offset printing 4 used for sale

SUMAB R 400 Für Blöcke, Bordsteine, Pflastersteine Produktionsfläche: 1100x500mm Palettengröße: 1200x550 mm Maximale Produkthöhe: 330 mm Mindestprodukthöhe: 40 mm Produktionskapazität in 8 Stunden / 100 %: Hohlblock: 6.912 Stück (20x20x40 cm) Pflasterstein: 550-640 m2 (10x20x6 cm) SUMAB R 400 For blocks, curbstones, pavers Production area: 1100x500mm Pallet size: 1200x550 mm Maximum product height: 330 mm Minimum product height: 40 mm Production capacity in 8h / 100%: Hollow block: 6,912 pieces (20x20x40 cm) Paving stone: 550-640 m2 (10x20x6 cm)

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roll width: 410 mm -Diameter roller: 50 mm -Roll speed: 21 m/min -Drive for: slewing ring SEW-Eurodrive 0.18 kW with brake -Dimensions: Ø 870/1035 mm -Weight: 162 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Orsta, hydraulic cylinder type R1-63 / 40x1000 -Stroke: 1000 mm -Piston rod: Ø 40 mm / thread Ø24 x 16 mm -Mounting hole: Ø40 x 40 mm -Cylinder: outside Ø 72 mm -Dimensions: 1260/100 / H90 mm -Weight: 26 kg

Electric motor, three-phase motor -Electric motor: power 5.5 kW -Type: 4AM112M4Y3 -Speed: 1425 rpm -Shaft: Ø 32 x 80 mm -Construction: B5 -Dimensions: 435/300 / H330 mm -Weight: 57 kg

Bitzer Tandem Type 44DC-10.2Y, with 2 pcs compressor 4DC-5.2Y, With control box and collector

This line is an automatic filling line for bottles with Ø 38 mm wide mouth neck including aseptic filler, filling height control unit, labeling, foil shrinking, handle applicator and conveyor system used in the PET bottling for still and cold products like milk or juice.

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, 6 pieces -Tool: for closing folds -Drawing: in the photos -Dimension: 20 x 70 x 495 mm -Price / fee: complete -Length total: 2970 mm -Total weight: 31.3 kg

Cylindrical roller bearings -SKF: NU 418 -Outer diameter: 225 mm -Inside diameter: 90 mm -Width: 54 mm -Price: per piece -Number: 2 pieces -Weight: 11.9 kg/piece

New brush machine K2L-400+ with manual stroke control. The stroke of both spindles simultaneously with the adjustment of the individual spindles to each other. Suitable solution for rapid material height changes. Technical parameters Working width 400mm 2 working heads 2 x3 kW Feed speed 2-12 m/min. Suitable for brushes with a diameter of 250mm, L 400mm, d40mm. The machine is in stock and can be picked up immediately.

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 415 mm -Inside diameter: 105 mm -Hole circle: Ø 172 mm -Weight: 49 kg

Plasma hose package, welding torch, MIG/MAG torch -ESAB type: PSF 410 Cw -Hose package: water-cooled -Spring contact -Length: 3.25 m -Price: per piece -Number: 2 pieces -Weight: 3.2 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNU-32-420-PPV-A -Stroke: 420 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M10x1.25 -Quantity: 2 pieces -Price per piece -Dimensions: 590/90 / H70 mm -Weight: 1.9 kg/pc.

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

Specifications Cutting width: 3.8x50 mm Power supply: 400 V Year of construction: 1991 Price: on request the security level: P2

Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1500 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 590/690/H1080 mm -Weight: 246 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate -Width: 300 mm -Length: 420 mm -Height: 70 mm -Groove width: 14 mm -Weight: 52 kg

Interface converter, converter module, FL Comserver -Manufacturer: Phoenix Contact, FL Comserver -Type: Basic 232/422/485 Ord.-No. 23 13 478 -Price: per piece -Quantity: 3 available -Dimensions: 100/20/H110 mm -Weight: 0.1 kg/pc.

