offset f 4 used for sale

grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Centrifugal pump with magnetic coupling.

Used- Alfa Laval BRPX-417-SFV-31CGL-50 Desludger Disc Centrifuge. 316 Stainless steel (product contact areas), maximum bowl speed 4180 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, sludge cyclone, belt drive configuration, drive motor

Printing plate punch hatchet; good condition; Max. Plate width 205cm; Perforation 1200/780/425mm Autoplate; 1200 and 425mm can be parked. Plate punch hatchet; good condition; max.plate width 205cm; punch 1200/780/425mm autoplate; 1200 and 425mm can be suppressible.

Stanko Ø 400 mm

Output 615 HP Speed 2300 rpm Type of cooling water Number of cylinders 12 With ZF BW160 Type Gear box

Make Kallfass Model Universa 400 NT Year 2000 Working width 400 mm x unlimted Min. Product length 100 mm Product length Unlimted Passage height 200 mm Capacity up to 60 cycles per minute

AIR LIQUIDE CB MATIC SM 42X43 column and boom was manufactured in 2016 in France by Air Liquide Welding (now Lincoln Electric). The machine, designed for precision circumferential and longitudinal welding, is the perfect solution for companies specialising in the manufacture of, among others, steel structures, pipelines, tanks and wind turbine towers. The welding process is performed fully automatically by means of a welding heads system, which enables the welding of two welds simultaneously on tubes with a maximum diameter of 4000 mm and I-beams with maximum dimensions of 3000 x 800 mm. The use of this solution significantly reduces production time, while maintaining high precision and efficiency at the same time. The CB MATIC SM 42X43 welding boom on offer has a tube welding head for submerged arc welding (SAW) with a range of safety systems, i.e. laser pointers, sensors and a visio ...

Machine Details Warehouse number 1105-03525 Machine type tool milling machine - Universal SIA brand Type 470 Year of construction 2001 Control type CNC Control ANILAM 53000MK Storage location FRANCE Country of origin italy Delivery time immediately Freight base from location Technical details x-travel 750 mm y-travel 450 mm z-travel 500 mm Control ANILAM 53000MK Speed range - spindle 4500 rpm Drive power - Milling spindle 7.5 kW Feed - Fine adjustment 5 ~ 1000 mm/min Rapid traverse X-axis 15 m/min Rapid traverse Z-axis 15 m/min Rapid traverse Y-axis 20 m/min Total power requirement 20 kW Machine weight approx. 3 t Space requirement approx. 3.2 x 2.1 x 2.5 m Accessories Coolant device Information Tool milling machine - Universal WITH ANILAM 5300 MK CNC WITH NEIHGBARER HEAD TABLE 1050 X 500 MM

Mechanized table. Sizes: 4500x1220x360mm. Screws for levelling. T slots of 60x35mm. Posibility of sell with a sliding radial drill.

For sale is a homogenizing plant Koruma V160/400 for the production of ketchup / mayonnaise, etc.

Semitrailer tractor, manufacturer Renault Trucks, YOC 2005, Hbz. Premium, zul. total mass 18000 kg, Displacement in cm³ 10837, Diesel, 522'tkm, IR 2006

High-quality PLC – controlled automatic 90° under-table – straight-cut circular saw machine, for the rational cutting of profiles made of aluminium – non-ferrous metals – plastics – wood and other soft materials Smallest possible section length 5 mm Largest stroke of the feed clamping stick 620 mm (feed length unlimited) Infinitely adjustable feed speed Feed accuracy +/- 0.2 mm Horizontal and vertical material tension Largest saw blade diameter 450 mm Cutting area - - 300 mm x H 50 mm - 260 mm x H 98 mm - 240 mm x H 100 mm (see the figure with the section diagram) Saw blade speed 2,800 rpm Saw blade drive power 2.2 kW Dimensions approx. 1.5 x 0.9 m x H 1.36 m Weight approx. 440 kg

Earth auger 450 mm for Jasen HBG-2000

Earth auger 450 mm for Jasen HBG-2000

Toyota, Forklift Diesel BJ 2018 Toyota 40-8FD40N , 4.5 to / 4500 kg Payload 1.Hand, bought from us New, available now just look at it on site Full view duplex mast 4000mm, with lateral shift and fork positioner, Manufacturer Meyer, forks/tine length 1200mm approx. 11,500 BH / operating hours, 408FD40N10563 Year of manufacture 2018 Comfort cab, heating Mini lever for quick and easy operation, Switch on the left of the steering column for changing direction of travel On-board computer including load weight display Comfortable Grammer seat wide fenders and 300mm wide pneumatic tires also suitable Price VHB Diesel forklift type 40-8FD40N with SAS system for active stability Basic load capacity 4500 kg Load center 500 mm Mast type full clearance duplex Lifting height approx. 4000 mm Overall height approx. 2990 mm Free ...

