138,027 used machines on RESALE, but how to find them? Machine Search
The BBT 400 Woodzilla is a 360° swivel, compact, Powerful, mobile drum chipper with aggressive feed, built on truck trailer chassis. Technical data Drive: Diesel, Deutz TCD 3.6, 100 KW (136 HP), Stage 5 Feed: 320 x 500 mm Chopping drum: 400 x 500 mm, 4 knives Trunk diameter max.: 32 cm Length of feed table: 1300 mm Outrigger: 4-fold hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chippers and cranes Pendant towing eye: 40 mm Brake: Air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chippers and cranes The machine is in mint condition. Location: NRW Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.
Year of construction approx. 2014 Greenline Version - Energy Saving (IE2) Conveying equipment temperature up to +120°C Multifunctional use, e.g. for kitchen exhaust air, industrial exhaust air Double-walled housing, soundproofed (50 mm rock wool – non-combustible, DIN 4102) Inspection door simplifies maintenance work Voltage/frequency: 400 V / 3 ph / 50 Hz Power: 3670 watts Current: 6.16 Amps Speed: 2890 1/min Protection class: IP 55 Motor protection: PTC (PTC) Max. conveying device temperature: +120°C Motor Type Efficiency/Adjustable: IE2 / FU Adjustable (Greenline) Max. volume flow: 7513 m3/h Motor outside air flow complies with DIN 18869-T1: yes Sound pressure level 4m: 53 dB(A) Insulation/Insulation Housing: Double-walled with 50 mm mineral wool (non-combustible) Housing material: galvanized sheet steel Outer Dimensions: 770 x 770 x 655 mm (L x D x H) Connecti ...
The scope of delivery includes: 01x Workbench,used System substructure dimensions: approx. 1,340 x 700 mm Height of top edge worktop: approx. 938 mm Worktop dimensions: approx. 1,400 x 1,000 mm Material thickness: approx. 38 mm consisting of EACH: 02 x Workbench stand, used Manufacturer: Dexion Type: P 90 Material colour: sendz. galvanized Profile dimensions: 100 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 900 mm high 700 mm deep 04 x Workbench trusses, used Shelving system: Dexion Type Speedlock P90 Material colour: sendz. galvanized Box profile: 89 x 50 mm Truss Type: SLO089|2 Clear width: 1,140 mm 08 x Dexion safety pin, used Type: Speedlock P90 Material colour: sendz. galvanized Ø Head: 13.58 mm Ø pin: 5.92 mm Weight / piece: 0,018 kg Particleboard, second choice, used Thickness: 38 mm Di ...
Refurbished blower Werner & Pfleiderer RC 2 4260 RB Power 37 kw, 50 m³/min, 1270 mm water column Air intake 160 mm ø, GL 180° 115 mm ø blow-out, New bearings, V-belt new, With basic frame and vibration damper New engine installed (Solan )
Specifications: - Total payload driven + running unit 40000 kg - Payload per container device 20000 kg - Workpiece diameter approx. 500 - 3500 mm - Center distance of the support rollers adjustable via trapezoidal thread spindle - Roll diameter 500 mm - Roll width 150 mm - driven single-sided drive - infinitely adjustable rotation speed - Handheld remote control for re- and li.-run - Drive 400 V - Both units are built on rail chassis - Space requirements Unit approx. W 3800 x H 1150 x D 1350 mm - Platzb. with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight applied. Unit approx. 2500 kg - Weight with running unit approx. 1800 kg
Maximum force ton-force 400 Slider stroke length mm 250 Number of courses of a slider per minute 25 Maximum distance between table and slider (in lower position of slider) mm 670 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 Main electric motor power kW 40 Press overall dimensions mm - length 3410 - width 3140 - height 5930 Press weight kg 30 600
For sale is a commercial kitchen with 4 pieces of Schneider cooking kettles in V2A double-walled heated with (24KW) with a 400 liters (together 1600 liters!) and an extraction system. as well as various accessories. such as e.g. Sandwich glass board etc. New price was just under 100,000€. It has been proven that the facility was used very little. Plant immediately available from site (lead time approx. 2 weeks for dismantling and delivery) For sale is a commercial kitchen with four double-walled, 24kW Schneider stainless steel cooking kettles, each with a 400-liter capacity (1600 liters total!), and an extraction system. Also included are various accessories such as a sandwich glass worktop, etc. The original price was nearly €100,000. The system has demonstrably seen very little use. The system is available immediately from the site (lead time approx. 2 weeks for dismantling and ...
We can offer Arburg injection moulding machines, 220,270,420 etc.all goog condition.Serious buyers contact us. We have many brands, models,years machines, tell me what you need seriously!
We can offer a Krauss Maffei injection moulding machine, manufactured in 2017, short time working, like new one, serious buyer contact us. We have many brands, models,years machines, tell me what you need seriously!
Hand lever plate shears and profile steel shears Knife length 400mm Cuts sheets up to 5mm Cuts round steel up to 13mm Heavy and stable design with foldable storage table. Mounted on base More hand lever plate shears in stock, also for round steel and profiles!
Diosna spiral kneader W 240 - 3 boilers - 400kg dough - after repetition - industrial mixer
Submersible pump, TH45/470+001, Brinkmann Pumps, used Top Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - has some storage marks due to the long storage period, - The condition of the pump looks as if it has not been used, or only used briefly, or it has been completely overhauled by Brinkmann. Technical data: - 30L/min, 142m, - 240/400V 2.6KW, - Immersion depth 470mm, - Flange outer diameter 180mm, - Pitch circle diameter 160mm z=4, - 85x24x18cm, ca30kg, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods ca ...
