offset f 4 used for sale

General SKU274U478 MakeVib Tech GmbH TypeSO 406/2020-UA No.1101002-01 Year of construction09-2010 Mounted on framecheck Main Features MaterialStainless steel Length2350 mm Width400 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter400mm Feeder length2350mm Closedcheck InletDia:250mm OutletDia: 175mm With vibro motorcheck With motor0,6kW,230/400Volt, 955rpm(EX) Without controlscheck MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace2,55x1,15m Total height1,2m Weight540kg CEcheck ATEX compatiblecheck Extra Specificationsthis vibrating feeder is equipped with CIP cleaning Vibro feedersVib TechConveying systems > Vibro feedersBrand > Vib Tech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

CONTROLS   PLC PRESS DESIGN   drive system: hydraulic   quick die change system: yes SLIDE   total force (nominal): 450 to   stroke: 230 mm SLIDE (HYDR. PRESS)   working velocity min.: 5 mm/s   working velocity max.: 70 mm/s   return velocity max.: 200 mm/s   return force: 200 to V-RING   nominal force: 200 to TOOL DIMENSIONS   lower table (left-right): 790 mm   lower table (front-back): 760 mm OVERALL SPECIFICATIONS (COIL LINES)   coil weight max.: 3 to COIL CHAIR   coil weight max.: 3 to STRIP-FEEDER   feeder type: roll feeder   band lubrication system: yes ELECTRICAL SPECIFICATIONS   total power consumption: 150 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS    ...

This BYSTRONIC Bystar Fiber 4020 fiber laser cutting machine was manufactured in 2017. It boasts a laser power of 4000W and can handle sheet sizes up to 4000x2000 mm, with a maximum sheet weight of 1900 kg. This robust machine is perfect for high-precision cutting tasks. The BYSTRONIC Bystar Fiber 4020 machine we have for sale represents an excellent opportunity for efficient and precise cutting operations. Reach out for further details regarding this fiber laser cutting machine.

This MicroStep Fiber MSF 4001.20L was manufactured in 2016. It features a 4m x 2m cutting table with hydraulic pallet changer, an automatic feeding tube cutting system for tubes up to 200mm diameter and 6m length, and a 4kW IPG YLS laser source. Includes Donaldson extraction and filtration equipment. Consider the opportunity to buy this MicroStep Fiber MSF 4001.20L fiber laser cutting machine. Contact us for more information.

General SKU279U510 MakeEscher Wyss LocationBarneveld TypeFTK 135/450 Main Features MaterialMild steel/Stainless steel Motor0.6 KW Surface1.35 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.35m² Bed sizes3000x450 mm Product inlet450x200 mm Product outletDia: 80 mm Number of sections:3 Air inletDia:380x300 (3x) Air outletDia: 270mm Vibro motor0,6 kW,220/380 volt, 980 rpm (2x) Without motorcheck MaterialMild steel, Stainless steel 1.4301 (304) Information No.2710214 Year of construction1980 Mounted on mild steel framecheck Floorspace3,8x1,03 m Total height2,7 m Weight2000kgFluid bed dryers continuousEscher WyssDryers > Fluid bed dryers continuousBrand > Escher Wyss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

PRESS DESIGN   drive system: hydraulic SLIDE   total force (nominal): 400 to SLIDE (HYDR. PRESS)   working velocity max.: 120 mm/s COUNTER RAM   nominal force: 100 to V-RING   nominal force: 200 to

General SKU397X1172 LocationBarneveld CEcheck MakeDSP-Filtertechnik TypeAMF 400-1 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Candle filter Candle filtercheck Notified bodyISW Trchnik Number of candles1 Candle sizesø 400 x 220 mm Liquid outlet25 mm Max. temperature200 °C Top connections2 x 10 mm Capacity40 Ltr. Vessel sizesø 425 x 270 mm Without candlescheck MaterialStainless steel 1.4571 (316Ti) Information No.936 Year of construction2009 Mounted on legscheck Floor space1,20 x 0,80 m Total height1,20 m Weight200 kg ATEX compatiblecheck Technical specs Extra informationFilter modules are available from DSP (OEM)Candle filtersDSPFilters > Candle filtersBrand > DSP What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination  ...