DH Robotics PGHL-400-80 Heavy Duty Large Stroke Electric Parallel Gripper with Brake Gripping force (per jaw): 140-400N Stroke: 80mm Recommended workpiece weight: 8kg Open/close times: 1.0s/1.1s Repeatability (position): ± 0.02mm Weight: 2.2kg Driving Style: Precise Planetary Gearbox + T-Shaped Lead Screw + Rack and Pinion Size: 194mm x 73mm x 70mm Communication interface: Standard: Modbus RTU (RS485), digital I/O. Optional: TCP/IP, USB2.0, CAN2.0A, PROFINET, EtherCAT. Running noise: < 60dB Rated Voltage: 24V DC ± 10% Rated Current: 1.0A Peak Current: 3.0A IP Class: IP40 Recommended environment: 0~40°C, below 85% relative humidity New

Rühle Tumbler MGR 400, with vacuum, container size 400 liters, filling max. 300 liters, intelligent touch PC control, direct cooling by powerful cooling unit, infinitely variable arm drive allows up to 25 revolutions per minute, feeding for loading and unloading

-Thermal oil magnetic pump with motor -Pump manufacturer Sterling Fluid Systems Model: ZTTZ 40160 / AP 1EO 1B 2 Engine see pictures

Core diam.: 230 mm // Material Type: Cardboard, pvc, pp , pe and hdpe cores

Operating hours: 600h Specifications: Travel in X/Y/Z: 450 / 350 / 400 mm Distance from spindle nose table: 230 - 630 mm (horizontal milling spindle) Rapid traverse speed X/Y/Z: 5000 / 5000 / 5000 mm/min Working feed X/Y/Z: 10 - 2000 mm/min infinitely variable Max. feed force in X/Y/Z: 10 / 10 / 15 kN Clamping surface: 800 x 400 mm (rigid angle table) Max. table load: 30 kg (rigid angle table) Vertical milling head: Speed range: 10 - 5000 1/min Power: 10 kW Dimensions (LxWxH), approx.: 1980 x 2030 x 1990 mm Weight, approx.: 2270kg Equipment: - Swivel control panel - Shafts and gears hardened and ground - Digital display Sinumerik 828D - Clockwise / counterclockwise rotation of the main spindle - Linear guides - Four-bearing milling spindle radial/axial - All pinch points eliminated by covers - Main motor with spindle brake

Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW

Specifications Cutting width: 3.8 x 50 mm Year of construction: 1997 Power supply: 400 V/ 4 kW Price: on request the safety step: DIN 66399 O-2/P-3/T-3/E-2/

Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

PART NUMBER 7794 SPECIFICATIONS - inlet width 530mm - inlet height 200mm - shaft diameter 370mm - shaft width 510mm - knife length 510mm - number of knives 2pcs - autorever – adjustable - sieve dimensions 50x50mm - Bottom geared pulling shaft 1.5kW - Toothed pulling shaft from above 1.5kW - main motor power 30kW - vibroline loading table / vibroline length 3900mm - vibroline width 500mm 1.5kW - Receiving conveyor belt length 5000mm - tape width 380mm - hopper with chute for sprues 2500x3020x2200mm - Platform 4650x750x1770mm - Dimensions of the machine with conveyor belt and vibroline length/width/height 8900x1200x2550mm - weight about 6000kg ADVANTAGES – adjustable autorever – with vibroline 3900mm – with conveyor belt 5000mm – German production – very good condition – used chipper Net price: 98900 PLN Net price: 23548 EUR depending on the pr ...

The cross-welding stamp of the packaging machine is closed by a servo motor and is infinitely variable. The width of the infeed belt is infinitely adjustable via a hand crank, which allows perfect, simple and uncomplicated adjustment of the product width. The parameters are entered via a modern, easy-to-use touch screen. The flow length is controlled photoelectrically, so that different package lengths can be packed one after the other and one after the other. The machine is technically designed for very tight, perfect shrink-wrapping of the products, so that optimal packaging results are achieved in any case. The machine works with an automatic film feeder, it is possible to work with different transport speeds. Longitudinal and transverse welding are permanently heated and easy to control via the touch screen. Product Dimensions: Length: min. 50 mm, max. endless Width: min.  ...

