oerlikon 3 used for sale

A 2-stage plate heat exchanger W. Schmidt KG is available. Throughput capacity: 12000l/h, product temperature range: 5°C-93°C, max. operating pressure: 6bar, product: wort, machine dimensions X/Y/Z: approx. 1750mm/1750mm/600mm, weight: approx. 1000kg. Including 126 removed plates. On-site inspection is possible.

Haeusler VRM-HY-N - 3000 x 20 mm CNC Number of rolls: 4 Roll capacity cold: 3000 x 20 mm Pre-bending : Yes

Press force: 1100kN, screw diameter: 35mm, injection weight: 140g, stroke volume: 154cm³, injection pressure: 2429bar, max. barrel temperature: 375°C, weight: approx. 8000kg, control: MC 5 3.0, operating hours: 25271h, pump hours: 29098h. Including one linear robot KM LRX 150, travel X/Y/Z: 900mm/1200mm/3000mm, load capacity: 15kg. Documentation available. On-site inspection is possible.

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: mm : kg height adjustment: 750 - 1100 mm weight of the machine ca.: 0,80 t dimensions: 2,0 x 0,55 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of ram: 274 mm control: Cybelec ModEva Pac total power requirement: kW weight of the machine ca.: 17.000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 kN, 900 g/PS, 60 mm

Injection molding machine Krauss Maffei Km 300 1400 C1 BJ 1998

Brand PC 3001vario vacuum pump 2.0 m³/h, final vacuum 2.0 mbar

Injection moulding machine Krauss Maffei KM 125-390 C2 BJ 2004

Range of machines Manufacturer: OMSO Machine designation DM 385/6 BOX Year of Make: 2000 Operating hours approx. 31.950 Number of Printing Stations 6 Number of inking units 6 Number of Ground Pressure Stations 2 Number of ground printing inking units 2

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Injection moulding machine Arburg 320C 600/250 BJ 2002

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavy straightening plateLength 3050 mmWidth 2000 mmThickness 300 mmPanel thickness approx. 55 mm throughoutWeight approx. 4.5 ton.Good condition; used

Type: Lid Maho DMU35M Year of Make: 2003 Description: Spindle 20-6300rpm 10kW SK40 Feed speed X,Y,Z 5000mm/min Position tolerance (direct measuring system) 0.010mm Travel: X=350mm, Y=240mm, Z=340mm Other: Tool clamping pneumatic Rotary table with swivel axis manual Weight 1600kg Operating hours approx. 4000h Control Siemens NC810D Unfortunately, the tool spindle has a bearing damage and is therefore only able to run to a limited extent.

Permanent Magnet Brushless Servo Motor SIEMENS with ALPHA Spur GearServo Drive, Gear Motor, Servo GearType:1FT6105-8SF71-3EG1Series No. YF P921 8717 03 001Year of Manufacture: 2002Nominal Torque = MO: 54/65 NmNominal Current = Io: 36/45 ADreh Number = n. max.: 4500 rpmSpur Gear ALPHATyp: SP 210-MF2-20 -021-000Shaft Diameter 75 mmStump Shaft Length 105 mmCentering Diameter 180 mmCentering Diameter 35 mmBolt Circle Diameter 250 mm / 4 x 17 mm BoresHousing Dimension L/W/H 725 x 225 x

Electric motor, electric motor SIEMENSDrehstrom motor, power motorType 3LE16012BB233GB4Type V1Size 225MMotor speed 1475 rpm. Current consumption 84 AmpereMotor power 45 kWNet connection 400 Volt, 50 Hz.Shaft diameter 60 mmShaft pin length 140 mmKeyway width in the shaft 18 mmFlange diameter 450 mmCentering diameter 350 mmBolt circle 400 mmFlange motor with 8 mounting holes 18 mmLength motor housing without motor shaft 715 mmLength motor housing with

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

Battery interchangeable rack, transport rack, storage rack for forklift batteryChanging table, battery pallet, battery swapping system, battery swap trolleyManufacturer: WELUX 2.5Type: WS2-RR-2-300Load capacity: 2x 500 kg per compartment = 1000 kgSlide-in dimensions per compartment W x D = 300 x 920 mmSlide-in dimensions without centre bar W x D = 655 x 920 mmAdjustment height: 80 to 200 mm - centre bar can be dismantled - also suitable for sheet material - 16 pieces of galvanised steel castors 50 mm - 4 pieces of fixed castors 100 mm, 2 pieces rotatable with fixed castors

Hard rock slab, granite slab, granite blockHard stone block, angle block precisely machined on all sidesMeasuring cube, measuring plateLength: 1590 mmWidth: 300 mmHeight: 470 mm- 2 holes 80 mm- 2 holes 120 mm- Threaded bushings mainly M16, some with M12 and M18Weight: 570 kgGood condition; used

Magnetic Drilling Machine, Magnetic Drilling MachineCore Hole Drilling Machine, Metal Core Hole Drilling MachineDR. BENDER Type EK 323Masch No. 180543 year of construction approx. 1988Drilling capacity 23 mmSpindle holder MK 2Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mmDrilling unit 220 Volt, 50 Hz, 1025 WattE-Magnet 220 Volt, 50 Hz, 65 Watt- Spindle speed via 3 gear stages- Left and right rotation- E-magnet KOCH, type KL32/6- Drill head height adjustment guided in a linear guide- Manual expulsor- Drill stand on

