offset f 4 used for sale

Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg

Bus 32 slot

CPU/PC

grinding length: 4000 mm grinding width: 1100 mm workpiece height: 1100 mm total power requirement: kW weight of the machine ca.: 21 t dimensions of the machine ca.: m Modernisierte Präzisions-Flach-und Führungsbahnschleifmaschine aus Überholungsbetrieb. Geschliffen wurden unter anderem Betten für neue KERN Drehmaschinen. -Digitalanzeigen nachgerüstet -Umbau auf Kugelrollspindeln in der Querachse -Schleifspindel für Umfangsschliff -schwenkbare Schleifspindel für Untergriffe -Originalschabbild in der Längsachse -Elektrik erneuert -Aufspannfläche 4300 x 1500 mm Bei Nutzung einer Grube können wesentlich höhere Werkstücke geschliffen werden! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximum force ton-force 400 Slider stroke length mm 400 Slider strokes per minute 25 Maximum distance between table and slider (in lower position of slider) mm 470 Size of adjustment of distance between down-stamp a plate and slider mm 160 Table overall dimensions: mm ·from front to rear 1000 ·from left to right 1000 Slider overall dimensions: mm ·from front to rear 800 Main electric motor power kW 40 Press overall dimensions mm ·length 3470 ·width 3140 ·height 5940 Press weight kg 32600

Used boiling kettle BASTRA, 400 L - Heating type: Electricity - With separate MC 30 control - Boiler capacity: 400 litres The unit has been serviced annually and is in good condition. More pictures and information on request. Visits and test runs are possible by arrangement.

Control Heidenhain TNC620 Travel X/Y/Z [mm] 4100/420/300 Tool pick-up SK40 General: Designation Autom. Profile Machining Center AP-B 4000 Machining length 4,000 mm Travel X/Y/Z 4,100 / 420 / 300 mm Machine hood: Machine hood can be opened pneumatically upwards Operation: Operating terminal can be moved over the length of the machine Control: CNC control Heidenhain TNC 620 Additional control: Heidenhain handwheel HR130 Table specification: T-groove strips size 16, mounted longitudinally to the X-axis Bearing surface: 4,200 x 420 mm Spindle: Engine power: 14 KW S1/19 kW S6 Engine cooling: water with additive Speed range: 100 to 14000 rpm Torque: 74 Nm S1 / 100 Nm S6 Drilling capacity in St 60/Alu: 25 mm/30 mm Thread in St 60/Alu: M20/M30 Tool magazine: Tool holder: SK 40 Tool clamping system: Spring package pull-in force 9 KN Version: 12-fold disc magazine Cha ...

Pelletizing Mixing Conditioner Pellet Mill Amandus Kahl Diameter 400 mm, length 2500 mm, stainless steel, as good as new

Hydraulic cylinder for ATLAS loader crane Stroke 750 mm Piston rod 125 mm Outer diameter cylinder tube 235 mm Piston diameter approx. 200 mm Length retracted center - center bolt 1,100 mm Bolt diameter cylinder tube 80 mm Width of the mount 245 mm Bolt diameter 100 mm Both bolt mounts with plain bearings Spare part number original Atlas 4189526 Width of the piston rod holder 130 mm Weight approx. 330 kg / piece Original price approx. € 9,500,-- -New- - 2 pieces in stock - price per piece -

x-travel: 400 mm y-travel: 250 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTec ...

Carbide coating machine, carbide coating device -Manufacturer: Carbumatic, hard metal coating machine -Type: unfortunately without a type designation -Voltage: 3 x 220-380 V / 50 Hz -Power: 0.4 kWA -Transport dimensions: 470/470/H380 mm -Weight: 49 kg/piece

roll diameter: 420 mm throat: 410 mm saw band length: 3150 - 3260 mm saw band width: 3-16 weight: ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Maximum pressure: 45 tons Year of Make: 2017 Pressing force: 6.9 kg/cm² Number of bindings: 3 Channel cross-section: 900 × 720 × 600 - 1200 mm Dimensions of the tailgate: 820 × 1250 mm Bale weight: 250 - 400 kg Weight: approx. 7 t Power connection: 400 V Bale tying: automatic Theoretical throughput 174 m3/hour Theoretical throughput to density 20 kg/m - 3.48 tons/hour Theoretical flow rate to density 50 kg/m - 8.7 tons/hour If you have any questions, please call us: +48 696 072 985

Key data: 100 KG, 1000 mm, 2500 mm

Shelving system – approx. 850 uprights / 5,000 shelves – TOP condition (2017) For sale is an extensive shelving system built in 2017 in very good condition. Ideal for warehouses, logistics, spare parts warehouses or order picking. Facts & Figures: System: Shelving (plug-in system) Year of Make: 2017 Total scope: approx. 850 stands approx. 5,000 shelves Dimensions per field: Height: 2.50 m Width: 1.00 m Depth: 0.40 m Load capacity: approx. 100 kg per shelf Condition: used, well maintained, fully functional Special features: Ideal for spare parts warehouses / small parts warehouses Quick assembly and disassembly (plug-in system) Very large total quantity – also suitable for complete storage solutions Uniform system → perfect for structured warehousing Availability: From 01.08.2026 Ready for collection / Dismantled / Packed for dispatch Location: ...