We offer Doka Eurex 30-top 400 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 400, used - 59,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The robust and durable Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and corresponds to column classes D, B/D or C/D according to standard EN 1065. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/95623 ...
We offer Doka Eurex 20-top 400 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 20 top 400, used - 49,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The robust and durable Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and corresponds to column classes D, B/D or C/D according to standard EN 1065. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/95623 ...
Compressor Bitzer Type: 6F-40.2Y-40P Volume: 151.6 m3/h Cooling capacity: 100 kW at - 5°C/40°C, 83kW at -10°C/40°C, 42.7kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 6 Reference number: S 92 Condition: Used in good condition Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format
Key data: 3200 mm, 287 , 50
Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only
Stationary high-pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of construction: 2015 Condition: in very good used condition.
Spiral conveyor from Apollo, infeed at approx. 6.42m / discharge at approx. 1.09m, approx. 40cm wide conveyor line – used -: Ex-site price (net): only 5.950.-€, dismantled, packed and loaded! Manufacturer: Apollo Type: SPC 1500-400-A4-6T Year of Make: 2016 Width of the conveyor belt: approx. 40cm Height of the point where the conveyor system enters above: approx. 6.42m Height at the sluice: approx. 1.09m Diameter spiral: approx. 2m SPC 1500-400-A4-6T Chain length (m) 37.5m Serial No. 562044-100 230/400V / 50 Hz, 2.2 kW Speed (at Min): 40m/ min IP54 Load 6.4kg/m Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony
groove width: 3 - 90 mm drawing length: 430 mm working speed: 4 - 12 m/min slot-milling length: 400 mm return speed: 15 m/min total power requirement: 5,5 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 1,3 x 1,7 x 1,5 m • div. pull broaches and guidances The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format
Reference ID: PP-55532 Category: Label Printer Manufacturer: Nilpeter Model: FA 4250 Year Built: 2007 Color: 8 Impression: - Working Hours: - Speed: - Max. Size: 420 mm Min. Size: - Condition: Good Location: Europe Availability: Immediately Machine Description: Working width: 420 mm Number of units: 8 8 UV colour stations + hot air drying on 8th station Installed new UV drying system – GEW E2C (year 2020) Servo driven Water cooling chill rollers Printing cylinders and anilox in sleeve version Unwinding (roll max. 1000 mm) Roll splicing table Corona Lengthwise waste cutting with waste removal Table for roll-sheet cutting Software for cold foil printing Winding with pressure roller (roll max. 1000 mm) Video monitoring camera Printing film 25–300 my Automatic register Included 10 anilox rollers Included 8 sleeve print cylinders (552.45 mm) Machine in ...
Specifications: - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circulating water channel - 3 pieces T – grooves M 16 L 900 mm - side flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg
Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: Esmena Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 100 x 40 mm Truss type: GN 100x40 Agraffe: 5 HK (hook) Clear width: 4,005 mm load per pair of trusses 1,000 kg at the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.
Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1999, 2000 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
RECON Part number: 524 070 11 01 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
used
Recon Part Number: 1217 4852 (6.441.0.730.012.6) Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
Technical data for the pallet rack traverse: Shelving system: Stow Type: Pal Rack OP Included in delivery are: 01x pallet rack traverse, used Material color: blue Box profile: 100 x 50 mm Version: Head traverse 1,450 mm clear width load per pair of trusses 1,800 kg, with the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting
sheet thickness: 1.25 mm steel Roller center distance: 63 mm
used
RECON Part Number: 1216 8348 6.420.0.940.006.7 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
used
RECON Part number: 524 011 26 01 #524100554 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
Carl Zeiss Axiovert 40C Inverted Light Microscope The Carl Zeiss Axiovert 40C is a routine inverted microscope specifically designed for the study of living cells and cell cultures in biology and medicine. Due to the inverted design, the objectives are located below the stage, which allows observation in larger culture vessels such as petri dishes or microtiter plates. Technical features Optics: Equipped with the ICS system (Infinity Color-corrected System) from ZEISS for high optical performance in all contrast processes. Lighting: Equipped as standard with a 12V 35W halogen lamp for transmitted light; optionally, an HBO 50 mercury vapor lamp can be used for fluorescence applications (model CFL). Contrast Method: Supports brightfield, phase contrast, and PlasDIC. Camera connection: The Axiovert 40C model has an integrated photo port (C-mount adapter) on the front for di ...
AVIA FNE 40NC milling machine was built in 2001 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for precision machining of workpieces with a maximum weight of 400 kg. The machining process is performed in three axes by means of a reliable spindle with stepless speed adjustment. The spindle, mounted on a swivel workhead, moves in the Z axis on precision vertical guides. All this is complemented by the easy-to-use HEIDENHAIN NC control system, in which even the most advanced programmes can be created in just a few steps. The AVIA FNE toolroom milling machine weighs 1900 kg. Technical data of the AVIA FNE 40NC metal milling machine - NC controller: HEIDENHAIN TNC 310 - feed in the X/Y/Z axis: 620/420/400 mm - rapid traverse in the X/Y/Z axis: 6000/4000/4000 mm/min - feed rate adjustment: stepless - maximum workpiece weight: 400 kg - horizontal work table ...
Recon Part Number: 1217 2085 6.440.0.731.009.7 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Recon Part Number: 1215 2686 Dextrorotatory Seawater Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
Centrifugal pump with magnetic coupling.
maximum number of results exceeded
please refine your search