Bevel gear motor, G50BB124MHAR2C, 401r/min, 68Nm, Lenze, mint condition If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part was disassembled from a new unit that was not put into operation. - Bevel gear motor G50BB124MHAR2C, 401r/min, 68Nm, I=3,565 - Motor MDEMABS100 32C0C, 0,55KW, 1430r/min, - Bore for shaft D30mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

- Stainless steel structure - Belt length: 4000 mm - Belt width: 300 mm - With 4 feet - Without electrical control box

Servo motor, electric motor, DC motor, servo gear motor -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 45x30 BGE45CI -Voltage: 24V -Speed: 3360 rpm -Gearbox: PLG 52 i = 64:1 -Shaft: Ø 12 x 20 mm -Dimensions: 230/61/H61 mm -Weight: 1.8 kg

Bezel, stick, lynette -max. passage: Ø 450 mm -Tip height: 305 mm -Edition: ball bearings -Technical drawing: in the photos -Dimensions: 880/100/H870 mm -Weight: 169 kg

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230 V, noise level:

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 495/403 mm -Height: 20 mm -Hole circle: Ø 445/14 mm -Delivery of: steel/stainless steel cover plates possible -Number: 8x pillows available -Price: per piece -Weight: 1.5 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer diameter: 410 mm -Height: 21 mm -Delivery of: steel/stainless steel cover plates possible -Number: 32x pillows available -Price: per piece -Weight: 2.8 kg/piece

Footplate, site fence foot, barrier foot -9 pieces: TL plastic footplate -Price/fee: complete -Dimensions: 820/420/H110 mm each -Weight 27 kg/piece -Total weight: 246 kg

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg

Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Dear's Sale, used 1 engine MAK 452 COVER Brgds Hakan KUSCU +905323642509

-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm

module: Diameter: mm boring diameter: mm Sprocket cutter DIN3968 Parting 65 RO36 R1 EK 20° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connector, plug, sensor module -4-pin -Screw locking: M12 x 1 -Nominal voltage: 250 VAC/DC -Cable entry: max. 6 mm -Connection: max.0.75 mm² -Number: 60x available -Price: per piece -Minimum order: 4 pieces -Weight: 20 g

Power supply unit, converter, power supply, switching power supply -Type: PFC250-4350FM -Input: 85 - 250 V 50/60 Hz 5 A -Output: 3.3 V 40 A, 5 V 20 A, 12 V 6 A, 12 V 3 A -Number: 2x available -Price: per piece -Dimensions: 260/120/H65 mm -Weight: 1.7 kg

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, webbing, flat belt, drive belt -Width: 100 mm -Length: 4990 mm -Price: per piece -Quantity: 4 pieces -Dimensions: 200/200/H100 mm -Weight: 2.1 kg/piece

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper -Lucoma: Pressure relief valve DRK 370 x 405 mm -Dimensions: 370/405/165 mm -Weight: 5.3 kg

Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Key data: 1000 , 89 , 30

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo a ...

completely stainless steel Turn right-left double-walled (suitable for heating and cooling) Front emptying 2 motor: 2 x 3kW Safety cover Dimensions (L x W x H) : ± 1,500 x 1,200 x 1,700 mm + "Berief" Mobile feeding for 200L standard wagons

Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: NTN -Thread: diameter 32 mm -Pitch: approx. 10 mm -Thread length: 482 mm -Techn. Drawing: see photos -Dimensions: 672/93/H93 mm -Weight: 9 kg

Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm

3-spindle deep hole drill -without electrics- Year of construction 1998 / rebuilding 2014

Power converter, power supply, power supply unit, switching power supply unit, power supply unit module -Input: 100-240 V AC 50/60 Hz 6.5 A -Output: 24 V DC/20 A -Price: per piece -Number: 11 pieces -Dimensions: 295/125/H50 mm -Weight: 1.7 kg/piece

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 99 mm -Price: per piece -Number: 2 pieces -Weight: 9.7 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3 kW -Voltage: 380/660 V -Speed: 2870 rpm -Volume flow: m³/h -Connection input: Ø 310 mm -Connection output: 400 x 200 mm -Dimensions: 1000/680/H1030 mm -Weight: 254 kg

This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm

Siemens Simodrive 6SC6600-4GA00 outdated 462600.9060.00, 6sc66004ga00 Central Assembly Shipping with parcel shipping.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: 190/30/H30 mm -Weight: 0.35 kg/piece

Leutenegger (Starrag) washing box Specifications Year of construction: 2000 Bathroom capacity: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply line: 40 A Control voltage: 24 V DC Temperature max: 50° C Electric heating Heating capacity: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3/h Shipping costs on request