offset f 4 used for sale

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Manufacturer: WMW, collets, 12 pieces, with plastic box -Sizes: Ø 3-18 mm, see photos -Sale/Price: complete -Box dimensions: 260/330/H80 mm -Weight: 2.2 kg

Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet -Distribution box: made of VA -Dimensions: 410 x 400 mm -Depth: 165 mm -Price: per piece -Number: 2 pieces -Weight: 10.5 kg/piece

gauge block -Manufacturer: Hommel, gauge block no: 42161 -Handover: as is as seen -Measuring range: 0.2 to 0.9 mm, 0.1 missing -Dimension box: 65/70/H45 mm -Weight: 0.2 kg

Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain

Shrink tunnel BVM SC 4030 SD; good condition; cleaned and tested; new chains and sprockets in 2022; Passage width 400mm; Passage height 300mm; Speed max. 14m/min.; Double chamber. Shrink tunnel BVM SC 4030 SD; good condition; cleaned and checked; in 2022 new chain and chain wheels; working width 400mm; working hight 300mm; spedd up to 14m/min.; double unit.

Circuit breakers, motor protection switches, star-delta switches, reversing switches -Siemens: Type 3RV1021-4CA15 -Dimensions: 100/50/H100 mm -Weight: 0.4 kg

clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 4200 kN injection volume: 1212 /292 cm³ screw diameter: 70 /15 mm platen size: 1200 x 1100 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic i ...

clamping force: 800 kN injection volume: 106 / 42 cm³ screw diameter: 30 / 22 mm platen size: 600 x 600 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for th ...

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 450 mm -Length extended: 940 mm -Width: 13 mm -Height: 54 mm -Price: per pair (left right) -Number: 4x pairs available -Weight: 1.95 kg

We sell a baguette system of the company JAC type BA 402 incl. baguette long roller. Outdated! As good as new

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Recording: 25 mm -Drawing: in the photos -Dimension: 40 x 130 mm -Length: 495 mm -Weight: 12.5 kg

Printing machine Sakurai 466 SD+C Printing machine Sakurai 466 SD+C 4 colors + varnish automatic washes 2007, installation 2008 in 2014 full service. 53 million impressions

Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door -Side walls pair -Price: complete -Dimensions each: 1395/460/H15 mm -Total weight: 16 kg

Press 400x500 make ZDA Type 100660 manualy operated electrical heated plates Clamping force 1540 kN

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 450 mm -Piston rod: M20 x 1.5 -Air inlet and outlet: adjustable -Dimensions: 680/115/H115 mm -Weight: 8.1 kg

Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900

Country of origin: Italy Saw blade Ø mm: 425 Weight approx. kg: 900

PLC control, digital input, digital input -Manufacturer: SIEMENS -Type: Simatic S7 6ES7 421-1BL00-0AA0 -Dimensions: 25/210/H290 mm -Weight: 0.81 kg

Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900

Machine vice, stable vice, milling machine vice, modular vice -Manufacturer: Gerardi, Modular Vice -Jaw width: 195 mm -Back height: 60 mm -Clamping range: 450 mm -Dimensions: 695/195/H130 mm -Weight: 70 kg

Steel pipes, flushing pipes -Diameter: 1010 mm -Wall thickness: 10 mm -Length 4,800 mm -Weight: 253.5 kg/m

Steel pipe, flush pipe -Diameter: 1020mm -Wall thickness: 14 mm -Length: 5,400 mm with arch -Weight: 352 kg/m

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment Stable 50 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring blade with 1 ...