see performance data on photo with data

Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

table diameter: 400 mm table load: ? t table height: 140 mm total power requirement: kW weight of the machine ca.: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Manufacturer: Genkinger Model No.: 44141627 Year of manufacture: 2023 Number of pieces: 4 pieces Condition: unused / mint condition Original price per unit: 90.000 € net Application: Internal transport on flat, paved road Overall size: approx. 16000 × 3000 × 3800 mm Loading area: 2× each 7200 × 2700 mm, height 2600 mm Loading height: approx. 1050 mm Payload: 15 t at 20 km/h with a uniform surface load Note: Point or strip loads are only permissible after consultation Covering: Loading area over the entire surface with screen printing plate Chassis: both axles steered Tyres: Super-Elastik 300-15, approx. 811 × 255 mm Wheel bearings: tapered roller bearings, permanent grease lubrication Suspension: Steel leaf springs Wheel chock: double-acting Steering: 4-wheel kingpin steering Drawbar: elevatable, removable, reversible front/rear Suspension height: appro ...

An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Closed metal energy chain, S1250.171-RM-300-St-4000, Kabelschlepp, mint condition Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part comes from a spare parts warehouse at a manufacturing plant, has never been used, is new and has only very minor signs of storage. Metal energy chain, energy guide, S1250.171-RM-300-St-4000, cable carrier, as good as new, Closed, heavy-duty design Includes 2 connecting parts Total length measured approx. 4300 mm, outer width 195 mm, web width 171 mm, 32 links, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for dire ...

9 Colors Age : 2007 Complete rail system Unwinder 1 meter roll diameter Splice detector Web breaking detectors Teknek cleaning system Corona Antistatic system Ink Pumps ; 1 Knife cutting unit : 3 knifes 6 printheads with IST UV units 9 Sensotec control register system Rotary diecut ( K1B Gap Master) AVT inspection system Rewinder compatible between both presses, need to choose Cold Foil Unit ( Unwinder+Rewinder) compatible between both presses Cold Foil pressure cilinder : 2 Cold foil small cilinder : 2 Screen Printhead Gen I : 2 available for both presses, need to choose Screen Printhead Gen II : 2 available for both presses, need to choose Screen Printhead Gen III : 2 available for both presses, need to choose Mounting Device : 2 available for both presses, need to choose More ink chamber : 2 available for both presses, need to choose

Inlet size: 400 x 250 mm - With electrical motor

Size: 400 x 1.540 x 110 mm - 9 Rolls

Axial fan, W4D450-DO14-02, 0,5KW, 400V, Ebm-papst, new -40% Please note: Original Ziehl Abegg product and not a replica from ……. Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, have never been used and are completely new. Flange size 577 x 577 mm D 450 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

; Gross weight [kg]: 520; Engine: Yanmar 4TNV88-22G; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 60

Rated current (A): 4000, Poles: 4; Gross weight [kg]: 99; Accessories: Multiple breakers in stock!, NEW/UNUSED

; Gross weight [kg]: 4879; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 842

; Gross weight [kg]: 11000; Accessories: 40FT HC used Genset Container , ex FG Wilson P1650-E3, Inside dimensions: 8820x2200x2600 )LxWxH in mm)

; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container

Key data: 762 mm, 460 mm, 460 mm

Vertical machining center Okuma MB-46UAE Year of Make: 2004 Control OSP U100M Machinery ▪ Spindle – speed 8000 rpm. ▪ High-speed machining (Hi-Cut) ▪ Spindle load monitor (load monitoring) ▪ Thread milling (Herical-Cut) ▪ Workpiece zero points 50 pieces ▪ 200 Tool Corrections ▪ Manuals available (documentation) ▪ Tool changer with 32 positions ▪ Internal coolant supply Technical details ▪ Travel X-axis (column right-left): 762 mm ▪ Travel Z-axis: (table forward-backward): 460 mm ▪ Y-axis travel (spindle up-down): 460 mm ▪ Distance table surface to spindle nose: 150~610 mm Table ▪ Table size: 1000 x 460 mm ▪ Distance from the floor to the table surface: 800 mm ▪ Max. load capacity: 700 kg Spindle ▪ Spindle speed: 8,000 rpm ▪ Number of gears: infinitely variable ▪ Front bearing diameter: 70 mm ▪ Spindle: 11/7.5 kW � ...

; Power [PS]: 2039; Gross weight [kg]: 20560; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 2300; Engine: C9.3B; Accessories: Tanker, Battery, Control Panel, Including battery charger and coolant heater

; Gross weight [kg]: 2849; Engine: Caterpillar C9.3B; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 721

; Gross weight [kg]: 4667; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 842