Conveyor belt rollers - transport rollers 14 pieces of conveyor belt rollers Steel pipe - welded - coated - red Diameter 80 mm Roll length 460 mm Installation length 460 mm Axle length 490 mm Wrench size 15 mm Weight approx. 5.3 kg -Unit price-

Drying chamber Mühlböck Already dismantled and stored in a dry place, ready for collection Type ZLSM -4x1.20-3x1.20-04.72 Year of construction 2003 With control Interior dimensions gross 7.40 x 4.55 x H 4.25 meters Gross stacking capacity 73 m³ Stacking depth 5 x 1.20 m + 4 x 0.10 m Stacking height 3 x 1.20 m + 3 x 0.10 m + 0.30 m Interior length 2 x 2.10 m + 0.52 m With ventilation via false ceiling 3 fans each 3 kW 10 measuring points With frequency converter for connection to an external hot water heating system or hot water pipe Heating capacity 223 kW Water temperature 85 °C Water volume 14 m³/h Voltage 230/400 Volt Total connected load 12 kW Control Program MB 8000 PC Remote control via modem via RS485 connection Drying assistant Danfoss VLT 6000 HVAC Variable Frequency Drive Clear door height 4200 mm Clear door width 4560 mm External dimensions 770 ...

Builder: WILLIBALD Model: MZA 4600 Engine: MAN 460 HP Data: L. 10.700 x W. 2.500 mm x H. 3.800 mm Year: 2003 Operative Hours: 7.750 h Hourly Production: 160 m³/h Shredding System: 48 HAMMER Rotor Data: D. 1.000 mm Fuel Tank: 450 L Weight: 16.000 kg NOT OVERHAULED !

Machine type: MIG/MAG welding machine Make ESAB Type LAN 400 Connection voltage 3 x 400 volts Adjustment range 45 – 400 amps Duty cycle 60% ED at 400 amps 80% ED at 355 amps 100% ED at 315 amps Current setting 40 switching levels 3 chokes for the ground cable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feeder 4-roller drive Fuse 20 Ampere Dimensions L x W x H 900 x 700 x 990 mm Weight 192 kg Age approx. 15 years Condition workshop tested, good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 Piece Instruction Manual Warranty: 6 months from the date of delivery List factory price from stock €6,900.00 + VAT Pr ...

Transport length: 1000 mm band width: 400 mm dayligth: 600 mm width: 570 mm 0: 1340 mm total power requirement: kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

air flow quantity: . m³/h suction power: . kPa power capacity: 2,2 kW Sweat extractionThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm Control: Heidenhain type: TNC 355 table surface area: 800x500 mm universal head: : spindle taper ISO: 40 total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 500 mm turning length: 1100 mm control: Pfillips 432 turning diameter over slide rest: 420 mm spindle turning speed range: 3000 U/min spindle passage: 82 mm Tool changer: 12 tool taper: VDI 40 total power requirement: kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 8000 mm table width: 2500 mm burner heads: 1 control: Selectron CNC 96 output: 4 kw total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4000 mm plate thickness: 6 mm distance between columns: 4100 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mm saw band length: 0 mm cutting width: 0 mm total power requirement: kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length in total: 3200 mm band width: 270 mm conveying height: 0: 2500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 3 m speed of p.t.o. shaft: . U/min numbers of tine holder: . 0 Tooth pack roller, cardan shaft, roller, treble The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring range X-axis: . mm measuring range Y-axis: . mm Table dimensions: . mm tool diameter: . mm digital readout: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 6000 mm table width: 2500 mm burner heads: 1 z-axis: 210 mm Table load: 2600 kg total power requirement: 3 kW weight of the machine ca.: t dimensions of the machine ca.: m capacitive tactile sensing changing table Nachtaktmöglichkeit filter system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1000 kg fork length: 800 mm stroke height: 2500 mm total power requirement: kW weight of the machine ca.: 0,987 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 t chamfer lenght: 4000 mm distance between columns: 3500 mm Control: CNC type: BC 25 Graphic throat: 400 mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4600 mm floor-plate width: 1620 mm floor-plate height: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mm throat: 390 mm workpiece height: 240 mm saw band length: 2980 mm table surface area: 500x600 mm weight of the machine ca.: 350 kg dimensions of the machine ca.: 650x1100x1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mm coil weight: 250 kg coil internal dia.: Ø 290-550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.