MF welding machine with water-cooled impact pointMedium frequency impact pointManufacturer: TECNA (Italy) Type 3670 E CF00Serial No.: 00022 Year of construction 2014Nominal welding capacity 25 kVAMax. Welding power 160 kVANnet connection 400 volts, 50 Hz- Welding control TE750 or TE760- Impact point for one-sided spot welded joints- Ideal for repair work in the body area with the best welding quality- Water-cooled type 2BHPLN- Mobile transport trolleyWeight approx. 155 kgvery good condition - As good as new;

Reversible prism, 1-piece die block for die bending machineBending tool for press brakeReversible prism with 6 different prismsPrism size 30 mm with 3 mm radius for 90, 40 mm with 4.5 mm radius for 90 50 mm with 4 mm radius for 90, 18 mm for 90, 10 mm for 90 12 mm for 45Dimension 90 x 88 mmPrism length 3000 mmWeight 147 kgGood condition; used

MIG MAG Welding Machine, Shielded Gas Welding Machine CLOOS Type GLC 357 NMIG MAG Welding Power SourceFabr. No. 576 Year of construction approx. 1985Nominal power 350 Amp.Power 350 Amp. - 80% ED 310Amp. - 100% EDEinfinitely variable adjustment rangeConnecting hose package 4.5 metersMains connection 380 Volt, 50 Hz, 32 Amp. Plug - 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch- water-cooled-

DC main spindle drive, power converter device with digital control Simoreg V55Spindle module, drive controller, rectifier, DC regulatorManufacturer SIEMENSTyp SIMODRIVE 6RA2725-6DV55-0 D380/60 Mreq-GdG6V55-3A0Version V55 Basic unitInput voltage 3 AC 380 V Input frequency 50 / 60 HzInput current 49 AAoutput voltage 380 VDCAoutput current 60 ANenn power 22 kWAbdimension (W x H x D) 270 x 260 x 290 mmWeight approx. 25 kgThe drive controller is still Ready for operation in a guild master

Conveyor belt, trough conveyor belt, trough conveyor GASUS type DG 300-5/2,75Belt conveyor, conveyor belt, belt conveyorFabrig Nr: D-7321915 Year of construction 1996Effective length: 2.75 metersBelt width: 230/300 mmDeflection pulley diameter: 210 / 230 mm (rubberized drive roller)Deflection pulley width: 400 mmBelt speed: approx. 15 meters/min. Motor power: 0.75 kWNerg connection: 400 volts, 50 Hz - Drive via SEW geared motor- Inlet hopper 550 x 430 mm- Metal idler rollers with maintenance-free ball bearings- Strip tension via threaded spindles

Hard stone slab, granite slab, granite block, measuring cubeHard stone block, angle block precisely machined on all sidesThe granite slab comes from a measuring machineDimensions of the large table surface L x W x H: 1350 x 1000 x 300 mmDimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm- 5 pieces of base blocks with leveling screws approx. 400 mm- 8 pieces of threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm)- 4 pieces of threaded bushings M16- small chipping on eggs Top edgeOverall dimensions L x W x H: 1350 x 1350 x 300

Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040

Mitre cold circular saw BERG & SCHMID type MKS 350Year of construction approx. 1980Saw range at 90 Around 110 mmSaw area at 90 Rectangle 160 x 90 mmSaw area at 90 Square 95 x 95 mmSaw area at 45 Round 95 mmSaw area at 45 Rectangle 120 x 90 mmSaw area at 45 Square 80 x 80 mmSaw blade diameter max. 350 mmSaw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchableMains connection 380 volts, 50 Hz- motor with 2 electrically switchable speeds- infinitely variable

Conveyor belt, belt conveyor, belt conveyor, belt conveyor MTFMasch. No: Year of construction approx. 2015Effective length: 3200 mmBelt width: 490 mmBelt length: approx. 6550 mmFrame profile height: 47 mmPulley diameter: 30 mmBelt speed: 6 m/min. to 48 m/min. Conveyor belt height: approx. 960 to 1400 mmMotor power: 0.25 kWNet connection: 230 volts, 50 Hz.- infinitely variable belt speed via ABB frequency converter, type ACS150-03E-01A2-4- belt drive via RGM geared motor- belt body made of aluminium profile with stainless steel sheet metal cladding- 1

Z-conveyor, conveyor belt with metal link belt GÖSSLINGMetall belt conveyor, belt conveyor, floor conveyorMasch. No: 15867 Year of construction 2005Useful length: 3100 mmBelt width: 400 mmFrame profile height: 70 mmInsertion width: 465 mmInsertion length bottom: approx. 1500 mmLength conveyor belt slope: approx. 800 mmLength conveyor belt outlet top: approx. 600 mmHeight offset: approx. 170 mmBelt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mmInsertion height: approx. 1050 to 1270Motor power belt drive: approx. 0.37 kWNet connection 400