Press for paper or plastic Pressing pressure 5 tons 400 V 16 A Length 80 cm Width 80 cm Height 2 m

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Siemens, braking resistor -Type: 6SE6400-4BD16-5CA0 -Power: 13 kW -Dimensions: 185/185/H285 mm -Weight: 4.0 kg

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 690/400 V 50 Hz 150/1 A 0-150 kW -Number: 4x devices available -Price: per piece -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece

Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170

Dorit VV3-450 vacuum tumbler Serial: 941000323 Stainless, 450l vacuum tumbler, variable speed drum, with manual, with vacuum pump, 3Ph

used thermoforming machine TYPE Powerpak NT 420 year 2011 for sale Machine was taken out of production - ran to the last. Foil width 420 VZ 590 mm Price on request

Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 120 mm -Price: per piece -Number: 2 pieces -Weight: 13 kg

Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: from automatic band saw Behringer HBP -Piston rod: Ø 22 mm -Stroke: 445 mm -Admission piston rod: M12 -Dimensions: 605/100/H85 mm -Weight: 8.7 kg

Förderbaänder 16 A 380 V Slow runners Length 90 cm Width 15 cm Height 15 cm

Diesel engine 2.19 litres 4 cylinders 35 KW at 3000 rpm E - Gas integrated in pump Weight 205 kg Complete engine Control unit wiring harness Manifold fan Data

Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 455 mm -Flange: Ø 513 mm / bolt circle Ø 486 mm -Hose length: 145 mm -Weight: 3 kg

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 400 mm -Flange: Ø 463 mm / bolt circle Ø 438 mm -Hose length: 155 mm -Weight: 2,6 kg

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, webbing, flat belt, drive belt -Width: 50 mm -Length: 4620 mm -Price: per piece -Quantity: 12 pieces -Dimensions: 260/210/H50 mm -Weight: 1.7 kg/piece

Kitzinger crate dishwasher / instantaneous dishwasher - Type: Contino 400NDB1 - Year of construction: 2007 - Bandwidth approx. 70cm - Height entrance: 53cm - Total length: 685cm

Tank barrel Jödden 450 litres Complete unit with 12 V electric motor, battery terminals, nozzle Length 1.20 m Width 0.80 m Height 0.96 m Weight 270 kg Forklift tabs

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roll width: 410 mm -Diameter roller: 50 mm -Roll speed: 21 m/min -Drive for: slewing ring SEW-Eurodrive 0.18 kW with brake -Dimensions: Ø 870/1035 mm -Weight: 162 kg

Nibbel, stamping and forming center with C frame (C – Frame stress-free annealed before mechanical processing – 15-year warranty on freedom from cracking) All with one machine: Nibbling – Stamping – Forming – Embossing – Tapping – Marking – Deburring Servo-electric punch head drive - up to 950 strokes per minute, adjustable depending on the material feed speed. Maximum punching force 300 kN Maximum sheet thickness 6.5 mm Largest workpiece weight 200 kg Machining area 1,500 mm x 4,000 mm (with repositioning up to 8,000 mm) Punching head with FANUC® drive - Programmable: - Punching stroke - Punching depth - Punching speed and - Stamping tool acceleration Tool magazine for 15 pieces up to optionally 150 pieces indexable tools Indexing accuracy 0.01° On request, the machine can be supplied with a TRUMPF® tool system Patented vertical tool magazine ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Orsta, hydraulic cylinder type R1-63 / 40x1000 -Stroke: 1000 mm -Piston rod: Ø 40 mm / thread Ø24 x 16 mm -Mounting hole: Ø40 x 40 mm -Cylinder: outside Ø 72 mm -Dimensions: 1260/100 / H90 mm -Weight: 26 kg

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C13TE2F Engine No.: 284948 Power: 377 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L 1 D - F 41 Gene. No.: N 22J425396 Generator power: 400 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 600 Dimensions of the power unit: Width approx. mm: 1.620 Height approx. mm: 2.295 L ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm ...

Electric motor, three-phase motor -Electric motor: power 5.5 kW -Type: 4AM112M4Y3 -Speed: 1425 rpm -Shaft: Ø 32 x 80 mm -Construction: B5 -Dimensions: 435/300 / H330 mm -Weight: 57 kg

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Min. 90x130mm, Max. 320x480mm, Capacity: 14000 Cycles/Hour, 6 Feeder Stations, 3x DVU 400 Vertical Feeder, 3x DHU 400 Feeders, 1x CHU 450 Cover Feeder, Stiching Unit ST 400 with 2 Stiching Heads, Three Knife Trimmer TR400 with Stacker Delivery