General SKU400X1192 LocationBarneveld CEcheck MakeDometic Main Features MaterialStainless steel Specified Features - Freeze dryer Freeze dryercheck Number of plates5 Plate sizes600x450 mm With cooling compressorcheck MakeDanfross TypeFR8,5GXNO Cooling mediumR134a Motor21 watt, 220-240 volt MaterialStainless steel Information TypeLR 400 No.8471181 With switchcheck Floorspace0,85x0,80 m Total height1,92 m Extra SpecificationsVolume 489 l.Freeze dryersDometicDryers > Freeze dryersBrand > Dometic What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Bystronic Fiber 4020 6KW was manufactured in 2015. It features a tool changer for sheet metal formats up to 2030 mm x 4030 mm and a 6kW fiber laser. The operator terminal is equipped with a touchscreen, USB interface, and runs on Windows XP. With low operating hours, this machine is ideal for precise cutting tasks. Contact us for more information.

General SKU358U924 LocationBarneveld MakeGuedu S.A. Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Motor30 KW Surface4 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface4,0 m² Capacity6050 l Vessel sizesø 2280 x 1800 mm Plate sizesø 2280 mm Top connectionscheck Solids outletø 270 mm Liquid outletDN 80 With jacketcheck Max. temperature-20ºC/+170ºC With stirrercheck Motor30 kW(400V, 1400 rpm, Ex) Stirrer speed20 rpm Stirrer can be liftedcheck With hydraulic unitcheck Motor4 kW (400V, Ex) MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Information TypeGRF 4000 Mach.No.960067 Year of construction1997 Mounted on legscheck Floorspace2,60 x 2,60 m Total height4,50 m Weight11000 kg ATEX compatiblecheckNutsche filtersGueduFilters > Nutsche ...

This 3-axis Bystronic BySprint Fiber 4020 6 kW was manufactured in 2017. It features a working area of 4064 mm in the X-axis and 2024 mm in the Y-axis, with a maximum sheet size of 4000 × 2000 mm and a maximum sheet weight of 890 kg. If you are looking to get high-quality laser cutting capabilities, consider the Bystronic BySprint Fiber 4020 6 kW machine we have for sale. Contact us for further details.

This 3-axis Bystronic BySprint Fiber 4020 + ByTrans Extended 4020 was manufactured in 2014. Ideal for precision fiber laser cutting, this machine ensures efficient operation and consistent performance. Consider the opportunity to buy this Bystronic BySprint Fiber 4020 + ByTrans Extended 4020 fiber laser cutting machine. Contact us for more information.

General SKU245P359 MakeMikropul Gmbh (DE) Type9-4 SC PSR No.4461 Year of construction1984 LocationBarneveld Main Features MaterialStainless steel Surface4 m2 Specified Features - Bag filter Envelope filtercheck Filter surface4 m² Number of envelopes:9 Envelope sizesdia.120mm x1200mm Cleaning by air pulsecheck Bag filters MaterialStainless steel Information Floorspace1,2x1,0 M Total height3,1 M Weight400 KG Extra Specificationswith extra filters easy change systemBag filtersHosokawa MikropulDust separators > Bag filtersBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU227T233 MakeUVA Packaging TypeNEWTON 400 I No.2003517 Year of construction2003 Mounted in framecheck Main Features MaterialStainless steel Specified Features - Powder filler Bag fillercheck Pneumatic fillingcheck Dosingmax. 3 kg Capacitymax. 120 bags/min. With motorcheck Information LocationBarneveld With switchgearcheck Floorspace2,2x1 m Total height2,6 m Weight950 kg CEcheck Extra SpecificationsTechnology Intermittent Motion Bag width 100-400 mm Bag width, block bottom 60-270 mm Front to back, block bottom 50-140 mm Bag length 600 mm Power consumption 10/12,5 kVA Air requirements 6 bar Maximum film roll width 840 mm (XL 1040) Maximum film reel diameter 700 mm Core diameter 76 mm or 156 mm Maximum machine output 120 bags/min. Machine weight approximately 950 kg Powder fillersPBB-UVAPackaging machines > Powder fillersBrand > PBB-UVA What you can expect f ...

Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Ziehl-Abegg, axial fan -Type: FE050-4EK.41.V7 -Power: 0.78 kW / 1250 rpm -Fan: Ø 585 mm -Number: 1x fan included -Price: per piece -Dimensions: 585/585/H185 mm -Weight: 13 kg/pc.

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: FB050-4EL.41.3P -Power: 0.64 kW -Dimensions: Ø 660 x 180 mm -Weight: 16 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: blower for air conditioning -Type: lFW25K (YDK25-6) -Voltage: 220 V / 25 W -Fan wheel: Ø 400 mm -Total dimensions: 400/190/H530 mm -Weight: 3.2 kg

RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

General SKU023C129 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure vapour evaporator6 Bar Main Features Surface12.5 m2 Specified Features - Falling film evaporator Falling film evaporator(1x) Heating surface12,5 m2 Tube capacity120 Ltr Number of tubes:34 Tube diameter40mm Tube length3000mm Shell capacity210 Ltr Max. temperature140 Degr. C. Capacityvessel 550 Ltr With jacket(coil), Capacity 10 Ltr MaterialStainless steel 1.4571 (316Ti)Falling film evaporatorsDiscountRutzColumns > Falling film evaporatorsDiscountBrand > Rutz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

6 feeders

Pneumatic round-table table 400 mm

We offer two Ford gas cogeneration plants for sale. Synchronous generator: Emod 19 KVA Engine: Ford Voltage: 230 / 400 3 phases Frequency: 50 Hz Speed: 1500 rpm COS phi: 0.8 Starter: 24 V Weight: 900 kg Year of construction: 1996 Hours of operation: 24,000

Block/SOS bag machine with flat inside handle device, Carrier bag machine, 53bb + 43ct Bag width: 14-32cm Bottom width: 6-20cm Tube length 35-70cm with fotocell for preprinted paper, 1 ply option: 2 plies option: 4 or 5 colour tail end printer

Mechanical sheet metal shears of excellent quality, for the burr-free precision cutting of sheet metal up to 1.2 mm sheet thickness steel sheet/ST40 – aluminium 1.5 mm, backdrop-guided knife beam Largest cutting length 4,080 mm, cutting angle 1.5° - up to 25 cutting strokes/min, NC - controlled rear stop with 750 mm travel range, slantable for conical cuttings - automatic removal of the stop rail at sections deeper than 750 mm - with forced-controlled sheet lifting device - automatic tipping device for the sheet metal cuttings into the section collection cart, Scissor table height 800 mm - scissor table width 300 mm - Scissor table extension up to 480 mm support width, dimensions 4.75 m x 1.68 m x H 1.46 m, drive power 2.2 kW, weight approx. 1,500 kg

Wing Mixer Wing Wheel Low Speed Mixer Propeller Agitator Propeller Mixer Xylems Flygt Banana SR Agitator used Low speed, highest efficiency Slow-running Flygt agitators are used when large amounts of liquid need to be stirred effectively and optimally during the treatment process. The result is outstanding efficiency. Manufacturer: FLYGT Type: M18-11-4AL / Banana SR agitator Propeller diameter approx. 1800 mm Wing/propeller length approx. 850 mm Wing/propeller width approx. 420 mm Diving motor Flygt 4430.010 690/400 V; 4.8/8.3 A; 50 Hz; IP68 4.0 kW; 1405 rpm Slow running submersible motor agitators Application: - Activated sludge treatment, conventional treatment, oxidation trench - Water reservoirs - Ice-free keeping - Oxygenation in lakes and ports - Biogas production tanks - Wastewater agitator Total approx. 1800 x 1300 x 600 mm Weight approx. 290  ...

