ribs -with: instep index -Number: 2x plates available -Price: per piece -Weight: 74 kg

Micrometer, micrometer screw -Measuring range: 400 - 500 mm -Also other sizes: available -Weight: 8.7 kg

Description SHOOTING FRORIEP 40Dv Carousel Lathe. Modernized in 1998, among other things, a driven tool system (C-axis) was installed and the control was modernized to 840 C. Details Serial number 11330051 Year of construction 1980 Control SIEMENS electrical connection 400 V Face plate diameter 3,500 mm Workpiece height 3,000 mm Face plate over corridor 160 mm Total power requirement 71 kW Space requirement approx. 13 x 6 m Reconstruction 1998

Three-phase motor, electric motor -Power: 0.85 kW -Speed: 2800 rpm -Shaft: Ø 14 x 27 mm -Construction: B14 -Dimensions: 245/175/H140 mm -Weight: 5.8 kg

Fut preserved Gestetner 411 CD with powder machine

Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 54 -Number: 4x available -Price: per piece -Dimensions: 420/320/H225 mm -Weight: 41 kg

Electric motor, three-phase motor -Power: 1.5 kW -Speed: 710 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 420/320/H225 mm -Weight: 41 kg

HNK HCL 41x14 crankshaft CNC lathe Max. Swing Dia. Over Carriage Ø4,100mm Max. Center Distance 14,000mm Chucking Ø700~2,000 mm Steady Rest Ø510~860mm Max. Loading 160Ton

belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt with outfeed belt mobile dimensions (l x w x h) : ± 2.200 x 800 x 1.200 mm

KEB Inverter EMC Filters 180A, 0.528V UL. 480V 150A Ambient 3K3, Mat. No. 23E4T60-1001 Line H1R1A14 International shipping on request!

Control unit, control panel, control panel, control unit, keyboard, screen, control -Foot switch comes from a Trumpf punch type Sunimat 400 -Dimensions: 280/140/H150 mm -Weight: 4.4 kg

Three-phase motor, electric motor -Power: 0.09 kW -Speed: 1315 rpm -Shaft: Ø 9 x 20 mm -Construction: B14 -Flange: Ø 80 mm -Price: per piece -Number: 11x available -Dimensions: 185/108/H155 mm -Weight: 3 kg

BÖHL JUNIOR S-450 VA Verpackungsvollautomat für alle Arten von Langgut Produktabmessungen • Breite 80 – 220 mm • Höhe 50 – 100 mm • Länge ca. 2.000 mm bis 6.000 mm • Gewicht ca. 30 KG • Maximale Querschnittdiagonale 311 mm Packmaterial • PE-Stretchfoliendicke ca. 7 – 50 my (empfohlen 23 my) • Rollendurchmesser 220 mm • Rollenbreite 250 mm • Hülsendurchmesser 76 mm Leistungsbeschreibung • Wickelring D = 450 mm Innendurchmesser • Geschwindigkeit max. 20 m/min. (frequenzgeregelt) • SPS-Steuerung Siemens S7-200 mit Touchpanel • Steuerspannung 24 V DC • Anschlussspannung 3 x 400 V – 50 Hz • Leistungsaufnahme ca. 2 KW • Sicherung 25 A • Geräuschpegel 79 db • Betriebsdruck 6 bar • Luftverbrauch ca. 20 Normliter pro Zyklus Technologie • Automatisches Glattschnitt-Schneidwerk für das Verpackungsmaterial • Ve ...

composed of: Belt infeed belt: • Type: FAG 500-1500 • Width 500 mm • Barrel length 1,500 mm • Speed approx. 25m/min • Working height 850+-50 mm • Power approx. 0.5 kW Film welding machine: • Type: SWS 5020 • Machine size (LxWxH): 2103 x 15653 x 1410 mm • Max product size (lxW): unlimited x max 480 mm • Welding punch width: 500 mm • Passage height: 220 mm • Conveyor belt speed: 35m/min • Film width: max. 650/650 mm • Film diameter max 300 mm • Connection 16A connector, 3ph 380 V • Transverse welding servo motor • Longitudinal welding pneumatic • Working height 850 mm Shrink tunnel: • Type: STA-45 30 • Dimensions: 1.840L x 1080 W x 1250 H mm • Tunnel opening: 1200 L X 450 W X 300 H mm • Product size max: 1700 L x 400 W x 250 H mm • Conveyor belt speed 10-40/min • Weight 520 kg • Working height 850 mm • C ...

Pile cutter with automatic paper pressing, 48cm cutting width .1 spare knives and cutting bars

Sell a draft fan R 400 / 51-895 with a Siemens motor 1CV3182A

Asphalt paver Fortress Allat 450P. maximum width 3m. Two conveyors.

CAN SEAMER, SOMME MODEL: 434 Technical description: ¼ oval format Dimensions: 2500 × 2200 × 1900 mm

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1320 rpm -Shaft: Ø 11 x 20 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 235/170/H170 mm -Weight: 4 kg

SEPARATOR, SEPAMATIC- type: SEPA-410 Technical description: Serial number: 107315 Power supply: 2,2 Kw, 400 V, 50 Hz, 6 A Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm). Dimensions: 900 x 1100 x 1600 mm

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 920 rpm -Shaft: Ø 19 x 40 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 280/200/H210 mm -Weight: 11.8 kg

geared motor, electric motor -Power: 0.6 kW -Protection class: IP 22 -Price: per piece -Quantity: 1 available -Dimensions: 340/260/H240 mm -Weight: 7.6 kg

Label Printers Industrial Printers Thermal Transfer Direct Thermal Printers 1 x Honeywell Label Printer DMX-A-4212 New from Spare Stock 1 x Honeywell Label Printer DMX-A-6310 New from Spare Stock

Electric motor Flender ATB-Loher ANGA-315LB-42P 142/172 kW -unused - Electric motor Loher Flender - Model: ANGA-315LB-42P - 142 / 172 kW - 1480 / 2980 / min - 50 Hz - 1.21 t

Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements -Clamping angle for: workpiece clamping -T groove: 14 mm -T groove spacing: 64 mm -Threaded holes: M12 -three-sided: can be clamped -Dimensions: 560/445/H145 mm -Weight: 170 kg/piece

Clamping angle for workpiece clamping -Dimensions: W/H/L 600/405/710 mm -Thickness: 26 mm -Surface: milled -Weight: 167 kg

Diaphragm pump, centrifugal pump, water pump, chemical pump -from: scrubbing machine make Gansow -Delivery rate: 11.3 l/min -Number: 5x available -Price: per piece -Dimensions: 220/210/H120 mm -Weight: 2 kg

x-travel: 400 mm y-travel: 450 mm z-travel: 35 mm Control: Heidenhein TNC 530 table weight: 200 Kg : Random 36 fach tool adaptor: HSK E40 turning speeds: 30.000 U/min total power requirement: kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.