Creo Lotem 400, year 2004 Model: Lotem 400 fiber head 4 page format, Manuel Loading Minimum plate size: 381 x 318 mm Max plate size: 750 x 622 mm F speed: 18 plates/hour resolution: up to 3556 dpi approximate number of plates produced: 107000 With HQ level 3 RIP version 7 installed on PC

Transformer - Voltage Transformer 500 --> 380V Manufacturer Flasshoff & Klosterberg Type DTB50kVA Power 50kVA Primaer 3x500V - 525 - 550 59A Sekundaer 3x380V 76A Hz 50-60 Insulating-Kl.E External dimensions: Transformer 1m wide 92cm high 46cm deep Inside 33cm deep 74cm wide 80cm high Weight 450kg Special price

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

MARK ANDY P5 – 430mm (8-colour) Age: 2017 8 Colour (Flexo) • Unwind Rewind ProLed System and Dryer The Cutting BST Powerscope 5000 Inspection System Sheeting station (Cross) Delam/Relam Cross cutting device 1 delivery belt Mark Andy VPM 400 Panel Mount Machine Meech web cleaning - double sided 2 PitStop trolleys to hold printing cylinder ink trays Impression and magnetic cylinders 48 impression cylinders 7 magnetic cylinders 2 ink trays with non-stick coating Servo-controlled feed unit with closed control loop 1 single-sided unwind for roll diameters up to 40 inches (1016mm), Vertical dancer system, web edge control, closed control loop 1 ultrasonic web edge control with 2 sensors 1 ultrasonic web break control Printing unit: Print and process maximum width 17 inches 431.8 mm Maximum web width 17.25 inches 438.2 mm Min. print processing width 8.5 in 216 m ...

Hydraulic round table FIBRO P10400UN with 3 jaw holder, for adaptations etc. division: 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 96

KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...

Stock number: 3290 INDUCTIONS HEATER Manufacturer: FAG, type: HEATER PSI 24-400 Machine no.: 10167, year of construction: 2011 Specifications: Automatic residual magnetism Max. 28 kVA

Used industrial robot including control system in very good condition, Ready for immediate use Suitable for welding/spot welding, machine operation, material handling and much more. Payload: 120 kg Reach: 2413 mm Axles: 6 With its six axles, the Fanuc S-420F is capable of precisely moving heavy payloads of up to 120 kg. Due to the wide range of possible applications, there are practically no limits to the Fanuc S-420F. It offers consistent cycle times and handles heavy lifting, spot welding, and pick & place effortlessly. Absolutely professional machine from the market leader for automation FANUC - yet easy to use / program. Despite its large working area, the robot requires a comparatively compact footprint. The Fanuc S-420F RJ2 is designed for ground mounting and weighs a whopping 1600 kg. Movement Speeds: J1 90 °/s (1.57 rad/s) J2 90 °/s (1.57 rad/s) J3 90 ...

MPS EF 410-8 UV Flexo printing machine Age: 2007 Max. web width: 416 mm Max. printing width: 410 mm Performance: 200 m/min Material Thickness: 20-350 micron Equipment: First Hand Single Unwind Unit S-1000 Infeed Unit Corona Treatment Teknek Web Cleaning Pre-Register Longitudinal registers 8x Flexo printing unit 8x Cooling Roller 8x GEW UV-dryer 1x Double Die Cutting Unit 1x BST Video inspection 1x Matrix Rewinder Unit Longitudinal Cut for Edge trim 1x Rewind Unit S-1000 1x Control Panel Accessories: 11x Magnet cylinder (Z98,104,108,114,120,126,130,138,145,169,180) Printing cylinder (Z98 – Z189/8 pieces from each one) 26x Anilox roller

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions

1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).

Analog module, brand new, CPX-4AE-P-D10, 560362, Original Festo, new Special price ! Attention: Original Festo product, no replica from.. The parts were taken from a brand new valve assembly in its original packaging and are completely as new. We still have several identical and many other Festo components, but the quantity is ending. Buy more than 1 position there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Aust ...

Second-hand decanter made by FLOTTWEG, model Z53-4454. Maximum bowl speed: 3250 rpm Max. sediment removal rate: 1,3 kg/dm3 Min/max product temperature: 0/100ºC Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Documentation CE Certificate Maintenance Manual Operation Manual Drawings Spare parts list Condition Inspected Made by FLOTTWEG